Attachment Exhibit A- DD1423 LOGEN CDRLs A001-A011 RFP Final.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of

Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER MGMT

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

Logistics and Engineering (LOGEN) Support Services

N68520-22-R-0001 TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A001 Briefing Materials Summary Report

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-MGMT-81605

SOW 3.1.3; 3.3.6.2; 3.4.14.23; FST SITE SUPPORT LOCATIONS

FRC-E, SE, AND SW

INSERT IN

SECTION B

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

SUBMISSION

14. DISTRIBUTION

LT

ASREQ SEE BLK 16

b. COPIES

8. APP CODE SEE BLOCK 16 11. AS OF DATE 13. DATE OF SUBSEQUENT

a. ADDRESSEE

Draft Final

N/A

N/A SEE BLK 16

Reg

Repro

16. REMARKS:

BLOCK 4 – CONTRACTOR FORMAT IS ACCEPTABLE, USING MICROSOFTOFFICE

TOOLS AS REQUIRED (FOR EXAMPLE, MS POWER POINTPRESENTATIONS).

BLOCK 9: A DISTRIBUTION STATEMENT IS REQUIRED AND SHALL BE OBTAINED FROM

THE GOVERNMENT BY THE CONTRACTOR IN INDIVIDUAL TASK ORDERS FOR

DELIVERY OF THE DATA ITEM.

BLOCK 12 & 13: SUBMIT AS REQUIRED, SUBSEQUENT SUBMISSIONS AS REQUIRED BY

THE GOVERNMENT IN INDIVIDUAL TASK ORDERS. GOVERNMENT DISPOSITION OF

APPROVAL/DISAPPROVAL WILL BE WITHIN 20 BUSINESS DAYS UNLESS OTHERWISE

SPECIFIED. IF THE CDRL IS DISAPPROVED, THE CONTRACTOR SHALL HAVE 10

BUSINESS DAYS TO RESUBMIT THE CDRL.

BLOCK 14 – See Clause 5252.247-9505 TECHNICAL DATA ANDINFORMATION (NAVAIR) (FEB 1995) in Section F FOR ELECTRONIC DELIVERY ADDRESSES.

DELIVER ELECTRONICALLY VIA EMAIL IN MS OFFICE OR COMPATIBLE FORMAT

COR

TOCOR

TPOC

ATPOC (AS APPLICABLE)

* The Office of the COR is NOT to receive any CLASSIFIED material. ** 15. TOTAL

G. PREPARED BY H. DATE

I. APPROVED BY

J. DATE

DD Form 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED

INSTRUCTIONS FOR COMPLETING DD

FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM -

Technical Manual; Other - other category of data, such as "Provisioning,"

"Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award). Item

F. Self-explanatory (to be filled in after contract award). Item G.

Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the

Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items

12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort

(production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to

Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data.

The Government's right to use the data shall be governed by the pertinent provisions of the contract.

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO NOT

RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER ADMIN

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

A002 Meeting Minutes Conference/Meeting Minutes

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-ADMN-81250C SOW 3.1.2.3; 3.1.3; 3.4.14.23 FRC SITE SUPPORT LOCATIONS

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

NO

MTHLY SEE BLOCK 16

8. APP CODE D 11. AS OF DATE 13. DATE OF SUBSEQUENT

a. ADDRESSEE Draft

BLOCK 4: DID REQUIREMENT ITEM 2 CONTRACTOR FORMAT, COMPATIBLE WITH

GOVERNMENT APPPLICATIONS, IS ACCEPTABLE WITH GOVERNMENT APPROVAL.

BLOCK 9 – DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S.

DoD CONTRACTORS ONLY TO PROTECT TECHNICAL OR OPERATIONAL DATA OR

INFORMATION FROM AUTOMATIC DISSEMINATION UNDER THE INTERNATIONAL

EXCHANGE PROGRAM OR BY OTHER MEANS. THIS PROTECTION COVERS

PUBLICATIONS REQUIRED SOLEY FOR OFFICAL USE OR STRICTLY FOR

ADMINISTRATIVE OR OPERATIONAL PURPOSES. THIS STATEMENT MAY APPLY TO

MANUALS, PAMPHLETS, TECHNICALORDERS, TECHNICAL REPORTS, AND OTHER

PUBLICATIONS CONTAINING VALUABLE TECHNICAL OR OPERATIONAL DATA.

