Attachment E - DLA Energy Provision Clauses.pdf

Attachment E - DLA Energy Provision & Clauses

SPE605-23-R-0213

B1.05-2 SUPPLIES TO BE FURNISHED (OVERSEAS PC&S) (DLA INTERNET BID BOARD SYSTEM (DIBBS))

APPLICATION) (DLA ENERGY AUG 2023)(TAILORED)

(a) The supplies to be furnished during the period specified in the REQUIREMENTS clause, the delivery points, methods of delivery, and estimated quantities are shown below. The quantities shown are best estimates of required quantities only. Unless otherwise specified, the total quantity ordered and required to be delivered may be greater than or less than such quantities. The Government agrees to order from the Contractor and the Contractor shall, if ordered, deliver during the contract period all items awarded under this contract. The prices paid shall be the unit prices specified in subsequent price change modifications issued in accordance with the ECONOMIC PRICE ADJUSTMENT contract text.

(b) In an emergency, oral orders may be issued but must be confirmed in writing via Enterprise External Business Portal (EEBP) generated order within 48 hours or two business day. See the DLA INTERNET BID BOARD SYSTEM (DIBBS) INTERNET APPLICATION contract text.

(c) Offers shall not be submitted for quantities less than the estimated quantities specified below for each line item.

Offers submitted for less than the estimated quantities will not be considered for award, except for items specifically designated as __3_-year requirements.

SUPPLIES, DELIVERY POINTS, ESTIMATED UNIT

ITEMS AND METHOD OF DELIVERY QUANTITY PRICE (USD)

0001 Jet Fuel Aviation (JA1) NSN: 9130-00-753-5026 311,000 USG (Capt. Luis Fernando Gomez N, Colombia)

0002 Diesel Fuel (DF2) NSN: 9140-00-286-5294 458,000 USG (La Macarena, Colombia)

0003 Diesel Fuel (DF2) NSN: 9140-00-286-5294 1,000 USG (Capt. Luis Fernando Gomez N, Colombia)

0004 Jet Fuel Aviation (JA1) NSN: 9130-00-753-5026 222,000 USG (Capt. Luis Fernando Gomez N, Colombia)

0005 Diesel Fuel (DF2) NSN: 9140-00-286-5294 225,000 USG (Hermosillo, Mexico)

B19.02 ECONOMIC PRICE ADJUSTMENT (OVERSEAS) (DLA ENERGY JAN 2012)

(a) WARRANTIES. The Contractor warrants that--

(1) The unit prices set forth in the Schedule do not include allowances for any portion of the contingency covered by this contract text; and

(2) The prices to be invoiced hereunder shall be computed in accordance with the texts of this contract.

(b) DEFINITIONS. As used throughout this contract text, the term--

(1) Award price means the unit price offered by the Contractor and set forth opposite the item in the Schedule.

(2) Reference price means the market price, this is either published in an independent publication or supplied by the Contractor, with which the award price is to fluctuate. The reference price should be a market price for the same or similar product(s) as the item being purchased.

(3) Date of delivery means--

(i) FOR TANKER OR BARGE DELIVERIES.

(A) F.O.B. ORIGIN. The date and time vessel commences loading;

(B) F.O.B. DESTINATION. The date and time vessel commences discharging;

(ii) FOR PIPELINE DELIVERIES. The date and time product commences to move past the specified f.o.b. point; and

(iii) FOR ALL OTHER TYPES OF DELIVERIES. The date product is received.

(c) ADJUSTMENTS. The prices payable under this contract shall be the award price increased or decreased by the amount, determined according to the following formula, that the reference price shall have increased or decreased, to and including the date of delivery.

(1) The amount of increase or decrease in the award price shall be based on the same number of cents, or fraction thereof, that the reference price increases or decreases per like unit of measure.

(2) The reference price with which the award price for the listed item is to fluctuate (and which is more fully defined in the Table below) is—

[ ] (i) The low price published in _________________________________________________________.

(name of publication)

[ ] (ii) The average of the prices published in ________________________________________________.

(name of publication)

[ X ] (iii) The established price posted by _Ecopetrol / Platts OPR No. 2 US Gulf Waterborne __ and (name of company) published in __Supplier Notice_/ Platts Oilgram________________________________________________ (name of publication)

(3) COMMERCIAL. For price adjustments utilizing commercial publications such as Platts Oilgram, etc., the reference price in effect on the date of delivery shall be that item’s reference price that is in effect for the dates in the Table below. If an effective date is not cited in a publication, then the date of publication shall apply. An increase or decrease in any reference price published in a trade price service or in a commercial journal shall apply only to deliveries made on or after the effective date of such trade price service or commercial journal. In the event of a holiday for which an effective date is not used, the latest effective price(s) prior to the effective date shall be used. NOTE: Platts issues corrections to its published prices on a regular basis. Platts posts corrections to its website (www.platts.com) for its subscribers. If a correction to a reference price is found on the Platts website, all of the items that use that reference price will be corrected. DLA Energy will correct any other reference prices, as notice of the correction is received. DLA Energy will work with the pricing services to determine the appropriate price, whenever an offeror or contractor can show that the price referenced should be reviewed.

(4) NONCOMMERCIAL (NOTIFICATION). For price adjustments utilizing a reference price indicator other than commercial publications such as Platts Oilgram, the Contractor shall notify the Contracting Officer of any changes in the reference price in writing within 15 calendar days from the date thereof.

