Attachment 3 B755 Drawings.pdf

PDF 5 MB Posted Mar 18, 2026

Attached to: Repair Doors and EIFS, B755 Federal contract opportunity
Solicitation number: FA663326Q0001
Issued by: Department of the Air Force Headquarters Secretary of the Air Force

About this file

Written by GovTribe AI · Mar 18, 2026

This is a Final Design document for a construction project at the 934th Airlift Wing, United States Air Force Reserve, located at 760 Military Highway, Minneapolis, Minnesota 55450-2100. The project, identified as QJKL 25-0008, addresses sustaining automatic doors and Exterior Insulation and Finish System (EIFS) repairs on Building 755, which houses the Army Air Force Exchange Service (AAFES) facility including a fueling station, retail sales, barber shop, and coffee shop that remains operational during construction.

The scope of work includes: replacement of door operators, controls, and sensors on three storefront doors using Stanley components; demolition and infilling of a double door opening on the north exterior with matching facebrick and EIFS; replacement of 14 wall pack lights with LED fixtures; comprehensive EIFS repair and recoating with Dryvit products including cleaning, patching, and application of Weatherlastic HB acrylic wall coating; relocation of a fuel tank level alarm conduit to interior routing; demolition of four floodlights and associated steel supports; and repairs to interior drywall. The project requires coordination with ongoing facility operations (AAFES hours 0900-1700 M-F, Coffee Shop 0600-1230 W-F) and includes provisions for contractor parking in grass areas, portable restroom facilities, and water access via existing hose bibs. All electrical work must be performed by Minnesota-licensed electricians on de-energized circuits with coordination of panel downtimes during duty hours. Ballast disposal and hazardous materials handling are the government's responsibility.

View the file

Other files for this federal contract opportunity

Other files attached to Repair Doors and EIFS, B755, newest first.
File	Type	Posted
SF 30 Offer Due 4-30-26 Amendment FA663326Q00010003.pdf	PDF	Apr 20, 2026
Offer Due Date 4-30-26 Amendment - FA663326Q00010003.pdf	PDF	Apr 20, 2026
SF 30 Offer Due Date Amendment FA663326Q00010002.pdf	PDF	Apr 14, 2026
Attachment 1 B755 Statement Of Work (SOW).pdf	PDF	Mar 18, 2026
Attachment 5 20260302 Wage Determination.pdf	PDF	Mar 18, 2026
Solicitation Amendment - FA663326Q00010001.pdf	PDF	Mar 18, 2026
Attachment 4 B755 Submittal Register.xlsx	XLSX spreadsheet	Mar 18, 2026
Attachment 2 B755 Specifications.pdf	PDF	Mar 18, 2026

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

VICINITY MAP

SCALE: N.T.S.

STATE OF MINNESOTA

SCALE: N.T.S.

p I-494

MINNEAPOLIS - SAINT PAUL

INTERNATIONAL AIRPORT

MSP ARS

D E

S C

N M

A R

H A

F T

G , U

S A

F R

R Y

H W

A Y

N E

A P

S , M

B U

H C

E N

E E

S U

S T

A U

T O

M A

D O

O R

S , B

-0

H E

E T

C D

D 1/

C D

T M

D w n by

D es ig ne d by

R ev ie w ed b y:

D at e:

R ev

S ub m itt ed b y:

A W

Sheet 1 of 6

SHEET ID:

T001

D A

T E

MINNEAPOLIS MINNESOTA

760 MILITARY HIGHWAY

55450-2100

934th AIRLIFT WING

UNITED STATES AIR FORCE RESERVE

SUSTAIN STORE FRONT DOORS & EIFS, B755

PROJECT # QJKL 25-0008

YING

VIKINGS

FINAL DESIGN

4 TH

T W

LRIA I

I F

SHEET # DESCRIPTION

T001 TITLE SHEET

G001 EXISTING PHOTOS

AD101 DEMO PLAN & OVERVIEW

AD201 EXTERIOR ELEVATIONS

A601 SCHEDULE

A602 DETAILS

PROJECT LOCATION

AutoCAD SHX Text

MINNEAPOLIS

AutoCAD SHX Text

SAINT PAUL

AutoCAD SHX Text

DULUTH

AutoCAD SHX Text

AIRPORT

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text W

AutoCAD SHX Text L

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text F

AutoCAD SHX Text

D E

S C

N M

A R

H A

F T

G , U

S A

F R

R Y

H W

A Y

N E

A P

B U

H C

E N

E E

S U

S T

A U

T O

M A

D O

O R

S , B

-0

P H

O T

O S

C D

D 1/

C D

T M

D w n by

D es ig ne d by

R ev ie w ed b y:

S ub m itt ed b y:

Sheet 2 of 6

G001

D A

T E

Scale: N.T.S.