BLOCKS 12 & 13: SUBMIT THE 15th CALENDAR DAY OF EACH MONTH. IF THE 15TH

FALLS ON A WEEKEND OR HOLIDAY, THE DATE OFSUBMISSION IS THE NEXT

REGULAR BUSINESS DAY.

BLOCK 14 – See Clause 5252.247-9505 TECHNICAL DATA AND INFORMATION (NAVAIR)

TPOC

ATPOC (AS APPLICABLE)

G. PREPARED BY

H. DATE

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO

NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER MISC

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TDB

A003 Scientific and Technical Reports Engineering Change Proposal (ECP)

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-MISC-80711A SOW 3.1.3; 3.1.3.8; 3.3.3;

3.3.4.5; 3.3.9; 3.3.9.2; 3.3.9.3;

3.3.9.4; 3.3.11

FRC SITE SUPPORT LOCATIONS

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

8. APP CODE SEE BLOCK 16 11. AS OF DATE

13. DATE OF SUBSEQUENT

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS: Engineering Change Proposals (ECPs) provide engineering analysis and technical studies that propose solutions for Task Order Requirements.

BLOCK 7 & 8: REFER TO BLOCK 14 AS THE TPOC IS THE REVIEWING ACTIVITY. AT

THE DISCRETION OF THE GOVERNMENT, CDRL DISPOSTION MAY BE FURNISHED

VIA EMAIL.

BLOCK 9: A DISTRIBUTION STATEMENT IS REQUIRED AND SHALL BE OBTAINED

FROM THE GOVERNMENT BY THE CONTRACTOR IN INDIVIDUAL TASK ORDERS FOR

DELIVERY OF THE DATA.

BLOCKS 12 & 13: SUBMIT AS REQUIRED BY THE GOVERNMENT IN INDIVIDUAL TASK

ORDERS. GOVERNMENT DISPOSITION OF APPROVAL / DISAPPROVAL WILL BE

WITHIN 20 BUSINESS DAYS UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS

DISAPPROVED, THE CONTRACTOR SHALL HAVE 10 BUSINESS DAYS TO RESUBMIT

THE CDRL.

* The Office of the COR is NOT to receive any CLASSIFIED material. *

ACOR

TPOC

ATPOC (AS APPLICABLE)

15. TOTAL

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of

Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

A004

Technical Directives (TD)

Technical Directives (TD) in support of bulletins, Rapid Action Minor

Engineering Changes (RAMECs) and

Engineering Change Proposals (ECPs)

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-SESS-81269C SOW 3.1.3; 3.3.9.5 FRC SITE LOCATIONS FRC-E, SE,

AND SW

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

13. DATE OF

SUBSEQUENT

SUBMISSION

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS

DID REQUIREMENTS ITEM 2 (FORMAT) – CONTRACTOR FORMAT IS ACCEPTABLE,

PENDING GOVERNMENT APPROVAL.

DID REQUIREMENTS ITEM 3 (CONTENT) – DELIVERY SHALL CONSIST OF VARIOUS

TECHNICAL DOCUMENTS, AS REQUIRED, INCLUDING: REPORTS, PLANS, STUDIES

AND ANALYSES, TRAINING MATERIAL, ASSESSMENTS, BRIEFINGS, STRATEGIES,

BUDGETING AND COST ESTIMATES, POA&MS, ETC.

FROM THE GOVERNMENT BY THE CONTRACTOR IN INDIVIDUAL TASK ORDERS

FOR DELIVERY OF THE DATA.

BLOCKS 12 & 13: SUBMIT AS REQUIRED BY THE GOVERNMENT IN INDIVIDUAL

TASK ORDERS. GOVERNMENT DISPOSITION OF APPROVAL / DISAPPROVAL WILL

BE WITHIN 20 BUSINESS DAYS UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS

DISAPPROVED, THE CONTRACTOR SHALL HAVE 10 BUSINESS DAYS TO

RESUBMIT THE CDRL.

BLOCK 14 – See Clause 5252.247-9505 TECHNICAL DATA ANDINFORMATION (NAVAIR) (FEB 1995) in Section F FOR ELECTRONIC DELIVERY ADDRESSES.