(i) INCREASES. Any increase in unit price as a result of an increase in reference price shall apply only to deliveries made on or after the date of receipt by the Contracting Officer of a written notification from the Contractor of such increase. However, the prices payable under this contract shall in no event exceed the Contractor’s posted or established selling price in effect on the date of delivery for the product supplied in the form of delivery made at the point of delivery. Also, no notification incorporating an increase in a contract unit price shall be executed pursuant to this contract text until the increase has been verified by the Contracting Officer.

(ii) DECREASES. If the Contractor fails to notify the Contracting Officer of any decrease in the reference price, within the allotted 15 day period, such decrease shall apply to all deliveries made on or after the effective date of such decrease. However, if any overpayment is made to the Contractor as a result of the Contractor’s failure to give timely notice to the Contracting Officer of any decrease in the established price, the Contractor shall be charged interest on such overpayment from the date of the overpayment to the date of reimbursement by the Contractor for the overpayment in accordance with the Disputes paragraph of the CONTRACT TERMS AND CONDITIONS – COMMERICAL ITEMS clause of this contract.

(5) Where the reference price is the Contractor’s established price (see (c)(2)(iii) above), the Contractor warrants that the product selected is one for which, except for modification required by the specifications of this contract, the Contractor has an established price. Such price is the net price after applying any applicable standard trade discounts offered by the Contractor for its catalog, list, or schedule price. The Contractor further warrants that, as of the current date, any differences between the unit prices of the line items identified in the Schedule and the Contractor's established price for like quantities of the nearest commercial equivalents of such contract items are due to compliance with contract specifications and to compliance with any requirements that this contract may contain for preservation, packaging, and packing beyond standard commercial practice.

http://www.platts.com/

(d) MODIFICATIONS. Any resultant price changes shall be provided via notification through contract modifications and/or postings to the DLA Energy web page at http://www.desc.dla.mil under the heading Vendor Resources and then Product Price Adjustments.

(e) FAILURE TO DELIVER. Notwithstanding any other conditions of this contract text, no upward adjustment shall apply to product scheduled under the contract to be delivered before the effective date of the adjustment, unless the Contractor’s failure to deliver according to the delivery schedule results from causes beyond the Contractor’s control and without its fault or negligence, within the meaning of the Excusable Delays and Termination for Cause paragraphs of the CONTRACT TERMS AND CONDITONS – COMMERCIAL ITEMS clause of the this contract in which case the contract shall be amended to make an equitable extension of the delivery schedule.

(f) UPWARD CEILING ON ECONOMIC PRICE ADJUSTMENT. The Contractor agrees that the total increase in any contract unit price pursuant to these economic price adjustment contract texts shall not exceed ______ percent of the award price, except as provided hereafter:

(1) If at any time the Contractor has reason to believe that within the near future a price adjustment under the conditions of this contract text will be required that will exceed the current contract ceiling price for any item, the Contractor shall promptly notify the Contracting Officer in writing of the expected increase. The notification shall include a revised ceiling the Contractor believes is sufficient to permit completion of remaining contract performance, along with appropriate explanation and documentation as required by the Contracting Officer.

(2) If an actual increase in the reference price would raise a contract unit price for an item above the current ceiling, the Contractor shall have no obligation under this contract to fill pending or future orders for such item, as of the effective date of the increase, unless the Contracting Officer issues a contract modification to raise the ceiling. If the contract ceiling will not be raised, the Contracting Officer shall so promptly notify the Contractor in writing.

(g) REVISION OF REFERENCE PRICE INDICATOR. In the event—

(1) Any applicable reference price is discontinued or its method of derivation is altered substantially;

(2) The reference price is an average of published or posted prices, and any one price ceases to be published or posted;

(3) The reference price is published in a trade price service or commercial journal and such publication ceases to publish said reference price or changes its method of quoting prices; or

(4) The Contracting Officer determines that the reference price consistently and substantially failed to reflect market conditions— the parties shall mutually agree upon an appropriate and comparable substitute for determining the price adjustment described hereunder. The contract shall be modified to reflect such substitute effective on the date the indicator was discontinued, altered, or began to consistently and substantially fail to reflect market conditions. If the parties fail to agree on an appropriate substitute, the matter shall be resolved in accordance with the Disputes paragraph of the CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS clause of this contract.

(h) CONVERSION FACTORS. If this contract text requires quantity conversion for economic price adjustment purposes, the conversion factors for applicable products, as specified in the CONVERSION FACTORS contract text, apply unless otherwise specified in the Schedule.

(i) EXAMINATION OF RECORDS. The Contractor agrees that the Contracting Officer or designated representatives shall have the right to examine the Contractor’s books, records, documents, or other data the Contracting Officer deems necessary to verify Contractor adherence to the wording of this contract text.

(j) FINAL INVOICE. The Contractor shall include a statement on the final invoice that the amounts invoiced hereunder have applied all decreases required by this contract text.

(k) TABLE.

Line Item National Stock Number

Product Description

Quantity

(USG)

Publication Base Reference

Date

Base Reference Price (USD)

0001 9130-007535026 JA1 311,000 SUPPLIER NOTICE (Ecopetrol) July 24, 2023 $2.7947

0002 9140-002865294 DF2 458,000 SUPPLIER NOTICE (Ecopetrol) July 24, 2023 $2.1828 0003 9140-002865294 DF2 1,000 SUPPLIER NOTICE (Ecopetrol) July 24, 2023 $2.1828 0004 9130-007535026 JA1 222,000 SUPPLIER NOTICE (Ecopetrol) July 24, 2023 $2.7947 0005 9140-002865294 DF2 225,000 Platts OPR No. 2 US Gulf

Waterborne July 24, 2023 $2.4540 http://www.desc.dla.mil/

SECTION F: DELIVERIES OR PERFORMANCE

FAR 52.211-16 VARIATION IN QUANTITY (APR 1984)

(a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) of this clause.

