Attachment B - EV Charging Station Drawings.pdf

COVER SHEET

ELECTRICAL VEHICLE (EV) CHARGING STATIONS

NATIONAL CONSERVATION

698 CONSERVATION WAY

TRAINING CENTER

SHEPHERDSTOWN, WEST VIRGINIA 25443

LOCATION MAP

VICINITY MAP

G:\ENGINEER STAMPS\RFK\RFK_NO-DATE.tif

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text C0.1

AutoCAD SHX Text

AutoCAD SHX Text C:\Users\jlmiller\OneDrive - DOI\Desktop\EV Charging\EV Charging CAD files\ACAD-C0.1 Cover Sheet.dwg 6/9/2020 10:55 AM 6/9/2020 10:55 AM6/9/2020 10:55 AM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

PROFESSIONAL SEAL

© Copyright 2020 DuBois & King Inc.

97 PARK STREET

SPRINGFIELD, VT 05156

TEL: (802) 591-4326

FAX: (866) 783-7101

www.dubois-king.com

CAMPUS

COMPOSITE KEY PLAN

AutoCAD SHX Text

GRAPHIC SCALE 1" = 250'

AutoCAD SHX Text

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

CAMPUS COMPOSITE KEY PLAN

AutoCAD SHX Text C:\Users\jlmiller\OneDrive - DOI\Desktop\EV Charging\EV Charging CAD files\ACAD-E0.1 Campus Key Plan.dwg 6/9/2020 10:57 AM 6/9/2020 10:57 AM6/9/2020 10:57 AM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text U.S.

AutoCAD SHX Text

FISH & WILDLIFE

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

DE

AutoCAD SHX Text

PA

AutoCAD SHX Text

RT

AutoCAD SHX Text

ME

AutoCAD SHX Text

NT

AutoCAD SHX Text 0F

AutoCAD SHX Text

TH

AutoCAD SHX Text E

AutoCAD SHX Text

IN

AutoCAD SHX Text

TE

AutoCAD SHX Text

RI

AutoCAD SHX Text

OR

AutoCAD SHX Text

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text

AutoCAD SHX Text 250'

AutoCAD SHX Text 500'

AutoCAD SHX Text

AutoCAD SHX Text E1.1

AutoCAD SHX Text REFER TO 'BLUE LOT' (12 EV CHARGING STATIONS REQUIRED AND 'GREEN LOT' DETAILS (6 EV CHARGING STATIONS REQUIRED).

AutoCAD SHX Text E0.1

97 PARK STREET

SPRINGFIELD, VT 05156

TEL: (802) 591-4326

FAX: (866) 783-7101

www.dubois-king.com

GENERAL WORK NOTES

AND TYPICAL DETAILS

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

TO EV CHARGING STATION G3

AutoCAD SHX Text

FRONT ELEVATION

AutoCAD SHX Text

(2) 4" GALVANIZED STEELCONDUITS (VERTICAL SUPPORT POSTS).

AutoCAD SHX Text

3/4" CHAMFER ALL-AROUND. 1/2" SLOPE (AWAY FROM POST)

AutoCAD SHX Text NEW NEMA 4X PAINTED STAINLESS STEEL PANEL 'SS EV-2'. SEE DRAWING E2.0 FOR PANEL SCHEDULE AND DRAWING E1.5 FOR APPROXIMATE LOCATION (EXACT LOCATION TO BE COORDINATED W/ COR).

AutoCAD SHX Text FROM NEW PANEL 'SS EV-1' @ 30kVA TRANSFORMER IN ELECTRIC ROOM.

AutoCAD SHX Text GALVANIZED STEEL UNISTRUT OR APPROVED EQUAL) PANEL SUPPORT. STEEL FRAME SHALL BE PAINTED GREEN (COLOR BY COR) W/ APPROVED PAINT AND PAINTING APPLICATION METHOD. SUPPORT UNISTRUT WITH SS U-CLAMPS AND SS HARDWARE, TYPICAL.

AutoCAD SHX Text C:\Users\jlmiller\OneDrive - DOI\Desktop\EV Charging\EV Charging CAD files\ACAD-E0.2 Detail Series.dwg 6/9/2020 10:52 AM 6/9/2020 10:52 AM6/9/2020 10:52 AM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text U.S.

AutoCAD SHX Text

FISH & WILDLIFE

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

DE

AutoCAD SHX Text

PA

AutoCAD SHX Text

RT

AutoCAD SHX Text

ME

AutoCAD SHX Text

NT

AutoCAD SHX Text 0F

AutoCAD SHX Text

TH

AutoCAD SHX Text E

AutoCAD SHX Text

IN

AutoCAD SHX Text

TE

AutoCAD SHX Text

RI

AutoCAD SHX Text

OR

AutoCAD SHX Text

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text

WS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

ELECTRICAL WORKING SPACE AND DEDICATED SPACE REQUIREMENTS @ PANELBOARDS

AutoCAD SHX Text E0.2

AutoCAD SHX Text

LUMINAIRE PERMITTED

AutoCAD SHX Text

WORKING SPACE (CLEARANCE)

AutoCAD SHX Text

WORKING SPACE (CLEARANCE)

AutoCAD SHX Text PANELBOARD: NOT REQUIRED TO BE CENTERED IN WORKING SPACE. MOUNTING BACKBOARD (MB) NOT SHOWN FOR CLARITY)

AutoCAD SHX Text

PANELBOARD SIDE VIEW

AutoCAD SHX Text

PANELBOARD FRONT VIEW

AutoCAD SHX Text

FOREIGN SYSTEMS NOT PERMITTED

AutoCAD SHX Text

THE WORKING SPACE REQUIRED PER NEC SECTION 110.26 IN FRONT OF A PANELBOARD.

AutoCAD SHX Text

WORKING SPACE REQUIREMENT PER NEC 110

AutoCAD SHX Text

PANELBOARD SIDE VIEW

AutoCAD SHX Text

PANELBOARD FRONT VIEW

AutoCAD SHX Text

WORKING SPACE REQUIREMENT PER NEC 110

AutoCAD SHX Text

MB

AutoCAD SHX Text

MB

AutoCAD SHX Text

NOTE: PLYWOOD BACKBOARD REQUIRED UNLESS NOTED OTHERWISE ON PLANS

AutoCAD SHX Text

POWER PANEL PPK1 120/240V, 1 , 3WFED FROM MDP

AutoCAD SHX Text NOTES: 1. PROVIDE NAMEPLATES FOR ALL PANELS, PROVIDE NAMEPLATES FOR ALL PANELS, TRANSFER SWITCHES, DISCONNECTS, SURGE PROTECTION DEVICES AND ENCLOSED ELECTRICAL EQUIPMENT, TYPICAL. 2. PROVIDE NEW TYPED DIRECTORY CARDS PROVIDE NEW TYPED DIRECTORY CARDS FOR ALL PANELS THAT HAVE BEEN MODIFIED. 3. SECURE NAMEPLATE TO SURFACES WITH SECURE NAMEPLATE TO SURFACES WITH (2) FLAT-HEAD BRASS SCREWS. SEAL WATERTIGHT W/ SILICONE.