TPOC

ATPOC (AS APPLICABLE)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO

NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A005 Developmental Design Drawings/Models and

Associated Lists Developmental Drawings /Models and Associated Lists

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-SESS-81002F SOW 3.1.3; 3.3.1; 3.3.5; 3.3.6.1;

3.5.19.2

FRC SITE LOCATIONS FRC-E, SE,

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS

DID REQUIREMENTS ITEM 3 (FORMAT) – THE CONTRACTOR FORMAT OR THE

GOVERNMENTS FORMAT AS SPECIFIED ON THE TDP OPTION SELECTION

WORKSHEET INCORPORATED INTO THE TASK ORDER.

DID REQUIREMENTS ITEM 4 (CONTENT) – DELIVERY SHALL CONSIST OF

DEVELOPMENTAL DESIGN DRAWINGS / MODELS AND ASSOCIATED LISTS THAT

DEFINE AN ENGINEERING DESIGN APPROACH IN DETAIL.

DELIVERY OF THE DATA.

BLOCKS 12 & 13: SUBMIT AS REQUIRED BY THE GOVERNMENT FOR SPECIFIC TASK

ORDER. GOVERNMENT DISPOSITION OF APPROVAL / DISAPPROVAL WILL BE

WITHIN 20 BUSINESS DAYS UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS

DISAPPROVED, THE CONTRACTOR SHALL HAVE 10 BUSINESS DAYS TO RESUBMIT

THE CDRL.

* The Office of the COR is NOT to receive any CLASSIFIED material. **

TOCOR

TPOC

ATPOC (AS APPLICABLE)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO

NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER MGMT

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A006 STATUS REPORT Total Case Incident Rate and Days

Away Restricted Time (TCIR/DART)

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-MGMT-80368A

SOW 3.1.3; 3.1.15 FRC SITE LOCATIONS FRC-E, SE,

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

ANNUAL SEE BLOCK 16

8. APP CODE E 11. AS OF DATE 13. DATE OF SUBSEQUENT

a. ADDRESSEE

Draft

N/A ANNUAL

BLOCK 4: TAILORED DID REQUIREMENTS ITEM 3 (CONTENT): deliver a Contractor’s Progress, Status and Management Report for Total Case Incidence Rate/Days Away Restricted Time (TCIR/DART) and tailored Data Item Description (DID) as follows:

Submit TCIR/DART rates or injury and illness rates (for the Standard Industrial Classification Systems (SICS) code or the North American Industrial Classification Systems (NAICS) code) for the applicable industry annually using the Bureau of Labor Statistics (BLS) formula IAW CSP 03-01- 005

If TCIR/DART rates or injury and illnesses rates are not maintained due to OSHA authorized exclusions, submit comparable insurance rates or compensation injury rates.

DID REQUIREMENTS ITEM 2 (FORMAT) - CONTRACTOR FORMAT IS ACCEPTABLE,

PENDING GOVERNMENT APPROVAL.

BLOCK 9: DISTRIBUTION AUTHORIZED TO DOD COMPONENTS ONLY TO PROTECT

INFORMATION IN MANAGEMENT REVIEWS, RECORDS OFCONTRACT

PERFORMANCE EVALUATION, OR OTHER ADVISORY DOCUMENTS EVALUATING

PROGRAMS OF CONTRACTORS. DATE OF DETERMINATION 08 JUNE 2020. OTHER

REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO COMMANDING

OFFICER, FLEET READINESS CENTERS, 47038 MCLEOD RD., BLDG 448, PATUXENT

RIVER, MD 20670.

BLOCK 11: THE EFFECTIVE DATE OF THE BASE CONTRACT.

BLOCK 12: NO LATER THAN THE FINAL WORKING DAY IN THE MONTH OF JANUARY

OF EACH CALENDAR YEAR.

BLOCK 14 – See Clause 5252.247-9505 TECHNICAL DATA ANDINFORMATION (NAVAIR)

TOCOR

TPOC

ATPOC (AS APPLICABLE)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO

NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A007 Software Product Specification (SPS) Scientific and Technical Report (Software Product Specification

(SPS)

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-IPSC-81441A SOW 3.1.3; 3.1.16; 3.5.10 FRC SITE LOCATIONS FRC-E, SE,

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

AS REQ SEE BLK 16

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS IAW SOW sections 3.3.2 through 3.3.7

DID REQUIREMENTS ITEM 3. (FORMAT) – CONTRACTOR FORMAT IS ACCEPTABLE,

PENDING GOVERNMENT APPROVAL.

