Attachment 2_Additional Provisions and Clauses - 3D Printer.pdf
PDF 34 KB Posted
- Attached to
- 3D Printer System
- Solicitation number
- FA500026Q0069
About this file
This document is a Clauses Incorporated by Reference section from a federal solicitation (FA500026Q0069) issued by the U.S. Air Force. The document lists and includes the full text of approximately 50 mandatory and discretionary contract clauses applicable to the procurement, organized by section reference in the solicitation. The clauses cover compliance requirements across multiple functional areas including defense telecommunications equipment restrictions, Buy American provisions, small business subcontracting limitations, payment and invoicing procedures, labor standards, anti-trafficking measures, sustainable products, and representations and certifications regarding business operations and prohibited associations.
Key clauses include provisions requiring compliance with the Wide Area WorkFlow (WAWF) electronic invoicing system with specific Department of Defense Activity Address Code (DoDAAC) routing instructions; Buy American and Free Trade Agreement compliance with product origin certifications; a 10 percent evaluation preference for HUBZone small business concerns; subcontracting limitations capping payments to non-similarly situated entities at 50 percent (services/supplies) or 75-85 percent (construction); child labor certifications; covered defense telecommunications equipment prohibitions; and various representations regarding Maduro regime operations, Xinjiang sourcing, and inverted domestic corporations. The document serves as a compilation of standard federal contract terms rather than specifying particular products, services, or procurement requirements. Evaluation factors and specific technical specifications are referenced as being contained in separate addenda to this solicitation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DOCUMENT NUMBER
FA500026Q0069
CLAUSES INCORPORATED BY REFERENCE
CLAUSE
NO
ALT NO/
DEV NO
CLAUSE TITLE YEAR-
MO
SECTION
252.203-7000 Requirements Relating to Compensation of Former DoD Officials.
2011-09 SEC I
252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I
252.203-7005 Representation Relating to Compensation of Former DoD Officials.
2022-09 SEC K
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
2023-01 SEC I
252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.225-7001 Buy American and Balance of Payments Program. 2024-02 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings. 2023-01 SEC I
252.225-7055 Representation Regarding Business Operations with the Maduro Regime.
2022-05 SEC K
252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.
2023-01 SEC I
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.
2023-06 SEC K
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
2023-06 SEC I
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.
2018-12 SEC G
252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.246-7008 Sources of Electronic Parts. 2023-01 SEC I 252.247-7023 Transportation of Supplies by Sea. 2024-10 SEC I
52.203-18 Prohibition on Contracting with Entities that Require Certain
Internal Confidentiality Agreements or Statements- Representation.
2017-01 SEC L
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.
2017-01 SEC I
52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038)
2026-02 SEC I
52.204-7 System for Award Management-Registration. (Deviation 2026- O0038)
2026-02 SEC L
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-O0038)
2026-02 SEC I
52.209-6 Protecting the Government's Interest When Subcontracting
With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)
2026-02 SEC I
52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026-O0038)
2026-02 SEC L
52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-O0038)
2026-02 SEC I
52.214-34 Submission of Offers in the English Language. 1991-04 SEC L 52.214-35 Submission of Offers in U.S. Currency. 1991-04 SEC L 52.217-3 Evaluation Exclusive of Options. 1984-04 SEC M
52.222-19 Child Labor-Cooperation with Authorities and Remedies.
(Deviation 2026-O0038)
2026-03 SEC I
52.222-3 Convict Labor. (Deviation 2026-O0038) 2026-02 SEC I
52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038)
2026-02 SEC I
52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) 2026-02 SEC I
52.222-90 Addressing DEI Discrimination by Federal Contractors.
(Deviation 2026-O0040, Revision 1)
2026-04 SEC I
52.223-23 Sustainable Products. (Deviation 2026-O0038) 2026-02 SEC I
52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act.
(Deviation 2026-O0038)
2026-02 SEC I
52.225-3 ALT II Buy American-Free Trade Agreements-Israeli Trade Act.
(Deviation 2026-O0038) (Alternate II)
2026-02 SEC I
52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.
2024-05 SEC I
52.232-33 Payment by Electronic Funds Transfer-System for Award Management.
2018-10 SEC I
52.232-40 Providing Accelerated Payments to Small Business Subcontractors.
2023-03 SEC I
52.233-3 Protest after Award. (Deviation 2026-O0038) 2026-02 SEC I
52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038)
2026-02 SEC I
52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-O0038)
2026-02 SEC K
52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)
2026-04 SEC I
52.232-18 Availability of Funds. 1984-04 SEC I 52.219-33 Nonmanufacturer Rule. (Deviation 2026-O0038) 2026-02 SEC I
252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I
CLAUSES IN FULL TEXT
CLAUSE
NO
CLAUSE TITLE ALT NO/
DEV NO
YEAR-
MO
CLAUSE TEXT
252.204-7017 Prohibition on the Acquisition of Covered Defense
Telecommunications Equipment or Services-Representation.
2021-05
PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS
EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)
The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."
(a) . "Covered defense telecommunications equipment or services," "covered mission," Definitions "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.
(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 Prohibition (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.
(c) . The Offeror shall review the list of excluded parties in the System for Award Procedures Management (SAM) at for entities that are excluded when providing any https://www.sam.gov equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.
(d) . If in its annual representations and certifications in SAM the Offeror has Representation represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:
The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.
(e) . If the Offeror has represented in paragraph (d) of this provision that it "will Disclosures provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:
(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).
(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.
(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).
(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).
(End of provision)
252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process Electronic invoicing.
vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web- WAWF training.
Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, WAWF methods of document submission.
Electronic Data Interchange, or File Transfer Protocol.