AutoCAD SHX Text

DENOTES PANEL NAME

AutoCAD SHX Text

DENOTES PANEL VOLTAGE

AutoCAD SHX Text

DENOTES PANEL SOURCE

AutoCAD SHX Text

AutoCAD SHX Text

SPRINKLER PIPE PERMITTED

AutoCAD SHX Text

FOREIGN SYSTEMS NOT PERMITTED

AutoCAD SHX Text

LUMINAIRE PERMITTED

AutoCAD SHX Text EXISTING CONDITIONS NOTES: 1. LOCATIONS OF EXISTING TREES, SHRUBS, UNDERGROUND UTILITIES/CONDUIT, LOCATIONS OF EXISTING TREES, SHRUBS, UNDERGROUND UTILITIES/CONDUIT, BURIED TANKS, FENCING, EDGE OF PAVEMENT, SIDEWALKS, ETC. ARE APPROXIMATE AND MUST BE FIELD VERIFIED PRIOR TO COMMENCEMENT OF WORK, TYPICAL.

AutoCAD SHX Text

SYMBOLOGY LEGEND: (NOT ALL SYMBOLS MAY BE USED): (NOT ALL SYMBOLS MAY BE USED)

AutoCAD SHX Text LIGHT AND/OR DASHED LINEWORK DENOTES EXISTING HEAVY LINEWORK DENOTES PROPOSED LIMITS OF CONSTRUCTION AND/OR DISTURBANCE TEMPORARY CONSTRUCTION FENCE

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

PROPOSED

AutoCAD SHX Text EXISTING TREE LINE EXISTING TREE/SHRUB (NOT ALL SHOWN) CHAIN LINK FENCE (NEW FENCE SHALL BE 6' HIGH) EXISTING WOOD/CHAIN LINK FENCE UNDERGROUND ELECTRICAL (SEE ONE-LINE DIAGRAMS FOR NEW CONDUIT/CABLE SIZES AND QUANTITIES, TYPICAL). UNDERGROUND CONDUITS SHALL BE SCHEDULE 40 PVC UNLESS NOTED OTHERWISE. HORIZONTAL DIRECTIONAL DRILLING (HDD) UNDERGROUND TELEPHONE SERVICE UNDERGROUND LIQUID PROPANE (LP) GAS LINE UNDERGROUND CONTROL/SIGNAL CONDUIT (SEE ONE-LINE DIAGRAMS FOR NEW CONDUIT/CABLE SIZES AND QUANTITIES, TYPICAL). ELECTRICAL EQUIPMENT AND APPURTENANCES

AutoCAD SHX Text

AFG AWG BFG CKT COR HCP HYD GND HH HDD LB MTD NIC OC OD PVC NEC RGS SPD UG WP

AutoCAD SHX Text ABOVE FINISHED GRADE AMERICAN WIRE GAUGE (STANDARDIZED WIRE GAUGE SYS) BELLOW FINISHED GRADE CIRCUIT CONTRACTING OFFICER'S REPRESENTATIVE HANDICAP PARKING FIRE HYDRANT GROUND HANDHOLE HORIZONTAL DIRECTIONAL DRILLING 90 DEGREE/LONG RADIUS ELBOW MOUNTED NOT IN CONTRACT ON CENTER OUTSIDE DIAMETER POLYVINYL CHLORIDE (SCHEDULE 40 CONDUIT) NATIONAL ELECTRICAL CODE RIGID GALVANIZED STEEL (CONDUIT) SURGE PROTECTION DEVICE (SPD1: INTERIOR / SPD4: EXTERIOR) UNDERGROUND WEATHERPROOF

AutoCAD SHX Text

ABBREVIATIONS LEGEND:

AutoCAD SHX Text

5/32" HOLE

AutoCAD SHX Text

STRUCTURAL CEILING

AutoCAD SHX Text

DEDICATED ELECTRICAL SPACE

AutoCAD SHX Text

STRUCTURAL CEILING

AutoCAD SHX Text GENERAL WORK NOTES: : 1. THE SCOPE OF WORK IS TO PROVIDE ALL LABOR, MATERIALS, SERVICES, THE SCOPE OF WORK IS TO PROVIDE ALL LABOR, MATERIALS, SERVICES, SUPPLIES, TOOLS, EQUIPMENT, TRANSPORTATION, AND FACILITIES NECESSARY TO FURNISH AND INSTALL COMPLETE ELECTRICAL WORK AS CALLED FOR ON THE DRAWINGS, SPECIFIED, OR AS MAY REASONABLY BE IMPLIED AS BEING INCIDENTAL TO THIS WORK. 2. ALL MATERIALS AND INSTALLATION SHALL BE IN ACCORDANCE WITH THE LATEST ALL MATERIALS AND INSTALLATION SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF THE NATIONAL ELECTRICAL CODE, AND ALL CODES, REGULATIONS AND REQUIREMENTS OF ALL MUNICIPAL, STATE, FEDERAL AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH HAVE JURISDICTION. IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. 3. DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE GENERAL ARRANGEMENT OF DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE GENERAL ARRANGEMENT OF WORK. BASIC DESIGN CONCEPTS INDICATED ARE MINIMAL AND MUST BE EITHER FOLLOWED OR BETTERED. WORK IS NOT SHOWN IN DETAIL BUT IS INTENDED TO INCLUDE ITEMS NECESSARY FOR PROPER OPERATION AND COMPLETION. DO NOT SCALE DRAWINGS. FIELD VERIFY ALL LOCATIONS, ELEVATIONS, AND DIMENSIONS. 4. EXECUTE ALL WORK IN A NEAT AND WORKMANLIKE MANNER IN CONFORMANCE EXECUTE ALL WORK IN A NEAT AND WORKMANLIKE MANNER IN CONFORMANCE WITH BEST MODERN TRADE PRACTICE, BY COMPETENT, EXPERIENCED MECHANICS, PRESENTING A NEAT APPEARANCE WHEN COMPLETED. REPLACE WORK NOT APPROVED BY COTR WITHOUT ADDITIONAL CHARGE. 5. PROVIDE A SEPARATE GREEN GROUND WIRE IN ALL POWER CIRCUITS. PROVIDE A SEPARATE GREEN GROUND WIRE IN ALL POWER CIRCUITS. 6. EACH JUNCTION IN ANY OF THE WIRING SYSTEMS SHALL BE MADE IN AN EACH JUNCTION IN ANY OF THE WIRING SYSTEMS SHALL BE MADE IN AN APPROVED, METALLIC JUNCTION BOX. SUCH BOX SHALL BE SUITABLE FOR THE SIZE AND NUMBER OF CONDUCTORS AND DEVICES TO BE INSTALLED, AS WELL AS THE CONDITION ENCOUNTERED. ALL SPLICES SHALL BE MADE WITH APPROVED, MECHANICAL CONNECTORS. 7. DURING ROUGH IN AND FINISHED STAGES OF CONSTRUCTION, THE ELECTRICAL DURING ROUGH IN AND FINISHED STAGES OF CONSTRUCTION, THE ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE TO PROTECT AND KEEP CLEAN ALL ELECTRICAL EQUIPMENT, PANELBOARDS AND ASSOCIATED DEVICES. 8. AS THERE MAY BE VARIOUS CONDITIONS AT THE SITE WHICH DO NOT SHOW ON AS THERE MAY BE VARIOUS CONDITIONS AT THE SITE WHICH DO NOT SHOW ON THE ACCOMPANYING DRAWINGS, OR WHICH ARE AT VARIANCE WITH THE CONDITIONS INDICATED ON THE DRAWINGS, IT IS IMPORTANT THAT EACH BIDDER VISIT THE SITE AND ACQUAINT THEMSELVES WITH EXISTING CONDITIONS AND TAKE THESE CONDITIONS INTO CONSIDERATION WHEN PREPARING THEIR BID. EACH BIDDER SHALL OBTAIN INFORMATION OR MAKE ANY MEASUREMENT REQUIRED FOR PROJECT. LACK OF KNOWLEDGE RELATIVE TO EXISTING SITE CONDITIONS WILL NOT BE ALLOWED AS A BASIS FOR EXTRA COMPENSATION. 9. THE FINISHED INSTALLATION SHALL BE COMPLETE IN EVERY RESPECT AND DETAIL, THE FINISHED INSTALLATION SHALL BE COMPLETE IN EVERY RESPECT AND DETAIL, TESTED AND LEFT READY IN PERFECT OPERATING CONDITION FOR THE GOVERNMENT'S USE. 10. MATERIALS AND EQUIPMENT SHALL BE LISTED BY UNDERWRITERS' LABORATORIES MATERIALS AND EQUIPMENT SHALL BE LISTED BY UNDERWRITERS' LABORATORIES (UL) OR STATE OF WEST VIRGINIA ACCEPTABLE TESTING AGENCY AND SHALL BE INSTALLED IN ACCORDANCE WITH SUCH LISTINGS. 11. THE CONTRACTOR SHALL GUARANTEE THAT MATERIALS, EQUIPMENT AND THE CONTRACTOR SHALL GUARANTEE THAT MATERIALS, EQUIPMENT AND WORKMANSHIP PROVIDED SHALL BE FREE FROM DEFECTS IN MATERIALS OR WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM THE DATE OF ACCEPTANCE OF THE WORK DONE UNDER THIS CONTRACT, AND SHALL REPLACE PARTS FOUND TO BE DEFECTIVE WITHIN THE PERIOD COVERED BY SUCH GUARANTEE, WITHOUT COST TO THE GOVERNMENT. 12. INSTALLATION(S) SHALL BE MADE IN ACCORDANCE SPECIFICATIONS, DRAWING INSTALLATION(S) SHALL BE MADE IN ACCORDANCE SPECIFICATIONS, DRAWING COMPLIANCE AND WITH MANUFACTURER'S RECOMMENDATIONS. 13. SOIL WHICH REQUIRES REMOVAL FOR THE INSTALLATION OF POSTS, SUPPORT SOIL WHICH REQUIRES REMOVAL FOR THE INSTALLATION OF POSTS, SUPPORT PEDESTAL STRUCTURES, CONCRETE PADS (FOR NEW PAD MOUNTED EQUIPMENT) ETC., SHALL BE DISPOSED OF AS DIRECTED BY THE COTR. SOIL SHALL NOT BE REMOVED FROM FEDERAL LAND, TYPICAL.