DID REQUIREMENTS ITEM 4. (CONTENT) – DELIVERY SHALL BE IAW WITH CDRL

PARAGRAPH 4 AND/OR SPECIAL INSTRUCTIONS AS REQUIRED IN INDIVIDUAL TASK

ORDERS.

DELIVERY OF THE DATA.

BLOCKS 12 & 13: SUBMIT AS REQUIRED BY THE GOVERNMENT IN INDIVIDUAL TASK

ORDERS. GOVERNMENT DISPOSITION OF APPROVAL / DISAPPROVAL WILL BE

WITHIN 20 BUSINESS DAYS UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS

DISAPPROVED, THE CONTRACTOR SHALL HAVE 10 BUSINESS DAYS TO RESUBMIT

THE CDRL.

BLOCK 14 – See Clause 5252.247-9505 TECHNICAL DATA ANDINFORMATION (NAVAIR)

TPOC

ATPOC (AS APPLICABLE)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO

NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A008 Maintenance and Operator/Aircrew Training deliverables Maintenance and Operator/Aircrew

Training deliverables

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

SEE BLOCK 16 SOW 3.1.3; 3.4.13.11 FRC SITE LOCATIONS FRC-E, SE,

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

a. ADDRESSEE Draft

BLOCK 4: DID(S) WILL BE IDENTIFIED IN INDIVIDUAL TASK ORDERS FROM EXHIBIT A

“Product Deliverable” list TAILORED CONTENT REQUIREMENTS IAW SOW SECTION

3.4.13.11 (see Block 16. Remarks continuation pages)

DID REQUIREMENTS FORMAT – IAW PRODUCT DELIVERABLE DID IDENTIFIED IN

TASK ORDERS / CONTRACTOR FORMAT IS ACCEPTABLE, PENDING GOVERNMENT

APPROVAL.

DID REQUIREMENTS CONTENT – DELIVERY IAW PRODUCT DELIVERABLE DID

IDENTIFIED IN TASK ORDERS

BLOCK 9: A DISTRIBUTION STATEMENT IS REQUIRED AND THE CONTRACTOR

SHALL OBTAIN FROM THE GOVERNMENT IN INDIVIDUAL TASK ORDERS FOR

DELIVERY OF THE DATA.

BLOCKS 12 & 13: SUBMIT AS REQUIRED BY THE GOVERNMENT. GOVERNMENT

DISPOSITION OF APPROVAL / DISAPPROVAL WILL BE WITHIN 20 BUSINESS DAYS

UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS DISAPPROVED, THE

CONTRACTOR SHALL HAVE 10 BUSINESS DAYS TO RESUBMIT THE CDRL.

TPOC

ATPOC (AS APPLICABLE)

A. CONTRACT LINE ITEM NO

B. EXHIBIT

A

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

LOGEN Support Services

E. CONTRACT/PR NO.

N68520-22-R-0001

F. CONTRACTOR

TBD

1. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued)

BLOCK 4 Product deliverable: IAW SOW requirement section 3.4.13.11: Develop maintenance and operator/aircrew training deliverables using the training products by functional area guide below. CDRL / Product Number shall be identified in individual task orders. Functional Area listed in the table below as follows: 1. Analysis, Design and Evaluation; 2. Development and Production; and 3. Sustainment.

Requirements SOW

Section

Product

Number

Functional

Area Intermediate Products DID Number

3.4.13.11 1 1, 2, 3 Management Plan DI-MGMT-80004A, Management Plan

3.4.13.11 2 1, 2, 3 Integrated Master Schedule (IMS) DI-MGMT-81861, Integrated Master Schedule

3.4.13.11 3 1, 2, 3 Agenda DI-ADMIN-81249C, Meeting Agenda

3.4.13.11 4 1, 2, 3 Minutes DI-ADMIN-81250C, Meeting Minutes

3.4.13.11 5 1, 2, 3 Contractor’s Progress, Status, and

Management Report

DI-MGMT-81928, Contractor’s Progress, Status, and Management Report

3.4.13.11 6 1, 2, 3 System Engineering Management

Plan (SEMP)

DI-SESS-81785, System Engineering

Management Plan (SEMP)

3.4.13.11 7 1, 2, 3 Software Development Plan (SDP) DI-IPSC-81427B, Software Development Plan

