Attachment C RFB 758 2700000016 - M00072_FlexShade CLN Small Endcap_Fascia_Regular Roll_Outside Mount_Face.pdf

This is a technical product submittal document for FlexShade CLN window shade equipment specified in RFB 758 2700000016. The document provides detailed specifications and installation guidelines for a FlexShade CLN Small Endcap model with fascia, regular roll configuration, and outside mount design. The submittal includes comprehensive technical drawings and dimensional specifications for the shade assembly, including components such as the tube, spline roller fascia, chain, shade fabric, and hem pocket. Key specifications indicate a shade height measurement of 523 units with specific dimensional requirements including a 5 3/16 inch [84.6mm] vertical mullion measurement, 3 7/8 inch [98.2mm] window sill depth, and a 4 1 3/16 inch [30.5mm] hem pocket dimension. The document notes that the chain should be 6 inches shorter than the shade height and that the maximum bundle diameter is O23 4 [O69.9mm].

The document specifies blocking requirements for installation, recommending a minimum 2X wood blocking measuring 2-3/4 inches [69.9mm] in plywood or dimensional lumber, or alternatively minimum 18-gauge flat sheet steel. All fasteners are noted as being supplied by others. The submittal includes user notes indicating that drawing layers have been incorporated to allow adaptation to project-specific details through standard editing software. Draper, the manufacturer, reserves the right to discontinue or modify products without notice, and all dimensions are provided in both inches and millimeter conversions for construction clarity.