Attachment 3 - Salient Characteristics.pdf
PDF 264 KB Posted
- Attached to
- Abrasive Cutting Waterjet System
- Solicitation number
- 70Z03825QK0000022
About this file
Attachment 3 is a detailed specification document for an Abrasive Cutting Waterjet System for the U.S. Coast Guard Aviation Logistics Center. The system requires a steel construction waterjet cutter with specific technical capabilities, including 2D and 3D cutting, a work area of 126" wide x 256" long, a maximum height of 10', and an operating weight of 21,500 lbs. Key specifications include a fully programmable servo-drive Z-Axis, "C" gantry design, automatic taper compensation, a 900 lb abrasive delivery system, UltraPierce technology, and a closed-loop filtration system.
The document outlines a MotoJet intensifier pump with 30 hp, 4150 bar pressure, variable pressure control, and a modular design. The system requires a technology package including Waterjet Connect software and must support .dxf and .ord file types. Maintenance and warranty provisions include 2,000 hours of pump runtime for up to two years, an intensifier exchange program, preventative onsite service, and training. Standard features include a one-year warranty, real-time data access, start-up and installation support, and English-language manuals for operators, parts, and service.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
U.S. Coast Guard
Aviation Logistics Center
ATTACHMENT 3 –
SALIENT CHARACTERISTICS FOR AN ABRASIVE CUTTING WATERJET SYSTEM
Salient Characteristics
1. General:
a. Abrasive Cutting Waterjet Sytem for 2D and 3D cutting
b. Max footprint w/ pump -15’1” x 8’9”
c. Work area not to exceed 126” wide x 256” long
d. Max Height – 10’
e. Operating Weight – 21,500 lb
f. Work Envelope – 10’ x 6’6”
g. Steel Construction
2. Specifications
a. Fully programmable servo-drive Z-Axis
b. “C” gantry design
c. Automatic taper compensation to allow for adjustments based on material type, speed and finish
d. 900 lb. abrasive delivery system
e. Roll-around control software
f. Water-only cutting kit
g. UltraPierce technology (Allows the user to pierce holes in brittle and or composite materials)
h. Ebbco Closed Loop Filtration System with chiller for HyPlex (Allows user to operate without discharge of water to the drain. Chiller enables water to rapidly cool)
i. Abrasive Transfer System
j. Laser Edge Finder
k. Low-Profile fixture clamps
l. Item Unique Identification-IUID labeling per MIL-STD-130
3. Pump
a. MotoJet intensifier pump-30 hp, 4150 bar (60,000 psi); X Version
b. Variable pressure control
c. Modular design
d. Full enclosure with sound deadening and LED diagnostics
4. Electric
a. 3-Phase 380-480 VAC
5. Technology Package
a. Waterjet Connect iQ, Waterjet Connect, FlowXPERT Infinity and FlowCUT software
b. Machine software must support .dxf and .ord file types
6. Waterjet Maintenance, Warranty and Training
a. 2,000 hours of pump runtime for up to two (2) years
b. Intensifier Exchange Program to reduce downtime
c. Preventative onsite service and/or training visits (operator and maintenance training)
d. Additional one (1) year warranty to cover a total of two (2) years with included warranty for up to 4,000 hours from ship date of machine
7. Standard Features:
a. One (1) year warranty included warranty
b. Access data in real time
c. Start-up, installation and training
d. Operator Manual - English
e. Parts Manual - English
f. Service Manual – English
File details come from the government source that posted it. Updated .