Attachment 2 - DD254.pdf

PDF 3 MB Posted

Attached to
C44 Engineering and installation service support MAC Federal contract opportunity
Solicitation number
22-SMM-029
Issued by
Department of the Navy Naval Sea Systems Command

About this file

This DD254 form and associated documents outline security requirements and guidance for an engineering services contract awarded by the Naval Sea Systems Command. The contract requires access to classified information up to the Confidential level and involves engineering services including program management, logistics support, and installation services for propulsion and power systems at various US locations. The contractors must be US citizens with a Confidential clearance and are subject to additional security requirements for classified document handling, derivative classifier training, and security incident reporting. The multiple award contract was awarded on August 11, 2020 to five contractors for a total ceiling amount of $34,636,452 to provide engineering and installation service support.

View the file

Other files for this federal contract opportunity

Other files attached to C44 Engineering and installation service support MAC, newest first.
File Type Posted
Attachment 3 -Cost Summary Format.xls XLS spreadsheet
Attachment 6 -NSWCPD SBPCD.xlsx XLSX spreadsheet
N64498-17-R-5003 amendment 0001 Final.pdf PDF
N64498-17-R-5003 0004 Final.pdf PDF
Attachment 5 - N64498-17-R-5003 QA2.docx DOCX document
N64498-17-R-5003 0002.pdf PDF
CDRL A001 - Contract Status Report - Approved.pdf PDF
Exhibit A - CDRLs.pdf PDF
N64498-17-R-5003 Amendment 0005.pdf PDF
N64498-17-R-5003 Amendment 0003.pdf PDF
N64498-17-R-5003.pdf PDF
Attachment 4 - Direct Labor Rate Substantiation.xls XLS spreadsheet
Attachment 1 - N64498-17-R-5003 QA Final.docx DOCX document
Show all 13

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

b. LEVEL OF SAFEGUARDING REQUIRED

2. THIS SPECIFICATION IS FOR: (X and complete as applicable)

a. PRIME CONTRACT NUMBER

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable)

a. ORIGINAL (Complete date in all cases)

REVISION NO.

c. FINAL (Complete Item 5 in all cases)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specs)

DATE (YYYYMMDD)

DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If Yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If Yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10. CONTRACTOR WILL REQUIRE ACCESS TO: 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL:YES NO YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION

b. RESTRICTED DATA

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION

d. FORMERLY RESTRICTED DATA

e. INTELLIGENCE INFORMATION

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

f. SPECIAL ACCESS INFORMATION

g. NATO INFORMATION

h. FOREIGN GOVERNMENT INFORMATION

i. LIMITED DISSEMINATION INFORMATION

j. FOR OFFICIAL USE ONLY INFORMATION

k. OTHER (Specify)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE TEMPEST REQUIREMENTS

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

l. OTHER (Specify)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE.

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release

a. TYPED NAME OF CERTIFYING OFFICIAL

Direct Through (Specify)

d. ADDRESS (Include Zip Code)

Yes No to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classifiection guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;

and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract.

(If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Yes No15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office.

(If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

b. TITLE c. TELEPHONE (Include Area Code)

e. SIGNATURE

17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

DD254 Fillable with Security Page and Electronic Signature
ddform 254 cont
ddform254cont1
ddform254cont2
FillText1: Off
a_PRIME_CONTRACT_NUMBER:
FillText3: Off
b_SUBCONTRACT_NUMBER:
FillText5: Yes
c_SOLICITATION_OR_OTHER_N: N64498-17-R-5003
DUE_DATE_YYYYMMDD:
3_A: Original.
DATE_YYYYMMDD: 20170815
3_B: Off
REVISION_NO:
DATE_YYYYMMDD1:
3_C: Off
DATE_YYYYMMDD2:
4_Yes: Off
4_No: No
YES1:
5_Yes: Off
5_No: No
FillText12:
FillText11:
a_NAME_ADDRESS_AND_ZIP_CO: TBD
b_CAGE_CODE:
c_COGNIZANT_SECURITY_OFFI:
a_NAME_ADDRESS_AND_ZIP_C1:
b_CAGE_CODE1:
c_COGNIZANT_SECURITY_OFF1:
a_LOCATION: Various U.S. CONUS/OCONUS
b_CAGE_CODE2:
c_COGNIZANT_SECURITY_OFF2:
9_GENERAL_IDENTIFICATION: Provide engineering and installation service support, as well as for the associated program management and logistics support, for the Propulsion & Power Systems.
a_COMMUNICATIONS_SECURIT1: Off
a_COMMUNICATIONS_SECURIT2: Yes
b_RESTRICTED_DATA1: Off
b_RESTRICTED_DATA2: Yes
c_CRITICAL_NUCLEAR_WEAPO1: Off
c_CRITICAL_NUCLEAR_WEAPO2: Yes
d_FORMERLY_RESTRICTED_DA1: Off
d_FORMERLY_RESTRICTED_DA2: Yes
1_Sensitive_Compartmente1: Off
1_Sensitive_Compartmente2: Yes
2_NonSCI1: Off
2_NonSCI2: Yes
f_SPECIAL_ACCESS_INFORMA1: Off
f_SPECIAL_ACCESS_INFORMA2: Yes
g_NATO_INFORMATION1: Off
g_NATO_INFORMATION2: Yes
h_FOREIGN_GOVERNMENT_INF1: Off
h_FOREIGN_GOVERNMENT_INF2: Yes
i_LIMITED_DISSEMINATION_1: Off
i_LIMITED_DISSEMINATION_2: Yes
j_FOR_OFFICIAL_USE_ONLY_I: Yes
j_FOR_OFFICIAL_USE_ONLY_1: Off
k_OTHER_Specify: Off
k_OTHER_Specify1: Off
other1:
a_COMMUNICATIONS_SECURIT3: Off
a_COMMUNICATIONS_SECURIT4: Yes
b_RESTRICTED_DATA3: Off
b_RESTRICTED_DATA4: Yes
c_CRITICAL_NUCLEAR_WEAPO3: Off
c_CRITICAL_NUCLEAR_WEAPO4: Yes
d_FORMERLY_RESTRICTED_DA3: Off
d_FORMERLY_RESTRICTED_DA4: Yes
e_INTELLIGENCE_INFORMATI3: Yes
e_INTELLIGENCE_INFORMATI4: Off
1_Sensitive_Compartmente3: Off
1_Sensitive_Compartmente4: Yes
2_NonSCI3: Off
2_NonSCI4: Yes
f_SPECIAL_ACCESS_INFORMA3: Off
f_SPECIAL_ACCESS_INFORMA4: Yes
g_NATO_INFORMATION3: Off
g_NATO_INFORMATION4: Yes
h_FOREIGN_GOVERNMENT_INF3: Off
h_FOREIGN_GOVERNMENT_INF4: Yes
i_LIMITED_DISSEMINATION_3: Off
i_LIMITED_DISSEMINATION_4: Yes
FillText13: Off
FillText14: Off
1_OTHER_Specify:
12_Public_Release_Direct: Direct.
12_Public_Release_Through: Off
security:

