Attachment B-230711_OYA_REGIONAL GENERATOR REPLACEMENT_CONSTRUCTION DOCUMENTS_COMBINED DRAWINGS_REDUCED.pdf

PDF 9 MB Posted Nov 13, 2023

Attached to: OYA Regional Generator Replacement
Solicitation number: S-DASOBO-00008606
Issued by: Harney County, Jackson County, Lake County, Gladstone City, Amity City, Oregon

About this file

Written by GovTribe AI · Apr 3, 2024

This is an Invitation to Bid (ITB) for the OYA Regional Generator Replacement project, issued by the Oregon Youth Authority (OYA). The purpose of this ITB is to solicit bids for the removal and replacement of generators at three OYA youth correctional facilities: the Rogue Valley Youth Correctional Facility in Grants Pass, the Eastern Oregon Youth Correctional Facility in Burns, and the Oak Creek Youth Correctional Facility in Albany. The project covers all work associated with this generator replacement, including the installation of new generators, muffler assemblies, and operable wall louvers. The ITB provides details on the project scope, site locations, and construction documents. No specific quantities or response deadlines are provided, but the contract term and any renewal options are not stated.

The ITB does not include pricing terms, set-asides, incumbent information, funding sources, or other financial details. It focuses on the technical requirements of the generator replacement work and the necessary steps for contractors to access and secure the work areas during construction while maintaining the facilities' security protocols. The document also outlines the demolition and construction general notes that the selected contractor must follow.

View the file

Other files

File	Type	Posted
Attachment A-REGIONAL GENERATOR REPLACEMENT CONSTRUCTION DOCUMENTS SPECS.pdf	PDF	Nov 13, 2023
Intent to Award - ATK.pdf	PDF	Nov 13, 2023
REQ-DASOBO-00039455_Approved.pdf	PDF	Nov 13, 2023
Binder1.pdf	PDF	Nov 13, 2023
Addendum 1 S-DASOBO-00008606 (OYA Regional Generator Replacement).pdf	PDF	Nov 13, 2023
Addendum 2 S-DASOBO-00008606 (OYA Regional Generator Replacement)_DOJ approved_for posting1.pdf	PDF	Nov 13, 2023
Prebid Conf Attendee List.pdf	PDF	Nov 13, 2023
S-DASOBO-00008606 ITB OYA Reg Generators_Final.v2.pdf	PDF	Nov 13, 2023

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

OYA REGIONAL GENERATOR REPLACEMENT

OREGON YOUTH CORRECTIONAL FACILITIES

ALTERNATE NO. 1

OAK CREEK YOUTH CORRECTIONAL FACILITY (OCYCF) (OC)

4400 LOCHNER ROAD SE

ALBANY, OR 97322

CONSTRUCTION DOCUMENTS

INDEX OF DRAWINGS

JULY 11, 2023

BASE BID

ROGUE VALLEY YOUTH CORRECTIONAL FACILITY (RVYCF) (RV)

2001 NE F STREET

GRANTS PASS, OR 97526-4813

BASE BID

EASTERN OREGON YOUTH CORRECTIONAL FACILITY (EOYCF) (EO)

1800 WEST MONROE

BURNS, OR 97720

OWNER'S REPRESENTATIVE

OREGON YOUTH AUTHORITY

530 CENTER STREET

SALEM, OR 97301-3777

(503) 354-4058

STACY DAVIS

STACY.M.DAVIS@OYA.OREGON.GOV

OWNER'S FIELD REPRESENTATIVE

OREGON YOUTH AUTHORITY

530 CENTER STREET

SALEM, OR 97301-3777

(503) 986-6740

MEL JOHNSTON (OC & EO)

MEL.JOHNSTON@OYA.OREGON.GOV

HARA MILLER (RV)

HARA.MILLER@OYA.OREGON.GOV

ARCHITECTURE

DLR GROUP

110 SW YAMHILL STREET

PORTLAND, OR 87204

(503)-200-3303

KENT LARSON

KLARSON@DLRGROUP.COM

STRUCTURAL

DLR GROUP

110 SW YAMHILL STREET

PORTLAND, OR 87204

(503) 274-2675

JUSTIN LYONS

JLYONS@DLRGROUP.COM

MECHANICAL

DLR GROUP

110 SW YAMHILL STREET

PORTLAND, OR 87204

(503) 575-3441

KEITH MILLER

KMILLER@DLRGROUP.COM

ELECTRICAL

DLR GROUP

110 SW YAMHILL STREET

PORTLAND, OR 87204

(541)-510-6019

EVAN STEWART

ESTEWART@DLRGROUP.COM

EASTERN OREGON YOUTH CORRECTIONAL FACILITY

ATE

E-W AXIS E-W AXIS

OAK CREEK YOUTH CORRECTIONAL FACILITY

PRIVATE ROAD

H N

E R

R O

A D

S E

GRIFFIN BROS, INC.

OZONE WINDOW FILMS

41ST AVE SE

NE F. STREET

ROGUE VALLEY YOUTH CORRECTIONAL FACILITY

JOSEPHINE COUNTY SHERRIF'S OFFICE

L R

G ro u p

REVISIONS

A B C D E F

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

COVER SHEET

G0.1

O R

E G

O N

Y O

U T

H A

U T

H O

Y C

E N

T E

R S

T R

E E

T S

A L E

M O

-3

O Y

A R

E G

A L

G E

N E

R A

T O

R R

E P

L A

C E

M E

N T

O A

K C

R E

E K

O G

U E

V A

L L

E Y

A S

T E

R N

O R

E G

O N

Y O

U T

H C

O R

R E

C T

A L

F A

.ARCHITECTURAL.

A0.1RV ROGUE VALLEY - ORIENTATION & CODE PLANS

A1.1RV ROGUE VALLEY - FLOOR PLANS & ELEVATIONS

A1.4RV ROGUE VALLEY - SECTION & EXTERIOR DETAILS

A2.1RV ROGUE VALLEY - REFLECTED CEILING PLANS

A3.1RV ROGUE VALLEY - ROOF PLANS

A0.1OC OAK CREEK - ORIENTATION & CODE PLANS

A1.1OC OAK CREEK - FLOOR PLANS & ELEVATIONS

A1.4OC OAK CREEK - SECTION & EXTERIOR DETAILS

A2.1OC OAK CREEK - REFLECTED CEILING PLANS

A3.1OC OAK CREEK - ROOF PLANS

A0.1EO EASTERN OREGON - ORIENTATION & CODE PLANS

A1.1EO EASTERN OREGON - FLOOR PANS & ELEVATIONS

A1.4EO EASTERN OREGON - SECTION & EXTERIOR DETAILS

A2.1EO EASTERN OREGON - REFELCTED CEILING PLANS

A3.1EO EASTERN OREGON - ROOF PLANS

A9.1 SHARED DETAILS

.GENERAL.

G0.1 COVER SHEET

G1.1 GENERAL NOTES, SYMBOLS AND ABBREVIATIONS

.MECHANICAL.

M0.1 MECHANICAL SYMBOLS, ABBREVIATIONS & NOTES

M1.1EO MECHANICAL PLAN - EASTERN OREGON

M1.1OC MECHANICAL PLAN - OAK CREEK

M1.1RV MECHANICAL PLAN - ROGUE VALLEY

M7.1 MECHANICAL DETAILS

.ELECTRICAL.

E0.1 ELECTRICAL SYMBOLS, ABBREVIATIONS & NOTES

E0.2 BASIS OF DESIGN

E4.1 POWER PLAN - GENERATOR ROOM - OAK CREEK

E4.2 POWER PLAN - GENERATOR ROOM - EASTERN OREGON

E4.3 POWER PLAN - GENERATOR ROOM - ROGUE VALLEY

E4.4 LIGHTING PLAN - GENERATOR ROOM - OAK CREEK

E4.5 LIGHTING PLAN - GENERATOR ROOM - EASTERN OREGON

E4.6 LIGHTING PLAN - GENERATOR ROOM - ROGUE VALLEY

E5.1 ELECTRICAL DIAGRAMS - OAK CREEK

E5.2 ELECTRICAL DIAGRAMS - EASTERN OREGON

E5.3 ELECTRICAL DIAGRAMS - ROGUE VALLEY

E6.1 ELECTRICAL DETAILS

VICINITY MAPVICINITY MAP VICINITY MAP

DEFERRED SUBMITTALS:

• SPECIFICATION SECTION 055000 - COLD-FORMED METAL FRAMING

• SPECIFICATION SECTION 078413 - PENETRATION FIRESTOPPING

• SPECIFICATION SECTION 089116 - OPERABLE WALL LOUVERS

• SPECIFICATION SECTION 260548 - VIBRATION AND SEISMIC CONTROLS

FOR ELECTRICAL SYSTEMS

REVISIONS

07/11/2023

CD OWNER

REVIEW

CONSTRUCTION

DOCUMENTS

O Y

A R

E G

A L

G E

N E

R A

T O

R R

E P

L A

C E

M E

N T

R E

N A

L Y

O U

T H

C O

R R

E C

N A

L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y A

D D

R E

S S

V A

S F

R O

M S

T O

GENERAL SYMBOLS

SIM

ROOM NAME

XXX-XX

DETAIL NUMBER

SHEET NUMBER

CROSS REFERENCE

WALL SECTION

SIMILAR OR TYPICAL

REFERENCE

DETAIL REFERENCE

BUILDING SECTION

SHEET NOTE

COLUMN GRID LINE

ROOM NUMBER/NAME

REVISION NUMBER

EARTH

GRAVEL

SAND

CONCRETE

PRECAST CONCRETE

STEEL

STONE

CONCRETE MASONRY UNIT

BRICK VENEER

LEVEL XX

XXX'-XX"

LEVEL ELEVATION

GYM FLOOR

WOOD

(CONTINUOUS BLOCKING)

WOOD

(NON-CONTINUOUS BLOCKING)

WOOD (TRIM/FINISH)

GLASS

SHINGLES

PLYWOOD (LARGE SCALE)

GYPSUM WALL BOARD

BLANKET INSULATION

RIGID INSULATION

SPRAY FOAM INSULATION

MINERAL WOOL INSULATION

PROTECTION BOARD

CARPET (LARGE SCALE)

ACOUSTIC TILE (LARGE SCALE)

TILE (LARGE SCALE)

REFERENCE KEYNOTE

XX A4.XX BUILDING ELEVATION

A12.X

XX XX

INTERIOR ELEVATION

100'-0"

TYP FF EL=

100'-0"

FINISH FLOOR

ELEVATION

SPOT ELEVATION

XARCHITECTURAL SYMBOLS

XX/ A11.X

XX. X. XX

CASEWORK ELEVATION

DOOR NUMBER

EXTERIOR WINDOW /

CURTAIN WALL NUMBER

WALL TYPE

A110

A124

XX/ A11.X XXXX

APC-1

9' - 0"

CEILING TYPE

CEILING HEIGHT

CEILING TYPE

INTERIOR WINDOW

NUMBER

GENERAL ARCHITECTURAL NOTES

1. FURNISH AND INSTALL FIRE-TREATED WOOD BLOCKING OR

METAL BACKING PLATE IN METAL STUD PARTITIONS FOR THE

PROPER ANCHORAGE OF ALL WALL ATTACHED ITEMS; I.E.

