B08_40622956_Attachment_7_Subcontracting_Percentage_Worksheet.docx
DOCX document 95 KB Posted
- Attached to
- ELMA-CREATE UNIVESALLY ACCESSIBLE TRAIL Federal contract opportunity
- Solicitation number
- 140P1324R0004
About this file
This document is a Subcontracting Percentage Worksheet related to a federal contract opportunity for Landscape Maintenance services issued by the National Park Service National Capital Region. The worksheet provides instructions for calculating the subcontracting labor percentage, which must be demonstrated to comply with FAR clause 52.219-14. It requires the prime contractor to provide their direct labor, fringe benefits, and general and administrative (G&A) costs, as well as the subcontractor's direct labor and G&A costs. The subcontracting labor percentage is then calculated using a formula. This worksheet is likely a required attachment for the solicitation.
The related federal contract opportunity, solicitation number 140P1324R0004, is for the ELMA-CREATE UNIVESALLY ACCESSIBLE TRAIL project issued by the Department of the Interior National Park Service Intermountain Region.
View the file
Other files for this federal contract opportunity
Show all 22
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Department of the Interior
NATIONAL PARK SERVICE
NATIONAL CAPITAL AREA REGION 1
1100 Ohio Drive S.W.
Washington, D.C., 20242
NPS-National Capital Region Solicitation: 140P3019R0015 – Landscape Maintenance Page 2 of 2
SUBJECT: FAR CLAUSE 52.219-14, SUBCONTRACTING PERCENTAGE WORKSHEET
PRIME CONTRACTOR: _________________________ Date:____________
SUBCONTRACTOR: ___________________________
Is the subcontractor listed similarly situated? YES | NO (circle one) *Note: Only one Subcontractor shall be listed per from!
To calculate, either follow the below directions OR right click the above Excel ‘Object’ and select ‘Worksheet Object’ then ‘Edit’. You can then input Direct Labor/Fringe Benefits/G&A % and it will calculate for you.
a) To calculate the subcontracting percentage, first add DIRECT LABOR and FRINGE BENEFITS and enter the figures for the prime contractor in space (A) and for the subcontractor (if available)*** in space (B).
b) Next, calculate the LABOR G&A by multiplying the G&A rate by the SUBTOTAL figure in space (A).
c) Calculate the subcontractor's LABOR G&A by multiplying the subcontractor's G&A rate by the subcontractor's SUBTOTAL figure in (B).
d) Add the LABOR G&A to the SUBTOTAL and record that figure in the spaces for TOTAL LABOR COSTS at (C) and (D) respectively.
e) Next, using the formula below, calculate the subcontracting labor percentage.
____(D)____
(C) + (D)
SUBCONTRACTING LABOR COST PERCENTAGE = ____%
*The firm must demonstrate that their labor overhead is allowable in accordance with FAR 3l.205- 6(m). Failure to do so will cause the entire overhead to be eliminated from the calculations.
**G&A denotes General and Administrative Costs ***You need to compare as like figures as possible. Therefore, if you have a breakdown of the subcontractor's costs use it in the formulation above. If you do not have a breakdown you need to use the TOTAL SUBCONTRACTING AMOUNT for item (D) even though you must still breakdown the contractor's costs.
NPS-ConOps Central Santa Fe MABO Page 1 of 1
FOR OFFICIAL USE ONLY
SOURCE SELECTION INFORMATION – SEE FAR 3.104
Preserving unimpaired the natural and cultural resources and values of the national park system for the enjoyment, education, and inspiration of this and future generations.
FOR OFFICIAL USE ONLY
SOURCE SELECTION INFORMATION – SEE FAR 3.104
image1.emf
Microsoft_Excel_Worksheet.xlsx Sheet1
PRIME CONTRACTOR SUBCONTRACTOR
DIRECT LABOR $0.00 $0.00
FRINGE BENEFITS $0.00 $0.00
SUB TOTAL (A)$0 (B)$0
LABOR G&A** @ $0.00 $0.00
TOTAL LABOR COST (C)$0 (D)$0
Subcontracting Labor Percentage ERROR:#DIV/0!
image2.jpeg image3.jpeg
File details come from the government source that posted it. Updated .