AutoCAD SHX Text

SUSPENDED OR HARD CEILING

AutoCAD SHX Text

NP

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NAMEPLATE REQUIREMENTS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

MOUNTING PEDESTAL FOR PANEL 'SS EV-2'

AutoCAD SHX Text

MP

AutoCAD SHX Text E1.5

AutoCAD SHX Text

HDD

SURFACE RESTORATION NOTES: GENERAL: HARROW AND TILL TO A DEPTH OF 100 MM (4 INCHES), NEW OR EXISTING LAWN HARROW AND TILL TO A DEPTH OF 100 MM (4 INCHES), NEW OR EXISTING LAWN AREAS TO REMAIN, WHICH ARE DISTURBED DURING CONSTRUCTION. ESTABLISH EXISTING OR DESIGN GRADES BY DRAGGING OR SIMILAR OPERATIONS. DO NOT CARRY OUT LAWN AREAS EARTHWORK OUT WHEN THE SOIL IS WET SO THAT THE TILTH OF THE SOIL WILL BE DESTROYED. PLANT BED MUST BE APPROVED BY RESIDENT ENGINEER BEFORE SEEDING OR SODDING OPERATION BEGINS. FINISHED GRADING: BEGIN FINISH GRADING AFTER ROUGH GRADING HAS HAD SUFFICIENT TIME FOR BEGIN FINISH GRADING AFTER ROUGH GRADING HAS HAD SUFFICIENT TIME FOR SETTLEMENT. SCARIFY SUBGRADE SURFACE IN LAWN AREAS TO A DEPTH OF 100 MM (4 INCHES). APPLY TOPSOIL SO THAT AFTER NORMAL COMPACTION, DRAGGING AND RAKING OPERATIONS (TO BRING SURFACE TO INDICATED FINISH GRADES) THERE WILL BE A MINIMUM OF 4 INCHES OF TOPSOIL OVER ALL LAWN AREAS; MAKE SMOOTH, EVEN SURFACE AND TRUE GRADES, WHICH WILL NOT ALLOW WATER TO STAND AT ANY POINT. SHAPE TOP AND BOTTOM OF BANKS TO FORM REVERSE CURVES IN SECTION; MAKE JUNCTIONS WITH UNDISTURBED AREAS TO CONFORM TO EXISTING TOPOGRAPHY. SOLID LINES WITHIN GRADING LIMITS INDICATE FINISHED CONTOURS. EXISTING CONTOURS, INDICATED BY BROKEN LINES ARE BELIEVED APPROXIMATELY CORRECT BUT ARE NOT GUARANTEED. FERTILIZING: INCORPORATE FERTILIZER INTO THE SOIL TO A DEPTH 4 INCHES AT A RATE OF 25 INCORPORATE FERTILIZER INTO THE SOIL TO A DEPTH 4 INCHES AT A RATE OF 25 POUNDS PER 1000 SQUARE FEET. SEEDING: SEED AT A RATE OF 2 4 POUNDS PER 1000 SQUARE FEET AND ACCOMPLISHED ONLY SEED AT A RATE OF 2 4 POUNDS PER 1000 SQUARE FEET AND ACCOMPLISHED ONLY DURING PERIODS WHEN UNIFORM DISTRIBUTION MAY BE ASSURED. LIGHTLY RAKE SEED INTO BED IMMEDIATELY AFTER SEEDING. ROLL SEEDED AREA IMMEDIATELY WITH A ROLLER NOT TO EXCEED 225 KG/M (150 POUNDS PER FOOT) OF ROLLER WIDTH. SODDING: TOPSOIL SHALL BE FIRMED BY ROLLING AND DURING PERIODS OF HIGH TEMPERATURE TOPSOIL SHALL BE FIRMED BY ROLLING AND DURING PERIODS OF HIGH TEMPERATURE THE TOPSOIL SHALL BE WATERED LIGHTLY IMMEDIATELY PRIOR TO LAYING SOD. SOD STRIPS SHALL BE TIGHTLY BUTTED AT THE ENDS AND STAGGERED IN A RUNNING BOND FASHION. PLACEMENT ON SLOPES SHALL BE FROM THE BOTTOM TO TOP OF SLOPE WITH SOD STRIPS RUNNING ACROSS SLOPE. SECURE SODDED SLOPES BY PEGGING OR OTHER APPROVED METHODS. ROLL SODDED AREA WITH A ROLLER NOT TO EXCEED 150 POUNDS PER FOOT OF THE ROLLER WIDTH TO IMPROVE CONTACT OF SOD WITH THE SOIL. WATERING: AS SODDING IS COMPLETED IN ANY ONE SECTION, THE ENTIRE SODDED AREA SHALL AS SODDING IS COMPLETED IN ANY ONE SECTION, THE ENTIRE SODDED AREA SHALL BE THOROUGHLY IRRIGATED BY THE CONTRACTOR, TO A SUFFICIENT DEPTH, THAT THE UNDERSIDE OF THE NEW SOD PAD AND SOIL, IMMEDIATELY BELOW SOD, IS THOROUGHLY WET.

