Attachment 3 - Packaging Requirements.pdf
PDF 221 KB Posted
- Attached to
- HH-60W Ux Validator II Test Set Repair Federal contract opportunity
- Solicitation number
- FA8552-24-R-0005
About this file
This document is the Packaging Requirements Form AFMC Form 158, which provides detailed instructions for the packaging and marking requirements for a set of test equipment associated with a federal contract opportunity.
The key details are:
- The contract requires the delivery of four different types of test equipment for the HH-60W helicopter, including the T70X Engine Test Set, Ux Validator Series II Set, Blade Burn Set, and Stab Position Sensor/Limit Switch Set.
- The packaging and marking requirements are specified in accordance with MIL-STD-2073-1 for military preservation and packing, or ASTM D3951 for commercial packaging.
- All wooden materials must comply with ISPM No. 15 for phytosanitary measures.
- The contract is a 10-year Indefinite Delivery Contract (IDC) with a projected annual quantity of 24 units per NSN.
- The required delivery time is 12 months after receipt of a funded order.
- The contract will be awarded to the sole source provider, Ultrax Aerospace, Inc., under the authority of 10 U.S.C. 2304(c)(1) for only one responsible source.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFP FA8552-24-R-0005 Amendment 0001.pdf | ||
| RFP FA8552-24-R-0005 UX Validator II.pdf | ||
| Attachment 4 - Transportation Data.pdf | ||
| Quality Assurance Surveillance Plan.pdf | ||
| Attachment 5 - Contract Data Requirements List.pdf | ||
| Attachment 2 - Quality Assurance Provisions.pdf | ||
| Attachment 6 - Government Furnished Property.pdf | ||
| Attachment 1 - Performance Work Statement.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
AFMC FORM 158, 20221014
CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES PACK
(X) (A/B)
COMMERCIAL
ASTM D3951
PACKPRES
(X) (X)
SPECIAL
PACKAGING
INSTRUCTION
NUMBER
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
A. ENGINEERED OR SPECIALIZED CONTAINER (CDRS) ITEM NAME(s) OR
NSN/MMAC
B. PACKAGING OF HAZARDOUS MATERIALS ITEM NAME(s) OR NSN/ MMAC FAR Clause 52.223-3, Hazardous Material Identification and Material Safety Data
C. PACKAGING DATA (Coded and/or Special Packaging Instructions) ITEM NAME(s) OR NSN/MMAC FAR Clause 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in Acquisition Streamlining and Standardization Information System
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
ORGANIZATION PACKAGING SPECIALIST (Typed Name)
QUP ICQ MOP CD CT
UNIT
CONT
INT
CONT
UCL SPECIAL
MARKINGS
UNIT
PACK
WEIGHT
UNIT
PACK
LENGTH
OPI
UNIT
PACK
WIIDTH
UNIT
PACK
DEPTH
UNIT
PACK
CUBE
PACKAGING SPECIALIST SIGNATURE DATE
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
ITEM(S)
CUSH
DUNN
WRAP
MTL
PRES
MTL
4920-01-708-1966
4920-01-708-6006
4920-01-708-1967
X
X
X
X
AFMC FORM 158, 20221014 Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special Packaging Instructions, apply.
File details come from the government source that posted it. Updated .