Attachment C - LIT Safety and Security Requirements for Construction Projects Rev1225.pdf
PDF 297 KB Posted
- Attached to
- Internet Services
- Solicitation number
- 148135
- Issued by
- Pulaski County, Arkansas
About this file
This document is a revised attachment from the Little Rock Municipal Airport Commission outlining security and safety requirements for construction contractors working at Bill and Hillary Clinton National Airport (LIT) in Arkansas. The document establishes comprehensive protocols for airside construction (within the perimeter fence and Airport Operations Area), landside construction (outside the perimeter fence), and associated badging requirements. All airside construction activities must access the airport through TSA-approved entry points, with contractors required to submit Changes of Conditions through the Airport Security Coordinator at least 30 days in advance for any altered access routes, haul routes, or temporary fencing. Additionally, all construction work on the airside requires display of airport-issued ID badges or proper escort by badge-holding personnel, with Notices to Airmen (NOTAMs) submitted at least 72 hours prior to work commencement. The document specifies compliance with current FAA Advisory Circulars and establishes badging procedures including Security Threat Assessments and Criminal History Records Checks for all personnel.
Prime contractors are required to designate at least one Signatory Authority who must complete annual training and maintain control of all issued badges. The document outlines a detailed fee schedule for badging services, ranging from $40 for fingerprinting to $300 for a Cyberkey, with additional costs for badge replacements ($50–$150 for subsequent lost badges) and unreturned badges upon employee termination ($100–$250 depending on access level). Training requirements are specified for all badge types, including Signatory Training (45 minutes), SIDA Training (1 hour), Movement Training (1.5 hours), and Escort Training (30 minutes). Contractors are responsible for all costs associated with badge processing, training, and vehicle permits, and are subject to federal civil penalties and badge suspension for security violations by their employees. A Work Area Notification must be submitted 72 hours prior to work, with additional Information Technology/Security Modification forms required for work affecting security or IT equipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment A - Response Packet.pdf | ||
| Attachment B - Drawings.pdf | ||
| Industry Day Material (compiled).pdf | ||
| 26004RFP - Internet Services.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Revised December 2025
Little Rock Municipal Airport Commission
Information for Potential Bidders/Contractors Regarding the Security and Operations Requirements for Construction Projects at Bill and Hillary Clinton National Airport (LIT)
Little Rock
Introduction
Construction on an airport has regulatory requirements not experienced in the non-airport construction world. The airport is obligated to follow Department of Transportation, Federal Aviation Administration, Department of Homeland Security (TSA and CPB) and other federal codified regulations. In addition, the airport is required to comply with TSA Security Administration Security Directives and FAA Advisory Circulars. This guide will outline airport-specific requirements to assist in bidding airport construction projects.
Airside Construction
1. Airside Construction Activities. Airside Construction is any construction occurring within the perimeter fence of the airport. The area within the Airport’s perimeter security fence is also call the Airport Operations Area (AOA). Access to the AOA is restricted to those individuals granted an Airport ID badge, or to those who are properly escorted by those individuals granted an Airport ID badge with escort privileges. Examples of airside construction include Runway, Taxiway, Ramp and NAVAIDs construction.
a. Security requirements. All airside construction activities must access the airfield through an Airport Security approved access point. Openings in the Airport’s perimeter security which allow access to the AOA are typically referred to as “AOA doors” or “AOA gates” and are numbered with signage for reference and wayfinding. The standard access procedures for usage of AOA doors and AOA gates to gain access to the AOA are included in the training provided by the Airport and required to obtain an Airport identification (ID) badge. Access gates, haul routes, temporary fencing and non-standard access procedures require a TSA approved Change of Conditions. The request for a Change of Conditions require a 30-day advance submission to the Airport Security Coordinator. The Airport Security Coordinator will route the change through TSA to comply with federal security requirements. TSA’s requirement is 30-day advance submission. Once a company is the successful bidder, it is the contractor’s responsibility to schedule an appointment, with the Airport Security Coordinator, to identify and initiate “Changes of Conditions” that will occur during the entire project to prevent any construction interruptions. Any violations of federal security regulations or directives are punishable by TSA through civil fines to airports, individuals and/or companies.
b. FAA Advisory Circulars. All Airside construction is required to comply with the current FAA Advisory Circulars. Despite the name, Advisory Circulars are regulatory in nature for commercial service airports certified under 14 CFR Part 139.
c. Work requiring Notices to Airmen (NOTAMs) must be submitted to Airport Operations no less than 72 hours prior to work requiring the NOTAM(s).
2. Landside Construction Activities. Landside Construction is any construction outside the airport perimeter fence, and includes pre-security checkpoint and parking areas. An airport issued ID badge is not required for these construction activities.
3. Badging requirements. All construction activities on the Airside (inside the perimeter fence or within the AOA), within the Secured (terminal aircraft ramp) or Sterile (Concourse) areas of the airport require display of airport badge media or escort by an escort-approved airport badge holder. The designated escort badge-holder must have a clearance for the areas in which they are escorting.
a. Work authorization: All persons performing work on the airport must be U.S.
citizens or authorized to work in the United States.
b. Prime contractors are required to have at least one Signatory Authority for badge applications. This person must have an airport badge and successfully complete the annually required Signatory Training. The prime contractor Signatory Authority can sign for sub-contractor badge applications. If the contract is a large job, the sub-contractor may be required to provide their own Signatory Authority.