3.4.13.11 8 1, 2, 3 Engineering Change Proposals

(ECPs)

DI-CMAN-81589, Engineering Change Proposal

3.4.13.11 9 1, 2, 3 Request for Deviations (RFDs) DI-CMAN-80641B, Request for Deviation

3.4.13.11 10 1 Internal Evaluation Report DI-PSSS-81524D, Training Evaluation Document

3.4.13.11 11 1 External Evaluation Report DI-PSSS-81524D, Training Evaluation Document

3.4.13.11 12 1 Training Effectiveness Evaluation

Report

DI-PSSS-81524D, Training Evaluation Document

3.4.13.11 13 1 Return on Investment Report DI-PSSS-81524D, Training Evaluation Document

3.4.13.11 14 1 Training Systems Use and

Performance Report

DI-PSSS-81524D, Training Evaluation Document

3.4.13.11 15 1 Transfer of Training Report DI-PSSS-81524D, Training Evaluation Document

3.4.13.11 16 1 Analysis of Alternatives Report DI-SESS-81517C, Training Situation

Document

3.4.13.11 17 1 Mission Analysis DI-SESS-81518D, Instructional

Performance Requirements Document

A. CONTRACT LINE ITEM NO.

F. CONTRACTOR

TBD

2. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued)

Requirements SOW

Section

Product

Number

Functional

Area

Intermediate Products DID Number

3.4.13.11 18 1 Training System Strategies DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 19 1 Job or Occupational Analysis DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 20 1 Task Analysis DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 21 1 Cognitive Task Analysis DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 22 1 Critical Task Analysis Report DI-HFAC-81399B, Critical Task Analysis

3.4.13.11 23 1, 3 Problem Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 24 1 Similar Systems Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 25 1, 3 Gap Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 26 1 Top Down/Bottom Up Functional

Analyses

DI-MISC-80711A, Scientific and Technical

Report

3.4.13.11 27 1 Use Case Development DI-SESS-81517C, Training Situation Document

3.4.13.11 28 1, 3 Training Situation Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 29 1, 3 Training Technology Assessment DI-SESS-81517C, Training Situation Document

3.4.13.11 30 1 Needs Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 31 1 Human Performance Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 32 1 Top Down / Bottom Up Analysis DI-HFAC-80745C, Human System Engineering

Report

3.4.13.11 33 1 Critical Task Analysis DI-HFAC-81399B, Critical task Analysis Report

3.4.13.11 34 1, 3 Root Cause Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 35 1 Commonality Analysis DI-SESS-81517C, Training Situation

Document

A. CONTRACT LINE ITEM NO.

F. CONTRACTOR

TBD

3. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued)

Requirements

SOW Section

Product

Number

Functional

Area Intermediate Products DID Number

3.4.13.11 36 1,3 Resource Requirements Analysis DI-SESS-81517C, Training Situation Document

3.4.13.11 37 1 Training Task List DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 38 1, 3 Terminal and Enabling Learning

Objectives Construction

DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 39 1 Objectives Hierarchy DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 40 1, 3 Cross Reference Matrix (Task to LO) DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 41 1 Mission Performance Standards DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 42 1, 3 Implementation Plan DI-MGMT-81737, Implementation Plan

3.4.13.11 43 1, 3 Evaluation Plan DI-SESS-81524B, Training Evaluation Document

3.4.13.11 44 1, 3 Mission Team and Unit Standards DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 45 1, 3 Media Analysis Model DI-SESS-81519C, Instructional Media

Requirements Document

3.4.13.11 46 1, 3 Media Analysis Report DI-SESS-81519C, Instructional Media

Requirements Document

3.4.13.11 47 1, 3 Instructional Delivery System

Functional Data Report

DI-SESS-81519C, Instructional Media

Requirements Document

3.4.13.11 48 1, 2, 3 Cost Analysis Report DI-SESS-81517C, Training Situation Document

3.4.13.11 49 1, 3 Analysis of Alternatives DI-SESS-81517C, Training Situation Document

3.4.13.11 50 1 Training Planning Process

Methodology

DI-SESS-81518D, Instructional Performance

Requirements Document

3.4.13.11 51 1, 2 ADL/SCO Reusability Report DI-SESS-81526C, Instructional Media Package