EV

CHARGING

ONLY

PROFESSIONAL SEAL

© Copyright 2020 DuBois & King Inc.

97 PARK STREET

SPRINGFIELD, VT 05156

TEL: (802) 591-4326

FAX: (866) 783-7101

www.dubois-king.com

EV CHARGING STATION DETAIL

AND CONCRETE PAD DETAILS

AutoCAD SHX Text

LEVEL 2 CHARGING STATION UNIT W/ 2 STATIONS EACH, TYPICAL.

AutoCAD SHX Text

SIDE VIEW

AutoCAD SHX Text

FRONT PLAN VIEW

AutoCAD SHX Text

PROVIDE MANUFACTURER'S CHARGING STATION SIGN PER OWNER APPROVAL

AutoCAD SHX Text

CB

AutoCAD SHX Text

SEE CONCRETE BASE DETAIL THIS SHEET

AutoCAD SHX Text

STUB CONDUIT 12" ABOVE TOC

AutoCAD SHX Text

3/4" CHAMFERED EDGE ALL-AROUND

AutoCAD SHX Text

BOLT CIRCLE PER MANUFACTURER

AutoCAD SHX Text

ANCHOR BOLTS PROVIDED W/ CHARGING STATION

AutoCAD SHX Text

TOC

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

ELEVATION

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

CONDUIT STUB-UP WITHIN THIS AREA

AutoCAD SHX Text

BOLLARD FOOTPRINT

AutoCAD SHX Text

CORD MANAGER FOOTPRINT

AutoCAD SHX Text

3/4" X 8'-0"LCOPPER WELD GROUND ROD

AutoCAD SHX Text

EXOTHERMIC WELD @ GROUND ROD

AutoCAD SHX Text

PLACE CONCRETE ON 12" CRUSHED WELL DRAINING STONE, COMPACTED TO 95% PROCTOR

AutoCAD SHX Text

TYPICAL CONDUITS. EXACT LOCATIONS TO BE COORDINATED W/ APPROVED CONFIGURATION.

AutoCAD SHX Text

#4 REINF. @ 12" EA WAY TOP AND BOTTOM

AutoCAD SHX Text

FRONT VIEW

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

PLACE CONCRETE ON 12" CRUSHED WELL DRAINING STONE, COMPACTED TO 95% PROCTOR

AutoCAD SHX Text

3/4" CHAMFERED EDGE ALL-AROUND

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

TYPICAL CONDUITS. EXACT LOCATIONS TO BE COORDINATED W/ APPROVED CONFIGURATION.

AutoCAD SHX Text

#4 REINF. @ 12" EA WAY TOP AND BOTTOM

AutoCAD SHX Text

OPENING/ WINDOW FOR CONDUIT ENTRANCE

AutoCAD SHX Text PROVIDE WINDOWS IN CONCRETE TO ALLOW FOR CONDUIT ENTRANCE (OPENINGS SHOWN DASHED). EXACT LOCATION AND SIZE DETERMINED BY APPROVED EQUIPMENT SIZE, TYPICAL.

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

PANELBOARD ENCLOSURE (WITH OPEN BOTTOM & 1-1/2" MOUNTING FLANGE)

AutoCAD SHX Text

PLACE CONCRETE ON 12" CRUSHED WELL DRAINING STONE, COMPACTED TO 95% PROCTOR

AutoCAD SHX Text

3/4" CHAMFERED EDGE ALL-AROUND

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

112.5 kVA DRY TYPE ENCLOSED TRANSFORMER

AutoCAD SHX Text

PLAN VIEW

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

PANELBOARD ENCLOSURE

AutoCAD SHX Text 2/0

AutoCAD SHX Text 2/0

AutoCAD SHX Text 2/0

AutoCAD SHX Text TRANSFORMER PRIMARY FUSED DISCONNECT SWITCH MOUNTED ONTO BACK (READ SIDE) OF PANELBOARD ENCLOSURE

AutoCAD SHX Text

OPENING/ WINDOW FOR CONDUIT ENTRANCE

AutoCAD SHX Text 2/0

AutoCAD SHX Text 2/0

AutoCAD SHX Text 2/0

AutoCAD SHX Text P

AutoCAD SHX Text

ELECTRIC PANEL

AutoCAD SHX Text

DOUBLE-DOOR W/ LOCKING PROVISION. MAINTAIN 3' CLEARANCE IN FRONT.

AutoCAD SHX Text 30KVA DRY TYPE XFMR (GREY LOT & ORANGE LOT) 112.5KVA DRY TYPE XFMR BLUE LOT AND GREEN LOT)

AutoCAD SHX Text

480V PRIMARY FROM PANEL SOURCE (SEE EV SITE PLANS FOR CONTINUATION)

AutoCAD SHX Text

PANELBOARD ENCLOSURE ANCHORED TO CONCRETE PAD W/ EXPANSION ANCHORS, TYPICAL.

AutoCAD SHX Text 2/0

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text

LOCATE CONCRETE BASE 1'-0" FROM EDGE OF PAVEMENT

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

PANELBOARD ENCLOSURE (WITH OPEN BOTTOM & 1-1/2" MOUNTING FLANGE)

AutoCAD SHX Text

FRONT

AutoCAD SHX Text 30kVA DRY TYPE ENCLOSED TRANSFORMER

AutoCAD SHX Text C:\Users\jlmiller\OneDrive - DOI\Desktop\EV Charging\EV Charging CAD files\ACAD-E0.3 Detail Series.dwg 6/9/2020 10:50 AM 6/9/2020 10:50 AM6/9/2020 10:50 AM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text U.S.

AutoCAD SHX Text

FISH & WILDLIFE

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

DE

AutoCAD SHX Text

PA

AutoCAD SHX Text

RT

AutoCAD SHX Text

ME

AutoCAD SHX Text

NT

AutoCAD SHX Text 0F

AutoCAD SHX Text

TH

AutoCAD SHX Text E

AutoCAD SHX Text

IN

AutoCAD SHX Text

TE

AutoCAD SHX Text

RI

AutoCAD SHX Text

OR

AutoCAD SHX Text

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text PAD-MOUNTED EQUIPMENT NOTES: 1. ENCLOSURES SHALL BE U.L. LISTED, NEMA 4X, STAINLESS STEEL ENCLOSURES SHALL BE U.L. LISTED, NEMA 4X, STAINLESS STEEL CONSTRUCTION WITH DRIP SHIELD AND LOCKING PROVISION. 2. CONDUIT TO BE MIN. 24" BELOW GRADE. CONDUIT TO BE MIN. 24" BELOW GRADE. 3. CONDUITS SHALL STUB UP THROUGH WINDOW IN CENTER OF SLAB OR CONDUITS SHALL STUB UP THROUGH WINDOW IN CENTER OF SLAB OR THROUGH A SLEEVE IN THE SLAB TO ALLOW CONDUIT MOVEMENT IN SLAB. 4. DO NOT RIGIDLY CONNECT UNDER GROUND CONDUIT AND ELECTRICAL DO NOT RIGIDLY CONNECT UNDER GROUND CONDUIT AND ELECTRICAL DEVICES. PROVIDE FLEXIBLE CONDUIT FROM DEVICE TO CONDUIT WITH ENOUGH SLACK OR SLIP FITTING TO ALLOW FOR SLAB MOVEMENT. 5. CONTRACTOR TO VERIFY AND COORDINATE APPROVED SHOP DRAWING SIZES CONTRACTOR TO VERIFY AND COORDINATE APPROVED SHOP DRAWING SIZES PRIOR TO PURCHASE OF EQUIPMENT SUPPLIED SO THAT IT WILL FIT INTO ENCLOSURES AND ON CONCRETE PAD. REQUIRED WORKING CLEARANCES SHALL BE MAINTAINED. ENCLOSURE SIZES MAY BE MODIFIED AS REQUIRED.