An Active CONFIDENTIAL, Facility Clearance (FCL) is required for performance on this contract. The contractor must have a Safeguarding Level of CONFIDENTIAL.

Item 1(a): "All contractor personnel accessing classified information or material associated with and/or performing work relative to the resultant contract must be United States citizens and shall have and maintain at a minimum CONFIDENTIAL security clearance at time of contract award.

-Item 10(j): DoD M-5200.01 Volume 4, DoD Information Security Program: Controlled Unclassified Information (CUI) of 2/24/2012.

-Item 11(e), Engineering Services: This contract is for engineering services at the NSWC Philadelphia Division, and/or its associated cleared facilities. Classification markings on the material to be furnished will provide the classification guidance necessary for performance of this contract.

14_Yes: Off
14_No: No
addit_sec:
15_Yes: Off
15_No: No
Inspections:
a_TYPED_NAME_OF_CERTIFYIN: LOUISE R. BRUNSON
b_TITLE: Contracting Officer for Security Matters
FillText21: Yes
FillText22: Off
FillText23: Yes
2017-08-15T17:44:22-0400
BRUNSON.LOUISE.R.1243837878
FillText24: Off
FillText25: Yes
FillText26: Yes
f_OTHERS_AS_NECESSARY: 1051
Reset:
solic_con2: N64498-17-R-5003
Text12: 6
Text15: of
Text13: 3
Text17: 4
Text18: 5
Text11: -----------See Continuation Page of ----------------------
Dropdown20: [Confidential]
Dropdown21: [Confidential]
Text1:

--Classified or unclassified technical papers to be presented at a classified symposium must be approved by the NSWCPD Contracting Officer's Representative (COR) prior to the presentation.

-Security classification guides and controlled unclassified information(CUI) (e.g., FOUO, distribution statement controlled) are not authorized for public release; therefore, they cannot be posted on a publicly accessible web-server or transmitted over the internet unless appropriately encrypted. Request for public release cannot be transmitted via the internet until the contractor receives final approval from NAVSEA (SEA 00D).

-Contractor must submit a request for sharing of classified and other sensitive information between prime contracts in writing to the NSWCPD Security Office (Code 1051) identified in Item 16 of this form.

-Personnel designated as derivative classifiers shall receive derivative classification training prior to access from the contractor's Facility Security Officer (FSO). The FSO shall ensure personnel receive initial and biennial training during the life of this contract. Evidence of completion, training certificates or equivalent, shall be provided to the Information Assurance Manager no later than the individual's due date.

-All classified documents must be destroyed using a National Security Agency (NSA) approved high security crosscut shredder listed on the NSA/CSS evaluated products list(EPL) for high security crosscut paper shredders, or other approved method for destroying classified information.

-All classified information involved in security incidents shall be retained and provided to the certifying official in Item 16 of this DD 254 for classification review.

Text3:
Text4:
Text2:

-All reports of contractor security violations associated with this contract shall be sent by the Cognizant DSS field office directly to the certifying official in Item 16 of this DD254.

-Forward a copy of subcontractor DD 254s issued under this contract to the official shown in item 16 of this DD254.

-All security related requests pertaining to this contract shall be submitted in writing by the contractor’s Facility Security Officer (FSO) to the individual identified in Item 16 of this DD254.

This DD254 is for solicitation purposes only; therefore, it must be returned to NSWCPD CODE 1051 to be updated with a contract number upon contract award before the contract DD254 can be issued to the contractor

COR: ALBERT MUI, CODE 4420, 215-897-7334, ALBERT.MUI@NAVY.MIL

CONTRACTING SPECIALIST: GRAHAM IRBY, CODE 0212, 215-897-1366, GRAHAM.IRBY@NAVY.MIL

Text5:
Text6:
Text7: 6
Text10: 215-897-2031
Text14: NSWCPD 4700 S. Broad St., Code 1051

Building 29 1st flr. Philadelphia, Pa 19112 Dropdown15: [No Public Release Authorized. Contact CO, NSWCPD, 4700 S. Broad St. Phila, PA 19112.]

File details come from the government source that posted it. Updated .