3.4.13.11 52 1 Training Device Requirements

Document

DI-SESS-81519C, Instructional Media

Requirements Document

3.4.13.11 53 1 Training System Functional

Description

DI-SESS-81519C, Instructional Media

Requirements Document

A. CONTRACT LINE ITEM NO.

F. CONTRACTOR

TBD

4. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued)

Requirements

SOW Section

Product

Number

Functional

Area

Intermediate Products DID Number

3.4.13.11 54 1, 2, 3 Training Systems Facilities Report DI-FACR-80976, Facilities Plan

3.4.13.11 55 1, 3 Training System Design Strategy

Document

DI-PSSS-81520B, Instructional Media Design

Package

3.4.13.11 56 2, 3 Design and Style Guide DI-PSSS-81520B, Instructional Media Design Package

3.4.13.11 57 2, 3 Interface Design Document DI-PSSS-81520B, Instructional Media Design

Package

3.4.13.11 58 1, 2, 3 Lesson Design Specification DI-PSSS-81520B, Instructional Media Design

Package

3.4.13.11 59 1, 2, 3 Instructional Media Resource

Requirements Document

DI-PSSS-81520B, Instructional Media Design

Package

3.4.13.11 60 1, 2, 3 Concurrency Management Plan DI-MISC-80508B, Technical Report-

Study/Services

3.4.13.11 61 1, 2, 3 IT Approval Forms DI-MISC-80508B, Technical Report-

Study/Services

3.4.13.11 62 1, 2, 3 Life Cycle Cost Report DI-FNCL-80448, Life Cycle Cost (LCC) and

Independent Schedule Assessment (ISA) Report

3.4.13.11 63 2, 3 Test Items, Tests and Test Bank (Pre-and Post-Tests)

DI-SESS-81525C, Test Package

3.4.13.11 64 2, 3 Assessment Tests DI-SESS-81525C, Test Package

3.4.13.11 65 2, 3 Diagnostic Tests DI-SESS-81525C, Test Package

3.4.13.11 66 2, 3 Predictive Tests DI-SESS-81525C, Test Package

3.4.13.11 67 2, 3 Lesson Format Guide DI-SESS-81520B, Instructional Media Design Package

3.4.13.11 68 2 Prototype Lesson DI-SESS-81520B, Instructional Media Design Package

3.4.13.11 69 2, 3 Logic Flow Diagrams DI-SESS-81520B, Instructional Media Design Package

3.4.13.11 70 2, 3 Engineering Change Plan DI-SESS-81519C, Instructional Media

A. CONTRACT LINE ITEM NO.

F. CONTRACTOR

TBD

5. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued

Requirements

Sow Section

Product

Number Functional

Area Intermediate Products DID Number

3.4.13.11 71 2, 3 Pre-Planned Product Improvement

Plan

DI-SESS-81519C, Instructional Media

Requirements Document

3.4.13.11 72 2, 3 Master Syllabus/Curriculum Outline DI-PSSS-81527D, Training System Support

Document

3.4.13.11 73 2, 3 Course Logic Flow Diagrams DI-SESS-81520B, Instructional Media Design

Package

3.4.13.11 74 2, 3 Training Orientation Guide DI-SESS-81522D, Course Conduct Information

Package

3.4.13.11 75 1, 2, 3 Course Training Standards

Information Package

DI-SESS-81522D, Course Conduct Information

Package

3.4.13.11 76 2, 3 Lesson Plans DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 77 2, 3 Student Guides DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 78 2, 3 Kneeboards DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 79 2, 3 Briefing Guides DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 80 2, 3 Performance Checklists DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 81 2, 3 Job Aids DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 82 2, 3 Instructor Under Training Materials DI-PSSS-81523D, Training Conduct Support Doc

3.4.13.11 83 2, 3 Course Completion Certificates DI-SESS-81522D, Course Conduct Information

Package

3.4.13.11 84 2, 3 Instructor Course Evaluation Sheets DI-SESS-81522D, Course Conduct Information

Package

3.4.13.11 85 2, 3 Student Course Evaluation Sheets DI-SESS-81522D, Course Conduct Information

Package

3.4.13.11 86 2, 3 Course Completion Report DI-SESS-81522D, Course Conduct

Information Package

3.4.13.11 87 2, 3 Training System Database

Report

DI-IPSC-81437A, Database Design

Description (DBDD)

A. CONTRACT LINE ITEM NO.

F. CONTRACTOR

TBD

6. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued)