TOILET ACCESSORIES, CASEWORK, MILLWORK, WALL-

MOUNTED FIXTURES, MARKER BOARDS, TACK BOARDS, DOOR

STOPS, AUDIO VISUAL BRACKETS, AND OTHER WALL ATTACHED

ITEMS.

2. SCRIBE GYPSUM WALL BOARD OF WALLS AND PARTITIONS TO

IRREGULARITIES OF DECK ABOVE. SEAL TIGHTLY AROUND ALL

PENETRATIONS.

DEMOLITION GENERAL NOTES

THE CONTRACTOR SHALL:

A. COORDINATE ALL DEMOLITION AND PHASING EFFORTS WITH THE

OWNER’S REPRESENTATIVE. EVERY EFFORT SHALL BE MADE TO

MINIMIZE DISRUPTION OF OWNER’S OPERATIONS. EXCESSIVE

NOISE OR VIBRATION SHALL BE PRE-APPROVED AND

COORDINATED WITH THE OWNER’S REPRESENTATIVE. IN ALL

CASES, PROVISIONS SHALL BE MADE FOR USER’S SAFETY.

B. COORDINATE ANY DISRUPTION OF UTILITY SERVICES WITH THE

OWNER AND AS SPECIFIED.

C. CONSTRUCT TEMPORARY CONSTRUCTION PARTITIONS WITHIN

THE EXISTING BUILDING WHICH OFFER A ONE-HOUR ENCLOSURE

TO ISOLATE ANY DEMOLITION/CONSTRUCTION WORK FROM THE

GENERAL PUBLIC AND AS DEEMED NECESSARY BY THE OWNER

AND CODE OFFICIAL HAVING JURISDICTION. COORDINATE

LOCATIONS WITH THE OWNER AND MAINTAIN MEANS OF EGRESS

THROUGHOUT THE WORK.

D. MAINTAIN A SECURE, WEATHER-TIGHT ENCLOSURE AT ALL

TIMES.

E. VERIFY ALL EXISTING CONDITIONS, DIMENSIONS AND

ELEVATIONS AND NOTIFY THE ARCHITECT OF ANY

DISCREPANCIES.

F. REMOVE IN THEIR ENTIRETY ALL ITEMS, AS REQUIRED TO

EXECUTE THE DEMOLITION/CONSTRUCTION WORK DESCRIBED

BY THE DRAWINGS.

G. THE OWNER SHALL RESERVE THE RIGHT TO SALVAGE ANY

MATERIALS.

H. PROVIDE PROTECTION FOR ALL EXISTING BUILDING MATERIALS

AND EQUIPMENT FROM DAMAGE DUE TO ANY DEMOLITION OR

CONSTRUCTION-RELATED INCIDENT PERFORMED UNDER THIS

CONTRACT.

I. REPAIR OR REPLACE ITEMS THAT ARE DAMAGED AS A RESULT

OF DEMOLITION OR CONSTRUCTION TO MATCH EXISTING FINISH

AND/OR CONDITION.

J. EXISTING MATERIALS SHALL NOT BE REUSED UNLESS NOTED

OTHERWISE OR AS AUTHORIZED BY ARCHITECT.

K. VERIFY AND MAINTAIN THE LOCATION OF EXISTING POWER,

COMMUNICATION AND DATA CABLES TO PREVENT

INTERRUPTION OF THEIR SERVICE.

L. PATCH FLOOR, WALL AND CEILING PENETRATIONS RESULTING

FROM REMOVAL OR RE-ROUTING OF NEW OR EXISTING PIPING,

DUCTWORK, CONDUIT, AND OTHER ITEMS, AS REQUIRED TO

MAINTAIN FIRE-RESISTANCE-RATED SEPARATIONS. FINISH AS

REQUIRED FOR NEW OR EXISTING ADJACENT SURFACES.

M. CAP ALL DISCONNECTED MECHANICAL PIPING LINES WITHIN THE

WALL OR FLOOR. PATCH AND FINISH AS REQUIRED TO MATCH

NEW OR EXISTING ADJACENT SURFACES.

N. SEE MECHANICAL AND ELECTRICAL DRAWINGS AND NOTES FOR

FURTHER SEQUENCING AND SCOPE OF WORK.

O. WHERE PLASTER/STUD WALLS ARE INDICATED TO BE REMOVED,

PREPARE ADJACENT WALLS TO RECEIVE NEW PATCH/FINISH BY

SAWCUTTING ADJACENT PLASTER FINISH A MINIMUM OF 1'-0"

BEYOND DEMOLITION.

DEMOLITION NOTES APPLY TO ALL DEMOLITION SHEETS.

SECURITY & FIRE WALL LEGEND

SW2: SECONDARY SECURITY WALLS

(Restraint/Staff Protection)

SW1: PRIMARY SECURITY WALLS

(Glass / Mech / Hardware / Movement Doors)

FB2: 2-HOUR OCCUPANCY

FIRE SEPARATION WALL

FB1: 1-HOUR OCCUPANCY

FIRE SEPARATION WALL

SW3: TERTIARY SECURITY WALLS

L R

G ro u p

REVISIONS

A B C D E F

O Y

A R

E G

A L

G E

N E

R A

T O

R R

E P

L A

C E

M E

N T

R E

N A

L Y

O U

T H

C O

R R

E C

N A

L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y A

D D

R E

S S

V A

S F

R O

M S

T O

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

GENERAL NOTES,

SYMBOLS AND

ABBREVIATIONS

G1.1

GENERAL ABBREVIATIONS

# NUMBER

& AND

@ AT

ADA AMERICANS WITH DISABILITY ACT

ADDN ADDITION OR ADDITIONAL

AFF ABOVE FINISHED FLOOR

AFG ABOVE FINISHED GRADE

AHJ AUTHORITY HAVING JURISDICTION

ALT ALTERNATE

ANSI AMERICAN NATIONAL STANDARDS INSTITUTE

APPROX APPROXIMATE

ARCH ARCHITECTURAL

BLDG BUILDING

BSMT BASEMENT

CL CENTER LINE

CLG CEILING

CM CENTIMETER

CONC CONCRETE

CONN(S) CONNECTION(S)

CONST CONSTRUCTION

CONT CONTINUOUS

CONTR CONTRACT(OR)

CTR CENTER

D DEPTH

DEG DEGREE

DEMO DEMOLISH OR DEMOLITION

DIA DIAMETER

DIM DIMENSION

DIV SPECIFICATION DIVISION

DN DOWN

DTL DETAIL

DWG(S) DRAWING(S)

E EAST

EA EACH

EC ELECTRICAL CONTRACTOR

EL ELEVATION

ELEC ELECTRICAL

ENG ENGINEER

EQ EQUAL

EQUIP EQUIPMENT

EQUIV EQUIVALENT

EXST EXISTING

EXT EXTERIOR

FIN FINISHED

FL FLOOR

FT FEET

FUT FUTURE

GC GENERAL CONTRACTOR

GOVT GOVERNMENT

H HEIGHT

HORIZ HORIZONTAL

HT HEIGHT

i.e. THAT IS

IBC INTERNATIONAL BUILDING CODE

IN INCH

INT INTERIOR

LB(S) POUND(S)

M METER

MAX MAXIMUM

MC MECHANICAL CONTRACTOR

MECH MECHANICAL

MEZZ MEZZANINE

MFR MANUFACTURER

MIN MINIMUM

MISC MISCELLANEOUS

MM MILLIMETER

N NORTH

N/A NOT APPLICABLE

NIC NOT IN CONTRACT

NTS NOT TO SCALE

OC ON CENTER

OPP OPPOSITE

OVHD OVERHEAD

PAR PARALLEL

PENT PENTHOUSE

PLYWD PLYWOOD

QTY QUANTITY

REQ(D) REQUIRE(D)

REV REVISION(S)

RM ROOM

RND ROUND

S SOUTH

SCHED SCHEDULE

SECT SECTION

SHT SHEET

SIM SIMILAR

SPEC SPECIFICATION(S)

STD STANDARD

STL STEEL

STOR STORAGE

STRUCT STRUCTURAL

SYM SYMETRICAL

TEMP TEMPORARY

TYP TYPICAL

UNEX UNEXCAVATED

UNFIN UNFINISHED

UNO UNLESS NOTED OTHERWISE

VERT VERTICAL

VEST VESTIBULE

VIF VERIFY IN FIELD

W WEST

W/ WITH

W/O WITHOUT

A/E ARCHITECT/ENGINEER

AB AIR BARRIER

ABS ASBESTOS

ACC ADA ACCESSIBLE

ACR ACRYLIC

ACT ACOUSTIC CEILING TILE

AD ACCESS DOOR

ADJ ADJUSTABLE

ADJT ADJACENT

ADMIN ADMINISTRATION

AEC AUTOMATED EXTERNAL DEFIBRILLATORS

AL ALUMINUM

ALUM ALUMINUM

AP ACCESS PANEL

APC ACOUSTIC PANEL CEILING

ASPH ASPHALT

AUTO AUTOMATIC

AVG AVERAGE

AWP ACOUSTIC WALL PANEL

B.O. BOTTOM OF

BCS BABY CHANGING STATION

BD BOARD

BLK BLOCK

BLKG BLOCKING

BLKHD BULKHEAD

BM(S) BEAM(S)

BOT BOTTOM

BRDG BRIDGING

BRG BEARING

BRKT BRACKET

BT BATHTUB

BTWN BETWEEN

CAB CABINET

CBD CHALKBOARD

CER CERAMIC

CF CUBIC FEET

CFCI CONTRACTOR FURNISHED CONTRACTOR INSTALLED

CFMF COLD-FORMED METAL FRAMING

CG CLEAR FLOAT GLASS

CGD CORNER GUARD

CI CAST IRON

CIG CLEAR INSULATING GLASS

CIP CAST IN PLACE

CJ CONTROL JOINT

CJA CONTROL JOINT ABOVE

CLO CLOSET

CLR CLEAR

CMU CONCRETE MASONRY UNIT

COL COLUMN

COM COMMON

COMB COMBINATION

COMM COMMUNICATIONS

COMPR COMPRESSIBLE

CONF CONFERENCE

CONFIG CONFIGURATION

CORR CORRIDOR

CP COVER PLATE

CPT CARPET

CR CHAIR RAIL

CS COUNTERSINK

CSTJ CONSTRUCTION JOINT

CSWK CASEWORK

CT CERAMIC TILE

CTG CLEAR TEMPERED FLOAT GLASS

CTIG CLEAR TEMPERED INSULATING GLASS

CU COPPER

CU COMBINATION UNIT

CV CONDOM VENDOR

CY CUBIC YARD

CYL CYLINDER

DB DECIBEL

DBL DOUBLE

DC DUST COLLECTOR

DEPR DEPRESS(ION)(ED)