AutoCAD SHX Text GROUNDING WORK NOTES: 1. PROVIDE #2/0 AWG BARE COPPER GROUND GRID AT 2'-0" BELOW FINISHED PROVIDE #2/0 AWG BARE COPPER GROUND GRID AT 2'-0" BELOW FINISHED GRADE ALL-AROUND NEW EQUIPMENT PADS. BOND TO NEW TRANSFORMER GROUND GRID W/ CADWELD CONNECTIONS. INSTALL (4) 3/4" X 8' LONGCOPPERWELD GROUND RODS (GR) AT EACH CORNER OF NEW CONCRETE PAD AND WHERE INDICATED. EXTEND (1) #2/0 AWG TO PANEL ENCLOSURE, PANEL, DISCONNECT SWITCH AND TRANSFORMER PER NEC GROUND CONNECTION REQUIREMENTS.

AutoCAD SHX Text CONCRETE PAD NOTES: 1. PROVIDE COORDINATION LAYOUT PLAN OF APPROVED CONCRETE PAD. PROVIDE COORDINATION LAYOUT PLAN OF APPROVED CONCRETE PAD. EQUIPMENT ENCLOSURES, CONDUIT WINDOW OPENINGS IN CONCRETE SLAB, AND EQUIPMENT CLEARANCES FOR ENGINEER AND COTR REVIEW (MATCHING EQUIPMENT BEING FURNISHED).

AutoCAD SHX Text

AutoCAD SHX Text 2'

AutoCAD SHX Text 3'

AutoCAD SHX Text 1'

AutoCAD SHX Text

GRAPHIC SCALE: 3/4" = 1'-0"

AutoCAD SHX Text L2

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

TYPICAL LEVEL 2 CHARGING STATION

AutoCAD SHX Text

CB

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

TYPICAL LEVEL 2 CHARGING STATION CONCRETE BASE

AutoCAD SHX Text

CPG

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

CONCRETE PAD W/ TYPICAL GROUNDING & CONDUIT LAYOUT

AutoCAD SHX Text

CP1

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

CONCRETE PAD AT BLUE LOT & GREEN LOT

AutoCAD SHX Text

CP2

AutoCAD SHX Text

SCALE: 3/4" = 1'-0"

AutoCAD SHX Text

CONCRETE PAD AT GREY LOT & ORANGE LOT

AutoCAD SHX Text E0.3

AutoCAD SHX Text

SURFACE RESTORATION NOTES: 1. REFER TO DRAWING EO.2 FOR SURFACE RESTORATION NOTES.REFER TO DRAWING EO.2 FOR SURFACE RESTORATION NOTES.

97 PARK STREET

SPRINGFIELD, VT 05156

TEL: (802) 591-4326

FAX: (866) 783-7101

www.dubois-king.com

TRENCH SECTIONS AND

TYPICAL DETAILS

AutoCAD SHX Text C:\Users\jlmiller\OneDrive - DOI\Desktop\EV Charging\EV Charging CAD files\ACAD-E0.4 Detail Series.dwg 6/9/2020 10:53 AM 6/9/2020 10:53 AM6/9/2020 10:53 AM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text U.S.

AutoCAD SHX Text

FISH & WILDLIFE

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

DE

AutoCAD SHX Text

PA

AutoCAD SHX Text

RT

AutoCAD SHX Text

ME

AutoCAD SHX Text

NT

AutoCAD SHX Text 0F

AutoCAD SHX Text

TH

AutoCAD SHX Text E

AutoCAD SHX Text

IN

AutoCAD SHX Text

TE

AutoCAD SHX Text

RI

AutoCAD SHX Text

OR

AutoCAD SHX Text

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text LINK-SEAL TYPE WALL PENETRATION SEAL, LS-340 SERIES FOR CORE BIT DRILLED OR WS-8-32 W/LS-340 FOR WALL SLEEVE TYPE.

AutoCAD SHX Text

EXTERIOR FOUNDATION WALL

AutoCAD SHX Text

PITCH CONDUIT AWAY FROM FOUNDATION

AutoCAD SHX Text

COMPACTED TO 90% MODIFIED PROCTOR DENSITY

AutoCAD SHX Text TYPICAL ELECTRIC HANDHOLE W/ OPEN BOTTOM AND 'ELECTRIC' ON COVER. H2O RATED AND INSTALLED FLUSH W/ GRADE.

AutoCAD SHX Text

3500 PSI CONC. RING AROUND HANDHOLE (WHEN IN SIDEWALK ONLY).

AutoCAD SHX Text

6" CRUSHED STONE BASE

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

SLOPE TO BOX TYP.

AutoCAD SHX Text

PAVEMENT

AutoCAD SHX Text

CROSS COUNTRY

AutoCAD SHX Text

GRAVEL

AutoCAD SHX Text

SUBBASE

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

%%UTRENCH LIMITS

AutoCAD SHX Text

AutoCAD SHX Text

IN ROAD

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

LOAM AND SEED

AutoCAD SHX Text

MATCH

AutoCAD SHX Text 12"

AutoCAD SHX Text

24" MINIMUM

AutoCAD SHX Text

FINISHED

AutoCAD SHX Text

GRADE

AutoCAD SHX Text

NO ROCK SHALL PROJECT INSIDE OF TRENCH LIMITS

AutoCAD SHX Text

WARNING TAPE "CAUTION - ELECTRIC LINE BURIED BELOW"

AutoCAD SHX Text

CLEAN BACKFILL COMPACTED TO 90% MODIFIED PROCTOR DENSITY

AutoCAD SHX Text

3" CONCRETE ALL AROUND SEE NOTES BELOW

AutoCAD SHX Text

MINIMUM WIDTH TRENCH

AutoCAD SHX Text

6" SAND ALL-AROUND

AutoCAD SHX Text

(1) 2" C SCH 40 PVC CONDUIT FROM TRANSFORMER PRIMARY FUSED DISCONNECT SWITCH. REFER TO PLANS AND RISER DIAGRAMS FOR QUANTITY (VARIES PER SITE), TYPICAL.

AutoCAD SHX Text

PROVIDE 2/0 AWG GROUND LENGTH OF TRENCH. SEE NOTE 5.