Requirements

SOW Section

Product

Number

Functional

3.4.13.11 88 2, 3 Training System Resource

DI-SESS-81522D, Course Conduct Information

Package

3.4.13.11 88 2, 3 OJT Training Materials DI-PSSS-81523D, Training Conduct Support

Document

3.4.13.11 89 2, 3 Training Material Change Package DI-PSSS-81523D, Training Conduct Support

Document

3.4.13.11 90 2, 3 Media Asset Repository DI-SESS-81526C, Instructional Media Package

3.4.13.11 91 2, 3 Instructional Media Package DI-SESS-81526C, Instructional Media Package

3.4.13.11 92 2, 3 Scripts & Storyboards DI-SESS-81526C, Instructional Media Package

3.4.13.11 93 2, 3 On-Screen Lessons DI-SESS-81526C, Instructional Media Package

3.4.13.11 94 2, 3 Graphic Media Development Data

Report

DI-SESS-81526C, Instructional Media Package

3.4.13.11 95 2, 3 Interactive Courseware Directions DI-SESS-81526C, Instructional Media Package

3.4.13.11 96 2, 3 Programming Requirements Data

Package

DI-SESS-81526C, Instructional Media Package

3.4.13.11 97 2, 3 Instructional Media Data Files DI-SESS-81526C, Instructional Media Package

3.4.13.11 98 2, 3 SCORM Conformance

Requirements Data

DI-SESS-81526C, Instructional Media Package

3.4.13.11 99 2, 3 Training System Support Document DI-PSSS-81527D, Training System Support

Document

3.4.13.11 100 2, 3 Training System Operating

Procedures

DI-PSSS-81527D, Training System Support

Document

3.4.13.11 101 2, 3 Concurrency Management Plan DI-MISC-80711A, Scientific and Technical

Report

3.4.13.11 102 2, 3 Software User Manual DI-ISPC-81443A, Software User Manual

3.4.13.11 103 2, 3 Usability Test Plan DI-MISC-80711A, Scientific and Technical

Report

3.4.13.11 104 2, 3 Change Package DI-SESS-81523D, Training Conduct Support

Document

A. CONTRACT LINE ITEM NO.

F. CONTRACTOR

TBD

7. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Maintenance and Operator/Aircrew Training deliverables

3. SUBTITLE

Maintenance and Operator/Aircrew Training deliverables

16. REMARKS (Continued)

Requirements

SOW Section

Product

Number

Functional

3.4.13.11 105 2, 3 Learning Management Systems

Test and Acceptance

DI-QCIC-80553A, Acceptance Test Plan

3.4.13.11 106 1, 2, 3 System/Subsystem Specification

(SSS)

DI-DPSC-81431A, System/Subsystem

Specification (SSS)

3.4.13.11 107 1, 2, 3 Scientific and Technical Reports

(Requirements Traceability and

Verification Matrix (RTVM))

DI-MISC-80711A, Scientific and Technical

Reports

3.4.13.11 108 1, 2, 3 System/Subsystem Design

Description (SSDD)

DI-IPSC-81432A, System/Subsystem Design

Description (SSDD)

3.4.13.11 109 1, 2, 3 Interface Control Document (ICD) DI-SESS-81248B, Interface Control Document

(ICD)

3.4.13.11 110 1, 2, 3 Product Drawings/Models and

Associated Lists

DI-SESS-81000F, Product Drawings/Models and Associated Lists

3.4.13.11 111 1, 2, 3 Software Requirements

Specification

DI-IPSC-81433A, Software Requirements

Specification (SRS)

3.4.13.11 112 1, 2, 3 Software Design Description (SDD) DI-IPSC-81435A, Software Design Description

(SDD)

3.4.13.11 113 1, 2, 3 Scientific and Technical Report

(Software Product Specification)

DI-IPSC-81441A, Software Product

Specification (SPS)

3.4.13.11 114 1, 2, 3 Presentation Material DI-ADMN-81373, Presentation Material

3.4.13.11 115 1, 2, 3 Revision to Existing Documents

(Test and Evaluation Master Plan

(TEMP)

DI-ADMN-80925A, Revision to Existing

Documents

3.4.13.11 116 1, 2, 3 Test Procedures DI-NDTI-80603A, Test Procedures

3.4.13.11 117 1, 2, 3 Trainer Criteria Report (TCR) DI-MISC-81281, Trainer Criteria Report