BLDG 755 MAIN ENTRANCE (EAST ELEVATION)A Scale: N.T.S.

BIOLOGICAL GROWTH (NW CORNER)B Scale: N.T.S.

EIFS DAMAGEC

Scale: N.T.S.

FUEL TANK LEVEL ALARM CONDUITDScale: N.T.S.

FLOOD LIGHTSDScale: N.T.S.

WALL PACKD

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text W

AutoCAD SHX Text L

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text F

D E

S C

N M

A R

H A

F T

G , U

S A

F R

R Y

H W

A Y

N E

A P

B U

H C

E N

E E

S U

S T

A U

T O

M A

D O

O R

S , B

-0

D E

M O

O R

G E

N E

R A

L S

C O

P E

C D

D 1/

C D

T M

D w n by

D es ig ne d by

R ev ie w ed b y:

S ub m itt ed b y:

Sheet 3 of 6

AD101

D A

T E

GENERAL DEMOLITION NOTES:

1. BUILDING 755 IS THE ARMY AIR FORCE EXCHANGE

SERVICE (AAFES) AND CONSISTS OF A FUELING STATION,

RETAIL SALES, BARBER, AND COFFEE SHOP. THIS FACILITY

SUPPORTS BASE PERSONNEL AND RETIREES. PEDESTRIAN

TRAFFIC IS REGULAR DURING DUTY HOURS. THE FACILITY

WILL REMAIN OPEN DURING CONSTRUCTION THEREFORE

APPROPRIATE WARNING SIGNS, BARRIERS, OR CONES WILL

BE REQUIRED TO ISOLATE THE CONSTRUCTION AREA FROM

THE USERS AND VISITORS.

2. DUTY HOURS:

AAFES 0900-1700 M-F

COFFEE SHOP 0600-1230 W-F

AAFES IS ALSO OPEN 0900-1700 FOR AIR FORCE UNIT

TRAINING WEEKENDS (UTA/DRILL).

3. PARKING/LAYDOWN AREA

THE CONTRACTOR MAY USE THE GRASS AREAS AROUND

THE FACILITY FOR PARKING AND MATERIAL STORAGE.

COVERED STORAGE IS UNAVAILABLE ON SITE AND THE

CONTRACTOR IS RESPONSIBLE FOR PROTECTION OF

MATERIALS, TOOLS, AND EQUIPMENT.

4. CONSTRUCTION CLEAR ZONES

THE CONTRACTOR SHALL IDENTIFY CONSTRUCTION AREAS

WITH CAUTION TAPE, ROPE, CONES, OR SIGNS TO KEEP

FACILITY VISITORS AWAY FROM WORK AREAS.

5. RESTROOMS

RESTROOM FACILITIES WILL NOT BE AVAILABLE FOR

CONTRACTOR USE. CONTRACTOR WILL REQUIRE

PORTABLE FACILITIES. CONSULT THE PROJECT ENGINEER

FOR POSITIONING.

6. WATER SOURCE

HOSE BIBS ARE AVAILABLE FOR USE AROUND THE

FACILITY. SEE PROJECT ENGINEER TO OBTAIN VALVE KEY.

REPLACE DOOR OPERATORS, CONTROLS, &

SENSORS ON 3 STORE FRONT DOORS. SEE DOOR

SCHEDULE ON SHEET A601

Scale: N.T.S.

DEMO FLOOR PLAN & GENERAL SCOPEA

INFILL DOUBLE DOOR OPENING

REPLACE 14 WALL PACK LIGHTS (WP-1)

CLEAN, REPAIR, AND REFINISH THE ENTIRE

EXTERIOR INSULATION FINISH SYSTEM (EIFS)

THIS DOOR N.I.C. (RECENT REPAIR, CONFIGURE

OTHER 3 DOORS TO MATCH)

DEMOLISH 4 FLOOD LIGHTS AND MOUNTS (TYP) REPLACE DOOR AND FRAME

RELOCATE TANK ALARM CONDUIT

RELOCATE SIGN

TIME SW.