DEPT DEPARTMENT

DET DETENTION

DF DRINKING FOUNTAIN

DG DOOR GRILLE

DIAG DIAGONAL

DPFG DAMPROOFING

DR DOOR

DSN DOWNSPOUT NOZZLE

DW DISHWASHER

DWL(S) DOWEL(S)

DWR DRAWER

EB EXPANSION BOLT

EE EACH END

EEW EMERGENCY EYE WASH

EEWS EMERGENCY EYE WASH SHOWER

EFF EFFICIENCY

EJ EXPANSION JOINT

ELAS ELASTOMERIC

ELEV ELEVATOR

EMER EMERGENCY

ENCL ENCLOSURE

ENTR ENTRANCE

ERF EPOXY RESIN FLOORING

EUI ENERGY USE INTENSITY

EW EACH WAY

EWC ELECTRIC WATER COOLER

EXP EXPANSION

EXP EXPOSED

F FABRIC

F.O. FACE OF

FAB FABRICATE(D)

FB FACE BRICK

FD FLOOR DRAIN

FDN FOUNDATION

FE FIRE EXTINGUISHER

FEC FIRE EXTINGUISHER CABINET

FF FINISH FLOOR

FH FIRE HYDRANT

FHC FIRE HOSE CABINET

FIG FIGURE

FIX FIXTURE

FLASH FLASHING

FLEX FLEXIBLE

FLG FLOORING

FLM FULL LENGTH MIRROR

FLUOR FLUORESCENT

FO FINISH OPENING

FOC FACE OF CONCRETE

FOF FACE OF FINISH

FOM FACE OF MASONRY

FOS FACE OF STUD

FOW FACE OF WALL

FP FIREPROOFING

FR FIRE RESISTANT

FRP FIBERGLASS REINFORCED PANEL

FRT FIRE RESISTANCE TREATED

FS FLOOR SINK

FSS FOLDING SHOWER SEAT

FTG FOOTING

FVC FIRE VALVE CABINET

FWC FABRIC WALL COVERING

G GROUT

GA GAUGE

GAL GALLON

GALV GALVANIZED

GB GRAB BAR

GD GARBAGE DISPOSAL

GEN GENERAL

ARCHITECTURAL ABBREVIATIONS

GFA GROSS FLOOR AREA

GL GLUE LAMINATED

GL GLASS

GMP GUARANTEED MAXIMUM PRICE

GR GUARD RAIL

GR GRADE

GRS GALVANIZED RIGID STEEL

GWB GYPSUM WALL BOARD

GYP GYPSUM

HC HOLLOW CORE

HD HAND DRYER

HDF HIGH DENSITY FIBERBOARD

HDR HEADER

HDWD HARDWOOD

HDWR HARDWARE

HM HOLLOW METAL

HR HOUR

HR HANDRAIL

HS HARDWARE SET

HSS HOLLOW STRUCTURAL SHAPE

HVAC HEATING VENTILATING AND AIR CONDITIONING

IAW IN ACCORDANCE WITH

ID INSIDE DIAMETER

IF INSIDE FACE

IIP INSULATED INFILL PANEL GLASS

IJ ISOLATION JOINT

IJS IN JOIST SPACE

INC INCLUDE(ING)

INSUL INSULATION

JAN JANITOR

JBE JOIST BEARING ELEVATION

JBX JUNCTION BOX

JCT JUNCTION

JFB JOINT FILLER BOARD

JST JOIST

JT JOINT

KCJ KEYED CONSTRUCTION JOINT

KD KNOCKDOWN

KH KITCHEN HOOD

KIT KITCHEN

L ANGLE

LAB LABORATORY

LAM LAMINATED

LAV LAVATORY

LBR LUMBER

LDG LOADING

LF LINEAR FOOT

LG LENGTH (LONG)

LG LAMINATED GLASS

LIN LINEAR

LINO LINOLEUM

LKR LOCKER

LOC LOCATION

LONG LONGITUDINAL

LSC LIFE SAFETY CODE

LTG LIGHTING

LV LOUVER

LVT LUXURY VINYL TILE

MAG MAGNETIC

MAINT MAINTENANCE

MAN MANUAL

MAS MASONRY

MATL MATERIAL

MB MOP BASIN

MBD MARKER BOARD

MBH MOP/BROOM HOLDER

MC MEDICINE CABINET

MEMB MEMBRANE

MH MANHOLE

MR/S MIRROR WITH SHELF

MTD MOUNTED

MTG MOUNTING

MUL MULLION

NC NOISE CRITERIA

NFPA NATIONAL FIRE PROTECTION ASSOCIATION

NOM NOMINAL

O to O OUT TO OUT

OA OVERALL

OFCI OWNER FURNISHED CONTRACTOR INSTALLED

OFF OFFICE

OFOI OWNER FURNISHED OWNER INSTALLED

OH OPPOSITE HAND

OPG(S) OPENING(S)

OSHA OPERATIONAL SAFETY AND HEALTH ADMINISTRATION

OTB OPEN TO BELOW

OVFL OVERFLOW

P PAINT

PAN B PANIC BOLT

PB PARTICLE BOARD

PC PRECAST CONCRETE

PCD PAPER CUP DISPENSER

PCT PORCELAIN CERAMIC TILE

PD PANIC DEVICE

PERF PERFORATED

PERP PERPENDICULAR

PG PATTERN GLASS

PIC PORTABLE INSTRUMENT CONNECTION

PIG PATTERN INSULATING GLASS

PL PLATE

PL PROPERTY LINE

PL PLASTIC LAMINATE

PLAM PLASTIC LAMINATE

PLBG PLUMBING

PR PAIR

PREFAB PREFABRICATED

PROJ PROJECT(OR) (ION)

PS PROJECTION SCREEN

PT POINT

PT POINT OF TANGENCY

PTD PAPER TOWEL DISPENSER

PTD/R COMBINATION TOWEL DISPENSER/RECEPTACLE

PTN PARTITION

PVC POLYVINYL CHLORIDE

PWL SOUND POWER LEVEL

QGV QUAD GAS VALVE

QT QUARRY TILE

QTR RND QUARTER ROUND

R RISER

RAD RADIUS

RB RUBBER BASE

RC REMOTE CONTROL

RCP REFLECTED CEILING PLAN

RD ROOF DRAIN

REF REFERENCE

REFL REFLECTED

REM REMOVABLE

RESIL RESILIENT

RF RESILIENT FLOORING

RF RUBBER FLOOR

RFM RECESSED FLOOR MAT

RH ROBE HOOK

RI&C ROUGH IN AND CONNECT

S SINK

SAT SPRAYED ACOUSTIC TREATMENT

SAW SOUND ABSORBING WALL UNITS

SB SPLASH BLOCK

SC SOLID CORE

SC SHOWER CURTAIN

SCD SEAT COVER DISPENSER

SCH SHOWER CURTAIN HOOK

SCR SHOWER CURTAIN ROD

SCT STRUCTURAL CLAY TILE

SD SOAP DISPENSER

SECY SECRETARY

SF SQUARE FEET

SG SPANDREL GLASS

SG SPECIALTY GLASS

SGL SINGLE

SGV SINGLE GAS VALVE

SH SHOWER

SHM SECURITY HOLLOW METAL

SLNT SEALANT

SM SHEET METAL

SND SANITARY NAPKIN DISPOSAL

SNV SANITARY NAPKIN VENDOR

SO SENSOR OPERATED

SPL SOUND PRESSURE LEVEL

SQ SQUARE

SR SURFACE MOUNTED ELECTRICAL RACEWAY

SS SOLID SURFACE

SSA STORM SHELTER AREA

SSM SOLID SURFACE

SSS STAINLESS STEEL SHELF

SST STAINLESS STEEL

ST STONE

ST STAIR

STAG'D STAGGERED

STC SOUND TRANSMISSION CLASS

STGR STRINGER

SUBFL SUBFLOOR

SUL SULPHUR

SURF SURFACE

SUSP SUSPENDED

SVF SHEET VINYL FLOORING

SVF SERVICE FIXTURE

SVG SERVICE FIXTURE GROUP

T TREAD

T&G TONGUE AND GROOVE

T.O. TOP OF

TAN TANGENT

TB TOWEL BAR

TBD TACK BOARD

TCP TOILET COMPARTMENT PARTITION

TERR TERRAZZO

TFG TINTED FLOAT GLASS

TG TEMPERED GLASS

TH THRESHOLD

THK THICK(NESS)

TI TENANT IMPROVEMENT

TIG TINTED INSULATING GLASS

TMR TILT MIRROR UNIT

TOIL TOILET

TOP TOP OF PAVING

TRANS TRANSVERSE

TT TERRAZZO TILE

TTD TOILET TISSUE DISPENSER

TTG TINTED TEMPERED FLOAT GLASS

TTIG TINTED TEMPERED INSULATING GLASS

TW TACK WALL

UL UNDERWRITERS LABORATORIES

UR URINAL

US UTILITY SHELF

UTIL UTILITY

VB VAPOR BARRIER

VB VINYL BASE

VCB VENTED COVE BASE

VF VINYL FLOOR

VOC VOLITILE ORGANIC COMPOUND

VOL VOLUME

VP VENEER PLASTER

VT VINYL TILE

VWC VINYL WALL COVERING

W WIDE

WB WALL BASE

WC WATER CLOSET

WC WALL COVERING

WCL WATER CLOSET/LAVATORY COMBINATION

WD WOOD

WDF WOOD FLOORING

WDW WINDOW

WG POLISHED WIRE GLASS

WI WROUGHT IRON

WOM WALK OFF MAT

WR WASTE RECEPTACLE

WRB WEATHER RESISTANT BARRIER

WW WARM WHITE

WWF WELDED WIRE FABRIC

YD YARD

REVISIONS

07/11/2023

CD OWNER

REVIEW

CONSTRUCTION

DOCUMENTS

2.RV

RV.CRV.C

3.RV

1.RV

RV.DRV.D

RV.BRV.B

RV.A

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235 (EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

(EXST)

CORRIDOR

(EXST)

PERSONNEL

SALLYPORT

INTERIOR COURTYARD SIDEEXTERIOR FIRE LANE SIDE

(EXST)

DUMPSTER

PAD

STAFF ENTRANCE FROM FIRE LANE

AREA OF WORK

2 2

(EXST) OFFICE

(EXST) WORK

AREA

(EXST)

RECEPTION

(EXST) LOBBY

(EXST)

CONFERENCE /

VISIT ROOM

(EXST)

CONTROL

(EXST)

CONFERENCE

(EXST)

ADMITTING

(EXST)

SALLYPORT

(EXST)

VOCATIONAL

EDUCATION

CLASSROOM

(EXST) TOILET

(EXST) OFFICE

(EXST)

SHOWER

(EXST)

