Attachment D - Product Data for Shades.pdf

Please check all appropriate selections and attach room schedule with verified dimensions.

Large endcaps/brackets and 3" roller may be required.

Small endcaps/brackets and 2" roller are recommended.

WIDTH

2' 3' 4' 5' 6' 7' 8' 9' 10' 11' 12' 13' 14'

H E

IG

H

T

2' 3' 4' 5' 6' 7' 8' 9'

10' 11' 12' 13' 14'

* Sizes requiring large endcaps/brackets will vary according to fabric.

Single Roller Clutch FlexShade Options Fabric Series: ___Sheerweave Infinity2________________ Color name / Number:___IN2-VG2 Midnight________ Openness Factor:_______3%__________________________

Please see Draper's Shade Fabric Reference Guide for fabric colors and specifications.

Select Single Roller Hardware

Endcaps with Fascia

Select Hardware Finish (does not apply to Type "D" or Pocket Headbox) Clear Anodized (standard)

Available Sizes* :

Select Number of Shades per Unit Single Roller (Standard)

Select Clutch Location As seen from INSIDE the room facing the window.

Also indicate on room schedule.

Right (standard) Left

Select Clutch Color

Black

Optional Spring Assist Spring Assist per manufacturer’s standards (as required based on fabric weight)

Select Bead Chain Type Steel Chain

Stainless Steel (standard)

Select Cord Tension Device 'P'-Clip Cord Tension Device (standard)

Select Fabric Orientation Regular Roll (from BACK of roller)

Select Hem Bar Style Closed Pocket - 1" Elliptical Slat (standard)

Safety Note: If shades are to be installed in areas accessible to young children, be certain to use cord tension device included with Bead Chain Clutch shades.

Clutch-operated shades should not be installed near cribs or playpens.

Clutch Operated FlexShade®

Window shade with smooth, quiet operation, and independent control

PROJECT:

ARCHITECT:

CONTRACTOR:

SUPPLIER:

DATE: REVISED:

Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 © 2017 All Rights Reserved | FORM: FlexShadeCL_Sub17

SUBMITTAL

TECHNICAL INFO

RS-1 - Treatment Plant (TP.106) and Main Lab Director Offices (per 09 10 00)

Clutch Operated FlexShade® page 2 of 4

Specifications

EQUIPMENT

BEAD CHAIN CLUTCH OPERATOR: DuPont™ Zytel® nylon resin (glass fiber re-inforced), black or white. Bi-directional for mounting at either end of roller. Control loop, of any length, is a plastic or stainless steel bead chain (standard). Plastic chain in ivory, grey or black. Never needs adjusting. Right hand location standard, left hand available. Patent pending.

OPTIONAL SPRING-ASSIST BEAD CHAIN CLUTCH: Adjustment-free system shall be comprised of various components including a modified clutch and spring assist components. The clutch portion shall be comprised of multi-banded steel springs that create the pressure necessary to keep the shade in the desired position. All plastic components to be made of injected molded parts. All plastic clutch components to be made of glass reinforced polyester thermopolymer (PBT) conforming to military specification MIL M-24519. The clutch shall develop no more than ½ pound drag for easy lift. The Spring Assist assembly components shall be constructed from following materials: ¼" INCH SQUARE ROD: 6061 Aluminum. ROD RETAINER: Acetal plastic such as Delrin 500. Coiled Steel Spring Pin. ENDCAP: Polyester based plastic such as GE Valox 420 or equal quality. SLEEVE: Low density polyethylene. ACTUATOR:

Polyester based plastic such as GE Valox 420 or equal quality. SPRING: ASTM A 228 Stress Relieved High Carbon Steel. There shall be separate springs assist assemblies;

one for left-hand control and one for right-hand control in two lengths each to accom-modate a wide range of shade weight options. The System to be adaptable for left or right hand installation and can be adapted for either standard or reverse roll shades.

The system shall require utilization of proprietary computer software to calculate appropriate spring size, tube diameter and pre-rotation tension. Utilizing proprietary computer software, the Spring Assist assembly shall ensure even lift and lowering forces of approximately 6 lbs or less on any weight fully assembled shade up to the maximum shade weight of 30 lbs.

END PLUG: End plug to consist of an outside sleeve rotating freely on a center shaft, providing the bearing surfaces on which the roller rides. Outside sleeve and center shaft to be made of heat stabilized fiber reinforced plastic to ensure smooth, wear resistant operation.

Patent information available at http://www.draperinc.com/legal/patents/ Downloadable 3-part specifications are available at www.draperinc.com.

Please note:

Dimensions of rollers, operators and hardware at manufacturer’s discretion.

COMPONENTS

ROLLERS (EXCEPT SPRING ROLLERS): Sizes 11/4" dia. x .030 wall, 11/2" dia. with .065 wall, or 2" dia. with .080 wall, in steel or extruded aluminum. Roller assembly easily removable.

MOUNTING BRACKETS: 1018 plated steel stamping. Sizes 15/8" and 2¼". Mount to face, ceiling, or jamb. Brackets do not require additional adapters.

ROLLER IDLER ASSEMBLY: Fiberglass reinforced polyester thermopolymer (PBT), with spring-loaded pin to interlock with mounting bracket.