AutoCAD SHX Text T1

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TYPICAL 480V PRIMARY TRENCH SECTION

AutoCAD SHX Text

LENGTH

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

DEPTH

AutoCAD SHX Text

AutoCAD SHX Text

HH IDENTIFICATION

AutoCAD SHX Text

HANDHOLE: HHA

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TYPICAL ELECTRIC HANDHOLE DETAIL

AutoCAD SHX Text

HH

AutoCAD SHX Text TYPICAL TRENCHING NOTES: 1. BOTTOM OF TRENCH SHALL BE UNDISTURBED ORIGINAL GROUND OR FIRMLY COMPACTED EARTH BOTTOM OF TRENCH SHALL BE UNDISTURBED ORIGINAL GROUND OR FIRMLY COMPACTED EARTH FREE FROM VOIDS, ROCK OR RUBBLE AND OF RELATIVELY SMOOTH ARCH, AND LINED WITH A MINIMUM OF 6 INCHES OF CLEAN SAND. 2. CONDUIT UNDER AREAS SUBJECT TO VEHICULAR TRAFFIC AND UTILITY CROSSINGS SHALL BE IN CONDUIT UNDER AREAS SUBJECT TO VEHICULAR TRAFFIC AND UTILITY CROSSINGS SHALL BE IN HDPE SLEEVE. SLEEVE SHALL EXTEND THREE (3') BEYOND EDGE OF PAVEMENT AND UTILITIES, TYPICAL. IN PARKING LOTS, SLEEVE SHALL EXTEND TO EDGE OF PAVEMENT. 3. CONCRETE SHALL BE PER SPECIFICATIONS. CONCRETE SHALL BE PER SPECIFICATIONS. 4. PVC CONDUIT SHALL BE PRIMED AND GLUED TO FORM A WATERTIGHT SEAL. IF HDPE PVC CONDUIT SHALL BE PRIMED AND GLUED TO FORM A WATERTIGHT SEAL. IF HDPE CONDUIT IS USED, UTILIZE APPROVED FITTINGS. 5. BOND GROUND TO BUILDING GROUND LOOP AND/OR CHARGING STATION.BOND GROUND TO BUILDING GROUND LOOP AND/OR CHARGING STATION.

AutoCAD SHX Text

PAVEMENT

AutoCAD SHX Text

CROSS COUNTRY

AutoCAD SHX Text

GRAVEL

AutoCAD SHX Text

SUBBASE

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

%%UTRENCH LIMITS

AutoCAD SHX Text

AutoCAD SHX Text

IN ROAD

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

LOAM AND SEED

AutoCAD SHX Text

MATCH

AutoCAD SHX Text 12"

AutoCAD SHX Text

24" MINIMUM

AutoCAD SHX Text

FINISHED

AutoCAD SHX Text

GRADE

AutoCAD SHX Text

NO ROCK SHALL PROJECT INSIDE OF TRENCH LIMITS

AutoCAD SHX Text

WARNING TAPE "CAUTION - ELECTRIC LINE BURIED BELOW"

AutoCAD SHX Text

CLEAN BACKFILL COMPACTED TO 90% MODIFIED PROCTOR DENSITY

AutoCAD SHX Text

3" CONCRETE ALL AROUND SEE NOTES BELOW

AutoCAD SHX Text

MINIMUM WIDTH TRENCH

AutoCAD SHX Text

6" SAND ALL-AROUND

AutoCAD SHX Text

(1) 1"C SCH 40 PVC CONDUIT TO EACH CHARGING STATION. REFER TO PLANS AND RISER DIAGRAMS FOR QUANTITY (VARIES PER SITE), TYPICAL.

AutoCAD SHX Text

PROVIDE 2/0 AWG GROUND LENGTH OF TRENCH. SEE NOTE 5.

AutoCAD SHX Text T

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TYPICAL TRENCH SECTION

AutoCAD SHX Text

LS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TYPICAL LINK SEAL DETAIL @ FOUNDATION

AutoCAD SHX Text

WIDTH

AutoCAD SHX Text

AutoCAD SHX Text

WATER PIPING IF AVAILABLE

AutoCAD SHX Text

1/0 BARE CU -1"C LIGHTNING PROTECTION PER NFPA 780 WHERE CALLED FOR.

AutoCAD SHX Text

GROUND RODS DRIVEN INTO EARTH.

AutoCAD SHX Text

CONCRETE ENCASED ELECTRODE #4 MIN. BARE CU

AutoCAD SHX Text

BUILDING GROUND RING #2 AWG MIN. BARE COPPER

AutoCAD SHX Text

METAL GAS PIPING

AutoCAD SHX Text

BUILDING STEEL

AutoCAD SHX Text

GROUND BUS

AutoCAD SHX Text

NEUTRAL PAD

AutoCAD SHX Text

BARE CU

AutoCAD SHX Text

BARE CU

AutoCAD SHX Text

BARE CU

AutoCAD SHX Text

BARE CU

AutoCAD SHX Text

%%UINTERIOR

AutoCAD SHX Text

%%UEXTERIOR

AutoCAD SHX Text

CONDUIT CLAMP (TYPICAL)

AutoCAD SHX Text

SLIP FITTING

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

FINISHED FLOOR

AutoCAD SHX Text

LB FITTING

AutoCAD SHX Text

SEAL ALL WALL PENETRATIONS WATERTIGHT

AutoCAD SHX Text

TYPICAL PVC TO RGS ADAPTER

AutoCAD SHX Text

TYPICAL PANELBOARD (REFER TO PLANS)

AutoCAD SHX Text PROVIDE 3-POLE OR 2-POLE OVERCURRENT DEVICE PER MANUFACTURER'S REQUIREMENTS. MATCH PANEL TYPE, STYLE AND AMPS INTERRUPTING RATING (AIC).

AutoCAD SHX Text SURGE PROTECTION DEVICE (SPD) OR TVSS (TRANSIENT VOLTAGE SURGE SUPPRESSOR). SEE SPECIFICATIONS.

AutoCAD SHX Text

SPD OR TVSS

AutoCAD SHX Text NOTES: 1. GROUNDING ELECTRODE & BONDING CONDUCTORS WHEN AVAILABLE GROUNDING ELECTRODE & BONDING CONDUCTORS WHEN AVAILABLE PER ARTICLE 250 OF N.E.C. 2. GROUNDING CONDUCTOR SIZES PER DRAWINGS AND NEC ARTICLE GROUNDING CONDUCTOR SIZES PER DRAWINGS AND NEC ARTICLE 250. 3. ALL CONNECTIONS SHALL BE EXOTHERMIC TYPE (CADWELD, BURNDY ALL CONNECTIONS SHALL BE EXOTHERMIC TYPE (CADWELD, BURNDY OR ALLTEC).

AutoCAD SHX Text NOTES: 1. LINK-SEAL TYPE (OR APPROVED EQUAL) SEALING FITTING SHALL BE USED FOR ALL WALL PENETRATIONS. IF LINK-SEAL TYPE (OR APPROVED EQUAL) SEALING FITTING SHALL BE USED FOR ALL WALL PENETRATIONS. IF CORE BIT DRILLED SYSTEM IS USED AND CORE DRILL IS SMOOTH AND SUITABLE THE MODULE SEALING SYSTEM MAY BE USED. 2. SLOPE DUCTS AWAY FROM FOUNDATION (TO DRAIN).SLOPE DUCTS AWAY FROM FOUNDATION (TO DRAIN).