STORAGE

A229

EXTERIOR FIRE LANE SIDE INTERIOR COURTYARD SIDE

GENERATOR ROOM

TEMPORARY SECURITY DIAGRAM

A1.1RV

FB1

F B

FB2

F B

MAINTAIN EXISTING

1-HR OCCUPANCY

SEPARATION WALL

2 HOUR OCCUPANCY

SEPARATION WALL

MAINTAIN EXISTING

2-HR RATED WALL

FB1: 1-HOUR OCCUPANCY FIRE SEPARATION WALL

FB2: 2-HOUR OCCUPANCY FIRE SEPARATION WALL

FIRE BARRIER LEGEND

F B

(EXST) LOW VOLTAGE ROOM

(EXST) OFFICE

(EXST) GENERATOR ROOM

(EXST) STORAGE

(EXST) STORAGE(EXST) MECHANICAL ROOM

(EXST) ELECTRICAL ROOM

(EXST) LIFE SAFETY

A1.1RV

(EXST) LOW VOLTAGE ROOM

(EXST) OFFICE

(EXST) GENERATOR ROOM

(EXST) STORAGE

(EXST) STORAGE(EXST) MECHANICAL ROOM

(EXST) ELECTRICAL ROOM

(EXST) LIFE SAFETY

EXTERIOR FIRE LANE SIDE INTERIOR COURTYARD SIDE

SW2 SECONDARY SECURITY WALLS

(Restraint / Staff Protection)

SW3 TERTIARY SECURITY WALLS

SW1 PRIMARY SECURITY WALLS

(Glass / Mech / Hardware / Movement Doors

SECURITY WALL LEGEND

SW2

S W

SW1

S W

SW2

S W

SW1

S W

SW1

S W

SW1

S W

SW1

S W

SW1 S

S W

SW1

S W

SW1

S W

SW1

S W

SW2

SW2 SW2

S W

SW2

S W

SW2

S W

SW2

SW3

S W

SW3

SW1

S W

SW1

S W

2 SW2

SW2

S W

SW2

S W

A1.1RV

SECURITY & FIRE WALL LEGEND

SW2: SECONDARY SECURITY WALLS

(Restraint/Staff Protection)

SW1: PRIMARY SECURITY WALLS

(Glass / Mech / Hardware / Movement Doors)

FB2: 2-HOUR OCCUPANCY

FIRE SEPARATION WALL

FB1: 1-HOUR OCCUPANCY

FIRE SEPARATION WALL

SW3: TERTIARY SECURITY WALLS

TEMPORARY SECURITY NOTES

TO MAINTAIN 2-LOCKABLE-DOOR SECURITY SEPARATION

BETWEEN YOUTH CORRECTIONAL FACILITY AND EXTERIOR AT

ALL TIMES, THE CONTRACTOR SHALL FOLLOW THE NECESSARY

STEPS TO ACCESS AND SECURE THE AREA OF WORK DURING

CONSTRUCTION:

1. INITIALLY, CONTRACTOR TO GO THROUGH STAFF ENTRANCE

AND PERSONNEL SALLYPORT (MUST BE BUZZED IN BY

OREGON YOUTH AUTHORITY SECURITY CONTROL, WITH

PERMISSION FROM AUTHORIZED FIELD REPRESENTATIVE).

2. OREGON YOUTH AUTHORITY SECURITY CONTROL CAN OPEN

BOTH DOORS OF THE PERSONNEL SALLYPORT IF/WHEN THE

INTERIOR COURTYARD IS CLEARED, TO ALLOW

CONTRACTOR TO TRANSPORT CONTRUCTION TOOLS AND

MATERIALS.

3. ONCE INSIDE THE DESIGNATED AREA OF WORK,

CONTRACTOR TO ERECT A LOCKOUT DOOR, IN PLACE OF

REMOVED LOUVER, SO THAT THE LOCKABLE DOOR CANNOT

BE OPENED FROM THE GENERATOR ROOM SIDE. LOCKOUT

DOOR MUST BE UNLOCKED FROM THE EXTERIOR SIDE (FIRE

LANE SIDE OF THE DOOR) ONLY. CONTRACTOR TO ALSO

ERECT TEMPORARY WALL AND LOCKABLE DOOR IN EXISTING

STORAGE ROOM.

A. INTERIOR SECURITY WALL 3A TO HAVE 5/8" PLYWOOD

SHEATHING ON BOTH SIDES OF STUD, SET AT 12"

CENTERS. TEMPORARY SECURITY DOOR TO BE

SECURED WITH A PAD-LOCK AND SECURITY

FASTENERS.

B. CONSTRUCT TEMPORARY WALL 3B AFTER

TEMPORARY GENERATOR IS INSTALLED AND

ACCEPTED FOR USE. TEMPORARY WALL 3B TO HAVE

5/8" PLYWOOD SHEATHING ON BOTH SIDES OF STUD,

SET AT 12" CENTERS. TEMPORARY SECURITY DOOR

TO BE SECURED WITH PAD-LOCK AND SECURITY

FASTENERS.

4. ONCE LOCKOUT DOORS/TEMPORARY WALLS ARE

ESTABLISHED, CONTRACTOR CAN USE THEIR OWN KEYS TO

UNLOCK THE TEMPORARY LOCKABLE DOORS AND ACCESS

THE GENERATOR ROOM FROM THE EXTERIOR SIDE (FIRE

LANE SIDE). CONTRACTOR TO CARRY OUT WORK IN

HATCHED AREA, AS NEEDED.

5. DOOR BETWEEN ROOM A230 AND ROOM A229 IS TO REMAIN

LOCKED AT ALL TIMES, EXCEPT AS APPROVED BY OWNER.

6. ALL OTHER SPACES ACCESSED BY OWNER ESCORT, ONLY.

7. AFTER NEW GENERATOR AND EXTERIOR OPERABLE WALL

LOUVER IS INSTALLED, USE ROUTE NUMBER 1 FOR THE

REMAINDER OF THE PROJECT.

8. CONTRACTOR TO ENSURE ROOF OPENING IS SECURED WITH

PLYWOOD AT THE THE END OF EACH DAY.

9. FOR EACH LOCATION, CONTRACTOR SHALL WORK WITH

OWNER TO DETERMINE THE BEST LOCATION AND MEANS OF

INSTALLING/SECURING TEMPORARY WALLS AND CEILINGS.

L R

G ro u p

REVISIONS

KEY PLAN

A B C D E F

O Y

A R

E G

A L G

E N

E R

A T

O R

R E

P L A

C E

M E

N T

R O

G U

E V

A L L

E Y

Y O

U T

H C

O R

R E

C T

A L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y N

E F

S T

R A

N T

S P

A S

S O

NORTH

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

ROGUE VALLEY -

ORIENTATION &

CODE PLANS

A0.1RV

SCALE: 1/16" = 1'-0"A0.1RV

3D ROGUE VALLEY - TEMPORARY SECURITY DIAGRAM

SCALE: 1/32" = 1'-0"A0.1RV

5D ROGUE VALLEY - ORIENTATION PLAN

SCALE: 1/32" = 1'-0"A0.1RV

3B ROGUE VALLEY - FIRE SEPARATION DIAGRAM

SCALE: 1/32" = 1'-0"A0.1RV

5B ROGUE VALLEY - TEMPORARY SECURITY DIAGRAM

REVISIONS

07/11/2023

CD OWNER

REVIEW

GENERAL ARCHITECTURAL NOTES

1. FURNISH AND INSTALL FIRE-TREATED WOOD BLOCKING OR

METAL BACKING PLATE IN METAL STUD PARTITIONS FOR THE

PROPER ANCHORAGE OF ALL WALL ATTACHED ITEMS; I.E.

TOILET ACCESSORIES, CASEWORK, MILLWORK, WALL-

MOUNTED FIXTURES, MARKER BOARDS, TACK BOARDS, DOOR

STOPS, AUDIO VISUAL BRACKETS, AND OTHER WALL ATTACHED

ITEMS.

2. SCRIBE GYPSUM WALL BOARD OF WALLS AND PARTITIONS TO

IRREGULARITIES OF DECK ABOVE. SEAL TIGHTLY AROUND ALL

PENETRATIONS.

DEMOLITION GENERAL NOTES

THE CONTRACTOR SHALL:

A. COORDINATE ALL DEMOLITION AND PHASING EFFORTS WITH THE

OWNER’S REPRESENTATIVE. EVERY EFFORT SHALL BE MADE TO

MINIMIZE DISRUPTION OF OWNER’S OPERATIONS. EXCESSIVE

NOISE OR VIBRATION SHALL BE PRE-APPROVED AND

COORDINATED WITH THE OWNER’S REPRESENTATIVE. IN ALL

CASES, PROVISIONS SHALL BE MADE FOR USER’S SAFETY.

B. COORDINATE ANY DISRUPTION OF UTILITY SERVICES WITH THE

OWNER AND AS SPECIFIED.

C. CONSTRUCT TEMPORARY CONSTRUCTION PARTITIONS WITHIN

THE EXISTING BUILDING WHICH OFFER A ONE-HOUR ENCLOSURE

TO ISOLATE ANY DEMOLITION/CONSTRUCTION WORK FROM THE

GENERAL PUBLIC AND AS DEEMED NECESSARY BY THE OWNER

AND CODE OFFICIAL HAVING JURISDICTION. COORDINATE

LOCATIONS WITH THE OWNER AND MAINTAIN MEANS OF EGRESS

THROUGHOUT THE WORK.

D. MAINTAIN A SECURE, WEATHER-TIGHT ENCLOSURE AT ALL

TIMES.

E. VERIFY ALL EXISTING CONDITIONS, DIMENSIONS AND

ELEVATIONS AND NOTIFY THE ARCHITECT OF ANY

DISCREPANCIES.

F. REMOVE IN THEIR ENTIRETY ALL ITEMS, AS REQUIRED TO

EXECUTE THE DEMOLITION/CONSTRUCTION WORK DESCRIBED

BY THE DRAWINGS.

G. THE OWNER SHALL RESERVE THE RIGHT TO SALVAGE ANY

MATERIALS.

H. PROVIDE PROTECTION FOR ALL EXISTING BUILDING MATERIALS

AND EQUIPMENT FROM DAMAGE DUE TO ANY DEMOLITION OR

CONSTRUCTION-RELATED INCIDENT PERFORMED UNDER THIS

CONTRACT.

I. REPAIR OR REPLACE ITEMS THAT ARE DAMAGED AS A RESULT

OF DEMOLITION OR CONSTRUCTION TO MATCH EXISTING FINISH

AND/OR CONDITION.

J. EXISTING MATERIALS SHALL NOT BE REUSED UNLESS NOTED

OTHERWISE OR AS AUTHORIZED BY ARCHITECT.

K. VERIFY AND MAINTAIN THE LOCATION OF EXISTING POWER,

COMMUNICATION AND DATA CABLES TO PREVENT

INTERRUPTION OF THEIR SERVICE.

L. PATCH FLOOR, WALL AND CEILING PENETRATIONS RESULTING

FROM REMOVAL OR RE-ROUTING OF NEW OR EXISTING PIPING,

DUCTWORK, CONDUIT, AND OTHER ITEMS, AS REQUIRED TO

MAINTAIN FIRE-RESISTANCE-RATED SEPARATIONS. FINISH AS

REQUIRED FOR NEW OR EXISTING ADJACENT SURFACES.

