Attachment 4 Technical Capability Certs Form.docx

N42158-21-Q-0046 Attachment 6

TECHNICAL CAPABILITY CERTIFICATIONS

Vendor shall self-certify that the equipment and services proposed either meets or does not meet the Government’s minimum requirements specified in the associated Statement of Work (SOW) reference by initialing in the “YES” or “NO” area of the chart below.

Any deviation to the Government specifications shall be identified as such – A detailed explanation shall be provided for each negative response.

Note: In order to be considered for award, the table must be completed in its entirety and submitted with your quotation in accordance with FAR 52.212-1 Instructions of Offeror’s ADDENDUM.

Technical Capabilities Statement

Items listed in Section 3 Table 1 of PWS

Capable of Repairing and maintain equipment to meet or exceed OEM specification

Capable of preforming Laser Level, Alignment, and Calibration on machines listed in table A

Capable of preforming Machine Inspections/Evaluations on machines listed in table A

Capable of sourcing repair parts for all machines listed in table A directly from the OEM

Technicians have been factory trained by FANUC

Technicians have been trained in Advanced Fanuc Troubleshooting

Capable responding to Emergency Break-Down repairs within 24 hours

Access to a field technician with a minimum of five years’ experience in machine tool repair

Capable of sourcing manuals, drawings and specifications from OEM of machines listed in table A

In order to be considered technically acceptable, this form must be completed in its entirety.

Vendor shall certify that his product meets or does not meet each specification listed above by initialing in the applicable YES or NO box beside each specification.

Print Name Signature

Vendor’s Certification is as of __________________.

Date

Company Name