PNL SL

PNL AL

PNL AR

PNL B

PNL C

PNL D

PNL E

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text W

AutoCAD SHX Text L

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text F

UTILITY FACE BRICK

D w n by

D es ig ne d by

R ev ie w ed b y:

S ub m itt ed b y:

Sheet 4 of 6

D E

S C

N M

A R

H A

F T

G , U

S A

F R

R Y

H W

A Y

N E

A P

B U

H C

E N

E E

S U

S T

A U

T O

M A

D O

O R

S , B

-0

V A

N S

C D

D 1/

C D

T M

AD201

D A

T E

REPAIR KEY NOTES

REPLACE DOOR OPERATOR ASSEMBLIES ON 3 OF

THE 4 STOREFRONT DOORS (EXCLUDES THE NORTH

EXTERIOR DOOR WHICH WAS RECENTLY REPAIRED).

SEE SCHEDULE ON SHEET A601

DEMOLISH DOUBLE DOOR, FRAME, & AND EIFS

SECTION. FRAME OPENING WITH METAL STUDS;

INSULATE WITH FIBERGLASS BATTING; FACE

EXTERIOR WITH MATCHING FACE BRICK; FACE

INTERIOR WITH GYPSUM BD; TAPE, FINISH, AND

PAINT TO MATCH SURROUNDING. SEE DETAIL 7 ON

SHEET A602.

REMOVE COVER PLATE/LENS AND INTERNAL

COMPONENTS ON RECESSED WALL PACK LIGHTS (11

EA). HOUSING AND CONDUCTORS TO REMAIN.

FABRICATE ALUMINUM COVER PLATES TO FIT OVER

EXISTING HOUSING FOR ATTACHMENT OF NEW LED

WALL PACKS. SEE LIGHT SCHEDULE AND DETAIL 3

SHEET A602.

REPLACE SURFACE MOUNT HID WALL PACK LIGHT (3

EA). CONDUCTORS/BOX/CONDUIT TO REMAIN. SEE

SCHEDULE ON SHEET A601.

REMOVE EXTERIOR SURFACE MOUNTED CONDUIT

SUPPORTING FUEL LEVEL ALARM PANEL. PULL

CONDUCTORS BACK FROM PANEL TO NEAREST

INTERIOR JUNCTION BEYOND EIFS PENETRATION.

INSTALL NEW CONDUIT ON THE INTERIOR ABOVE

ACT CEILING AND INSIDE WALL, PENETRATE

EXTERIOR WALL TO LAND INSIDE ALARM PANEL. SEE

ELECTRICAL NOTES.

DEMOLISH 4 FLOODLIGHT, STEEL SUPPORTS, AND

ABANDONED CONDUIT. REMOVE

FASTENERS/ANCHORS AND SEAL HOLES IN

FACEBRICK WITH COLOR MATCHED MORTAR AND

COMPATIBLE PATCH MATERIAL IN EIFS.

DEMOLISH EIFS SECTION ABOVE DOUBLE DOOR;

INSTALL FACEBRICK AND FLASHING TO MATCH

SURROUNDING.

REPAIR EIFS HOLES, CRACKS, VOIDS, AND SIMILAR

DEFECTS TO MATCH EXISTING TEXTURE; REPLACE

VERTICAL AND HORIZONTAL SEALANT;

CLEAN/PREPARE EIFS FOR NEW FINISH; CLEAN

FLASHING AT EIFS/BRICK TRANSITIONS. RECOAT

EIFS WITH 1 COAT OF DRYVIT WEATHERLASTIC HB

ACRYLIC WALL COATING IAW MANUFACTURES

INSTRUCTIONS/SPECIFICATIONS. SUBMIT BROWN &

GRAY COLOR CHART FOR GOVT SELECTION.

DEMOLISH SIGN AND CONDUIT BACK TO WALL

PENETRATION. PATCH FASTENER AND CONDUIT

HOLES.

INSTALL NEW GFCI SIGN IN NEW LOCATION.