M. CAP ALL DISCONNECTED MECHANICAL PIPING LINES WITHIN THE

WALL OR FLOOR. PATCH AND FINISH AS REQUIRED TO MATCH

NEW OR EXISTING ADJACENT SURFACES.

N. SEE MECHANICAL AND ELECTRICAL DRAWINGS AND NOTES FOR

FURTHER SEQUENCING AND SCOPE OF WORK.

O. WHERE PLASTER/STUD WALLS ARE INDICATED TO BE REMOVED,

PREPARE ADJACENT WALLS TO RECEIVE NEW PATCH/FINISH BY

SAWCUTTING ADJACENT PLASTER FINISH A MINIMUM OF 1'-0"

BEYOND DEMOLITION.

DEMOLITION NOTES APPLY TO ALL DEMOLITION SHEETS.

SECURITY & FIRE WALL LEGEND

SW2: SECONDARY SECURITY WALLS

(Restraint/Staff Protection)

SW1: PRIMARY SECURITY WALLS

(Glass / Mech / Hardware / Movement Doors)

FB2: 2-HOUR OCCUPANCY

FIRE SEPARATION WALL

FB1: 1-HOUR OCCUPANCY

FIRE SEPARATION WALL

SW3: TERTIARY SECURITY WALLS

2.OC

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

MATCHLINE A MATCHLINE A

MATCHLINE B MATCHLINE B

2.RV

RV.CRV.C

3.RV

1.RV

RV.D

RV.BRV.B

RV.A

MAINTAIN EXISTING

1-HR OCCUPANCY

SEPARATION WALL

2 HOUR OCCUPANCY

SEPARATION WALL

MAINTAIN EXISTING

2-HR RATED WALL

FB1

F B

FB2

F B

(EXST)

STORAGE

A229

FB2

EQ EQ

MUFFLER TAIL TO EDGE OF VENTILATOR

10' - 0" MIN. HORIZONTAL DISTANCE

12' - 11 3/4" (+/-) VIF

NEW

GENERATOR

ASSEMBLY

MUFFLER

ASSEMBLY

GRAVITY VENTILATOR BEYOND

VIF

1' - 8"

VIF

3' - 8 5/8" (+/-)

' 1

M A

T C

N E

EQ EQ

A1.4RV RV.BRV.A

NOTE: INSTALL NEW CONC.

EQUIPMENT PAD TO MATCH NEW

GENERATOR PAD REQUIREMENTS

SEE SPEC

0' - 6" MIN.

SEE SPEC

0' - 6" MIN.

A9.1

M A

T .O

T U

OPERABLE WALL

LOUVER

INFILL WALL

1' - 8 1/4" VIF 10' - 2" VIF

DOCKING STATION -

SEE ELEC.

FUEL FILL PANEL -

SEE ELEC.

EXISTING DOWNSPOUT

TO REMAIN

A1.4RV

A9.1

A1.4RV

RV.BRV.A

A9.1

7' - 0" VIF

A1.1RV

A1.1RV 5D

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233 6

17' - 11 1/2" VIF

(EXST) OFFICE (EXST) WAITING(EXST) EXAM(EXST) EXAM

MATCHLINE A

MATCHLINE B MATCHLINE B

INSTALL

OPERABLE

WALL LOUVER

(EXST) OVERHEAD JOIST

NEW GRAVITY

VENTILATOR ROUGH

OPENING ABOVE

NEW

GENERATOR

ASSEMBLY

CENTER GENERATOR

AND LOUVER AT

ROOM CENTERLINE

A1.4RV

1' - 10"

EXST MUFFLER

PENETRATION ABOVE

TO REMAIN

(EXST) OVERHEAD JOIST

(EXST) BRACED FRAME

2.RV

RV.CRV.C

3.RV

1.RV

RV.D

RV.BRV.B

RV.A

18' - 7" 17' - 11"

2' - 0" VIF 12' - 11 1/2" 3' - 0" MIN.

NEW DUCTWORK

ASSEMBLY - SEE MECH.

A9.1

E Q

(EXST)

STORAGE

A229

A1.1RV

A1.1RV 5D

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

1' - 8" VIF

9' - 0" VIF 7' - 2" VIF

(EXST) OFFICE

(EXST) WAITING(EXST) EXAM(EXST) EXAM

MATCHLINE A MATCHLINE A

MATCHLINE B MATCHLINE B

EXST MUFFLER PENETRATION

ABOVE TO REMAIN - SEE RCP

EXST OVERHEAD JOIST

REMOVE (EXST)

GENERATOR, DUCTWORK,

MUFFLER, AND ASSOCIATED

CONC. EQUIP. PAD

EXST BRACED FRAME

EXST OVERHEAD JOIST

REMOVE EXISTING LOUVER

A9.1

A1.4RV

EXST OVERHEAD JOIST

A9.1

EXST FIRE

EXTINGUISHER CABINET

(EXST)

STORAGE

A229

2.RV

RV.CRV.C

3.RV

1.RV

RV.DRV.D

RV.BRV.B

RV.A

18' - 7" 17' - 11"

17' - 11 1/2" VIF

2.OC

2.RV

RV.CRV.C

3.RV

1.RV

RV.D

RV.BRV.B

RV.A

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

(EXST)

STORAGE

A229

MATCHLINE A MATCHLINE A

MATCHLINE B MATCHLINE B

S E

C O

N D

A R

Y S

E C

U R

W A

S E

C O

N D

A R

Y S

E C

U R

W A

P R

R Y

S E

C U

Y W

S W

SW2

S W

SW1

SW2

S W

SW2

S W

L R

G ro u p

REVISIONS

KEY PLAN

A B C D E F

O Y

A R

E G

A L G

E N

E R

A T

O R

R E

P L A

C E

M E

N T

R O

G U

E V

A L L

E Y

Y O

U T

H C

O R

R E

C T

A L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y N

E F

S T

R A

N T

S P

A S

S O

NORTH

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

ROGUE VALLEY -

FLOOR PLANS &

ELEVATIONS

A1.1RVSCALE: 1/8" = 1'-0"A1.1RV

5A ROGUE VALLEY - FIRE SEPARATION DIAGRAM

SCALE: 1/4" = 1'-0"A1.1RV

5C ROGUE VALLEY SECTION DIAGRAM - N-S

SCALE: 1/4" = 1'-0"A1.1RV

5D ROGUE VALLEY - WEST ELEVATION

SCALE: 1/4" = 1'-0"A1.1RV

4D ROGUE VALLEY - FLOOR PLAN

SCALE: 1/4" = 1'-0"A1.1RV

4A ROGUE VALLEY - DEMO PLAN

N N

(EXST) FIRE

EXTINGUISHER

SCALE: 1/8" = 1'-0"A1.1RV

5B ROGUE VALLEY - SECURITY SEPARATION DIAGRAM

REVISIONS

07/11/2023

CD OWNER

REVIEW

A1.1RV

1/8" / 1'-0"

GENERATOR ROOM - VIF

17' - 11 1/2"

A1.4RV

A9.1

2.RV

1.RV

M A

C U

R B

H T

C U

R B

H T

GENERATOR ASSEMBLY - SEE ELECTRICAL AND SPEC. MECHANICAL DUCTWORK - SEE MECHANICAL

O P

E R

A B

L E

W A

L L

L O

U V

E R

T A

L L

OPERABLE WALL LOUVER ASSEMBLY

(EXST) CEMENTIOUS PLASTER

SHIM & SEALANT AS REQUIRED

FLASHING W/ DRIP EDGE - SEE DETAIL 2A/A9.1

(EXST) BUILDING PAPER TUCKED UNDER SELF-ADHERED

WATERPROOFING MEMBRANE

5/8" GYP SHEATHING

FIBER CEMENT PANEL SIDING

6" BLANKET INSULATION

3/4" FIRE-TREATED PLYWOOD SHEATHING

ADHERED WATERPROOFING LAPPED OVER FLASHING

REMOVE/REPLACE CEMENTITIOUS PLASTER TO

INSTALL FLASHING AND WATERPROOFING

6" RUNNER CHANNEL AT INFILL HEAD OF INFILL WALL

(EXST) BUILDING PAPER

(EXST) PLYWOOD SHEATHING

6" RUNNER CHANNEL

(EXST) PLYWOOD SHEATHING

FLASH OVER NEW INFILL WALL

WEATHER BARRIER

5/8" GYP SHEATHING

FIBER CEMENT PANEL SIDING

OPERABLE WALL LOUVER ASSEMBLY

WEATHER BARRIER

BLANKET INSULATION

1/2" BACKER ROD + SEALANT

6" COLD FORMED METAL FRAMING

FLASHING WITH WEEP

3/4" FIRE TREATED PLYWOOD SHEATHING

1/4" STEEL PLATE

MOUNTING ANGLE BY LOUVER SUPPLIER

SECURITY BAR ASSEMBLY

BIRD SCREEN ASSEMBLY

6" STUD, TYP.

0' - 6"

BLANKET INSULATION

6" COLD-FORMED METAL FRAMING

5/8" GYP SHEATHING

FIBER CEMENT PANEL SIDING

1/4" STEEL PLATE OPERABLE WALL LOUVER ASSEMBLY

0' - 0 1/2"

WEATHER BARRIER

3/4" FIRE TREATED PLYWOOD SHEATHING

6" STUD, TYP.

SECURITY GRILL ASSEMBLY

MOUNTING ANGLE - BY LOUVER SUPPLIER

SHIM & SEALANTEXTENDED SILL W/ END DAMS

BY LOUVER SUPPLIER

1/4" BACKER ROD & SEALANT

BIRD SCREEN ASSEMBLY

3/4" PLYWOOD SHEATHING

TYP.

0' - 6"

3/4" PLYWOOD SHEATHING

6" SOUND ATTENUATION BLANKET INSULATION

5/8" GYP SHEATHING

WEATHER BARRIER

SHEET METAL FLASHING - SEE DETAILS 4E/A9.1 & 4F/A9.1

SHIM INFILL WALL AS REQUIRED

6" RUNNER CHANNEL

ADD FLASHING

1/8" PER FOOT (MIN.) SLOPEE

S T

S L

A B

FIBER CEMENT PANEL SIDING

L R

G ro u p

REVISIONS

A B C D E F

O Y

A R

E G

A L G

E N

E R

A T

O R

R E

P L A

C E

M E

N T

R O

G U

E V

A L L

E Y

Y O

U T

H C

O R

R E

C T

A L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y N

E F

S T

R A

N T

S P

A S

S O

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

ROGUE VALLEY -

SECTION &

EXTERIOR

DETAILS

A1.4RV

(EXST) RIGID INSULATION AT PARAPET EXTENSION

(EXST) OVERLAPPING EPMD ROOFING MEMBRANE

(EXST) ROOF SYSTEM

(EXST) METAL DECKING

(EXST) K-SERIES BAR JOIST ANGLE WEB

(EXST) W-SHAPE STEEL

(EXST) PREFIN. METAL WALL CAP

(EXST) 2X4 NOMINAL BLOCKING

(EXST) 1/2" PLYWOOD SHEATHING

CUT BACK (EXST) 3/4" CEMENTITIOUS

PLASTER TO ALLOW FOR FLASHING

(EXST) 6" BATT INSULATION - EXTENDED 6" ABOVE ROOF

(EXST) CONCRETE SLAB

(EXST) 6" BATT INSULATION IN STUD CAVITY - EXTEND 6” PAST ROOFLINE

(EXST) AISC ANGLE STEEL L5X5X3/8

(EXST) 3/4” PLYWOOD SHEATHING

(EXST) BUILDING PAPER

REMOVE & REPLACE MUFFLER/EXHAUST ASSEMBLY ON EXISTING ROUGH

OPENING - SEE MUFFLER AND EXHAUST CURB SUPPORT DETAIL 5E/A9.1

(EXST) 2x6 BLOCKING ANCHORED TO DECK @ 2' - 0" O.C.