(f) The Contractor shall use the following information when WAWF payment instructions.
submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following Document type.
document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
Combo
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
N/A
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table Document routing.
below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC F87700
Issue By DoDAAC FA5000
Admin DoDAAC FA5000
Inspect By DoDAAC F1W2F3
Ship To Code F1W2F3
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) ____
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentation Payment request.
appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements Receiving report.
of DFARS Appendix F.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act
Certificate. (Deviation 2026-O0038) 2026-02
Buy American-Free Trade Agreements-Israeli Trade Act Certificate (Feb 2026) (Deviation 2026- O0038)
(a)
(1) The Offeror certifies that each end product, except those listed in paragraph (b) or (c)(1) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(2) of this provision contains a critical component.
(2) The terms "Bahraini, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."
(b) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":
Free Trade Agreement Country End Products (Other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:
Line item No. Country of origin
[ ]List as necessary (c)
(1) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."
Other Foreign End Products:
Line Item No. Country of origin
[ ]List as necessary
(2) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).
Line Item No. ____
[ ]List as necessary
(d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation.
(End of provision)
52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act
Certificate. (Alternate II)
ALT II 2025-01
Alternate II ( 2025). As prescribed in (b)(2)(ii), substitute the following paragraph (b) for JAN 25.601 paragraph (b) of the basic provision:
(b) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act".
Israeli End Products:
Line Item No.
[ ]List as necessary
52.219-4 Notice of Price Evaluation Preference for HUBZone Small
Business Concerns. (Deviation 2026-O0038) 2026-02
Notice of Price Evaluation preference for HUBZone Small Business Concerns (Feb 2026) (Deviation 2026-O0038)
Evaluation preference.(a)
(1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except-
(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and
(ii) Otherwise successful offers from small business concerns.
(b) . A HUBZone small business concern may choose to waive the Waiver of evaluation preference evaluation preference. If the concern waives the preference, the factor will be added to its offer for evaluation purposes.
Offeror chooses to waive the evaluation preference.
(c) A HUBZone joint venture agrees that, in the performance of the contract, at least 40 Joint venture.
percent of the aggregate work performed by the joint venture shall be completed by the HUBZone small business parties to the joint venture. Work performed by the HUBZone small business parties to the joint venture must be more than administrative functions.
(End of provision)
52.222-18 Certification Regarding Knowledge of Child Labor for Listed
End Products.
2021-02
Certification Regarding Knowledge of Child Labor for Listed End Products (FEB 2021)
(a) .Definition
Forced or indentured child labor means all work or service-
(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or
(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.
(b) . The following end product(s) being acquired under this solicitation is (are) Listed end products included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, identified by their country of origin. There is a reasonable basis to believe that listed end products from the listed countries of origin may have been mined, produced, or manufactured by forced or indentured child labor.
Listed End Product Listed Countries of Origin
(c) . The Government will not make award to an offeror unless the offeror, by checking Certification the appropriate block, certifies to either paragraph (c)(1) or paragraph (c)(2) of this provision.
(1)
The offeror will not supply any end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in a corresponding country as listed for that end product.
(2)
The offeror may supply an end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture such end product. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.
(End of provision)
52.219-14 Limitations on Subcontracting. (Deviation 2026-O0038) 2026-02
Limitations on Subcontracting (Feb 2026) (Deviation 2026-O0038)
(a) This clause does not apply to the unrestricted portion of a partial set-aside.
(b) , as used in this clause, means a first-tier subcontractor, Definition. Similarly situated entity including an independent contractor, that-
(1) Has the same small business program status as that which qualified the prime contractor for the award ( , for a small business set-aside contract, any small business concern, without regard to its e.g.
socioeconomic status); and
(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.
(c) This clause applies only to-Applicability.
(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(3) Contracts that have been awarded on a sole-source basis in accordance with sections 19.105, 19.106, 19.107, and 19.108;
(4) Orders expected to exceed the simplified acquisition threshold and that are set aside for small business concerns under multiple-award contracts, as described in 8.4 and 16.5;
(5) Orders, regardless of dollar value, that are set aside in accordance with sections 19.105, 19.106, 19.107, and 19.108 under multiple-award contracts, as described in 8.4 and 16.5; and
(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.
(d) An independent contractor shall be considered a subcontractor.Independent contractors.
(e) By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for-
(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;
(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;
(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or
(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.
(f) The Contractor shall comply with the limitations on subcontracting as follows:
(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause-
[ ] Contracting Officer check as appropriate.
By the end of the base term of the contract and then by the end of each subsequent option period; or
By the end of the performance period for each order issued under the contract.
(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.
(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.
(1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions.
(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions.
(End of clause)
52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act.
(Alternate IV)
ALT IV 2022-10
Alternate IV ( 2022). As prescribed in (b)(1)(iv) substitute the following sentence for the Oct 25.601 first sentence of paragraph (1)(ii)(A) of the definition of in paragraph (a):domestic end product
(A) The cost of its components mined, produced, or manufactured in the United States exceeds __ percent of the cost of all its components. [ ]65 Contracting officer to insert the percentage.
52.212-2 Evaluation-Commercial Products and Commercial Services.
(Deviation 2026-O0038) 2026-02
Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-O0038)
(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:
[Insert evaluation factors in the relative order of importance. For requests for proposals, state:
Evaluation factors other than price when combined are [significantly more important than price /approximately equal to price/significantly less important] than price. For invitations for bids, list only price and price-related factors.]
See addendum 52.212-2 on Combo
(b) . The Government will evaluate offers for award purposes by adding the Options (if applicable) total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).
(c) . A written notice of award or acceptance of an offer furnished to the successful Notice of award Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.
(End of provision)
File details come from the government source that posted it. Updated .