Attachment_2_-_6603-TS-0305721.pdf
PDF 131 KB Posted
- Attached to
- Land Survey Products
- Solicitation number
- 0000040690
- Issued by
- California
About this file
This technical specification document establishes minimum requirements for Geospatial Land Survey Equipment to be used by California state agencies in support of statewide geospatial survey operations. The specification defines equipment categories and performance standards for Total Stations, Spatial Stations, Data Collectors, Global Navigation Satellite System (GNSS) units, Digital Levels, and Scanners. Total Stations must feature angular accuracy of 1-3 arcseconds, required robotics and prism tracking technologies, and reflectorless electronic distance measurement capabilities extending to at least 50 meters. Spatial Stations require minimum 3 arcseconds angular accuracy, mandatory robotics, 25,000 points per second scan rate capability, and laser classification of 3R per applicable standards. Data Collectors must operate on Windows or Android platforms with minimum 2GB RAM, 4GB storage, 4.3-inch screens, and IP65 ingress protection ratings. GNSS equipment must support multiple constellations (GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS) with positioning accuracy not exceeding 10mm horizontal and 15mm vertical, plus inertial measurement unit tilt compensation. Digital Levels require maximum 0.7mm per kilometer accuracy per ISO 17123-2 standards with measurement ranges to 100 meters or longer and minimum 20x magnification. Scanners are specified in two categories: stationary scanners with up to 120,000 points per second scan speed and 130-meter measurement range, and mobile scanners with up to 2 million points per second capability and 180-meter range.
The specification references multiple regulatory standards including International Electrotechnical Commission (IEC) 60825-1 for laser safety, ANSI Z136.1 and IEC 60529 for enclosure protection ratings, and ISO 17123-2 for field testing procedures. All equipment must comply with applicable laws, regulations, and industry standards in effect at the opening of the Invitation for Bid. The related contract opportunity indicates this is a multi-year statewide contract with an initial two-year term and three optional one-year extensions, issued by the California Department of General Services Procurement Division. The contract will be awarded on an all-or-none basis by silo and is mandatory for use by the California Department of Transportation while available for optional use by other state departments and local governmental agencies throughout California. No pricing terms, set-asides, incumbent information, or specific funding amounts are provided in this technical specification document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_1_-_Pricing_Worksheet.xlsx | XLSX spreadsheet | |
| Attachment_3_-_IFB_Narrative_Response.xlsx | XLSX spreadsheet | |
| IFB_0000040690_Land_Survey_Products.docx | DOCX document | |
| APP_Cover_Page.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF CALIFORNIA Attachment 2 Technical Specification 6603-TS-0305721 Geospatial Land Survey Equipment Event ID 0000039279
LAI, Y Page 1 of 2 7/15/2026
1. Scope This specification establishes the minimum requirements for Geospatial Land Survey Equipment, which will be used by the California state agencies to support statewide geospatial survey operations.
2. Regulations, Codes, and Standards Regulations, codes, standards, and specifications referenced in this document in effect on the opening of the Invitation for Bid (IFB), form a part of this specification. The products covered by this specification shall comply with all applicable laws, regulations, and industry standards including, but not limited to, the following:
2.1 Regulations
2.1.1 N/A
2.2 Codes
2.2.1 N/A
2.3 Standards
2.3.1 International Electrotechnical Commission (IEC) 60825-1: Safety of laser products - Part
1: Equipment classification and requirements
2.3.2 American National Standards Institute (ANSI) Z136.1: Degrees of Protection Provided by Enclosures
2.3.3 International Electrotechnical Commission (IEC) 60529: Degrees of Protection Provided by Enclosures
2.3.4 Global Positioning System (GPS)
2.3.5 Global Navigation Satellite System, aka Globalnaya Navigatsionnaya Sputnikovaya
Sistema (GLONASS)
2.3.6 Galileo Satellite System (GALILEO)
2.3.7 Big Dipper, aka BeiDou Navigation Satellite System (BEIDOU)
2.3.8 Satellite-Based Augmentation System (SBAS)
2.3.9 Quasi-Zenith Satellite System (QZSS)
2.3.10 International Organization for Standardization (ISO) 17123-2: Optics and optical instruments — Field procedures for testing geodetic and surveying instruments
3. Requirements Geospatial Land Survey Equipment shall consist of Total Stations, Spatial Stations, Data Collectors, Global Navigation Satellite System (GNSS), Digital Levels, and Scanners.
3.1 Total Station
3.1.1 Angular Accuracy: 1 – 3 arcseconds
3.1.2 Robotics: Required
3.1.3 Prism Tracking Technologies: Required
3.1.4 Electronic Distance Measurement (EDM) Reflectorless Capabilities: Required
STATE OF CALIFORNIA Attachment 2 Technical Specification 6603-TS-0305721 Geospatial Land Survey Equipment Event ID 0000039279