NO SCALEA1.4RV

5A ROGUE VALLEY E-W SECTION

SCALE: 3" = 1'-0"A1.4RV

2E INFILL WALL - HEAD DETAIL

SCALE: 3" = 1'-0"A1.4RV

3E OPERABLE WALL LOUVER - HEAD DETAIL

SCALE: 3" = 1'-0"A1.4RV

4E OPERABLE WALL LOUVER - EXTENDED SILL DETAIL

SCALE: 3" = 1'-0"A1.4RV

5E INFILL WALL - SILL DETAIL

GRAVITY VENTILATOR - SEE MECH.

REVISIONS

07/11/2023

CD OWNER

REVIEW

CONSTRUCTION

DOCUMENTS

A1.1RV

1/8" / 1'-0"

GENERATOR ROOM - VIF

17' - 11 1/2"

13' - 0 (+/-)

A1.4RV

A9.1

2.RV

1.RV

MIN.

0' - 6"

MIN.

0' - 6"

M A

C U

R B

H T

C U

R B

H T

GENERATOR ASSEMBLY - SEE ELECTRICAL AND SPEC. MECHANICAL DUCTWORK - SEE MECHANICAL

O P

E R

A B

L E

W A

L L

L O

U V

E R

T A

L L

OPERABLE WALL LOUVER ASSEMBLY

(EXST) RIGID INSULATION AT PARAPET EXTENSION

(EXST) OVERLAPPING EPMD ROOFING MEMBRANE

(EXST) ROOF SYSTEM

(EXST) METAL DECKING

(EXST) K-SERIES BAR JOIST ANGLE WEB

(EXST) W-SHAPE STEEL

(EXST) PREFIN. METAL WALL CAP

(EXST) 2X4 NOMINAL BLOCKING

(EXST) 1/2" PLYWOOD SHEATHING

CUT BACK (EXST) 3/4" CEMENTITIOUS

PLASTER TO ALLOW FOR FLASHING

(EXST) 6" BATT INSULATION - EXTENDED 6" ABOVE ROOF

(EXST) CONCRETE SLAB

(EXST) 6" BATT INSULATION IN STUD CAVITY - EXTEND 6” PAST ROOFLINE

(EXST) AISC ANGLE STEEL L5X5X3/8

(EXST) 3/4” PLYWOOD SHEATHING

(EXST) BUILDING PAPER

REMOVE & REPLACE MUFFLER/EXHAUST ASSEMBLY ON EXISTING ROUGH

OPENING - SEE MUFFLER AND EXHAUST CURB SUPPORT DETAIL 5E/A9.1

(EXST) 2x6 BLOCKING ANCHORED TO DECK @ 2' - 0" O.C.

GRAVITY VENTILATOR - SEE MECH.

METAL BACKING PLATE IN METAL STUD PARTITIONS FOR THE

PROPER ANCHORAGE OF ALL WALL ATTACHED ITEMS; I.E.

TOILET ACCESSORIES, CASEWORK, MILLWORK, WALL-

MOUNTED FIXTURES, MARKER BOARDS, TACK BOARDS, DOOR

STOPS, AUDIO VISUAL BRACKETS, AND OTHER WALL ATTACHED

ITEMS.

2. SCRIBE GYPSUM WALL BOARD OF WALLS AND PARTITIONS TO

IRREGULARITIES OF DECK ABOVE. SEAL TIGHTLY AROUND ALL

PENETRATIONS.

DEMOLITION GENERAL NOTES

THE CONTRACTOR SHALL:

A. COORDINATE ALL DEMOLITION AND PHASING EFFORTS WITH THE

OWNER’S REPRESENTATIVE. EVERY EFFORT SHALL BE MADE TO

MINIMIZE DISRUPTION OF OWNER’S OPERATIONS. EXCESSIVE

NOISE OR VIBRATION SHALL BE PRE-APPROVED AND

COORDINATED WITH THE OWNER’S REPRESENTATIVE. IN ALL

CASES, PROVISIONS SHALL BE MADE FOR USER’S SAFETY.

B. COORDINATE ANY DISRUPTION OF UTILITY SERVICES WITH THE

OWNER AND AS SPECIFIED.

C. CONSTRUCT TEMPORARY CONSTRUCTION PARTITIONS WITHIN

THE EXISTING BUILDING WHICH OFFER A ONE-HOUR ENCLOSURE

TO ISOLATE ANY DEMOLITION/CONSTRUCTION WORK FROM THE

GENERAL PUBLIC AND AS DEEMED NECESSARY BY THE OWNER

AND CODE OFFICIAL HAVING JURISDICTION. COORDINATE

LOCATIONS WITH THE OWNER AND MAINTAIN MEANS OF EGRESS

THROUGHOUT THE WORK.

D. MAINTAIN A SECURE, WEATHER-TIGHT ENCLOSURE AT ALL

TIMES.

E. VERIFY ALL EXISTING CONDITIONS, DIMENSIONS AND

ELEVATIONS AND NOTIFY THE ARCHITECT OF ANY

DISCREPANCIES.

F. REMOVE IN THEIR ENTIRETY ALL ITEMS, AS REQUIRED TO

EXECUTE THE DEMOLITION/CONSTRUCTION WORK DESCRIBED

BY THE DRAWINGS.

G. THE OWNER SHALL RESERVE THE RIGHT TO SALVAGE ANY

MATERIALS.

H. PROVIDE PROTECTION FOR ALL EXISTING BUILDING MATERIALS

AND EQUIPMENT FROM DAMAGE DUE TO ANY DEMOLITION OR

CONSTRUCTION-RELATED INCIDENT PERFORMED UNDER THIS

CONTRACT.

I. REPAIR OR REPLACE ITEMS THAT ARE DAMAGED AS A RESULT

OF DEMOLITION OR CONSTRUCTION TO MATCH EXISTING FINISH

AND/OR CONDITION.

J. EXISTING MATERIALS SHALL NOT BE REUSED UNLESS NOTED

OTHERWISE OR AS AUTHORIZED BY ARCHITECT.

K. VERIFY AND MAINTAIN THE LOCATION OF EXISTING POWER,

COMMUNICATION AND DATA CABLES TO PREVENT

INTERRUPTION OF THEIR SERVICE.

L. PATCH FLOOR, WALL AND CEILING PENETRATIONS RESULTING

FROM REMOVAL OR RE-ROUTING OF NEW OR EXISTING PIPING,

DUCTWORK, CONDUIT, AND OTHER ITEMS, AS REQUIRED TO

MAINTAIN FIRE-RESISTANCE-RATED SEPARATIONS. FINISH AS

REQUIRED FOR NEW OR EXISTING ADJACENT SURFACES.

M. CAP ALL DISCONNECTED MECHANICAL PIPING LINES WITHIN THE

WALL OR FLOOR. PATCH AND FINISH AS REQUIRED TO MATCH

NEW OR EXISTING ADJACENT SURFACES.

N. SEE MECHANICAL AND ELECTRICAL DRAWINGS AND NOTES FOR

FURTHER SEQUENCING AND SCOPE OF WORK.

O. WHERE PLASTER/STUD WALLS ARE INDICATED TO BE REMOVED,

PREPARE ADJACENT WALLS TO RECEIVE NEW PATCH/FINISH BY

SAWCUTTING ADJACENT PLASTER FINISH A MINIMUM OF 1'-0"

BEYOND DEMOLITION.

DEMOLITION NOTES APPLY TO ALL DEMOLITION SHEETS.

A1.1RV

A1.1RV 5D

A1.4RV

E Q

EXISTING JOIST

EXISTING BRACED FRAME

EXISTING JOIST EXISTING JOIST

EXISTING JOISTEXISTING JOIST

EXISTING JOIST

(EXST) MUFFLER

PENETRATION TO REMAIN

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

MECHANICAL

ROOM

A236

(EXST)

STORAGE

A232

(EXST) LOW

VOLTAGE

A233

(EXST) OFFICE

A234

(EXST)

GENERATOR

ROOM

A235

VIF

1' - 8" 10' - 3 1/2" (+/-) VIF

REMOVE MUFFLER ABOVE ROOF - SEE ROOF PLANS

8' - 2" VIF 5' - 0 1/2" VIF

RELOCATE (EXST)

STRIP LIGHTS

REMOVE ATTACHED SHROUD

2.RV

RV.CRV.C

3.RV

1.RV

RV.D

RV.BRV.B

RV.ARV.A

REMOVE (EXST) DUCTWORK

AND ASSOCIATED EQUIPMENT

(EXST)

STORAGE

A229

A1.1RV

A1.4RV

MECH R.O. LENGTH

6' - 0"

/2 " M

E C

H R

T H

EXISTING JOIST

EXISTING BRACED FRAME

1' - 10" FROM BACK WALL

E Q

EXISTING MUFFLER

PENETRATION

E Q

GENERATOR

ASSEMBLY

(EXST) OFFICE

A234

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

MECHANICAL

ROOM

A236

(EXST)

STORAGE

A232

(EXST) LOW

VOLTAGE

A233

(EXST) OFFICE

A234

(EXST)

GENERATOR

ROOM

A235

EXISTING JOIST

2.RV

RV.CRV.C

3.RV

1.RV

RV.D

RV.BRV.B

RV.ARV.A

S U

S P

. L

H T

S U

S P

. L

H T

4' - 9" 4' - 4"

6' - 0" VIF

VIF

1' - 8" 10' - 3 1/2" VIF

GRAVITY VENTILATOR ROUGH OPENING -

SEE ROOF PLANS & 5A/A9.1

RELOCATED STRIP

LIGHTS - ALIGN WITH

EXISTING FIXTURES

GENERATOR

DUCTWORK -

SEE MECH.

