Attachment A - Scope of Work.pdf
PDF 135 KB Posted
- Attached to
- Fuel Oil Analytical Testing Services
- Solicitation number
- SJ479099
- Issued by
-
Department of Energy Office of Science
About this file
This is a Statement of Work (SOW) for analytical fuel oil testing services required by Brookhaven National Laboratory for building B610, prepared by K. Scholtz, Administrator of the Energy and Utilities Division, and dated May 5, 2026.
The contractor is required to perform regulatory fuel oil testing at their own laboratory facility, including five tests of #2 fuel oil and three tests of #4 fuel oil, with all testing required by New York State Department of Environmental Conservation (NYSDEC). Samples will be collected from designated fuel tanks or during fuel deliveries on site, labeled by Brookhaven personnel, and transmitted to the contractor's lab for analysis. Testing must comply with specific ASTM standards including ASTM D2622 or D4294 for sulfur content (%S), ASTM D240 for BTU measurement, ASTM D976 for cetane (diesel), and ASTM 5762 for nitrogen content (%N2) across both fuel oil grades. The contractor must ensure environmental compliance regarding sample disposal and retention, and analysis must be completed within a reasonable timeframe. The work supports quarterly reporting obligations to NYSDEC. Peter Picciano, Steam Plant Supervisor, reviewed and approved the SOW.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Enclosure E - W-9 Form (Domestic Vendors).pdf | ||
| RFQ SJ479099.pdf | ||
| Enclosure A Draft PO (1).PDF | ||
| Enclosure C AMS-043.pdf | ||
| Enclosure D Vendor ACH Authorization Form.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Fuel Oil Testing of#2 and #4 Oil for B610 At Brookhaven National Laboratory
May 2026
Statement of Work (SOW) Overview:
Perform analytical fuel oil testing for B610 required by NYSDEC, quarterly reporting. Tests to be completed at Contractor's lab.
Description of Work:
The testing shall include, but will not be limited to the following:
• Regulatory Fuel Oil Testing of #2 oil (5 tests)
• Regulatory Fuel Oil Testing of #4 oil (3 tests)
• Testing required by NYSDEC
• Samples will be taken from the designated fuel tanks or during fuel deliveries on site, labeled and sent to the Contractor's Lab for analysis.
Safety Requirements:
• Environmental Compliance (Sample Disposal & Retention)
Timeline:
• Tests will be performed and confirmed analysis will be completed at a reasonable time.
Tech. Rep.:
Standards:
%S = ASTM D2622 or ASTM D4294 (F.O. #2);
%S = ASTM D2622 or 4294 (F.O. #4);
BTU - ASTM D240 (F.O. #2);
BTU - ASTM D240 (F.O. #4);
Cetane - ASTM D976 (Diesel);
%N2 ASTM 5762 (F.O. #2);
%N2 ASTM 5762 (F.O. #4).
File details come from the government source that posted it. Updated .