(b) The permissible variation shall be limited to:

____10%_____ Percent increase

____10%_____ Percent decrease This increase or decrease shall apply to ALL LINE ITEMS.

FAR 52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

The Contractor is responsible for the delivery of each item quantity within allowable variations, if any. If the Contractor delivers and the Government receives quantities of any item in excess of the quantity called for (after considering any allowable variation in quantity), such excess quantities will be treated as being delivered for the convenience of the Contractor. The Government may retain such excess quantities up to $250 in value without compensating the Contractor therefor, and the Contractor waives all right, title, or interests therein. Quantities in excess of $250 will, at the option of the Government, either be returned at the Contractor’s expense or retained and paid for by the Government at the contract unit price.

F1.01-1 DELIVERY CONDITIONS FOR TRANSPORT TRUCKS, TRUCKS AND TRAILERS, AND TANK

WAGONS (DLA ENERGY MARCH 2022)

IMPORTANT NOTE on EPA TESTING OF UNDERGROUND TANKS. If the "volumetric" method is used for annual EPA testing of underground tanks, the "topping off" of tanks for this test is outside the scope of DLA Energy requirements contracts.

(a) F.O.B. ORIGIN. On items calling for delivery at Contractor's refinery, terminal, or bulk plant f.o.b. transport truck, truck and trailer, or tank wagon—

(1) Supplies ordered hereunder shall be delivered, at Contractor's expense, into equipment specified in the Schedule.

(2) Unless otherwise specified in the Schedule, all deliveries shall be made on the day specified in the delivery order unless otherwise authorized by the receiving activity during normal working hours of such activity, provided that the Contractor shall have received the order at least 48 hours prior to the day so specified.

(b) F.O.B. DESTINATION. On items calling for delivery f.o.b. destination by means of transport truck, truck and trailer, or tank wagon--

(1) Where the Schedule provides for multiple drop deliveries, the Contractor may be required to deliver into more than one storage tank. Where truck and trailer is the method of delivery specified, the Contractor may, at its option, make delivery by transport truck. In the case of deliveries in Alaska, where truck and trailer or transport truck is the method of delivery specified, the Contractor may, at its option, make delivery by tank wagon.

(2) Unless otherwise specified in the Schedule, all deliveries shall be made on the day specified in the delivery order unless otherwise authorized by the receiving activity during normal working hours of such activity, provided that the Contractor shall have received the order at least 48 hours prior to the day so specified.

(3) When delivery is made by tank wagon, such wagon shall be equipped with pump, meter, and a minimum of 100 feet (30 meters) of hose. Where delivery is made by transport truck or truck and trailer, such delivery equipment shall be equipped with a minimum of 15 feet of hose.

(4) When delivery is made by tank wagon, transport truck, or truck and trailer to a Government facility, the Contractor shall present delivery equipment and product in such condition at destination so as to permit complete off-loading within the prescribed free time.

(5) Unless otherwise provided in the Schedule, free time for unloading trucks, transport trucks, or trucks and trailers shall be unlimited.

(6) When delivery is made by tank wagon, transport truck, or truck and trailer to a Government facility—

(i) The Contractor shall provide properly maintained delivery equipment and properly trained delivery personnel to reasonably assure that delivery can be made without damage to vegetation and asphalt pavement adjacent to storage facilities being filled. The Contractor’s delivery personnel who have not exercised reasonable care and delivery equipment that is poorly maintained may be refused entrance to the installation by the installation Commander.

(ii) The Contractor shall present delivery equipment and product in such condition at destination so as to permit complete off-loading within the prescribed free time.

F1.09-2 DETERMINATION OF INVOICE QUANTITY (PC&S) (DLA ENERGY JAN 2012)

(a) QUANTITY. The quantity of supplies furnished under this contract shall be determined as follows:

(1) F.O.B. DESTINATION.

(i) DELIVERIES BY TANKER OR BARGE.

(A) On items requiring delivery on an f.o.b. destination basis by tanker or barge, the quantity shall be determined on the basis of--

(1) Calibrated meters on the receiving tank system; or

(2) Receiving tank measurements.

(B) All quantities shall be converted to net gallons at 60 degrees Fahrenheit (or liters at 15 degrees Celsius).

(ii) DELIVERIES BY RAIL TANK CAR.

(A) On items requiring delivery on an f.o.b. destination basis by rail tank car, the quantity of supplies furnished under this contract shall be determined (at the Government’s option) on the basis of--

(1) Calibrated meter on the receiving tank system;

(2) Weigh, using calibrated scales at the receiving location; or

(3) Receiving tank measurements.

(B) All quantities shall be converted to net gallons at 60 degrees Fahrenheit (or liters at 15 degrees Celsius).

(iii) DELIVERIES BY TANK TRUCK/TRUCK AND TRAILER/TANK WAGON.

(A) If the narrative requires a tank wagon (which is always equipped with a meter), that meter shall be used to determine quantity at time of delivery. The quantity shall be read directly from the meter. On items requiring delivery on a f.o.b.

destination basis by tank truck or truck and trailer, quantity shall be determined in the following order of preference:

(1) Calibrated meter on the receiving tank system

(2) Calibrated meter on the conveyance

(3) Weight using calibrated scales at the receiving location.

(4) Loading rack meter ticket. The ticket must be generated at the time of loading and be based on a calibrated loading rack meter. The loading rack ticket shall be mechanically annotated with the gross and net gallons (or gross and net liters), the observed and corrected API gravity (or density), and the temperature at which the product was measured.