CONNECT SIGN TO EXISTING

CONDUIT/CONDUCTORS.

REPLACE METAL DOOR, FRAME, CLOSER, AND

ALARMED EXIT DEVICE. REPAIR INTERIOR GYP

BOARD DAMAGE ABOVE DOOR, FINISH & PAINT TO

MATCH. SEE DOOR SCHEDULE ON SHEET A601 AND

DETAILS 4,5,& 6 ON SHEET A602.

N.I.C.

GENERAL NOTES

1. PROJECT REPAIRS ARE IDENTIFIED BY

HEXAGON SYMBOLS AND/OR CROSSHATCHING.

2. HAND DRAWN TEXT IS FOR INFORMATION

ONLY AND IS NOT INTENDED TO DICTATE WORK

AS PART OF THIS PROJECT; FOLLOW HEXAGON

KEYNOTES.

3. ELEVATIONS ARE NOT TO SCALE..

ELECTRICAL NOTES

1. SEE SHEET AD101 FOR ELECTRICAL PANEL

LOCATIONS.

2. ALL ELECTRICAL WORK SHALL BE

ACCOMPLISHED BY A QUALIFIED ELECTRICIAN

LICENSED IN THE STATE OF MN.

3. ALL ELECTRICAL WORK SHALL BE

ACCOMPLISHED ON DE-ENERGIZED CIRCUITS

AND BE LOCKED/TAGGED OUT.

4. FUEL ALARM PANEL IS POWERED FROM

PANEL C VIA FUEL MANAGEMENT CONSOLE.

DOWNTIME MUST BE LIMITED DURING DUTY

HOURS. COORDINATE WITH PROJECT

ENGINEER PRIOR TO DE-ENERGIZING.

5. WALL PACKS ARE CONTROLLED BY TIME

SWITCH (TS2) AND POWERED FROM PANEL SL,

CIRCUITS 2,4,6. ADJUST NEW WALL PACKS TO

MINIMUM SETTING.

6. BUILDING SIGN CONTROLLED BY TIME

SWITCH (TS1); POWERED BY PANEL C, CIRCUITS

28,30.

7. STOREFRONT DOORS ARE POWERED FROM

PANEL D, CIRCUIT 20.

EIFS NOTES

1. THE DRYVIT OUTSULATION SYSTEM WAS

INSTALLED IN 1995. REPAIR EIFS USING

PRODUCTS AND METHODS APPROVED BY

DRYVIT AND THE CONTRACT DOCUMENTS.

2. CLEANING METHODS MUST PREVENT

WATER INTRUSION AND DAMAGE TO EIFS.

REMOVE ALL DIRT, DEBRIS, AND BIOLOGICAL

GROWTH TO PREPARE FOR NEW FINISHES. SEE

DETAILS 1 & 2 SHEET A602

DOOR NOTES

1. AUTOMATIC STOREFRONT DOOR REPAIRS

SHALL UTILIZE STANLEY COMPONENTS AND

INCLUDE NEW OPERATOR, CONTROLLER,

MICROWAVE MOTION SENSOR, SWING GUARD

SENSOR, DAUGHTERBOARD, AND PIVOT

ASSEMBLIES. SEE DOOR SCHEDULE SHEET

A601.

2. RESTRICT DOOR REPAIRS TO ONE SIDE AT A

TIME TO ALLOW FOR FACILITY ENTRY AND EXIT.

CANOPY N.I.C.

A602

WALL PACK , SEE

DETAIL 3/A602 (TYP)

EIFS , SEE DETAILS

1&2/A602 (TYP)

BALLAST DISPOSAL

1. WALL PACK BALLASTS WILL BE DISPOSED OF

BY THE GOV'T. PLACE BALLAST'S IN A SEALED

CONTAINER AND CONTACT THE PROJECT

ENGINEER FOR PICK-UP AND DISPOSAL.

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text W

AutoCAD SHX Text L

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text F

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

REFER

SCHED.

2" R

2" REFER

SCHED.

