B08_-_Atch_2_-_Drawings.pdf

PDF 601 KB Posted Apr 22, 2026

Attached to: LAKE - TWO COMMUNICATIONS TOWER INSTALLATION AND O Federal contract opportunity
Solicitation number: 140P8126B0003
Issued by: Department of the Interior National Park Service Pacific West Region

About this file

Written by GovTribe AI · Apr 22, 2026

This document consists of technical engineering drawings and specifications for Valmont Industries cable ladder and V-frame antenna support assembly products.

The first section contains detailed assembly drawings for a 6-run cable ladder system (Part No. WCL6) with 20-foot galvanized steel construction. The bill of materials specifies 2 galvanized angle sections, 6 waveguide brackets, and associated hardware including 3/8" hex bolts, flat washers, lock washers, and nuts. A universal ladder attachment kit (CLK-U, sold separately) accommodates angles from 2" to 5" and requires a minimum of 2 kits per 20-foot section. Standard tolerances apply: ±0.030" for sawed/sheared/gas cut edges and holes, ±0.010" for laser cut edges and holes, and ±0.060" for assembly work. The proprietary drawings are marked as Valmont Industries trade secrets with restricted use.

The second section provides comprehensive engineering drawings for a 6-foot standard duty V-frame antenna support assembly with one stiff arm (Part No. VFA6-SD-S). The assembly includes 34 line items totaling 347.01 pounds, comprising welded support arms, pivot plates, backing plates, positioning plates, tie-back clips, crossover plates, clamp halves, galvanized pipe sections, and extensive fastening hardware (A325 bolts, threaded rods, U-bolts, and washers in 3/4", 5/8", and 1/2" sizes). The drawings include detailed angle calibration procedures with taper measurements, torque specifications (50 ft-lbs for locking bolts), and provisions for antenna mounting pipes ordered separately. The assembly requires separate procurement of Unistrut hardware (3/8" size) and equipment pipe hardware (1/2" size with 2-3/8" to 4-1/2" O.D. pipe). The final page shows a product marketing image for a universal round climbing leg safe climb system (RSC-50-G) with 50-foot galvanized cable, adjustable components, and OSHA/ANSI compliance.

View the file

Other files for this federal contract opportunity

Other files attached to LAKE - TWO COMMUNICATIONS TOWER INSTALLATION AND O, newest first.
File	Type	Posted
Sol_140P8126B0003_Amd_0001.pdf	PDF	May 12, 2026
B08_-_Atch_5_-_Construction_Contraction_Administration.pdf	PDF	Apr 22, 2026
Sol_140P8126B0003.pdf	PDF	Apr 22, 2026
B08_-_Atch_3_-_Wage_Determination_-_NV20260024.pdf	PDF	Apr 22, 2026
B08_-_Atch_4_-_Wage_Determination_-_AZ20260058.pdf	PDF	Apr 22, 2026
B08_-_Atch_1_-_Spec_3_Tower_Site_work_4_15.pdf	PDF	Apr 22, 2026
B08_-_Atch_6_-_Limitation_on_Subcontracting_Report_Template.xlsx	XLSX spreadsheet	Apr 22, 2026

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DETAIL A

DETAIL B

DETAIL C

THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF

VALMONT INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT

THE CONSENT OF VALMONT INDUSTRIES IS STRICTLY PROHIBITED.

TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:

SAWED, SHEARED AND GAS CUT EDGES (± 0.030")

DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES

LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES

BENDS ARE ± 1/2 DEGREE - ALL OTHER MACHINING (± 0.030")

ALL OTHER ASSEMBLY (± 0.060")

DESCRIPTION

DRAWING USAGE

CHECKED BYENG. APPROVAL

DRAWN BY

DWG. NO.

P A

G E

PART NO.

Engineering Support Team:

1-888-753-7446

CPD NO.

CEK

1 O F

WCL6BMC 1/17/2012

1/16/2012 WCL6

TOLERANCE NOTE

PROPRIETARY NOTE

Locations:

New York, NY Atlanta, GA Los Angeles, CA Plymouth, IN Salem, OR Dallas, TX

6 RUN

CABLE LADDER

CUSTOMER

SITE

PRO

valmont

PARTS LIST

NET WT.UNIT WT.LENGTHPART DESCRIPTIONPART NO.QTYITEM

103.1751.59240 in20' GALVANIZED ANGLEX-WCL21

12.302.05 6 RUN WAVEGUIDE BRACKETWG662

1.050.09 3/8" x 2" HDG HEX BOLT GR5G3802123

0.190.01 3/8" HDG USS FLATWASHERG38FW164

0.110.01 3/8" HDG LOCKWASHERG38LW165

0.540.03 3/8'' HDG HEAVY 2H HEX NUTG38NUT166

1.050.537 3/8 inSPLICE FOR GRIP STRUTSPLICE27

0.280.07 3/8" x 2-1/2" HDG HEX BOLT GR5G3821248

TOTAL WT. # 118.69

UNIVERSAL LADDER ATTACHMENT KIT

P/N: CLK-U (SOLD SEPARATELY) USE AT LEAST 2 KITS PER 20' SECTION

FITS ANGLES

2" TO 5"

1" TO 4-1/2"

ROUND MEMBERS

DESCRIPTION

DRAWING USAGE CHECKED BY

ENG. APPROVALDRAWN BY

DWG. NO.