(5) Receipt tank measurements (as identified in the Schedule).

(B) All quantities, other than delivery by tank wagon, shall be converted, either mechanically or manually, to net gallons at 60 degrees Fahrenheit (or liters at 15 degrees Celsius).

(C) If a loading rack meter ticket is used to determine quantity for a biodiesel blend, the quantity shall be converted to net (volume corrected) gallons at 60 degrees Fahrenheit (or liters at 15 degrees Celsius). The Contractor shall prepare separate loading rack meter tickets for the diesel portion and for the biodiesel blend stock B100 (the industry designation for pure biodiesel), hereinafter referred to as the B100 portion of the load. The B100 loading rack meter shall be recorded at gross (ambient) temperature when the loading meter is not capable of providing a net (volume corrected) quantity. The total shall be the sum of the net diesel and gross B100. When the B100 loading rack meters are capable of providing a net (volume corrected) quantity, the total receipt quantity shall be the sum of the net diesel and the net B100.

(2) F.O.B. ORIGIN. All quantities shall be converted to net gallons at 60 degrees Fahrenheit (or liters at 15 degrees Celsius).

(i) DELIVERIES INTO TANKER OR BARGE. On items requiring delivery at the Contractor's refinery, terminal, or bulk plant on an f.o.b. origin basis into a tanker or barge, the quantity shall be determined (at the Contractor's option) on the basis of--

(A) Calibrated meter; or

(B) Shipping/shore tank measurement.

(ii) DELIVERIES INTO RAIL TANK CAR. On items requiring delivery at the Contractor’s refinery, terminal, or bulk plant on an f.o.b. origin basis, the quantity shall be determined (at the Contractor’s option) on the basis of--

(A) Certified loading rack meter;

(B) Weight, using calibrated scales; or

(C) Certified capacity tables for the rail tank car.

(iii) DELIVERIES BY TANK TRUCK/TRUCK AND TRAILER/TANK WAGON.

(A) On items requiring delivery at the Contractor's refinery, terminal, or bulk plant on an f.o.b. origin basis, the quantity shall be determined (at the Contractor's option) on the basis of--

(1) Calibrated loading rack meter;

(2) Weight, using calibrated scales; or

(3) Certified capacity tables of the conveyance loaded.

(B) WATER BOTTOMS.

(1) Every delivery must be free of all water bottoms prior to discharge; and

(2) The Contractor is responsible for their removal and disposal.

(b) MEASUREMENT RESTRICTIONS. All methods of measurements described in this contract text are subject to government safety and environmental restrictions, foreign or domestic. Such restrictions may prohibit, or render ineffective, a particular method in some cases.

(c) MEASUREMENT STANDARDS. All measurements and calibrations made to determine quantity shall be in accordance with the most recent edition of the API Manual of Petroleum Measurement Standards (MPMS). Outside the United States, other technically equivalent national or international standards may be used. Certified capacity tables shall mean capacity tables prepared by an independent inspector or any independent surveyor to the aforementioned measurement and calibration standards.

In addition, the following specific standards will be used as applicable:

(1) API MPMS Chapter 11.1, Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils (this chapter is an adjunct to ASTM D 1250, IP 200 and ISO 91-1). Either the 2004 or 1980 version of the standard may be used. Either the printed tables (an adjunct to the 1980 version) or the computer subroutine version of the standard may be used. In case of disputes, the computer subroutine and the 2004 version of the standard will be the referee method.

(i) For crude oils, JP4, and Jet B, use Volume I, Tables 5A and 6A; Volume VII, Tables 53A and 54A; or Volume IV, Tables 23A and 24A.

(ii) For lubricating oils, use Volume XIII, Tables 5D and 6D; Volume XIV, Tables 53D and 54D; or Tables 23D and 24D (2004 version).

(iii) For all other fuels and fuel oils, use Volume II, Tables 5B and 6B; Volume VII, Tables 53B and 54B; or Volume V, Tables 23B and 24B.

(iv) For chemicals/additives, use Volume III, Table 6C (or Volume IX, Table 54C) or volume correct in accordance with the product specification.

(v) Volume XII, Table 52, shall be used to convert cubic meters at 15 degrees Celsius to barrels at 60 degrees Fahrenheit. Convert liters at 15 degrees Celsius to cubic meters at 15 degrees Celsius by dividing by 1,000. Convert gallons at 60 degrees Fahrenheit to barrels at 60 degrees Fahrenheit by dividing by 42. Should foreign law restrict conversion by this method, the method required by law shall be used.

(vi) As an option to (c)(1)(v), liters may be converted to gallons using Table F1.09A (see below). If this option is used, it must be agreed upon by both parties and shall remain in effect for the duration of the contract. Should foreign law restrict conversion by this method, the method required by law shall be stated in the offer.

(vii) If the original measurement is by weight and quantity is required by U.S. gallons, then--

(A) Volume XI, Table 8, shall be used to convert pounds to U.S. gallons at 60 degrees Fahrenheit.

(B) Volume XII of the adjunct to ASTM D 1250, Table 58, shall be used to convert metric tons to U.S. gallons at 60 degrees Fahrenheit.

(2) API MPMS Chapter 4, Proving Systems. All meters used in determining product volume shall be calibrated using this standard with the frequency required by local regulation (foreign or domestic). If no local regulation exists, then the frequency of calibration shall be that recommended by the meter manufacturer or every 6 months, whichever is more frequent. A meter calibration log/calibration certificates shall be maintained which, as a minimum, contains--

(i) Number/name of each meter;

(ii) Calibration frequency;

(iii) Date of the last calibration;

(iv) Due date for next calibration;

(v) Name and signature of the person performing the calibration;

(vi) Traceability to master meter/prover used for calibration; and

(vii) Calibration report number.