FRAME TYPES

NOT TO SCALE

DOOR TYPES

NOT TO SCALE

DOOR HARDWARE SETS

DOOR MANUFACTURERS / ABBREVIATIONS:

MK MCKINNEY YA ASSA ABLOY ACCENTRA, FORMERLY KNOWN AS YALE VD VON DUPRIN

PE PEMKO OT OTHER (AS IDENTIFIED) NO NORTON

SU SECURITRON HS HES ST STANLEY

RO ROCKWOOD FO FOLGER ADAM

SET: 1.0

DESCRIPTION: SGLE - EXTERIOR - PULL ACCESS WITH KEY CYLINDER LOCKING - SQUARE BOLT LATCHING

QTY ITEM DESCRIPTION FINISH MFR

3 HINGE (A8111) T4A3386 x USA US26D MK

6301 INTERCHANGEABLE CORE (CT7SB) SFIC A2 GRADE 1- 7 PIN GFGI

1 SURFACE CLOSER (C02021-PT4G) CPS8501 M 689 LC

1 KICK PLATE (J102) K1050 10"CSK US32D RO

1 THRESHOLD (J36100) 2009APK PE

1 RAIN GUARD (R0Y976) 346C PE

1 GASKETING (R3E164) 303AS PE

1 SWEEP (R3D534) 345AV PE

1 ALARMED RIM EXIT W/TRIM 99 NIGHT LATCH 345AV VDVD99E0-3-US28-ALK

LC LCN

SET: 2.0

DESCRIPTION: SGLE - INTERIOR/EXTERIOR STORE FRONT- POWER OPERATOR

QTY ITEM DESCRIPTION FINISH MFR

3 CONTROLLER 314340 KIT-CONTROLLER-IQ-MF/MS-SINGLE ST

3 OPERATOR 314309 OPERATOR-IQ-M FORCE ST

3 SENSOR KIT 700354 SWING GUARD T

3 SENSOR MOTION 516669 MICROWAVE MOTION ST

3 DAUGHTERBOARD 8015700713 SWING GUARD IQ ST

3 ARM ASSY CTR PIVOT 907311652 ST

3 BOTTOM PIVOT PKG 312903-1 ST

D w n by

D es ig ne d by

R ev ie w ed b y:

S ub m itt ed b y:

Sheet 5 of 6

D E

S C

N M

A R

H A

F T

G , U

S A

F R

R Y

H W

A Y

N E

A P

B U

H C

E N

E E

S U

S T

A U

T O

M A

D O

O R

S , B

-0

S C

H E

D U

C D

D 1/

C D

T M

A601

D A

T E

LIGHTING SCHEDULE

MARK DESCRIPTION VENDOR MODEL # COLOR/FINISH NOTES

WP-1 LED WALL PACK LITHONIA

TWX2 LED ALO 40K MV

DDBTXD DK BRONZE 1

NOTES:

1 - OR APPROVED EQUAL

DOOR SCHEDULE

DOORS FRAME

E R

D W

N O

D O

O R

SIZE

DETAILS SEE A-602

G H

127 F 1 3' - 0" 7' - 0" 1 3/4" HM PT F1 HM PT 5 4 6 1.0YESNA 1

1. PAINT DOOR AND FRAME WITH 2 COATS DARK BRONZE SEMI-GLOSS ALKYD ENAMEL OVER FACTORY PRIMER.

STOREFRONT DOORS- SEE DOOR HARDWARE SET 2.0

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text W

AutoCAD SHX Text L

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text F

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

CONTINUOUS FLASHING

SEALANT WITH BOND

BREAKER,

APPROVED SUBSTRATE

APPROVED TREMCO

CPG SEALANT OR

APPROVED EQUIVALENT

WITH CLOSED CELL

BACKER ROD

FACEBRICK

DRYVIT ADHESIVE

DRYVIT FINISH

DRYVIT BASE COAT

DRYVIT REINFORCING

MESH EMBEDDED IN

DRYVIT BASE COAT

DRYVIT DETAIL MESH®

WRAPPED TO BACKSIDE

OF EPS MIN. 2 1/2"

EPS INSULATION BOARD

3/4" MIN.

DRYVIT BASE COAT

OUTSULATION SYSTEM

EXPANDED METAL

LATH AND WATER

RESISTIVE BARRIER,

MIN.

MUST

OVERLAP

8" MIN.

MUST

OVERLAP

8" MIN. 8"

MIN.