3.4.13.11 118 1, 2, 3 Test/Inspection Report (TIR) DI-NDTI-80809B, Test/Inspection Report

3.4.13.11 119 1, 2, 3 Personnel Qualification Standard DI-MGMT-81954 Personnel Qualification

Standard (PQS)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO

NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER MISC

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

A009 Technical Report Studies-Study/Services Technical Report Studies

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-MISC-80508B SOW 3.1.2; 3.1.3.5; 3.3.9;

3.3.14; 3.3.15; 3.3.17; 3.3.18.1;

3.4.14.14

FRC SITE LOCATIONS FRC-E, SE,

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS

DID REQUIREMENTS PARAGRAPH 2 (FORMAT) – CONTRACTOR FORMAT IS

ACCEPTABLE, PENDING GOVERNMENT APPROVAL.

DID REQUIREMENTS PARAGRAPH 3 (CONTENT) – DELIVERY SHALL CONSIST OF

VARIOUS TECHNICAL DOCUMENTS, AS REQUIRED, INCLUDING: COURSEWARE

MATERIALS, REPORTS, PLANS, STUDIES AND ANALYSES, INSTRUCTOR TRAINING

MATERIALS, ASSESSMENTS, STRATEGIES, ETC. AS REQUIR ED BY THE TASK

ORDER.

BLOCK 9: A DISTRIBUTION STATEMENT IS REQUIRED AND SHALL BE OBTAINED

BLOCKS 12 & 13: SUBMIT AS REQUIRED BY THE GOVERNMENT. GOVERNMENT

DISPOSITION OF APPROVAL / DISAPPROVAL WILL BE WITHIN 20 BUSINESS DAYS

UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS DISAPPROVED, THE

CONTRACTOR SHALL HAVE 10 BUSINESS DAYS TO RESUBMIT THE CDRL.

TPOC

ATPOC (AS APPLICABLE)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO NOT

RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE GROUP

A010 Electromagnetic Environmental Effects (E3)

Integration and Analysis Report (E31AR) Electromagnetic

Interference/Electrostatic Discharge/

Controls

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-EMCS-81540B SOW 3.1.3; 3.5.12 FRC SITE LOCATIONS FRC-E, SE,

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS

DID REQUIREMENTS ITEM 2 (FORMAT) – CONTRACTOR FORMAT IS ACCEPTABLE,

DID REQUIREMENTS ITEM 3 (CONTENT) –IAW CDRL PARAGRAPHS 3.1 through 3.3

AND/OR ADDITIONAL SPECIFIC REQUIREMENTS OUTLINED IN INDIVIDUAL TASK

ORDERS.

UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS DISAPPROVED, THE CONTRACTOR

SHALL HAVE 10 BUSINESS DAYS TO RESUBMIT THE CDRL.

TOCOR

TPOC

ATPOC (AS APPLICABLE)

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to

Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0014 A TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

LOGEN Support Services N68520-22-R-0001 TBD

A011

Failure Summary & Analysis Report

Failure Summary & Analysis Report

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

DI-SESS-80255B SOW 3.1.3; 3.5.13.1 FRCSITE LOCATIONS FRC-E,

SE, AND SW

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

a. ADDRESSEE Draft

BLOCK 4: TAILORED CONTENT REQUIREMENTS

IAW SOW section 3.5.13.1 The Contractor shall present a summary of the R&M data collected under FRACAS at the scheduled program reviews as required and specified in the individual Task Orders.

DID REQUIREMENTS ITEM 2 (FORMAT) – CONTRACTOR FORMAT IS ACCEPTABLE,

DID REQUIREMENTS ITEM 3 (CONTENT) – SUMMARIZE THE RESULTS OF THE

CONTRACTOR’S FAILURE REPORTING, ANALYSIS, AND CORRECTIVE ACTION

SYSTEM (FRACAS) IMPLEMENTATION REQUIRED BY THE STATEMENT OF WORK,

AND SHALL INCLUDE A CUMULATIVE TABULATION OF FAILURE DATA.

UNLESS OTHERWISE SPECIFIED. IF THE CDRL IS DISAPPROVED, THE

CONTRACTOR SHALL HAVE BUSINESS DAYS TO RESUBMIT THE CDRL.

TOCOR

TPOC

ATPOC (AS APPLICABLE)