HEM BAR: Closed Pocket Elliptical Slat: 1" aluminum elliptical slat inside of a 1 5/8" pocket with heat sealed ends. Open Pocket Elliptical Slat: 1" aluminum elliptical slat with plastic ends inside of a 15/8" pocket. Flat Exposed Hem Bar: Small: 7/8" x 5/16" and Large: 1½" x 5/16" aluminum rectangular with plastic end caps. Powder coated in black, bronze, ivory, white or clear anodized. Round Exposed Hem Bar: Small: 5/8" and Large: 13/16" aluminum with plastic end caps. Powder coated in black, bronze, ivory, white or clear anodized.

ENDCAPS: 1018 steel stamping. 2 sizes: 3¼" x 3¾" and 4½" x 4½". Complete with adapter roller bracket. Installs to face, ceiling, or jamb. Accepts box covers and fabric guide.

ENDCAP COVERS: Plastic covers snap onto endcaps. Available in ivory, bronze, black or white to match fascia.

FASCIA: L-shaped or radius cover of extruded aluminum, .060 wall. Assembly snaps onto endcaps without exposed fasteners. Radius fascia on small hardware only-not available on large fascia or crank-operated shades. Clear anodized (standard) finish or black, white, ivory or bronze powder coat finish.

HEADBOX: Standard consists of fascia, L-shaped back/top cover. Assembly snaps onto endcaps. Optional, for pocket installation, includes a U-shaped back/top/front cover with removable bottom closure panel. SMALL SIZE: 37/16" x 315/16". LARGE SIZE: 411/16" x 411/16". Some exposed fasteners required. Clear anodized (standard) finish or black, white, ivory or bronze powder coat finish.

TYPE D POCKET: Type D Shade Pocket, to be fabricated of metal for perimeter instal-lation. Accepts FlexShades installed with ceiling brackets. Finished in white paint. 5" x 53/8" x .125" with 7/8" tile support lip and removable bottom closure. Dual pocket 9½" x 53/8" x .125" with 7/8" tile support lip and removable bottom closure.

BATTENS: In order to ensure proper flatness and tracking, Draper reserves the right to utilize metal battens, installed in pockets across entire width of shade.

"L" ANGLE (¾" x 1" x 12'3", 1" x 2¾" x 16' or cut to length) "U" CHANNEL (1" x 2½" x 16' or cut to length) and "H" CHANNEL (1" x 5" x 16' or cut to length): Accepts side edges of fabric, prevents light gaps. Interior of channel provides for use of flat head screws.

Zytel® is a registered trademark of E. I. du Pont de Nemours and Company.

DuPont™ is a trademark of E. I. du Pont de Nemours and Company.

Mounting Hardware Selections Note: Brackets and endcaps have the only attachment points for mounting a Clutch FlexShade. Optional fascia and headbox have a thickness of 1/16".

Fascia Only with Ceiling or Wall Mounting Endcaps

Endcap Covers

Hardware Selections

5"

53/8"

7/8"1¾" 3" 3¼" 1½"

3"

15/16"

1½"

15/16"

5"

7/8"

1½"

15/16"

3"

15/16"

5"

7/8"

D2 C2

A2

B2

C1

A1

Cloth width with brackets = Overall width - 13/8" Cloth width with endcaps = Overall width - 15/8"

E1

B1

D1

E2

F1 Overall Height

13/16" 13/16"

Clutch Operated FlexShade Dimensions (Fascia Overall Width includes plastic endcap covers) (Pair adds 1/8" to Overall Width)

Headbox with Endcaps

Fascia with Endcaps Brackets*

Small Large Small Large Small Large A¹ 3 15/16" 4 11/16" 3 7/8" 4 5/8" A² 2 3/16" 2 3/16" B¹ 3 7/16" 4 11/16" 3 3/8" 4 5/8" B² 2 3/8" 3” C¹ 5/8" 5/8" 5/8" 5/8" C² 11/16" 11/16" D¹ 2" 3 ¼" 2" 3 ¼" D² 1 5/8" 2 ¼" E¹ 1/16" 3/32" 1/16" 3/32" E² 1 ¾" 1 ¾" F¹ 1 3/16" 1 9/16" 1 3/16" 1 9/16" F² N/A N/A (Fascia Overall Width includes plastic endcap covers) (Pair adds 1/8" to Overall Width)

D2 C2

A2

B2

C1

A1

Cloth width with brackets = Overall width - 13/8" Cloth width with endcaps = Overall width - 15/8"

E1

B1

D1

E2

F1 Overall Height

13/16" 13/16"

D2 C2

A2

B2

C1

A1

Cloth width with brackets = Overall width - 13/8" Cloth width with endcaps = Overall width - 15/8"

E1

B1

D1

E2

F1 Overall Height

13/16" 13/16"

Above dimensions based upon 20 lb. clutch and 1½" diameter roller.

* Small brackets are supplied with #10 and #20 clutch. Large bracket optionally available at Draper's discretion. For #24 clutch, contact Draper for dimensions.

PLEASE NOTE:

When measuring shade height, remember to include endcaps and fascia or headbox.

RS-1

Clutch Operated FlexShade® page 4 of 4

FlexShade Components

4 5/8”4

4 5/8”W x 4 5/8” H

3 LARGE PLASTIC ENDCAP COVER

4 LARGE ENDCAP

7 SPRING LOADED IDLER END

8 SLAT BAR—21/8” SEALED HEM POCKET

9 CLUTCH

10 BEAD CHAIN WITH HOLD DOWN

12 LARGE ALUMINUM FASCIA

PANEL

Clutch FlexShade Components

Scanned by CamScanner

VG4 Slate - Discontinued