Each meter shall be marked with the date of the last calibration and due date for the next calibration. All calibration meter recordings and logs/certificates shall be kept on file and made available upon request. All calibration records (including logs or certificates) shall be retained on file for a period of three years.

(3) API MPMS Chapter 12, Calculation of Petroleum Quantities. All calculations of net quantities shall be made in accordance with this chapter. Outside the U.S., use of tank shell correction factor is not required unless its use is a customary practice for custody transfer.

TABLE F1.09-2A

CONVERSION FACTOR TABLE

Density @ 15°C

Gallons @ 60°F to Liters @ 15°C, Multiply by

Liters @ 15°C to Gallons @ 60°F, Multiply by

0.723 – 0.768 3.78286

0.264350

0.769 – 0.779

3.78309

0.264334

0.780 – 0.798

3.78334

0.264317

0.799 – 0.859

3.78356

0.264301

0.860 – 0.964

3.78381

0.264284

0.965 – 1.074

3.78405

0.264267

(d) SHIPPING DOCUMENTATION. The following information shall be mechanically annotated on the contractor’s shipping document (such as a truck’s metered ticket) when the document is used to determine quantity under this contract: gross and net quantity (gallons or liters, as required), observed and corrected API gravity/density, and the temperature (Fahrenheit or Celsius) at which the product was measured.. The following exceptions apply:

(1) Where government documents are the sole basis for payment, such as DD Form 250/250-1s, the information is not required.

(2) Where conveyances with temperature-compensating meters are used, the shipping document shall only be annotated with the corrected API gravity/density, the net quantity, and a statement that a temperature-compensating meter was used to determine net quantity.

(3) Where volume correction for temperature is not required in accordance with Paragraph (a)(1)(iii)(B) above, the shipping document shall be only be annotated with the API gravity (or density), gross quantity, and a statement that volume correction was not required.

(e) RIGHT TO REPRESENTATIVE. For f.o.b. origin deliveries, the Government has the right to have a representative present to witness the measurement of quantity. For f.o.b. destination deliveries, the Contractor has the right to have a representative present to witness the delivery and measurement of quantity.

(f) DISCREPANCIES. For f.o.b. destination deliveries utilizing volume corrected loading rack meter tickets to determine quantity:

(1) The quantities shown on the shipping document (volume corrected loading rack meter tickets) will be accepted as the quantity received, provided that any differences between that quantity and the Government’s receipt tank measurement at destination does not exceed one half of one percent (0.5%) of the amount on the shipping document. If the difference is greater than one half of one percent (0.5%), the quantity determined by the Government using receipt tank measurements at destination will be used for acceptance and payment provided receipt tank measurements are identified in the Schedule as an approved quantity determination method for that line item. Quantity measurements using the methods specified in section (a)(1)(iii)(A) (1-3) above will be used for acceptance and payment regardless of any discrepancy with a loading rack meter ticket.

(2) If, the Government’s receipt tank quantity measurement varies by more than one half of one percent (0.5%) from the Contractor’s quantity measurement, the parties may conduct a joint investigation) of the variation in order to identify the cause of the discrepancy. Any quantity discrepancy that cannot be settled by the parties and results in a dispute shall be resolved under the Disputes provisions of the contract.

F1.11 DLA INTERNET BID BOARD SYSTEM (DIBBS) (DLA ENERGY) (APR 2014)

(a) Contractor Registration. Contractors must register in DIBBS to obtain a login account at https://www.dibbs.bsm.dla.mil. The login account will allow a contractor to register a primary and alternate email address for notifications. Contractors are strongly encouraged to establish a group email address for the primary email address for the contractor’s authorized point of contacts. The registered email addresses will be the only email used by the government to make notifications.

(b) All contractors must have an active System for Award Management (SAM) account, http://www.sam.gov in order to register for DIBBS.

(c) The Contractor shall use DIBBS to receive orders. DLA Energy will not be using DIBBS receipt of quotes capability. All quotations, proposals, bids shall be submitted in accordance with the terms and conditions of the solicitation.

(d) Preparation and Transmission of Orders

(1) The Government may issue an order for a specific delivery or a series of deliveries (e.g., several deliveries during a week). The Government may also elect to issue an order covering a longer period (including monthly orders) and make periodic calls against these orders designating specific delivery dates, times, and quantities.

(2) Only a DLA Energy warranted Contracting Officer can issue an order, either orally or in writing, against a contract. An oral order issued by the warranted Contracting Officer shall provide the required advance notice to the Contractor and the following information: Interim order number; contract number; item number; ceiling price; quantity; delivery location;

and the required delivery and/ or service date.

(i) For all product orders, the Contractor will receive an electronically signed written order via DIBBS, within 24 hours or one business day after the warranted Contracting Officer issues an oral order.

(ii) For all service orders, the Contractor will receive an electronically signed written order via DIBBS, within five business days after issuing the oral order.

(iii) Interim order number is subject to change once the electronically signed written order is received by the contractor. The order number on the written order will take precedence over the interim order number, if different.

(iv) Regardless of the unit price cited on the written order, the office designated to make payments on the written order will pay the applicable unit price in effect under the terms and conditions of the contract.

(v) Once the order has been issued, an email will be sent to the Contractor to provide notice that the order is available on the contract-specific web page. The order will also be submitted to the payment office.

(3) Calls against previously issued orders must be confirmed in writing within 24 hours or one business day via email message. The email confirmation will reference the previously issued order number and item number and designate specific delivery location, dates, and quantity to be delivered against that order.