AutoCAD SHX Text

EG

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

ELECTRODE GROUNDING DETAIL

AutoCAD SHX Text

TW

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TYPICAL THRU-WALL SEAL REQUIREMNET DETAIL

AutoCAD SHX Text

SP

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

SURGE PROTECTION DETAIL

AutoCAD SHX Text E0.4

AutoCAD SHX Text

AutoCAD SHX Text

CONDUIT SEE RISER DIAGRAM FOR SIZE (TYPICAL)

AutoCAD SHX Text

PAVEMENT

AutoCAD SHX Text

CROSS COUNTRY

AutoCAD SHX Text

GRAVEL

AutoCAD SHX Text

SUBBASE

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

%%UTRENCH LIMITS

AutoCAD SHX Text

AutoCAD SHX Text

IN ROAD

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

MATCH

AutoCAD SHX Text 12"

AutoCAD SHX Text

36" TO TOP OF SLEEVE

AutoCAD SHX Text

NO ROCK SHALL PROJECT INSIDE OF TRENCH LIMITS

AutoCAD SHX Text

WARNING TAPE "CAUTION - ELECTRIC LINE BURIED BELOW"

AutoCAD SHX Text

CLEAN BACKFILL COMPACTED TO 90% MODIFIED PROCTOR DENSITY

AutoCAD SHX Text

MINIMUM WIDTH TRENCH

AutoCAD SHX Text

EXISTING MATERIAL

AutoCAD SHX Text 2", 6" OR 8" DHPE SLEEVE @36" TO TOP OF SLEEVE. TYPICAL AT ROAD, DRIVE AND WALKWAYS. ROUTE 1"C SCH 40 PVC CONDUIT THRU SLEEVE(S) AND ON TO EACH CHARGING STATION. REFER TO EV SITE PLANS AND RISER DIAGRAMS FOR SIZE AND QUANTITY (VARIES PER SITE), TYPICAL.

AutoCAD SHX Text

PROVIDE 2/0 AWG GROUND LENGTH OF SLEEVE. SEE NOTE 5.

AutoCAD SHX Text

TS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

TYPICAL TRENCH SECTION - IN ROAD/PAVED PARKING LOT

HANDHOLE: HHB

GREEN LOT

BLUE LOT

ALDO

LEOPOLD

LODGE

PROFESSIONAL SEAL

© Copyright 2020 DuBois & King Inc.

97 PARK STREET

SPRINGFIELD, VT 05156

TEL: (802) 591-4326

FAX: (866) 783-7101

www.dubois-king.com

BLUE LOT AND GREEN LOT EV

SITE PLAN AND

ELECTRICAL RISER DIAGRAM

KEY MAP

AutoCAD SHX Text E0.3

AutoCAD SHX Text L2

AutoCAD SHX Text

FRONT PANEL ENCLOSURE

AutoCAD SHX Text 'HDD' DENOTES HORIZONTAL DIRECTIONAL DRILLING, TYPICAL AT (2) LOCATIONS SHOWN. SEE KEY NOTE 5.

AutoCAD SHX Text E0.3

AutoCAD SHX Text

CPG

AutoCAD SHX Text

REFER TO DETAILS FOR CONCRETE PAD, EQUIPMENT, GROUNDING AND CONDUIT LAYOUT.

AutoCAD SHX Text E0.4

AutoCAD SHX Text T2

AutoCAD SHX Text

SEE HANDHOLE DETAIL, TYP.

AutoCAD SHX Text E0.4

AutoCAD SHX Text

HH

AutoCAD SHX Text

CONCRETE PAVER AREA

AutoCAD SHX Text

HHB (2)

AutoCAD SHX Text

HDD

AutoCAD SHX Text

HHB (3)

AutoCAD SHX Text

HHB (1)

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text EXISTING PAVED TRAIL. INSTALL CONDUIT 24" UNDER TOP OF ASPHALT. HAND DIG AS TO NOT DISTURB ASPHALT.

AutoCAD SHX Text

HDD

AutoCAD SHX Text E0.3

AutoCAD SHX Text

CP1

AutoCAD SHX Text C:\Users\jlmiller\OneDrive - DOI\Desktop\EV Charging\EV Charging CAD files\ACAD-E1.3 Blue Lot.dwg 6/9/2020 10:58 AM 6/9/2020 10:58 AM6/9/2020 10:58 AM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text U.S.

AutoCAD SHX Text

FISH & WILDLIFE

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

DE

AutoCAD SHX Text

PA

AutoCAD SHX Text

RT

AutoCAD SHX Text

ME

AutoCAD SHX Text

NT

AutoCAD SHX Text 0F

AutoCAD SHX Text

TH

AutoCAD SHX Text E

AutoCAD SHX Text

IN

AutoCAD SHX Text

TE

AutoCAD SHX Text

RI

AutoCAD SHX Text

OR

AutoCAD SHX Text

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text

AutoCAD SHX Text 40'

AutoCAD SHX Text 80'

AutoCAD SHX Text

GRAPHIC SCALE 1" = 40'-0"

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

BLUE LOT AND GREEN LOT ELECTRICAL RISER DIAGRAM

AutoCAD SHX Text

PANELBOARD ENCLOSURE

AutoCAD SHX Text

PANEL 'EV BG'. REFER TO DRAWING E2.0 FOR PANEL SCHEDULE.

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E0.3

AutoCAD SHX Text L2

AutoCAD SHX Text

REFER TO DETAIL 'L2' FOR TYPICAL LEVEL 2 EV CHARGING STATION

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text PAD-MOUNTED DRY-TYPE NON-VENTILATED, NEMA 4X 112.5kVA TRANSFORMER (135 FLC) 480V-208Y/120V, 3-PHASE, 4 WIRE

AutoCAD SHX Text FUSED DISCONNECT SWITCH, 200A, 600V, HEAVY-DUTY, NEMA 4X W/ LOCKING PROVISIONS (FUSED AT 175A).

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text BLUE LOT (6) LEVEL 2 CHARGING STATION UNITS FOR A TOTAL OF (12) CHARGING STATIONS

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1" = 40'-0"

AutoCAD SHX Text

BLUE LOT AND GREEN LOT EV SITE PLAN

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

EXISTING ELECTRICAL PANEL

AutoCAD SHX Text

BASEMENT LEVEL

AutoCAD SHX Text GREEN LOT (3) LEVEL 2 CHARGING STATION UNITS FOR A TOTAL OF (6) CHARGING STATIONS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

EQUIPMENT PAD - ISOMETRIC VIEWS

AutoCAD SHX Text

AutoCAD SHX Text

%%UVIEW FROM ROOSEVELT ROAD

AutoCAD SHX Text

%%UVIEW FROM GREEN LOT

AutoCAD SHX Text

DORM ROOM

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

ELECTRICAL ROOM

AutoCAD SHX Text

EXISTING FINISHED CEILING

AutoCAD SHX Text

ROUTE CONDUIT IN INTERSTITIAL SPACE ABOVE FINISHED CEILING TO ELEC ROOM.

AutoCAD SHX Text

EXISTING SPARE CIRCUIT 8, 200A, 3P

AutoCAD SHX Text

LB FITTING

AutoCAD SHX Text

ALDO LEOPOLD LODGE

AutoCAD SHX Text

ABOVE GRADE CONDUITS SHALL BE RGS

AutoCAD SHX Text

PVC TO RGS ADAPTOR, TYPICAL.

AutoCAD SHX Text

FRONT ACCESS OF PANELBOARD ENCLOSURE W/ DOUBLE-DOORS AND LOCKING PROVISION

AutoCAD SHX Text

DISCONNECT SWITCH MOUNTED ON REAR OF PANEL ENCLOSURE

AutoCAD SHX Text FRONT ACCESS 112.5 kVA DRY-TYPE TRANSFORMER

AutoCAD SHX Text

112.5 kVA DRY-TYPE TRANSFORMER

AutoCAD SHX Text E0.3

AutoCAD SHX Text

CP1

AutoCAD SHX Text

REFER TO DETAILS FOR CONCRETE PAD, EQUIPMENT, GROUNDING AND CONDUIT LAYOUTS

AutoCAD SHX Text E0.3

AutoCAD SHX Text G

AutoCAD SHX Text

HDD

AutoCAD SHX Text E1.1

AutoCAD SHX Text

AutoCAD SHX Text

PVC TO RGS ADAPTOR, TYPICAL.

