Attachment A- Location of the FORGE Site_new v2.pdf
PDF 863 KB Posted
- Attached to
- Utah FORGE makeup water pump rental
- Solicitation number
- UU208321710
- Issued by
- Salt Lake County, Utah
About this file
This document is an attachment detailing the location and well specifications for the Utah FORGE (Frontier Observatory for Research in Geothermal Energy) site located approximately 10 miles northeast of Milford, Utah. The document provides precise directions to the site from Milford, involving a 10.6-mile route across multiple roads including UT-257, Geothermal Plant Road, Antelope Point Road, and Salt Cove Road. A detailed map illustrates the site's location within Utah, with an inset showing the specific area near Milford.
The attachment includes a comprehensive table of seven well locations (16A(78)-32, 16B(78)-32, 56-32, 58-32, 78-32, 78B-32, and 68-32), providing their exact geographical coordinates using WGS84 datum and NAD83 UTM values. Each well is positioned with precise latitude, longitude, and elevation measurements, ranging from 1,650.0 to 1,705.6 meters above sea level. The accompanying aerial image depicts the well sites, indicating various purposes such as production, injection, seismic monitoring, and a pilot well, with distances and directional indicators to help orient viewers.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment C Cost Proposal Utah FORGE Makeup Water Pump Rental.xlsx | XLSX spreadsheet | |
| Attachment B Mandatory Requirements Checklist Utah FORGE Makeup Water Pump Rental v2.docx | DOCX document | |
| IFB UU208321710 Utah FORGE Makeup Water Pump Rental.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment A
Location of the Utah FORGE site
Directions to Location
The Utah FORGE is located 217 miles south of Salt Lake City and 10 miles NNE of Milford, UT.
Figure 1 shows the location of the Utah FORGE site in relation to Milford, UT. Starting from the intersection of UT-257 and UT-24 in Milford, directions and approximate mileages to the FORGE site are as follows:
1) Take UT-257 north for 4.4 miles.
2) Turn right (east) onto Geothermal Plant Road and continue for 2.7 miles.
3) Turn left (northeast) onto Antelope Point Road (paved) and continue for 3.5 miles.
4) Turn right (east) onto Salt Cove Road (well graded dirt road) and continue to the wellsite locations, following posted signs.
Figure 1. Utah FORGE general location. The inset is a zoomed in view starting from Milford, UT to the southwest in the inset (north is up).
Well Location
Figure 2.
Table 1: Utah FORGE wellhead locations. Lat/Lon data use the WGS84 datum, and the UTM values use NAD83.
Well Easting (X) Northing (Y) Latitude Longitude Elevation (m)
16A(78)-32 334641.19 4263443.69 38.50402147 -112.8963897 1650.0
16B(78)-32 334642.72 4263479.52 38.50434511 -112.8963803 1650.7
56-32 335504.28 4263426.19 38.50402364 -112.8864923 1661.7
58-32 335450.99 4263037.91 38.50051644 -112.8870119 1684.8
78-32 335780.84 4262991.99 38.50016375 -112.8832204 1701.9
78B-32 335865.45 4262983.53 38.50010313 -112.8822486 1705.6
68-32 335485.75 4263154.53 38.50157333 -112.8866409 1685.7
File details come from the government source that posted it. Updated .