(4) The Contractor’s nonreceipt of a written or electronic confirmation of an oral order or oral call against a written or electronic order does not relieve the Contractor from its obligation to perform in accordance with the oral order or oral call against a written or electronic order. The Contractor should contact the DLA Energy Contracting Officer if problems are experienced with receipt of the electronic or written confirmation.

https://www.dibbs.bsm.dla.mil/ http://www.sam.gov/

F3 TRANSPORT TRUCK AND/OR TRUCK AND TRAILER FREE TIME AND DETENTION RATES (PC&S)

(DLA ENERGY AUG 2005)

(a) Upon arrival of Contractor's transport truck or truck and trailer, the receiving activity shall promptly designate the tanks into which the load is to be discharged. Free time will commence when the discharge hose is connected to the receiving line at the delivery point and will end when discharge is completed. The Contractor shall be paid for detention beyond free time for delays caused by the Government. A minimum of one hour free time is required.

(1) Free time for unloading a transport truck or truck and trailer (includes one hour minimum plus any additional time): _______________________________________________.

(2) Rate for detention beyond free time:

The above will not be considered in the evaluation of offers for award except that a free time of less than one hour may render an offer unacceptable. Notwithstanding the above, the Government is entitled to at least as much free time as is allowed by the common carrier or that the Contractor normally allows its regular commercial customers, whichever is greater.

Free time only applies to single-drop deliveries (it is not applicable to multiple-drop tank truck/truck and trailer deliveries or any tank wagon deliveries).

(b) Notwithstanding the above, the Government will not pay more in detention rates than the actual rate charged by the common carrier or the rate the Contractor normally charges its regular commercial customers, whichever is lower.

Detention costs will be the sole responsibility of the activity incurring them and are only allowable on single drop deliveries (they are not allowable on multiple drop tank truck/truck and trailer deliveries or any tank wagon deliveries. Invoices for detention costs will be submitted by the Contractor directly to the activity receiving the product. These provisions are applicable to DLA-owned/capitalized as well as non-DLA-owned/noncapitalized products.

(c) UNLESS THE OFFEROR OTHERWISE INDICATES IN PARAGRAPHS (a)(1) AND (a)(2) ABOVE, FREE

TIME WILL BE CONSIDERED UNLIMITED AND DETENTION COSTS WILL NOT BE CHARGEABLE.

F3.03 NOTIFICATION OF CHANGE IN TRANSPORTATION COMPANY (PC&S) (DLA ENERGY APR 2005)

(a) In the performance of this contract, the Contractor agrees not to utilize transportation companies that have been debarred or suspended, are ineligible for receipt of contracts with Government agencies, are in receipt of a notice of proposed debarment or ineligibility from any Government agency, or are otherwise ineligible under Federal programs. Substitution of a new transportation company is subject to review by the Contracting Officer for use under this contract.

(b) If the Contractor changes transporters after award, the Contractor shall provide the Contracting Officer with the following information on alternative or new transportation company(ies) being utilized in the transportation of supplies under this contract.

Name, Address, and Phone Number State(s) in which transporter of Transportation Company is authorized to operate

F-4 DELIVERY AND ORDERING PERIODS (DLA E NERGY JUN 2002)

(a) The period of this contract during which the Ordering Officer may order and the Contractor shall deliver, if ordered, will be as follows unless the Schedule specifies otherwise:

(1) Ordering period begins: DATE OF AWARD and ends: 30 September 2026.

(2) Delivery period begins: 1 December 2023 and ends: 30 days after end of ordering period.

(b) Notwithstanding the foregoing, deliveries prior to the delivery period, made at the option of the Contractor and pursuant to an order by the Government, shall be deemed to have been made under this contract at the applicable contract price(s).

F51 SHIPMENT AND ROUTING (OVERSEAS) (DLA ENERGY JUNE 2022)

(a) The Contractor shall make shipments of the supplies ordered hereunder by the method specified in the Schedule, to the delivery point, in the quantity, and according to the delivery date specified in the order or in the Schedule.

(b) On items calling for delivery at Contractor's refinery, terminal, or bulk plant on an f.o.b. origin basis, transportation equipment will be furnished by the Government; PROVIDED, however, that the Contractor shall, without additional cost to the Government, arrange marshalling of rail tank cars required for shipments to be made hereunder. Whenever any item of the Schedule specifies delivery by more than one method, selection of the method to be used shall be at Government's option. Government-furnished transportation equipment that the Contractor finds unsatisfactory for loading shall be reported as follows:

(1) TANKERS, SHALLOW DRAFT TANKERS, AND BARGES. Report to the Quality Representative

(QR).

(2) TANK CARS. Report to the QR.

(3) TRANSPORT TRUCKS, TRUCKS AND TRAILERS, AND TANK WAGONS. Report to the QR.

(c) If the supplies are to be delivered f.o.b. tank car, boxcar, truck, transport truck, truck and trailer, or tank wagon at Contractor's refinery, terminal, or bulk plant--

(1) The Contractor shall ship the supplies under Government bills of lading, which will be furnished, or arranged for, by the Ordering Officer. If requested by the Government, the Contractor shall prepare Government bills of lading.

(2) The Contractor shall comply with routing instructions furnished by the Government. Such instructions will include carrier names, routes, route order numbers, and other pertinent information. The Contractor shall be responsible for scheduling of commercial transport trucks, trucks and trailers, and tank wagons to its plant in accordance with such routing instructions and consonant with the applicable order. The Contractor shall reimburse the Government for any demurrage incurred as a result of improper scheduling.

