Attachment 3 - Simulator Trailer_Salient Characteristics.pdf

SALIENT CHARACTERISTICS

341st RCS Mobile Recruiting Center Trailer

Description:

The 341st Recruiting Squadron (RCS) requires one (1) CellTech cargo trailer configured as a complete mobile platform for flight-simulation equipment and mobile recruiting operations. The trailer shall be delivered fully assembled and configured from the manufacturer with the following specifications:

1. Dimensions / Capacities

1.1 9 ft exterior width (maximum)

1.2 20 ft total length (maximum)

1.3 7 ft interior height (minimum)

1.4 Interior capacity to accommodate two (2) flight simulators, each weighing 400 lbs , measuring 8 ft L x

3 ft 10 in W, with a minimum separation of 3 ft between simulators.

1.5 Flat-front configuration

1.6 12-inch-on-center crossmembers

1.7 Heavy-duty construction suitable for repeated highway transportation

1.8 Two (2) 5,200-lb axles

1.9 Steel 6-lug wheel configuration

1.10 Stabilization system

1.10.1 Scissor jack stabilization system or equivalent

1.10.2 5,000-lb support capacity

1.10.3 2,500-lb lifting capacity

2. Towing / Coupling Equipment

2.1 Electric trailer braking system appropriate for trailer dimensions / full weight

2.2 DOT-compliant exterior lighting, reflectors, and transportation safety equipment.

2.3 Federal Motor Carrier Safety Administration (FMCSA) compliant towing, coupling, and safety devices for trailer of above specifications

3. Exterior Requirements

3.1 All Steel panel construction

3.2 Rivetless assembly for heat retention / minimized moisture intrusion

3.3 Panel skins constructed from hot-dipped galvanized 80 ksi steel.

3.4 Anti-corrosion primer and polyester topcoat for heat retention / minimized moisture intrusion

4. Imbedded Trailer Equipment

4.1 Rear Door

4.1.1 Single rear ramp door suitable for loading and unloading flight-simulation and training equipment.

4.1.2 Transition flap between the trailer floor and ramp.

4.1.3 Slip-resistant walking/loading surface.

4.1.4 Removable safety railing system while rear ramp door is open

4.2 Stage Door

4.2.1 One (1) fold-down stage-door on side wall of trailer

4.2.2 Removable safety railing system for border of stage

4.2.3 Spring/cable-assisted deployment system

4.2.4 Stable platform with multi – person weight capacity

4.2.5 Slip-resistant walking surface.

4.2.6 Appropriate lower support when deployed.

4.3 Walk-on deck/raised deck over the applicable wheel-well area as required by the configured training layout.

4.4 System for securing stage and railing components during highway transportation.

4.5 15,000 BTU air-conditioning system.

4.5.1 Minimum rated cooling capacity: 15,000 BTU per hour.

4.5.2 Shall be compatible with the trailer's electrical system.

4.5.3 Installation shall not interfere with stage, ramp, cabinetry, audiovisual equipment, flight simulator, or emergency exits

5. Electrical System

5.1 50-amp electrical service/package.

5.2 Four (4) 120V electrical receptacles (minimum)

5.3 Two (2) 4-ft LED 120V interior light fixtures (minimum)

5.4 One (1) wall-mounted light switch (minimum)

5.5 One (1) 25-ft female shoreline/shore-power cable (minimum)

5.6 Electrician-certified panels, breakers, DC/AC conversion, and all other protective equipment necessary to run above equipment in the above configuration

6. Interior Requirements

6.1 Anti-skid/anti-slip floor grip treatment suitable for heavy foot traffic

6.2 Dedicated interior space for 2x Flight Simulators

6.2.1 Sufficient clearance for equipment and personnel using equipment

6.2.2 120V electrical receptacles capable of supporting simulator power needs

6.3 Appropriate space for associated audiovisual and instructional equipment.

6.4 Floor plan allowing for maximal foot traffic during simulator usage

6.5 Interior Storage

6.5.1 Upper-mounted, paneled two-door storage cabinet, dimensions 72" W x 18" H x 16" D (minimum)

6.5.2 Secure mounting suitable for highway transportation.

6.6 Television Mount

6.6.1 Fold-down mount rated and sized for 75-inch television

6.6.2 120V receptacle colocated with mount

6.6.3 Locking mechanism integrated in mount for transportation

7. Exterior Equipment

7.1 Dedicated generator box with removable cover

7.2 Exterior retractable awning on side wall of trailer opposing retractable stage

7.3 Block-style or folding step for personnel entry / exit

8. Exterior Identification

8.1 Roof sign board suitable for Government-approved identification, branding, or training graphics.

8.2 Government shall coordinate final identification specifications prior to implementation

9. The complete CellTech Flight Simulation Training Trailer shall have a required build-out and delivery timeframe of 6-8 weeks.

10. Documentation: Contractor shall provide the following documentation

10.1 Trailer operating documentation

10.2 Electrical system documentation

10.3 HVAC operation documentation

10.4 Instructions for use of imbedded trailer equipment (ramp door, stage, railing, step, awning)

10.5 Recommended routine maintenance / intervals information

11. Warranty

11.1 Manufacturer shall provide 5 year (minimum) limited / unlimited warranty for trailer frame

11.2 Manufacturer is not responsible for warranty of third party equipment installed on trailer