LAI, Y Page 2 of 2 7/15/2026
3.1.5 Distance – Reflectorless: 50 meters or greater
3.1.6 Distance – Single Prism: At least up to 800 meters
3.2 Spatial Station
3.2.1 Angular Accuracy: At least 3 arcseconds
3.2.2 Robotics: Required
3.2.3 Scan Rate: 25,000 points/second (pts/sec)
3.2.4 Laser Class: 3R per IEC 60825-1 or ANSI Z136.1
3.3 Data Collector
3.3.1 Operating System: Windows or Android
3.3.2 RAM / Storage: Minimum 2GB / 4GB
3.3.3 Screen Size: Minimum 4.3”
3.3.4 Keyboard: Virtual or Physical
3.3.5 Battery Style: Internal
3.3.6 Connectivity: Long Term Evolution (LTE), Bluetooth, and Wireless Fidelity (WIFI)
3.3.7 Ingress Protection (IP) Rating: IP65 per IEC 60529.
3.4 GNSS
3.4.1 Space Vehicle Constellations Supported: GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS
3.4.2 Accuracy Positioning: Maximum 10mm Horizontal & 15mm Vertical
3.4.3 Tilt Compensation: Inertial Measurement Unit (IMU)
3.4.4 Connectivity: Ultra High Frequency (UHF) Radio, LTE, and Bluetooth
3.5 Digital Level
3.5.1 Accuracy: Maximum 0.7mm per Kilometer according to ISO 17123-2 test method
3.5.2 Measurement Range: Up to 100 meters or longer
3.5.3 Barcode Staff
3.5.4 Invar Rods Available
3.5.5 Magnification: Minimum 20x
3.6 Scanner
3.6.1 Stationary Scanner
a) Scan Speed: Up to 120,000 pts/sec or faster
b) Measurement range: Up to 130 meters or longer
c) Angular Accuracy: 0.005 degrees
d) IP Rating: IP54 per IEC 60529
e) Scan Time with Images: ≤ 8 minutes
3.6.2 Mobile Scanner
a) Scan Speed: Up to 2 million pts/sec or faster
b) Measurement Range: Up to 180 meters or longer
c) Cameras Resolutions: Minimum 12MP
d) Positioning Method: GNSS and IMU
e) Scan Lines/sec: ≥ 250
| 1. Scope |
| 2. Regulations, Codes, and Standards |
| 2.1 Regulations |
| 2.1.1 N/A |
| 2.2 Codes |
| 2.2.1 N/A |
| 2.3 Standards |
| 2.3.1 International Electrotechnical Commission (IEC) 60825-1: Safety of laser products - Part 1: Equipment classification and requirements |
| 2.3.2 American National Standards Institute (ANSI) Z136.1: Degrees of Protection Provided by Enclosures |
| 2.3.3 International Electrotechnical Commission (IEC) 60529: Degrees of Protection Provided by Enclosures |
| 2.3.4 Global Positioning System (GPS) |
| 2.3.5 Global Navigation Satellite System, aka Globalnaya Navigatsionnaya Sputnikovaya Sistema (GLONASS) |
| 2.3.6 Galileo Satellite System (GALILEO) |
| 2.3.7 Big Dipper, aka BeiDou Navigation Satellite System (BEIDOU) |
| 2.3.8 Satellite-Based Augmentation System (SBAS) |
| 2.3.9 Quasi-Zenith Satellite System (QZSS) |
| 2.3.10 International Organization for Standardization (ISO) 17123-2: Optics and optical instruments — Field procedures for testing geodetic and surveying instruments |
| 3. Requirements |
| 3.1 Total Station |
| 3.1.1 Angular Accuracy: 1 – 3 arcseconds |
| 3.1.2 Robotics: Required |
| 3.1.3 Prism Tracking Technologies: Required |
| 3.1.4 Electronic Distance Measurement (EDM) Reflectorless Capabilities: Required |
| 3.1.5 Distance – Reflectorless: 50 meters or greater |
| 3.1.6 Distance – Single Prism: At least up to 800 meters |
| 3.2 Spatial Station |
| 3.2.1 Angular Accuracy: At least 3 arcseconds |
| 3.2.2 Robotics: Required |
| 3.2.3 Scan Rate: 25,000 points/second (pts/sec) |
| 3.2.4 Laser Class: 3R per IEC 60825-1 or ANSI Z136.1 |
| 3.3 Data Collector |
| 3.3.1 Operating System: Windows or Android |
| 3.3.2 RAM / Storage: Minimum 2GB / 4GB |
| 3.3.3 Screen Size: Minimum 4.3” |
| 3.3.4 Keyboard: Virtual or Physical |
| 3.3.5 Battery Style: Internal |
| 3.3.6 Connectivity: Long Term Evolution (LTE), Bluetooth, and Wireless Fidelity (WIFI) |
| 3.3.7 Ingress Protection (IP) Rating: IP65 per IEC 60529. |
| 3.4 GNSS |
| 3.4.1 Space Vehicle Constellations Supported: GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS |
| 3.4.2 Accuracy Positioning: Maximum 10mm Horizontal & 15mm Vertical |
| 3.4.3 Tilt Compensation: Inertial Measurement Unit (IMU) |
| 3.4.4 Connectivity: Ultra High Frequency (UHF) Radio, LTE, and Bluetooth |
| 3.5 Digital Level |
| 3.5.1 Accuracy: Maximum 0.7mm per Kilometer according to ISO 17123-2 test method |
| 3.5.2 Measurement Range: Up to 100 meters or longer |
| 3.5.3 Barcode Staff |
| 3.5.4 Invar Rods Available |
| 3.5.5 Magnification: Minimum 20x |
| 3.6 Scanner |
| 3.6.1 Stationary Scanner |
| a) Scan Speed: Up to 120,000 pts/sec or faster |
| b) Measurement range: Up to 130 meters or longer |
| c) Angular Accuracy: 0.005 degrees |
| d) IP Rating: IP54 per IEC 60529 |
| e) Scan Time with Images: ≤ 8 minutes |
| 3.6.2 Mobile Scanner |
| a) Scan Speed: Up to 2 million pts/sec or faster |
| b) Measurement Range: Up to 180 meters or longer |
| c) Cameras Resolutions: Minimum 12MP |
| d) Positioning Method: GNSS and IMU |
| e) Scan Lines/sec: ≥ 250 |
File details come from the government source that posted it. Updated .