(d) On all tank car and boxcar (carload only) shipments, whether delivery is made on an f.o.b. origin or f.o.b.

destination basis, the Contractor shall send to the consignee at the time of shipment a facsimile or electronic mail notice which shall indicate grade of product, date of shipment, car and seal numbers, bill of lading number, and net quantities.

(e) The Contractor shall furnish serially numbered seals and effectively seal all tank cars, boxcars, transport trucks, trucks and trailers, tankers, shallow draft tankers, and barges, whether delivery is made on an f.o.b. origin or f.o.b. destination basis. The marking on the seal shall be indicated on all shipping documents.

SECTION G: CONTRACT ADMINISTRACTION DATA

G3 INVOICE NUMBERING REQUIREMENTS (DLA ENERGY AUG 1998)

Each invoice submitted for payment under this contract shall be identified by an individual invoice number. The number shall not be duplicated on subsequent invoices. Duplicate invoice numbers or invoices that do not include numbers may be rejected.

G9.06 ADDRESS TO WHICH REMITTANCE SHOULD BE MAILED (DLA ENERGY JAN 2017)

Remittances shall be mailed only at the Government’s option or where an exception to payment by Electronic Funds Transfer (EFT) applies. (See the PAYMENT BY ELECTRONIC FUNDS TRANSFER – SYSTEM FOR AWARD MANAGEMENT or the PAYMENT BY ELECTRONIC FUNDS TRANSFER - OTHER THAN SYSTEM FOR AWARD MANAGEMENT clause.)

Offeror shall indicate below the complete mailing address (including the nine-digit zip code) to which remittances should be mailed if such address is other than that shown in Block 15a (Standard Form (SF) 33) for noncommercial items or Block 17a (SF 1449) for commercial items. In addition, if offeror did not incorporate its nine-digit zip code in the address shown in Block 15a of the SF 33 or in Block 17a of the SF 1449, the offeror shall enter it below:

(a) Payee Name (Contractor): | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

(b) Check Remittance Address:

(DO NOT EXCEED 30 CHARACTERS PER LINE)

(c) Narrative Information (special instructions).

(DO NOT EXCEED 153 CHARACTERS)

G9.07 ELECTRONIC TRANSFER OF FUNDS PAYMENTS - CORPORATE TRADE EXCHANGE (DLA

ENERGY JUL 2007)

(a) The Contractor shall supply the following information to the Contracting Officer no later than 5 days after contract award and before submission of the first request for payment. The bank designated as the receiving bank must be located in the United States and must be capable of receiving Automated Clearing House (ACH) transactions.

NAME OF RECEIVING BANK: | | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 29 CHARACTERS)

CITY AND STATE OF RECEIVING BANK: | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 20 CHARACTERS)

AMERICAN BANKERS ASSOCIATION NINE DIGIT IDENTIFIER OF RECEIVING BANK: | | | | | |

ACCOUNT TYPE CODE: (Contractor to designate one)

[ ] CHECKING TYPE 22

[ ] SAVINGS TYPE 32

RECIPIENT'S ACCOUNT NUMBER ENCLOSED IN PARENTHESES: | | | | | | | | | | | | | | | |

(DO NOT EXCEED 15 CHARACTERS)

RECIPIENT'S NAME: | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

STREET ADDRESS: | | | | | | | | | | | | | | | | | | | | | | | | | |

CITY AND STATE: | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

NOTE: Additional information may be entered in EITHER paragraph (b) OR paragraph (c) below. Total space available for information entered in (b) OR (c) is 153 characters.

(b) SPECIAL INSTRUCTIONS/OTHER IDENTIFYING DATA:

(DO NOT EXCEED 153 CHARACTERS)

OR

(c) THIRD PARTY INFORMATION: Where payment is to be forwarded from the receiving bank to another financial institution for deposit into Contractor's account, the following information must be supplied by the Contractor: Second Bank Name, City/State and/or Country, Account Number, and Account Name.

(DO NOT EXCEED 153 CHARACTERS)

(d) CONTRACTOR'S DESIGNATED OFFICIAL SUBMITTING ELECTRONIC FUNDS TRANSFER

INFORMATION.

NAME: | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

TITLE: | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

TELEPHONE NUMBER: | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

SIGNATURE: ______________________________________________________________________

(e) Any change by the Contractor in designation of the bank account to receive electronic transfer of funds in accordance with this provision must be received by the Contracting Officer no later than 30 days prior to the date the change is to become effective.

(f) The electronic transfer of funds does not constitute an assignment of such funds in any form or fashion.

(g) In the event corporate trade exchange (CTX) payments cannot be processed, the Government retains the option to make payments under this contract by check.

(h) NOTICE TO FOREIGN SUPPLIERS.

(1) Payment may be made through the Federal Reserve Wire Transfer system. The bank designated as the receiving bank must be located in the United States and must be capable of receiving ACH transactions. The appropriate American Bankers Association nine-digit identifier must be supplied in order for payments to be processed through CTX.

(2) If your account is with a foreign bank that has an account with a bank located within the United States, the U.S. bank may be designated as the receiving bank. The recipient's name and account number shall identify the foreign bank, and transfer instructions to supplier's account must be specified in (b) OR (c) above.

(3) The Third Party information supplied in (c) above will be located in the first RMT segment of the CTX payment information sent to the receiving bank.

(i) Notwithstanding any other provision of the contract, the requirements of this provision shall control.