DRYVIT FINISH

APPROVED SUBSTRATE

DRYVIT BASE COAT

DRYVIT REINFORCING

MESH EMBEDDED IN

DRYVIT BASE COAT

DRYVIT ADHESIVE

EPS INSULATION

DRYVIT REINFORCING

MESH EMBEDDED IN

DRYVIT BASE COAT

EPS INSULATION

APPROVED SUBSTRATE

DRYVIT ADHESIVE

DRYVIT BASE COAT

OUTSULATION

SYSTEM

DRYVIT FINISH

8 14" 8 14"

6'-4"

8'-8"

1'-01 4"

1' 3 12" 1 2"

D w n by

D es ig ne d by

R ev ie w ed b y:

S ub m itt ed b y:

Sheet 6 of 6

D E

S C

N M

A R

H A

F T

G , U

S A

F R

R Y

H W

A Y

N E

A P

B U

H C

E N

E E

NTS

EIFS DETAIL1 NTS

EIFS DETAIL2

1 1/2 = 1'

DOOR HEAD4 1 1/2" = 1'

DOOR JAMB5

1" = 1'

WALL PACK COVER PLATE3

1 1/2" = 1'

DOOR SILL6

1/4" = 1'

DOUBLE DOOR INFILL7

WOOD BLOCKING

R19 INSULATION

8" GYP. BD.

EIFS ASSEMBLY

DOOR

SEALANT

H.M. FRAME

GROUT SOLID

EXTERIOR SHEATHING

THRESHOLD- SET IN

CONTINUOUS SEALANT

DOOR

CONCRETE SLAB

DOOR FRAME

WOOD BLOCKING

R19 INSULATION

8" GYP. BD.

FACE BRICK

DOOR

SEALANT

H.M. FRAME

GROUT SOLID

EXTERIOR SHEATHING

METAL STUD

S U

S T

A U

T O

M A

D O

O R

S , B

-0

D E

T A

C D

D 1/

C D

T M

A602

D A

T E

.125" THICK ALUMINUM COVER

PLATE WITH WELDED CORNERS;

POWDERCOAT DARK BRONZE

STAINLESS SCREWS WITH

SEALING WASHER

FIELD VERIFY COVER PLATE

DIMENSIONS TO ACHIEVE A

UNIFORM BORDER AROUND WALL

PACK AND FIXTURE FITMENT

SEAL COVER TO EIFS ON

TOP AND SIDES

ADHERE GASKET TO

UNDERSIDE OF COVER TO SEAL

AGAINST INNER FLANGE OF

FIXTURE FACE.

FIXTURE FACE

LED WALL PACK. SEE

SCHEDULE

CUT/REMOVE EIFS TO FACILITATE FLASHING

INSTALL. FILL WITH NEW EIFS TO MATCH

SURROUNDING COLOR & TEXTURE.

6"-16 GA. HM STUDS @ 16" O.C. WITH

TOP/BOTTOM TRACK AND HORIZONTAL

BRIDGING @ 48" O.C. MIN. FACE EXTERIOR

WITH 58" EXT. GYP. SHEATHING AND 30# FELT.

R-19 BATT INSULATION.

UTILITY FACEBRICK. INSTALL MASONRY

ANCHORS @ 16" O.C. VERTICALLY. MATCH

EXISTING COLOR ON BRICK & GROUT; TOOTH

IN TO MATCH COURSING. MAINTAIN AIR GAP

BETWEEN SHEATHING AND BRICK.

DEMO EIFS ABOVE OPENING.

INSTALL AL. FLASHING AGAINST SHEATHING

UP TO ADJACENT WALL; OVERLAP EXISTING

FLASHING 6" MIN.AND SEAL JOINT. MATCH

EXISTING COLOR AND PROFILE.

8"GYP. BD. ON INTERIOR FACE WITH VAPOR

BARRIER. TAPE, FINISH, & PAINT TO MATCH .

MATCH 4" WALL BASE.

FILL STEM WALL GAP WITH CONCRETE TO

MATCH ADJACENT ELEVATIONS AS NEEDED.

MATCH STRETCHER SILL. HEAD JOINT

VENT @ 48" O.C.

AIR GAP.

FACE BRICK

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text W

AutoCAD SHX Text L

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text F

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

File details come from the government source that posted it. Updated Mar 18, 2026.