The file's text, extracted by GovTribe without its formatting.
ATTACHMENT I
STEER AXLE TIRES
| NEW TIRE SPECIFICATION – (EXCLUDING SPECIALTY TIRES) |
| INITIALS |
If any line item or specific cost of a line item is left blank in either the Proposal or the Specification Attachment Sheet, the City will assume the bidder cannot meet the specifications or the request for that line item and may cause the rejection of the bid.
REFUSE/SANITATION/EXTREME SERVICE TIRES
NEW TIRE PURCHASE: Bidders will be responsible to secure proper stock after being advised of their award. Tires SHALL BE TIER I PREMIUM TIRES; “FIRST LINE QUALITY” produced by the manufacturer and shall carry the company name; Tires SHALL BE OEM OR BETTER; GOODYEAR/DUNLOP, MICHELIN/BF GOODRICH OR BRIDGESTONE/FIRESTONE ONLY, unless otherwise noted and accepted by the City, prior to the submittal of the bid.
(MANUFACTURE AND QUALITY EXEMPTION “ACCEPTANCE LETTER” SHALL BE BOUND WITH THE BID INCLUDING ALL APPLICABLE SPECIFICATIONS HIGHLIGHTED, REFERENCING THE SPECIFIC BID ITEM NUMBER(S) CONSIDERED FOR THE ALTERNATE SPECIFICATION.)
Quality: Tires SHALL BE TIER I PREMIUM TIRE’S; “FIRST LINE QUALITY” produced by the manufacturer and shall carry the company name; Tires SHALL BE OEM OR BETTER; GOODYEAR/DUNLOP, MICHELIN/BF GOODRICH OR BRIDGESTONE/FIRESTONE ONLY. Suppliers may be required to submit proof that tires offered meet the specification listed.
| 1. |
| All Tires Must Meet or Exceed the Following: Manufactured for Extreme Service Applications; Shall meet or exceed specification for on/off highway use; use in mixed or improved and aggressive on/off road surfaces. |
| 2. |
| The tires shall be new; TIER I PREMIUM TIRE’S; “FIRST LINE QUALITY” produced by a listed manufacturer and carry the company name. |
| 3. |
| All tires shall be Radial and of Tubeless Design, unless otherwise noted and accepted by the City. |
| 4. |
| All Tires must be manufactured using Optimized Tread Compound/Waste Haul Tread Compound. |
| 5. |
| All Tires must have Full Width Protector Ply. |
| 6. |
| All Tires must have at a minimum Three Steel Belt Construction |
| 7. |
| All Tires must have Rectangular Bead Structure/Rounded Bead Structure. |
| 8. |
| All Tires must have Side Wall Wear indicators. |
| 9. |
| All Tires must have Curb Guards. |
| 10. |
| Tires shall have a belt crown package for extended casing life; promoting retreadibility and protects the working plies from shocks, bruises and impacts. |
| 11. |
| Tires must be an All Position or Steering Optimized Radial; optimized for exceptional traction and wear in mixed and severe on/off road service. |
Listed are the Acceptable Specifications and Model Numbers for this type Tire application. All exceptions to these specifications must be Pre-Approved by the City and the Exemption Letter must accompany the bid for consideration.
(MANUFACTURE AND QUALITY EXEMPTION “CITY APPROVED AND ACCEPTANCE LETTER” SHALL BE BOUND WITH THE BID INCLUDING ALL APPLICABLE SPECIFICATIONS HIGHLIGHTED, REFERENCING THE SPECIFIC BID ITEM NUMBER(S) CONSIDERED FOR THE ALTERNATE SPECIFICATION.)
| 11R22.5 |
| Goodyear Endurance WHA, G289, G296, G751; Michelin X WORKS Z, XZY3, XZY or XZU, XZU2, XZUS OR Michelin X ONE; Bridgestone M760, M726, M713, M870, M864 or equal manufacture approved |
| Load Range “H” |
| Minimum 16 Ply |
| Tread Depth Minimum 20/32nds |
| 315/80R22.5 |
| Goodyear Endurance WHA, G289, G296, G751; Michelin X WORKS Z, XZY3, XZY or XZU, XZU2, XZUS OR Michelin X ONE; Bridgestone M760, M726, M713, M870, M864 or equal manufacture approved |
| Load Range “L” |
| Minimum 20 Ply |
| Tread Depth Minimum 23/32nds |
| 385/65R22.5 |
| Goodyear G296; Michelin XZY3; Bridgestone M864 or equal manufacture approved |
| Load Range “J” |
| Minimum 18 Ply |
| Tread Depth Minimum 22/32nds |
| 425/65R22.5 |
| Goodyear Endurance WHA, G289, G296, G751; Michelin X WORKS Z, XZY3, XZY or XZU, XZU2, XZUS OR Michelin X ONE; Bridgestone M864 or equal manufacture approved |
| Load Range “L” |
| Minimum 20 Ply |
| Tread Depth Minimum 23/32nds |