B.0 8 Attach 2 PWS UPS-Cooling_Replacement-Upgrade -.pdf

Date:

1.1 Scope

1.2 Objectives

1.3 Background

1.4 Place and Performance of Services

Start End

Telework AT Level I Training ATCTS Registration CaC/TASS Application iWatch Training OPSEC Level 1 Training Background Check Information Assurance Training Classified Access TARP Training Combating Trafficking In Person Contractor Travel Joint Travel Regualtion

Performance Work Statement

1.5 Period of Performace

1.6: Quality Assurance: The Government will evaluate the contractor’s performance under this contract in accordance with FAR 52.246-4. This evaluation is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards.

1.7 Check All That Apply (See More Info in 6.0 Additional Information)

1.0 General

1.8 Additional Information

5.1: The contractor shall

Technical Rep Date

Contracting Officer (KO) Date

5.0: Requirements

6.0: Additional Information

2.0: Reserved

3.0: GFP/M/E/S

3.1: Will the Government be furnishing the necessary workspace/equipment/services/utilities for the contractor to perform services outlined in this PWS? If yes, include attachment of GFP/M/E/S.

4.0: CFP/M/E

4.1: Will the Contractor be required to furnish everything required to perform these services as outlined in this PWS? If yes, include attachment of CFP/M/E/S.

2. Remove and replace UPS system and batteries Text6: The 153d Communications Squadron(153 CS) is responsible for maintaining mission-ready network devices and ensuring maximum uptime is achieved by devices in the Datacenter. In order to ensure this, an Uninterrupted Power Supply (UPS) system was put into place that will carry the building’s power load until commercial power is restored or a backup generator can provide power to the facility. This UPS system, including required cooling system, is outdated and no longer serviceable. The entire system will needs to be replaced in order to ensure maximum uptime of critical servers, routers, enterprise access points, and network security appliances. Due to the lack of certified UPS technicians, the 153 CS requires professionally trained personnel to assist with replacement, installation, and maintenance of the UPS and Cooling systems.

2. Remove One (1) PX80 UPS and then replace One (1) PX 100KW Frame (de-rated to 80KW) 208V, 4-Wire Modular UPS. The new UPS is populated to 60KW+1 with (7) 10KW Power modules just like the previous. UPS will be wired for a max of 80KW to reuse the same input feed currently installed. Includes Twelve (12) Rows of Battery to allow for 18-Minutes at 60KW Load as well as a 3CB Bypass with output distribution breakers. Output distribution to include (20) 1P20A breakers and the reuse of (3) 3P125A. New UPS requires the feeder breaker into the data center to be provided with a shunt trip breaker upstream. This allows for connection to the existing EPO. (Previous UPS did not require a shunt trip). System is (4) Cabinets total: Bypass/Distribution, UPS, (2) Battery.