G9.07-5 ELECTRONIC TRANSFER OF FUNDS PAYMENTS – FEDERAL RESERVE WIRE TRANSFER

SYSTEM (DLA ENERGY JAN 2012)

(a) The Contractor shall supply the following information to the Contracting Officer no later than 5 days after contract award and before submission of the first request for payment. The bank designated as the receiving bank must be capable of receiving Federal wire transactions via either a SWIFT Code or an IBAN.

(b) Any change by the Contractor in the designation of the bank account to receive electronic transfer of funds in accordance with this contract text must be received by the Contracting Officer no later than 30 days prior to the date the change is to become effective.

(c) The electronic transfer of funds does not constitute an assignment of such funds in any form or fashion.

COMPLETE THE FOLLOWING INFORMATION (TYPE WRITTEN OR CLEAR PRINTING)

RECIPIENT’S NAME: | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

ORIGINATOR ABA: ____044036205____ (DLA ENERGY fill-in)

CONTRACT NUMBER: ______________________________________________ (DLA ENERGY fill-in)

RECIPIENT’S CAGE CODE: __________________

[ ] CHECKING TYPE 22

[ ] SAVINGS TYPE 32

RECIPIENT’S DUNS NUMBER: ______________________________________

BENEFICIARY’S BANK NAME: | | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 29 CHARACTERS)

BENEFICIARY’S BANK ADDRESS: | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

BENEFICIARY’S BANK ACCOUNT NUMBER: ____________________________________

BENEFICIARY’S BANK SWIFT NUMBER: | | | | | | | | | | | |

(EITHER 8 OR 11 CHARACTERS ONLY)

IBAN NUMBER: ______________________________________

BENEFICIARY’S BANK SORT CODE: | | | | | | | (FOR BANKS IN THE UNITED KINGDOM

ONLY)(6 CHARACTERS ONLY)

(d) CONTRACTOR’S DESIGNATED OFFICIAL SUBMITTING ELECTRONIC FUNDS TRANSFER

INFORMATION.

NAME | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

TITLE | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

TELEPHONE NUMBER | | | | | | | | | | | | | | | | | | | | | | | | | |

(DO NOT EXCEED 25 CHARACTERS)

SIGNATURE _______________________________________________________

(e) Notwithstanding any other provision of the contract, the requirements of this contract text shall control.

G150.07-2 SUBMISSION OF INVOICES FOR PAYMENT (OVERSEAS PC&S) (DLA ENERGY JAN 2012)

(a) GENERAL. This contract is for overseas fuel deliveries for posts, camps, and stations. Invoices will be paid on the basis of the Contractor’s delivery to the point of first receipt by the Government.

(b) INVOICES WILL REFLECT QUANTITIES IN WHOLE NUMBERS AND SHALL BE ROUNDED AS FOLLOWS. Example: 7,529.4 = 7,529 or 7,529.5 = 7.530.

(c) RESPONSIBILITY FOR SUPPLIES. Title to the supplies shall vest in the Government upon delivery to the point of first receipt by the Government. Notwithstanding any other provision or contract text of the contract, the Contractor shall assume all responsibility and risk of loss for supplies (1) not received at destination, (2) damaged in transit, or (3) not conforming to purchase requirements. The Contractor shall either replace or correct such supplies promptly at its expense, provided instructions to do so are furnished by the Contracting Officer within 90 days from the date title to the supplies vests in the Government.

(d) PAYING OFFICE. Invoices for product paid with Defense Logistics Agency/DLA Energy funds, as cited on the order, will be paid by DLA Energy and should be mailed to--

DEFENSE FINANCE AND ACCOUNTING SERVICES – COLUMBUS CENTER

STOCK FUND DIRECTORATE

FUELS ACCOUNTING AND PAYMENT DIVISION

ATTN: PCS VENDOR PAY

PO BOX 182317

COLUMBUS OH 43218-6252

(e) CERTIFICATION OF RECEIPT.

(1) Receiving activity personnel will certify the receipt of fuel by preparing and signing one of the following documents:

(i) Standard Form 1449, Solicitation/Contract/Order for Commercial Items;

(ii) DD Form 1155, Order for Supplies or Services; or

(iii) DD Form 250, Material Inspection and Receiving Report.

(2) Receiving activities shall input receipt information into the Defense Fuel Automated Management Systems (DFAMS) via Fuels Control Center or other electronic systems installed at their activity. A copy of the receipt document shall be submitted to the Contractor. Copies of receipt documents shall be submitted to DLA Energy-N upon request.

(3) Payments to the Contractor will be based on the quantities specified in the receiving report and payments will be made in accordance with the terms of the contract.

(f) SUBMISSION OF INVOICES.

(1) Upon delivery of supplies to the point of first receipt by the Government, the Contractor shall prepare an invoice in accordance with the terms of this contract. (For Germany only, the Contractor shall invoice all products using liters, except FO6 which will be invoiced in kilograms.) The Government prefers that the Contractor submit an invoice for each item for no more or less than the total daily delivered quantity at a particular activity. However, invoices may be submitted on a daily, weekly, bimonthly, or monthly basis. Weekly, bimonthly, and monthly invoices must contain only one item number and only one corresponding delivery order number and must specify the total quantity delivered for each specific delivery date.

(g) SHIPMENT NUMBER TO BE IDENTIFIED ON INVOICES.

(1) For purposes of this contract text and the contract, “shipment number” for PC&S deliveries is defined as a seven position alpha-numeric number.

(2) All invoices processed electronically using the PAPERLESS ORDERING RECEIPTS TRANSACTION SCREENS (PORTS) for PC&S deliveries will contain a Julian date shipment number. A Julian date is defined as Position one

(1) is the year and the last three (3) digits are the day of the year (i.e., 1159…