ATTACHMENT_III_-_TIRE_RETREAD.docx
DOCX document 17 KB Posted
- Attached to
- New Tires, Retread, and Flat Repair Services
- Solicitation number
- 2024-18
- Issued by
- Essex County, Texas
About this file
This document is Attachment III for Tire Retread services issued by the City of Edinburg's Solid Waste Management Department in Texas. The attachment specifies detailed requirements for tire retread services, focusing on specific tire sizes (11R22.5 and 315/80R22.5) with precise tread depth specifications. The retread services mandate the use of specific mold treads from Michelin XDY or Bandag BDM, designed for mixed service use including refuse and construction industries, with requirements for chip/cut resistance and enhanced traction.
The specification requires bidders to meet exact technical standards, with a strict requirement that any exceptions must be pre-approved by the City and accompanied by an exemption letter. The document emphasizes that blank line items or failure to meet specifications may result in bid rejection. While the attachment does not specify contract duration, pricing, or total quantities, it provides highly specific technical requirements for tire retread services, indicating a technical procurement process focused on precise performance and quality standards for municipal vehicle tire maintenance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| New_Tires,_Retread,_and_Flat_Repair_Services.pdf | ||
| Rules_for_Electronic_Bidding__(2).pdf | ||
| New_Tires,_Retread_and_Flat_Repair_Services_Agreement.pdf | ||
| Section_for_Uploads.docx | DOCX document | |
| ATTACHMENT_IV_-_CONSTRUCTION,_AG,_AND_IMPLEMENT_TIRES.docx | DOCX document | |
| ATTACHMENT_V_-_SPECIALTY_TIRES_(FIRE_EMERGENCY_SERVICES).docx | DOCX document | |
| ATTACHMENT_I_-_STEERING_AXLE_TIRES.docx | DOCX document | |
| Bidders_List_-_New_Tires,_Retread_and_Flat_Repair_Services.doc | DOC document | |
| New_Tires,_Retread_and_Flat_Repair_Services_Agreement.docx | DOCX document | |
| ATTACHMENT_II_-_DRIVE_AXLE_TIRES.docx | DOCX document | |
| ATTACHMENT_VII_-_SERVICE_CALLS.docx | DOCX document | |
| ATTACHMENT_VI_-_SPECIALTY_TIRES_(PICK_UP_TRUCKS).docx | DOCX document |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT III
| TIRE RETREAD |
| INITIALS |
If any line item or specific cost of a line item is left blank in either the Proposal or the Specification Attachment Sheet, the City will assume the bidder cannot meet the specifications or the request for that line item and may cause the rejection of the bid.
| 13. |
| RETREAD SERVICES – The mold tread SHALL be (Michelin XDY or Bandag BDM Tread) designed for mixed service use; on/off road service; designed for refuse and construction industry. Molded tread must contain compound for chip/cut resistance and shall be traction enhanced and conform to the mold for Michelin XDY or Bandag BDM Tread. |
Listed are the Acceptable Specifications and Model Numbers for this type Tire application. All exceptions to these specifications must be Pre-Approved by the City and the Exemption Letter must accompany the bid for consideration.
| 11R22.5 |
| Listed above are the Acceptable Specifications for this type Tire application. All exceptions to these specifications must be Pre-Approved by the City and the Exemption Letter must accompany the bid for consideration |
| Tread Depth Minimum: 26/32nds or better |
| 315/80R22.5 |
| Listed above are the Acceptable Specifications for this type Tire application. All exceptions to these specifications must be Pre-Approved by the City and the Exemption Letter must accompany the bid for consideration |
| Tread Depth Minimum: 32/32nds or better |
File details come from the government source that posted it. Updated .