CPD NO.

CEK

BMC 7/13/2017

6/20/2017 VFA6-SD-S

6' STANDARD DUTY

V-FRAME ASSEMBLY

W/ 1 STIFF ARMS

CUSTOMER VFA6-SD-S

CLASS SUB

PART NO.

81 02

P A

G E

TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:

SAWED, SHEARED AND GAS CUT EDGES (± 0.030")

DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES

LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES

BENDS ARE ± 1/2 DEGREE

ALL OTHER MACHINING (± 0.030")

ALL OTHER ASSEMBLY (± 0.060")

TOLERANCE NOTES

PROPRIETARY NOTE:

THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF

VALMONT INDUSTRIES IS STRICTLY PROHIBITED.

Engineering Support Team:

1-888-753-7446 valmont

Locations:

New York, NY Atlanta, GA Los Angeles, CA Plymouth, IN Salem, OR Dallas, TX

PARTS LIST

NET WT.UNIT WT.LENGTHPART DESCRIPTIONPART NO.QTYITEM

90.6945.34 SUPPORT ARM FOR STANDARD DUTY V-FRAME ASSEMBLYX-VFASD21

15.0815.08 DIAGONAL SLOT WELDMENT FOR BCAM SDX-SDTFLB12

16.6316.63 MULTI-HOLE TAPER PLATE WELDMENTX-SDMHTP13

18.189.0911 1/16 inPIVOT PLATEX-SDPP24

17.738.8612 inBENT BACKING PLATEX-LCBP225

8.488.48 STRAIGHT SLOT WELDMENT FOR BCAMX-SDCAMSS16

11.745.875 1/2 inSLIDING PIPE TIE BACK PLATEX-SPTB27

1.431.43 POSITIONING PLATE WELDMENT FOR BCAMX-SDCAMSP18

4.012.01 TIE BACK CLIP ANGLEX-TBCA29

14.833.716 inCROSSOVER PLATE 2-3/8" X 2-3/8"SCX1410

7.193.5912 1/16 inCLAMP HALF 1/2" THICK, 11-5/8" LONGMCP211

9.452.368 1/8 in1/2" THICK, 5-3/4" CNTER TO CENTER CLAMP HALFDCP412

53.8226.9184 in2-3/8" X 84" SCH 40 GALVANIZED PIPEP284213

40.7540.75126 in2-3/8" X 126" (2" SCH. 40) GALVANIZED PIPEP2126114

1.890.472 1/4 in3/4''-10 X 2-1/4" A325 BOLTA34214415

0.240.06 3/4" HDG USS FLATWASHERG34FW416

0.170.04 3/4" HDG LOCKWASHERG34LW417

0.850.21 3/4'' HDG HEAVY 2H HEX NUTG34NUT418

2.091.05 5/8" x 12" THREADED ROD (HDG.)G58R-12219

1.390.70 5/8" x 8" THREADED ROD (HDG.)G58R-8220

4.001.00 5/8" X 2-5/8" X 4-1/2" X 2" U-BOLT (HDG.)X-UB5258421

1.780.44 5/8" x 4" HDG HEX BOLT GR5 G5804422

0.540.27 5/8" x 2" HDG HEX BOLT GR5 G5802223

0.700.071/8 in5/8" HDG USS FLATWASHERG58FW1024

0.420.03 5/8" HDG LOCKWASHERG58LW1625

2.340.13 5/8'' HDG HEAVY 2H HEX NUTG58NUT1826

6.690.84 1/2" x 15" THREADED ROD (HDG.)G12R-15827

13.250.66 1/2" X 2-1/2" X 4-1/2" X 2" GALV. U-BOLTX-UB12122028

0.820.415 1/2 in1/2'' x 6-1/2" HDG HEX BOLT GR5 FULL THREADG12065229

0.300.304 1/2 in1/2'' x 4.5" HDG HEX BOLT GR5 FULL THREADG12045130

1.410.182 in1/2'' x 2" HDG HEX BOLT GR5G1202831

1.810.033/32 in1/2" HDG USS FLATWASHERG12FW5332

0.920.011/8 in1/2" HDG LOCKWASHERG12LW6633

4.800.07 1/2'' HDG HEAVY 2H HEX NUTG12NUT6734

TOTAL WT. # 347.01

A UPDATED BCAM VERSION 1 TO BCAM VERSION 2 CEK 8/17/2018

REVISION HISTORY

REV DESCRIPTION OF REVISIONS CPD BY DATE

ENG. APPROVALDRAWN BY

DWG. NO.

CPD NO.

