Attachment 2 - Lenel Power Supply Encl.pdf
PDF 529 KB Posted
- Solicitation number
- Not on record
About this file
This document is a product specification sheet for the Lenel LNL-AL600ULX-4CB6 power supply charger. The device converts 115 VAC 50/60 Hz input into a power-limited 12 VDC output with four individual circuit breaker outputs. Key specifications include a maximum 6 amps continuous supply current, built-in charger for sealed lead acid or gel batteries, and automatic switchover to battery backup when AC fails. The power supply is UL 294 and 1076-listed, Class 2 rated, and comes with a gray LNL-CTX6 enclosure that can accommodate up to 6 Lenel access control modules. Ordering options include the base unit (LNL-AL600ULX-4CB6), an optional battery backup (ABT-12), and a cabinet-only option (LNL-CTX6).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought P1102 ESS.pdf | ||
| Sources Sought P1102 ESS.pdf | ||
| Attachment 1 - Response Form.docx | DOCX document | |
| Attachment 4 - ID Factor - 2FA Card Reader.pdf | ||
| Attachment 3 - Altronix Power Supply Encl.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Power Supply Charger
LNL-AL600ULX-4CB6
Overview
The LNL-AL600ULX-4CB6 is a power-limited supply/charger that will convert a 115 VAC 50/60 Hz input, into a power-limited 12 VDC output.
Specifications
Input Power
Input 115 VAC 50/60 Hz, 1.9 amp
Thermal overload protection
Short circuit protection
Primary plug-able connector for incoming 115 VAC
Output Power
12 VDC, 4-port power limited outputs
Maximum 6 amps continuous supply current at 12 VDC
Four individual circuit breaker outputs rated @ 2.5 amps each
100 mV peak output voltage ripple
Indicators AC input and DC output LED indicators
Battery Charging
Built-in charger for sealed lead acid or gel type batteries (Optional ABT-12)
Automatic switchover to standby battery when AC fails
Maximum charge current 0.7 amp
Low battery and battery presence supervision (form C contacts)
AC fail supervision (form C contacts)
Zero voltage drop when switched over to battery backup
Regulatory Compliance
UL 294 and 1076-listed
ULC/ORD-C1076-M1986
S319/CSA C22.2 No. 205-M1983
Class 2 rated
FCC
Physical Dimensions
Power supply board dimensions: 4.5 x 7.25 x 1.8 in. (114 x 184 x 46 mm)
Enclosure dimensions: 24.25 x 18.25 x 4.75 in. (616 x 464 x 121 mm)
FEATURES & FUNCTIONALITY
• LNL-CTX6 enclosure (gray with Lenel logo)
• Offline power supply board - AL1012ULXBL
• Tamper switch
• Lenel lock with two keys
• 50 plastic snap-in stand-offs
• Battery leads
• Installation instructions
• Can accommodate up to 6 Lenel access control modules
Ordering
Part Number Description
LNL-AL600ULX-4CB6 115 VAC configuration
ABT-12 Battery backup option
LNL-CTX6 Cabinet only, with lock (24.25 x 18.25 x 4.75 in. / 616 x 464 x 121 mm)
(866) 788-5095
Specifications subject to change without notice.
© 2013 Lenel Systems International, Inc. All rights reserved. Lenel and OnGuard are registered trademarks of Lenel Systems International, Inc. All other trademarks and copyrights are the property of their respective owners.
LNL_TS_AL600ULX-4CB6_092513
lenel.com
File details come from the government source that posted it. Updated .