The Signatory Authority is responsible for maintaining control, inventory and audit of badges assigned to their personnel. A company is allowed up to three Signatory Authorities (Primary and two alternates). Any information on Badge applicants can only be discussed with the Signatory Authorities. The Signatory Authority is also responsible for immediately notifying the Badging Office or Airport Operations when a badge is lost, stolen, or employee is terminated.
Annual/Random audits are required of the airport by TSA to ensure positive control of airport access media.
c. All persons applying for an airport badge are required to submit fingerprints for a Security Threat Assessment (STA) and Criminal History Records Check (CHRC).
Fingerprints expire 30 days from the initial submission of fingerprints. The process has to start all over if a badge is not issued within the first 30 days. It normally takes 2-3 days but can take up to 2 weeks to receive the STA and CHRC results.
These results are required prior to a person attending required badge training.
Persons with certain law violations, within the last 10 years, may be disqualified for an airport badge. A list of the disqualifying law violations are available from the airport Badging Office. Any person denied a badge cannot be escorted.
d. The airport participates in the FBI RAPBACK program. If a badged person experiences a law violation after receiving a badge, the FBI sends notification of the charge to the airport. Judicial outcome can result in permanent revocation of badge per federal security requirements. Revoked badge holders cannot be escorted.
e. There are costs to the contractor/sub-contractor associated with obtaining badges and changing/replacing the initial badge. These costs and estimated training times are outlined in the table of charges.
f. When submitted for an airport badge, the Signatory Authority is required to determine the level of access/authority required for the badge applicant. This includes drivers for both Movement/Non-movement areas, escort privileges and must define the area required to ensure the proper color of badge issued. All applicants are required to bring two forms of valid identification. The documents list and badging requirements are available in the Airport Badging Office.
g. Escort privileges are established according to construction activity, type of escorting (confined work area versus vehicle escorting) and the ratio one escort can positively control for the type of escorting performed. This requirement is discussed in the pre-bid meeting.
h. Badge applicants are required to complete computer-based training. Successful completion is a 100 percent on the final test(s).
i. Driving privileges require extra training. This training includes computer-based training, a tower tour (Movement Area Driver) and a check-ride by an Airport Operations Duty Manager (Movement Area Driver). The movement training process can take up to 2-3 weeks and should be completed as part of the initial badge process when possible.
4. Security/Work Area Requirements.
a. Change of Conditions submitted through the Airport Security Coordinator are required anytime an altered access, haul route, SIDA boundary or perimeter fencing is necessary for the project. The Airport Security Coordinator must submit to TSA 30-days prior to execution. Altered conditions cannot proceed until the Airport Security Coordinator receives TSA approval.
b. A Work Area Notification (WAN) form or Information Technology/Security Modification (ITSM) form must be submitted at least 72 hours prior to the proposed start of work. Templates for these forms are provided by the Airport.
c. Submittal of a Work Area Notification (WAN) is provided by the Contractor for the Airport’s internal distribution and notification to parties affected by proposed construction activities.
d. An ITSM is required for any work that impacts access control equipment, alarms, CCTV cameras, IDF/MDF rooms or other security/IT related areas or equipment.
An ITSM requires the approval of specific Airport personnel prior to the start of the proposed work.
e. Security violations committed by contractor employees can result in federal civil penalties to the airport, contractor and/or individual. The contractor will be billed for any civil penalties received by the airport, due to failure of contractor’s employee(s) to follow security procedures. Any security violations committed by contractor employees may result in a Badge suspension of up to 5 days.
Table of Charges
BADGING TIME
REQUIRED
COST
PER UNIT
NOTES
Fingerprint for Badging 15 minutes $40.00 Required
Security Threat Assessment (STA) $10.00 Processed with fingerprints
Badge (New) 10 minutes $16.00 Proper documents required
Badge (Renewal) 15 minutes $26.00 STA plus badge cost
Badge (Upgrade, i.e. movement, escort, etc.) 10 minutes $10.00 Paid by company
Badge ( Lost), First replacement 10 minutes $50.00 Usually paid by individual
Badge (Lost), Second replacement 10 minutes $100.00 Usually paid by individual
Badge (Lost), Third replacement 10 minutes $150.00 Usually paid by individual
Cyberkey 15 minutes $300.00 Returned upon operable key turn-in.
Controlled item. Key must remain with person issued to
Badge Audit 30 minutes N/A Annual TSA requirement/Possible random audit
Unreturned Badges (i.e. Employee termination) N/A $100.00(SIDA)
$250.00(sterile & temp)
Paid by company
TRAINING
Signatory CBT (Project manager or designated company representative)
45 minutes N/A Required to sign badge applications
Secured Identification Area (SIDA) Training 1 hour N/A Required for all badges
Non-Movement Training 1 hour N/A Required for AOA drivers
Movement Training 1.5 hours N/A Non-movement training required prior to Movement Training
Taxiway/Runway Identification test 15 minutes N/A Map test
Movement certification with Ops Duty Manager 1 hour N/A Practical test
Escort Training 30 minutes N/A Required for personnel that have an official need to escort un-badged persons
Safety Management Systems Training 10 minutes N/A Required for all badges
VEHICLE PERMITS/PARKING
AOA permit for properly labeled construction vehicles (no personal vehicles)
10 minutes N/A Certificate of Liability insurance
Construction Personal Vehicle (Blue Hang Tag) 10 minutes N/A Vehicle/Personnel Identification forms are required for designated
| Airside Construction |
| 4. Security/Work Area Requirements. |
File details come from the government source that posted it. Updated .