CEK

BMC 7/13/2017

6/20/2017 VFA6-SD-S

6' STANDARD DUTY

V-FRAME ASSEMBLY

W/ 1 STIFF ARMS

CUSTOMER VFA6-SD-S

CLASS SUB

PART NO.

81 02

P A

G E

TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:

SAWED, SHEARED AND GAS CUT EDGES (± 0.030")

DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES

LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES

BENDS ARE ± 1/2 DEGREE

ALL OTHER MACHINING (± 0.030")

ALL OTHER ASSEMBLY (± 0.060")

TOLERANCE NOTES

PROPRIETARY NOTE:

THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF

VALMONT INDUSTRIES IS STRICTLY PROHIBITED.

Engineering Support Team:

1-888-753-7446 valmont

Locations:

New York, NY Atlanta, GA Los Angeles, CA Plymouth, IN Salem, OR Dallas, TX

LOWER

A -2.5° to 2.5°

1.7° to 6°B

UPPER

ANGLE CALIBRATING PROCEDURE:

1. MEASURE TOWER TAPER

AND PICK LOWER BRACKET

HOLE:

HOLE A = -2.5° TO 2.5°

HOLE B = 1.7° TO 6°

2. USE CALIBRATING BOLT

TO ADJUST FRAME TO

DESIRED TAPER

3. TORQUE LOCKING BOLTS

TO 50 ft.-lbs.

4. ADVANCE LOCKING NUT

TO POSITIONING PLATE,

THEN TIGHTEN.

8 13/32" ± 1-1/4"

31 15/16"

72" ±

30" VARIABLE

1-1/2" TO 8-5/8"

DIAMETER LEG

20°

MAX.

20°

MAX.

STEP 2

STEP 4

STEP 3

A UPDATED BCAM VERSION 1 TO BCAM VERSION 2 CEK 8/17/2018

DETAIL A

DETAIL B

DETAIL C

DETAIL D

DETAIL E DETAIL F

DETAIL G

DESCRIPTION

DRAWING USAGE CHECKED BY

ENG. APPROVALDRAWN BY

DWG. NO.

CPD NO.

CEK

BMC 7/13/2017

6/20/2017 VFA6-SD-S

6' STANDARD DUTY

V-FRAME ASSEMBLY

W/ 1 STIFF ARMS

CUSTOMER VFA6-SD-S

CLASS SUB

PART NO.

81 02

P A

G E

TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:

SAWED, SHEARED AND GAS CUT EDGES (± 0.030")

DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES

LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES

BENDS ARE ± 1/2 DEGREE

ALL OTHER MACHINING (± 0.030")

ALL OTHER ASSEMBLY (± 0.060")

TOLERANCE NOTES

PROPRIETARY NOTE:

THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF

VALMONT INDUSTRIES IS STRICTLY PROHIBITED.

Engineering Support Team:

1-888-753-7446 valmont

Locations:

New York, NY Atlanta, GA Los Angeles, CA Plymouth, IN Salem, OR Dallas, TX

OROR 2219

2-3/8" ANTENNA MOUNTING PIPES

(ORDERED SEPARATELY)

7/16" LUG HOLES

REVIEW CARRIER STANDARDS FOR

PROPER SURFACE PREPARTION AND

ASSEMBLY OF ELECTRICAL CONNECTIONS

9/16" SLOTTED HOLE

FOR EQUIPMENT PIPE U-BOLT

A UPDATED BCAM VERSION 1 TO BCAM VERSION 2 CEK 8/17/2018

ENG. APPROVALDRAWN BY

DWG. NO.

CPD NO.

CEK

BMC 7/13/2017

6/20/2017 VFA6-SD-S

6' STANDARD DUTY

V-FRAME ASSEMBLY

W/ 1 STIFF ARMS

CUSTOMER VFA6-SD-S

CLASS SUB

PART NO.

81 02

P A

G E

TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:

SAWED, SHEARED AND GAS CUT EDGES (± 0.030")

DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES

LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES

BENDS ARE ± 1/2 DEGREE

ALL OTHER MACHINING (± 0.030")

ALL OTHER ASSEMBLY (± 0.060")

TOLERANCE NOTES

PROPRIETARY NOTE:

THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF

VALMONT INDUSTRIES IS STRICTLY PROHIBITED.

Engineering Support Team:

1-888-753-7446 valmont

Locations:

New York, NY Atlanta, GA Los Angeles, CA Plymouth, IN Salem, OR Dallas, TX

UNISTRUT AND HARDWARE

SOLD SEPARATELY.

REQUIRES 3/8" HARDWARE

EQUIPMENT PIPE AND HARDWARE

SOLD SEPARATELY.

REQUIRES 1/2" HARDWARE

AND 2-3/8" TO 4-1/2" O.D. PIPE

A UPDATED BCAM VERSION 1 TO BCAM VERSION 2 CEK 8/17/2018

File details come from the government source that posted it. Updated Apr 22, 2026.