(EXST)

STORAGE

A229

L R

G ro u p

REVISIONS

KEY PLAN

A B C D E F

O Y

A R

E G

A L G

E N

E R

A T

O R

R E

P L A

C E

M E

N T

R O

G U

E V

A L L

E Y

Y O

U T

H C

O R

R E

C T

A L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y N

E F

S T

R A

N T

S P

A S

S O

NORTH

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

ROGUE VALLEY -

REFLECTED

CEILING PLANS

A2.1RV

SCALE: 1/4" = 1'-0"A2.1RV

4A ROGUE VALLEY - DEMO REFLECTED CEILING PLAN

SCALE: 1/4" = 1'-0"A2.1RV

4D ROGUE VALLEY - REFLECTED CEILING PLAN

N N

REVISIONS

07/11/2023

CD OWNER

REVIEW

CONSTRUCTION

DOCUMENTS

tgovreau Line tgovreau Line tgovreau Line tgovreau Line

Z.OC Z.OC

A1.1RV

A1.4RV

REMOVE EXISTING MUFFLER

AND SUPPORT CURB FOR

EXHAUST PIPE TO REMAIN

JOIST BELOW DECK

VIF

5' - 10" (+/-)

MATCHLINE AMATCHLINE A

35' - 7 5/8"

MATCHLINE B MATCHLINE B

EXISTING ROOF WALKWAY

DEMO + REROUTE EXISTING

ROOF WALKWAY

REMOVE EXISTING ROOF

DECK FOR NEW ROUGH

OPENING

2.RV

RV.CRV.C

3.RV

1.RV

RV.D

RV.BRV.B

RV.A

RV.Z RV.Z

REMOVE AND REPLACE

ROOFING FOR MUFFLER

SUPPORT CURBS

JOIST BELOW DECK

Z.OC

A1.1RV

A1.4RV

M U

F F

T A

O E

D G

E O

F R

T U

JOIST BELOW DECK

MATCHLINE AMATCHLINE A

MATCHLINE B MATCHLINE B

EXISTING ROOF WALKWAY

NEW OPENING FOR GRAVITY

VENTILATOR HOOD - SEE

MECH.

TYPICAL JOIST

REINFORCEMENTS - SEE

DETAIL 5A/A9.1

6' - 0"

REROUTED WALKWAY

ADD 2-INCHES ADDITIONAL

INSULATION AND TAPERED

INSULATION TO PROVIDE MIN.

2-INCHES COVER ABOE NEW

STEEL SUPPORT ANGLES

2.RV

RV.CRV.C

3.RV

1.RV

RV.DRV.D

RV.BRV.B

RV.ARV.A

RV.Z

DECK SUPPORT ANGLES

ABOVE DECK IN PLANE OF

ROOF ASSEMBLY - SEE 5A/A9.1

ENSURE NEW MUFFLER ASSEMBLY EXHAUST

POINT IS AT LEAST 10' - 0" AWAY (HORIZONTALLY)

FROM GRAVITY VENTILATOR

MUFFLER AND EXHAUST SUPPORT

CURBS - QTY DETERMINED BY

MUFFLER PROVIDER

JOIST BELOW DECK

L R

G ro u p

REVISIONS

KEY PLAN

A B C D E F

O Y

A R

E G

A L G

E N

E R

A T

O R

R E

P L A

C E

M E

N T

R O

G U

E V

A L L

E Y

Y O

U T

H C

O R

R E

C T

A L F

A C

O R

E G

O N

Y O

U T

H A

U T

H O

Y N

E F

S T

R A

N T

S P

A S

S O

NORTH

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

ROGUE VALLEY -

ROOF PLANS

A3.1RV

SCALE: 1/4" = 1'-0"A3.1RV

4A ROGUE VALLEY - DEMO ROOF PLAN

SCALE: 1/4" = 1'-0"A3.1RV

4C ROGUE VALLEY - ROOF PLAN

N N

REVISIONS

07/11/2023

CD OWNER

REVIEW

CONSTRUCTION

DOCUMENTS

tgovreau Polygon tgovreau Snapshot tgovreau Snapshot tgovreau Snapshot tgovreau Snapshot tgovreau Polygon tgovreau Snapshot tgovreau Snapshot tgovreau Snapshot tgovreau Snapshot tgovreau Polygon tgovreau Snapshot tgovreau Polygon tgovreau Snapshot tgovreau Line

2.OC

C.OCC.OC

3.OC

1.OC

D.OC

B.OCB.OC

A.OCA.OC

INTERIOR COURTYARD SIDEEXTERIOR FIRE LANE SIDE

STAFF ENTRANCE FROM FIRE LANE

AREA OF WORK

2 2

(EXST)

CLASSROOM

A229

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

(EXST)

CORRIDOR

(EXST)

PERSONNEL

SALLYPORT

(EXST)

DUMPSTER

PAD

(EXST) OFFICE

(EXST) WORK

AREA

(EXST)

RECEPTION

(EXST) LOBBY

(EXST)

CONFERENCE /

VISIT ROOM

(EXST)

CONTROL

(EXST)

CONFERENCE

(EXST)

ADMITTING

(EXST)

SALLYPORT

(EXST)

HOLDING

(EXST)

HOLDING

(EXST)

CORRIDOR (EXST)

STORAGE

(EXST)

STORAGE

(EXST) VISIT /

WAIT

(EXST)

HOLDING

(EXST)

HOLDING

(EXST) TOILET

(EXST) OFFICE

(EXST)

SECURE FILES

(EXST) OFFICE

(EXST)

CORRIDOR

(EXST) OFFICE (EXST)

STORAGE

(EXST)

WAITING(EXST) OFFICE

(EXST)

SHOWER

(EXST) TOILET

EXTERIOR FIRE LANE SIDE INTERIOR COURTYARD SIDE

GENERATOR ROOM

T E

M P

O R

A R

Y S

E C

U R

G R

A M

T E

M P

O R

A R

Y S

E C

U R

G R

A M

(EXST)

MECHANICAL

ROOM

(EXST)

ELECTRICAL

ROOM

(EXST) LIFE

SAFETY

(EXST)

STORAGE

(EXST)

GENERATOR

ROOM

(EXST) OFFICE

(EXST) LOW

VOLTAGE

FB1

F B

FB2

F B

MAINTAIN EXISTING

1-HR OCCUPANCY

SEPARATION WALL

2 HOUR OCCUPANCY

SEPARATION WALL

MAINTAIN EXISTING

2-HR RATED WALL

F B

FB1

FB1: 1-HOUR OCCUPANCY FIRE SEPARATION WALL

FB2: 2-HOUR OCCUPANCY FIRE SEPARATION WALL

FIRE BARRIER LEGEND

(EXST) CLASSROOM

A1.1OC

SW2

S W

SW1

S W

SW2

S W

SW1

S W

SW1

S W

SW1

S W

SW1

S W

SW1

S W

SW1

S W

SW1

S W

SW1

S W

SW2

SW2 SW2

S W

SW2

S W

SW2

S W

SW2

SW3

S W

SW3

EXTERIOR FIRE LANE SIDE INTERIOR COURTYARD SIDE

(EXST) GENERATOR

ROOM

(EXST) MECHANICAL ROOM

(EXST) ELECTRICAL ROOM

(EXST) LIFE SAFETY

(EXST) LOW VOLTAGE ROOM

(EXST) STORAGE

(EXST) CLASSROOM

(EXST) OFFICE

SW2 SECONDARY SECURITY WALLS

(Restraint / Staff Protection)

SW3 TERTIARY SECURITY WALLS

SW1 PRIMARY SECURITY WALLS

(Glass / Mech / Hardware / Movement Doors

SECURITY WALL LEGEND

A1.1OC

TEMPORARY SECURITY NOTES

TO MAINTAIN 2-LOCKABLE-DOOR SECURITY SEPARATION

BETWEEN YOUTH CORRECTIONAL FACILITY AND EXTERIOR AT

ALL TIMES, THE CONTRACTOR SHALL FOLLOW THE NECESSARY

STEPS TO ACCESS AND SECURE THE AREA OF WORK DURING

CONSTRUCTION:

1. INITIALLY, CONTRACTOR TO GO THROUGH STAFF ENTRANCE

AND PERSONNEL SALLYPORT (MUST BE BUZZED IN BY

OREGON YOUTH AUTHORITY SECURITY CONTROL, WITH

PERMISSION FROM AUTHORIZED FIELD REPRESENTATIVE).

2. OREGON YOUTH AUTHORITY SECURITY CONTROL CAN OPEN

BOTH DOORS OF THE PERSONNEL SALLYPORT IF/WHEN THE

INTERIOR COURTYARD IS CLEARED, TO ALLOW

CONTRACTOR TO TRANSPORT CONTRUCTION TOOLS AND

MATERIALS.

3. ONCE INSIDE THE DESIGNATED AREA OF WORK,

CONTRACTOR TO ERECT A LOCKOUT DOOR, IN PLACE OF

REMOVED LOUVER, SO THAT THE LOCKABLE DOOR CANNOT

BE OPENED FROM THE GENERATOR ROOM SIDE. LOCKOUT

DOOR MUST BE UNLOCKED FROM THE EXTERIOR SIDE (FIRE

LANE SIDE OF THE DOOR) ONLY. CONTRACTOR TO ALSO

ERECT TEMPORARY WALL AND LOCKABLE DOOR IN EXISTING

STORAGE ROOM.

A. INTERIOR SECURITY WALL 3A TO HAVE 5/8" PLYWOOD

SHEATHING ON BOTH SIDES OF STUD, SET AT 12"

CENTERS. TEMPORARY SECURITY DOOR TO BE

SECURED WITH A PAD-LOCK AND SECURITY

FASTENERS.

B. CONSTRUCT TEMPORARY WALL 3B AS A 90 DEGREE

WALL RETURNING BACK TO ROOM A231. TEMPORARY

WALL 3C TO BE A SHEET OF 3/4" PLYWOOD,

SCREWED DIRECTLY INTO THE STORAGE RACKS IN

THE ROOM (SEE PHOTO OF STORAGE RACK AND

DOOR INTO A231).

C. CONSTRUCT TEMPORARY WALL 3C AFTER

TEMPORARY GENERATOR IS INSTALLED AND

ACCEPTED FOR USE. TEMPORARY WALL 3B TO HAVE

5/8" PLYWOOD SHEATHING ON BOTH SIDES OF STUD,

SET AT 12" CENTERS. TEMPORARY SECURITY DOOR

TO BE SECURED WITH PAD-LOCK AND SECURITY

FASTENERS.

4. ONCE LOCKOUT DOORS/TEMPORARY WALLS ARE

ESTABLISHED, CONTRACTOR CAN USE THEIR OWN KEYS TO

UNLOCK THE TEMPORARY LOCKABLE DOORS AND ACCESS

THE GENERATOR ROOM FROM THE EXTERIOR SIDE (FIRE

LANE SIDE). CONTRACTOR TO CARRY OUT WORK IN

HATCHED AREA, AS NEEDED.

5. DOOR BETWEEN ROOM A230 AND ROOM A229 IS TO REMAIN

LOCKED AT ALL TIMES, EXCEPT AS APPROVED BY OWNER.

6. ALL OTHER SPACES ACCESSED BY OWNER ESCORT, ONLY.

7. AFTER NEW GENERATOR AND EXTERIOR OPERABLE WALL

LOUVER IS INSTALLED, USE ROUTE NUMBER 1 FOR THE

REMAINDER OF THE PROJECT.

8. CONTRACTOR TO ENSURE ROOF OPENING IS SECURED WITH

PLYWOOD AT THE THE END OF EACH DAY.