AutoCAD SHX Text

SUPPORT CONDUIT TO BUILDING UTILIZING AN APPROVED METHOD

AutoCAD SHX Text

REFER TO REQUIRED SEAL AT THRU-WALL PENETRATION DETAIL

AutoCAD SHX Text

USE RGS CONDUIT ABOVE GRADE, TYPICAL.

AutoCAD SHX Text

TW

AutoCAD SHX Text E0.4

AutoCAD SHX Text

CONDUIT AND FITTINGS TO BE PAINTED TO MATCH.

AutoCAD SHX Text

PANEL 'EV BG'

AutoCAD SHX Text

6"X6" WIREWAY

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

HHB (1)

AutoCAD SHX Text

HHB (2)

AutoCAD SHX Text

HHB (3)

AutoCAD SHX Text

AutoCAD SHX Text KEY NOTES FOR BLUE LOT AND GREEN LOT: : ROUTE FEEDER CONDUIT ABOVE EXISTING CEILINGS. THE EXISTING CEILINGS ARE GBW (MATCH EXISTING) AND SHALL BE CAREFULLY CUT, PATCHED AND REPAIRED AFTER CONDUIT INSTALLATION. CEILINGS SHALL BE FULLY PATCHED AND PAINTED (EDGE TO EDGE OF DISTURBED SURFACE. MATCH EXISTING PAINT FINISH. . MATCH EXISTING PAINT FINISH. WHERE CONDUITS PASS THROUGH EXISTING WALL ASSEMBLIES WALLS SHALL BE PATCHED AND FIRE CAULKED. CONDUITS SHALL BE FIRMLY ATTACHED TO EXISTING STRUCTURE (REFER TO SPECIFICATIONS). EXISTING SPARE CIRCUIT 8 (SQUARE D KA36200) - 200 AMP, THREE POLE BREAKER IN PANEL H1-MD SHALL BE USED FOR THE FEEDER SERVING THE NEW TRANSFORMER FOR THE EV CHARGING STATIONS. PROVIDE NEW TYPE WRITTEN DIRECTORY CARD AND NEW NAMEPLATE TO INCLUDE 'EV CHARGING STATIONS BLUE & GREEN LOTS'. PROVIDE HORIZONTAL DIRECTIONAL DRILLING ('HDD') WHERE FEEDER IS INSTALLED UNDER ROAD OR DRIVE AND PROVIDE 6" DIAMETER HDPE SLEEVE EXTENDING 3' BEYOND EDGE OF PAVEMENT AS SHOWN. TOP OF SLEEVE SHALL BE INSTALLED 36" BELOW TOP OF PAVEMENT. FIELD VERIFY ALL LENGTH(S) REQUIRED (TYPICAL) AND REFER TO SPECIFICATION SECTION 330521 FOR HORIZONTAL DIRECTIONAL DRILLING.

AutoCAD SHX Text

REFER TO KEY NOTE FOR HORIZONTAL DIRECTIONAL DRILLING WORK.

AutoCAD SHX Text

HDD

AutoCAD SHX Text

HDD

AutoCAD SHX Text

BLUE LOT

AutoCAD SHX Text

GREEN LOT

AutoCAD SHX Text

ALDO LEOPOLD LODGE

AutoCAD SHX Text

CAP SPARE CONDUIT AT HANDHOLE

SURFACE RESTORATION NOTES: 1. REFER TO DRAWING EO.2 FOR SURFACE RESTORATION NOTES.REFER TO DRAWING EO.2 FOR SURFACE RESTORATION NOTES.

97 PARK STREET

SPRINGFIELD, VT 05156

TEL: (802) 591-4326

FAX: (866) 783-7101

www.dubois-king.com

PANEL SCHEDULES

7 7

.1

AutoCAD SHX Text I:\5\525972 USFWS NCTC Lighting Controls & EVCS\Drawings\Electrical\E2.0 Panel Schedules.dwg 3/23/2020 4:24 PM 3/23/2020 4:24 PM3/23/2020 4:24 PM

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

BY:

AutoCAD SHX Text

REVISIONS:

AutoCAD SHX Text

SURVEYED:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DRWG. NO:

AutoCAD SHX Text

SUBMITTED:

AutoCAD SHX Text

REVIEWED:

AutoCAD SHX Text

RECOMMENDED:

AutoCAD SHX Text

FISH AND WILDLIFE SERVICE

AutoCAD SHX Text

UNITED STATES DEPARTMENT OF THE INTERIOR

AutoCAD SHX Text

FEDERAL CONTRACT NO. F17PC00091

AutoCAD SHX Text

W.O. APPROVAL: DATE:

AutoCAD SHX Text

ASST. REGIONAL DIRECTOR

AutoCAD SHX Text

REGIONAL ENGINEER

AutoCAD SHX Text No.

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CERTIFIED:

AutoCAD SHX Text

10 CFR 435 COMPLIANCE

AutoCAD SHX Text

RFK

AutoCAD SHX Text

SRM

AutoCAD SHX Text 03-27-2020

AutoCAD SHX Text U.S.

AutoCAD SHX Text

FISH & WILDLIFE

AutoCAD SHX Text

SERVICE

AutoCAD SHX Text

DE

AutoCAD SHX Text

PA

AutoCAD SHX Text

RT

AutoCAD SHX Text

ME

AutoCAD SHX Text

NT

AutoCAD SHX Text 0F

AutoCAD SHX Text

TH

AutoCAD SHX Text E

AutoCAD SHX Text

IN

AutoCAD SHX Text

TE

AutoCAD SHX Text

RI

AutoCAD SHX Text

OR

AutoCAD SHX Text

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER

AutoCAD SHX Text

698 CONSERVATION WAY SHEPHERDSTOWN, WV, 25443

AutoCAD SHX Text

NATIONAL CONSERVATION TRAINING CENTER EV CHARGING STATIONS FED. NO. F17PC00091

AutoCAD SHX Text E2.0

AutoCAD SHX Text

PANELBOARD NOTES: 1. COORDINATE LAYOUT AND INSTALLATION OF PANELBOARDS AND COMPONENTS WITH THE COORDINATE LAYOUT AND INSTALLATION OF PANELBOARDS AND COMPONENTS WITH THE ENCLOSURES INDICATED ON THE DRAWINGS AND OTHER CONSTRUCTION, INCLUDING ELECTRICAL AND OTHER TYPES OF EQUIPMENT, RACEWAYS, AND ENCUMBRANCES TO WORKSPACE CLEARANCE REQUIREMENTS. 2. HINGED FRONT COVER: ENTIRE FRONT TRIM HINGED TO BOX AND WITH STANDARD DOOR WITHIN HINGED FRONT COVER: ENTIRE FRONT TRIM HINGED TO BOX AND WITH STANDARD DOOR WITHIN HINGED TRIM COVER. 3. DIRECTORY CARD: COMPLETELY FILLED OUT WITH LOADS AND IDENTIFICATION OF EQUIPMENT BEING DIRECTORY CARD: COMPLETELY FILLED OUT WITH LOADS AND IDENTIFICATION OF EQUIPMENT BEING SERVED, PROVIDE TRANSPARENT PROTECTIVE COVER, MOUNTED IN METAL FRAME, INSIDE PANELBOARD DOOR.