Attachment No. 5 - Turbine Specifications.pdf

57 KB Posted

Attached to
2025 Distributed Wind Turbine Competitiveness Improvement Project
Solicitation number
RFX-2025-10018
Issued by

About this file

Written by GovTribe AI ·

This is an attachment providing specifications requirements for turbines and inverters as part of the 2025 Distributed Wind Turbine Competitiveness Improvement Project. The document requests detailed technical information about turbine specifications including configuration type (VAWT or HAWT), orientation, number of blades, rotor dimensions, swept area, power regulation type, rated power, RPM range, yaw control, gearbox details, generator type, and electrical output specifications. Component OEMs with turbine partnerships must provide turbine data, while others can use representative data or modify the table for their specific component.

The attachment also requires inverter specifications including input voltage range, maximum input current, efficiency ratings, output voltage, frequency, power factor, and maximum continuous output current. The document appears to be a technical requirements template dated December 17, 2024, that bidders must complete as part of their proposal submission for the Department of Energy Office of Science's distributed wind turbine improvement initiative.

View the file

Other files

File Type Posted
Amendment No. 1 to RFX-2025-10018 - 2025 Distributed Wind Turbine Competitiveness Improvement Project-1.pdf PDF
Attachment No. 4 - Figure of Merit - Cost of Energy.pdf PDF
Attachment No. 1 - Statement of Work.pdf PDF
Supplement_to_Attachment_4_LCOE.xlsx XLSX spreadsheet
Attachment No. 2 - Sample Subcontract.pdf PDF
Attachment No. 7 - Concept paper template 2025.docx DOCX document
CIP 2025 Request for Proposal RFX-2025-10018.pdf PDF
Attachment No. 6 - Deliverable Summary Table 2025.xlsx XLSX spreadsheet
Attachment No. 3 - Eligibility Verification.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Attachment No. 5

TURBINE/INVERTER SPECIFICATIONS

12/17/2024

Component OEMs that have a turbine OEM partner or collaborator should fill in the information for the turbine, if not they can use data from a representative turbine or modify the table to cover just their component or system.

Turbine Name:

Configuration (VAWT or HAWT) Orientation (upwind or downwind) Number of blades Rotor diameter (and height if VAWT) Swept area (m2) Power regulation type (pitch, stall, furling, etc.)

Rated power (certified, measured, or projected) kW at m/s

RPM range Yaw control type Gearbox type and ratio Generator type Electrical output Voltage Phase

AEP (6 m/s Rayleigh)

INVERTER SPECIFICATIONS

Inverter name

Input voltage range VDC

Max input current ADC

Peak inverter efficiency

Max inverter output

Output voltage (nominal)

Frequency

Power factor

Output voltage options VAC

Max continuous output current RMS Amps

File details come from the government source that posted it. Updated .