9. FOR EACH LOCATION, CONTRACTOR SHALL WORK WITH

OWNER TO DETERMINE THE BEST LOCATION AND MEANS OF

INSTALLING/SECURING TEMPORARY WALLS AND CEILINGS.

SECURITY & FIRE WALL LEGEND

SW2: SECONDARY SECURITY WALLS

(Restraint/Staff Protection)

SW1: PRIMARY SECURITY WALLS

(Glass / Mech / Hardware / Movement Doors)

FB2: 2-HOUR OCCUPANCY

FIRE SEPARATION WALL

FB1: 1-HOUR OCCUPANCY

FIRE SEPARATION WALL

SW3: TERTIARY SECURITY WALLS

STORAGE RACK & DOOR A231

ROOM A231

EXISTING STORAGE RACK

L R

G ro u p

REVISIONS

KEY PLAN

A B C D E F

O Y

A R

E G

A L G

E N

E R

A T

O R

R E

P L A

C E

M E

N T

O A

K C

R E

E K

Y O

U T

H C

O R

R E

C T

A L F

A C

A L

T E

R N

A T

E N

O R

E G

O N

Y O

U T

H A

U T

H O

Y L

O C

H N

E R

R O

A D

S E

A L B

A N

Y O

NORTH

A u to d e s k D o c s /7

-2

-0

Y A

R e g io n a l G e n e ra to r

R e p la c e m e n t/

-2

-0

O Y

A G e n e ra to r_ A

.r v t

#74-23108-00

JULY 11, 2023

CONSTRUCTION

DOCUMENTS

OAK CREEK -

ORIENTATION &

CODE PLANS

A0.1OC

SCALE: 1/16" = 1'-0"A0.1OC

3D OAK CREEK - TEMPORARY SECURITY PLAN

SCALE: 1/32" = 1'-0"A0.1OC

5D OAK CREEK - ORIENTATION PLAN

SCALE: 1/32" = 1'-0"A0.1OC

3A OAK CREEK - FIRE SEPARATION DIAGRAM

SCALE: 1/32" = 1'-0"A0.1OC

5B OAK CREEK - SECURITY SEPARATION DIAGRAM

N N

REVISIONS

07/11/2023

CD OWNER

REVIEW

METAL BACKING PLATE IN METAL STUD PARTITIONS FOR THE

PROPER ANCHORAGE OF ALL WALL ATTACHED ITEMS; I.E.

TOILET ACCESSORIES, CASEWORK, MILLWORK, WALL-

MOUNTED FIXTURES, MARKER BOARDS, TACK BOARDS, DOOR

STOPS, AUDIO VISUAL BRACKETS, AND OTHER WALL ATTACHED

ITEMS.

2. SCRIBE GYPSUM WALL BOARD OF WALLS AND PARTITIONS TO

IRREGULARITIES OF DECK ABOVE. SEAL TIGHTLY AROUND ALL

PENETRATIONS.

(EXST)

CLASSROOM

A229

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

A1.1OC 5E

2.OC

A1.4OC

A1.1OC

C.OCC.OC

3.OC

1.OC

D.OCD.OC

B.OCB.OC

A.OC

"17' - 10"

18' - 7" 17' - 11"

OFFICE WAITINGEXAMEXAM

MATCHLINE A

MATCHLINE B MATCHLINE B

INSTALL OPERABLE

WALL LOUVER

OVERHEAD JOIST

GRAVITY VENTILATOR

ROUGH OPENING ABOVE

TOILETSHOWER

BRACED FRAME

GENERATOR

ASSEMBLY

CENTER GENERATOR

AND LOUVER AT

ROOM CENTERLINE

A9.1

INSTALL NEW CONC. EQUIPMENT

PAD TO MATCH NEW GENERATOR

PAD REQUIREMENTS

A9.1

(EXST) MUFFLER/EXHAUST

ASSEMBLY PENETRATION TO

REMAIN

1' - 10"

E Q

VIF

2' - 0" 12' - 11 1/2" 3' - 0" MIN.

E Q

DOCKING STATION -

SEE ELECTRICAL

FUEL FILL PANEL -

SEE ELECTRICAL

DEMOLITION GENERAL NOTES

THE CONTRACTOR SHALL:

A. COORDINATE ALL DEMOLITION AND PHASING EFFORTS WITH THE

OWNER’S REPRESENTATIVE. EVERY EFFORT SHALL BE MADE TO

MINIMIZE DISRUPTION OF OWNER’S OPERATIONS. EXCESSIVE

NOISE OR VIBRATION SHALL BE PRE-APPROVED AND

COORDINATED WITH THE OWNER’S REPRESENTATIVE. IN ALL

CASES, PROVISIONS SHALL BE MADE FOR USER’S SAFETY.

B. COORDINATE ANY DISRUPTION OF UTILITY SERVICES WITH THE

OWNER AND AS SPECIFIED.

C. CONSTRUCT TEMPORARY CONSTRUCTION PARTITIONS WITHIN

THE EXISTING BUILDING WHICH OFFER A ONE-HOUR ENCLOSURE

TO ISOLATE ANY DEMOLITION/CONSTRUCTION WORK FROM THE

GENERAL PUBLIC AND AS DEEMED NECESSARY BY THE OWNER

AND CODE OFFICIAL HAVING JURISDICTION. COORDINATE

LOCATIONS WITH THE OWNER AND MAINTAIN MEANS OF EGRESS

THROUGHOUT THE WORK.

D. MAINTAIN A SECURE, WEATHER-TIGHT ENCLOSURE AT ALL

TIMES.

E. VERIFY ALL EXISTING CONDITIONS, DIMENSIONS AND

ELEVATIONS AND NOTIFY THE ARCHITECT OF ANY

DISCREPANCIES.

F. REMOVE IN THEIR ENTIRETY ALL ITEMS, AS REQUIRED TO

EXECUTE THE DEMOLITION/CONSTRUCTION WORK DESCRIBED

BY THE DRAWINGS.

G. THE OWNER SHALL RESERVE THE RIGHT TO SALVAGE ANY

MATERIALS.

H. PROVIDE PROTECTION FOR ALL EXISTING BUILDING MATERIALS

AND EQUIPMENT FROM DAMAGE DUE TO ANY DEMOLITION OR

CONSTRUCTION-RELATED INCIDENT PERFORMED UNDER THIS

CONTRACT.

I. REPAIR OR REPLACE ITEMS THAT ARE DAMAGED AS A RESULT

OF DEMOLITION OR CONSTRUCTION TO MATCH EXISTING FINISH

AND/OR CONDITION.

J. EXISTING MATERIALS SHALL NOT BE REUSED UNLESS NOTED

OTHERWISE OR AS AUTHORIZED BY ARCHITECT.

K. VERIFY AND MAINTAIN THE LOCATION OF EXISTING POWER,

COMMUNICATION AND DATA CABLES TO PREVENT

INTERRUPTION OF THEIR SERVICE.

L. PATCH FLOOR, WALL AND CEILING PENETRATIONS RESULTING

FROM REMOVAL OR RE-ROUTING OF NEW OR EXISTING PIPING,

DUCTWORK, CONDUIT, AND OTHER ITEMS, AS REQUIRED TO

MAINTAIN FIRE-RESISTANCE-RATED SEPARATIONS. FINISH AS

REQUIRED FOR NEW OR EXISTING ADJACENT SURFACES.

M. CAP ALL DISCONNECTED MECHANICAL PIPING LINES WITHIN THE

WALL OR FLOOR. PATCH AND FINISH AS REQUIRED TO MATCH

NEW OR EXISTING ADJACENT SURFACES.

N. SEE MECHANICAL AND ELECTRICAL DRAWINGS AND NOTES FOR

FURTHER SEQUENCING AND SCOPE OF WORK.

O. WHERE PLASTER/STUD WALLS ARE INDICATED TO BE REMOVED,

PREPARE ADJACENT WALLS TO RECEIVE NEW PATCH/FINISH BY

SAWCUTTING ADJACENT PLASTER FINISH A MINIMUM OF 1'-0"

BEYOND DEMOLITION.

DEMOLITION NOTES APPLY TO ALL DEMOLITION SHEETS.

T .O

T U

A1.4OC

B.OCA.OC

OPERABLE WALL

LOUVER

INFILL WALL

1' - 8 1/4" VIF 10' - 2" VIF 7' - 0" VIF

DOCKING STATION -

SEE ELEC.

FUEL FILL PANEL - SEE ELEC.

(PROVIDE BLOCKING FOR FUEL

FILL PANEL ATTACHMENT)

EXISTING DOWNSPOUT

TO REMAIN

A1.4OC

A9.1

A1.4OC

EXST REVEALS TO REMAIN

A1.4OC

B.OCA.OC

23' - 11"

EQ EQ EQ

VIF

1' - 6 1/2" (+/-)

4' - 0"

12' - 11 3/4" (+/-) VIF

NEW

GENERATOR

ASSEMBLY

MUFFLER

ASSEMBLY

GRAVITY

VENTILATOR

BEYOND

VIF

1' - 8"

VIF

3' - 8 5/8" (+/-)

' 1

M A

T C

N E

EQ EQ

A9.1

MIN.

0' - 6"

MIN.

0' - 6"

M A

NOTE: INSTALL NEW CONC.

EQUIPMENT PAD TO MATCH NEW

GENERATOR PAD REQUIREMENTS

A1.1OC 5E

2.OC

A1.4OC

A1.1OC

C.OCC.OC

3.OC

1.OC

D.OCD.OC

B.OCB.OC

A.OC

(EXST)

CLASSROOM

A229

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

1' - 8" VIF

9' - 0" VIF 7' - 2" VIF

18' - 7" 17' - 11"

OFFICE WAITINGEXAMEXAM

MATCHLINE A MATCHLINE A

MATCHLINE B MATCHLINE B

EXISTING MUFFLER PENETRATION

ABOVE TO REMAIN - SEE RCP FOR

LOCATION

(EXST) OVERHEAD JOIST

REMOVE (EXST) GENERATOR

ASSEMBLY, DUCTWORK, MUFFLER,

AND ASSOCIATED CONC. EQUIP. PAD

REMOVE EXISTING LOUVER

A9.1

(EXST) OVERHEAD JOIST

(EXST) BRACED FRAME

(EXST) OVERHEAD JOIST

17' - 11 1/2" VIF

DEMO ATTACHED

SHROUD

REMOVE AND REPLACE EXST CEILING & WALL ASSEMBLIES TO

INSTALL JOIST REINFORCEMENTS - SEE RCPs & DETAIL A5/A9.1

2.OC

C.OCC.OC

3.OC

1.OC

D.OCD.OC

B.OCB.OC

A.OC

(EXST)

CLASSROOM

A229

(EXST)

MECHANICAL

ROOM

A236

(EXST) LIFE

SAFETY

A231

(EXST)

ELECTRICAL

ROOM

A230

(EXST)

STORAGE

A232

(EXST)

GENERATOR

ROOM

A235

(EXST) OFFICE

A234

(EXST) LOW

VOLTAGE

A233

MATCHLINE…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Apr 3, 2024.