ATTACHMENT E - MAST SPECS
76 KB Posted
- Attached to
- Mobile Command Vehicle for Campus Police
- Solicitation number
- RFP24-01
- Issued by
- Chatham County, Georgia
About this file
This is Attachment E—Mast Specifications for RFP 24-01, a Mobile Command Vehicle solicitation issued by the Savannah-Chatham County Board of Public Education (SCCPSS) in Georgia. The specification outlines mast and mast-mounted equipment requirements for a single mobile command vehicle intended for Campus Police operations. Key components include a heavy-duty non-locking telescoping pneumatic mast with a maximum 265-pound top load capacity, 26 feet 2 inches extended height, and 6 feet 1 inch nested height; a ½ horsepower compressor with 2-gallon air tank; a custom fabricated 0.125-inch aluminum mast mounting plate with thermoplastic tubing containing two CAT6 cables, two LMR 240 cables, and 12-volt power for a mast lookup light; a mast lookup light; a weatherproof exterior mast control switch; an AXIS Q6155-E PTZ dome network camera with HDTV 1080p and 30x optical zoom; an AXIS T8705 video decoder with HDMI output supporting multiview capability for up to 16 cameras; and an SD memory card for IP camera recording with download and viewing capability via IP address. Addendum #2 to RFP 24-01 extended the closing date to July 20, 2023 at 11:00 AM Eastern Time, with Addendum #1 previously posted. The full solicitation is available on the District's website at www.sccpss.com.
The file does not contain information regarding pricing terms, set-asides, incumbents, funding sources, or other financial requirements. These details would be found in other sections of the RFP 24-01 solicitation documents.
Text of this file
RFP 24-01 MOBILE COMMAND VEHICLE
ATTACHMENT E
Item # Qty Description
1.01 1
MAST AND MAST MOUNTED EQUIPMENT:
Heavy-duty non-locking telescoping pneumatic mast.
• 265 lb max top load capacity
• 26’ 2” extended height
• 6’ 1” nested height
• Breakaway nylon key to prevent tower rotation
• Air safety valve for over pressure release and condensation drainage
• Water drainage holes
• Interlock to prevent vehicle from being driven while mast is raised
• Tower should not require routine lubrication
• Mast cap cover to cover all tower sections when the tower is in the retracted position
1.02 1 ½ hp compressor with 2 gallon air tank
1.03 1
Custom fabricated 0.125” aluminum mast mounting plate for camera to include:
• ¾” thermoplastic tubing with weather-tight fittings
• Electrical connection box
• Painted to match vehicle color
Thermoplastic tubing to contain:
• Two (2) CAT6 cables. (1 for mast camera and 1 spare)
• Two (2) LMR 240 cables with slack in top cover (SCCPSS to terminate the cables)
• One (1) 12v power for mast look up light
1.04 1 Custom fabricated 0.125” aluminum thermoplastic tubing cylinder painted to match body color.
1.05 1 Mast lookup light mounted to mast
1.06 1 Weatherproof mast up/down control switch on exterior of vehicle.
1.07 1
AXIS Q6155-E PTZ Dome Network Camera with lightfinder and speed dry technology
• HDTV 1080p and 30x optical zoom
• Built in laser for focusing in low light and complete darkness
1.08 1
AXIS T8705 Video Decoder
• HDTV 1080p HDMI video decoder
• Sequence and Multiview (up to 16 cameras)
1.09 1 SD Memory Card for IP camera.
Shall record mast camera and allow download and view via an IP address.
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it. Updated .