Attachment 1(a) - Drawings.pdf
PDF 11 MB Posted
- Solicitation number
- 697DCK-24-R-00450
About this file
This document appears to be Attachment 1(a) - Drawings related to a Federal Aviation Administration (FAA) solicitation for a door replacement project at their Denver Air Route Traffic Control Center (ARTCC) located in Longmont, Colorado.
The key details of the solicitation are:
- The project is a set-aside for small businesses under NAICS code 236220 (Commercial and Institutional Building Construction) with an estimated value between $750,000 and $1,000,000.
- The work includes replacing 75 interior doors and hardware sets, replacing 340 key cores and updating the master keying system, and providing and installing new door hardware and software.
- The site visit is scheduled for July 29, 2024, questions are due by August 15, 2024, and offers are due by August 29, 2024.
- The procuring agency is the Department of Transportation Federal Aviation Administration Northwest Mountain Region.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRAWING NUMBER DESCRIPTION
ZDV 1403330 G001 COVER SHEET, VICINITY MAP AND DRAWING INDEX
ZDV 1403330 A201 AUTOMATION WING BASEMENT PLAN
ZDV 1403330 A202 CONTROL WING NORTH BASEMENT PLAN
ZDV 1403330 A203 CONTROL WING SOUTH BASEMENT PLAN
ZDV 1403330 A204 ADMINISTRATION WING BASEMENT PLAN
ZDV 1403330 A211 AUTOMATION WING FLOOR 1 PLAN
ZDV 1403330 A212 CONTROL WING NORTH FLOOR 1 PLAN
ZDV 1403330 A213 CONTROL WING SOUTH FLOOR 1 PLAN
ZDV 1403330 A214 ADMINISTRATION WING FLOOR 1 PLAN
ZDV 1403330 A221 AUTOMATION WING FLOOR 2 PLAN
ZDV 1403330 A223 CONTROL WING SOUTH FLOOR 2 PLAN
ZDV 1403330 A224 ADMINISTRATION WING FLOOR 2 PLAN
ZDV 1403330 A801 DOOR SCHEDULE AUTOMATION WING
ZDV 1403330 A802 DOOR SCHEDULE CONTROL WING
ZDV 1403330 A803 DOOR SCHEDULE ADMINISTRATION WING
ZDV 1403330 A804 DOOR SCHEDULE EXTERIOR DOORS
ZDV 1403330 A805 DOOR SCHEDULE CONTROL WING FLOOR 1
DRAWING INDEX
PHILLIP BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:07:05 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:37:10 -07'00'
PHILLIP BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:09:29 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:11:37
BANNAVONG
Date: 2024.05.03 13:11:19 -07'00'
Digitally signed by
CALLEN R COLLINS
Date: 2024.05.06 07:06:44
BANNAVONG
Date: 2024.05.03 13:13:10 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:01:42
BANNAVONG
Date: 2024.05.03 13:15:17 -07'00'
Digitally signed by
CALLEN R COLLINS
Date: 2024.05.06 06:41:30
BANNAVONG
Date: 2024.05.03 13:17:20 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 06:48:19
BANNAVONG
Date: 2024.05.03 13:19:19 -07'00'
Digitally signed by
CALLEN R COLLINS
Date: 2024.05.06 06:36:02
BANNAVONG
Date: 2024.05.03 13:21:14 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 06:52:12
BANNAVONG
Date: 2024.05.03 13:23:44 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 06:57:31
BANNAVONG
Date: 2024.05.03 13:25:24 -07'00'
Digitally signed by
CALLEN R COLLINS
Date: 2024.05.06 06:44:50
BANNAVONG
Date: 2024.05.03 13:27:37 -07'00'
Digitally signed by
CALLEN R COLLINS
Date: 2024.05.06 07:14:28
BANNAVONG
Date: 2024.05.03 13:29:13 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:29:36
C
LA
SS
R
O O
M
ST
O
R
ER
O O
M
PA
SS
A G
E
O
FF
IC
E
60 A201 B10A V HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR 60 C 1, 2, 3, 11, 13
71 A201 STAIR-B V HM 1 3'-0" 7'-0" 1-3/4" LH 90 C 3, 13
72 A201 13A F HM 1 3'-0" 7'-0" 1-3/4" LH 90 D 3, 12
78 A201 B12A F HM 1 4'-0" 7'-0" 1-3/4" LH D 3
102 A211 STAIR-A V HM 1 3'-0" 7'-0" 1-3/4" LH 60 C 9, 10, 13
103 A211 106A V HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR B 1, 2, 3, 13
104 A211 109A V HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR B 1, 2, 3, 13
110 A211 119A V HM 1 3'-0" 7'-0" 1-3/4" RHR B 1, 2, 3, 13
117 A211 STAIR-B V HM 1 3'-0" 7'-0" 1-3/4" RHR 90 C 3
118 A211 STAIR F HM 1 3'-0" 7'-0" 1-3/4" RHR D 3
119 A211 120A F HM 1 3'-0" 7'-0" 1-3/4" LHR 90 D 3
128 A211 106A F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR D 3
201 A221 A254 V HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR C 3
202 A221 STAIR-A V HM 1 3'-0" 7'-0" 1-3/4" LH 90 C 3, 10, 13
203 A221 A254 F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR D 3, 10, 13
204 A221 A241 V HM 1 3'-0" 7'-0" 1-3/4" LH F 3, 10, 13
205 A221 A243 V HM 1 3'-0" 7'-0" 1-3/4" LHR F 3, 10, 13
206 A221 ELECT F HM 1 3'-0" 7'-0" 1-3/4" LH D 3, 10, 13
207 N/A CLOSET F HM 1 3'-0" 7'-0" 1-3/4" LH D 3, 10, 12, 13
208 A221 A220 F HM 1 3'-0" 7'-0" 1-3/4" LH D 3, 10
211 A221 A219 F HM 1 3'-0" 7'-0" 1-3/4" RH D 3, 10
212 A221 A216 V HM 1 3'-0" 7'-0" 1-3/4" RHR F 3, 10
213 A221 A217 F HM 1 3'-0" 7'-0" 1-3/4" RHR D 3, 10
215 A221 A217 V HM 1 3'-0" 7'-0" 1-3/4" LH 90 C 3, 13
216 A221 A218 F HM 1 3'-0" 7'-0" 1-3/4" LHR D 3, 10
217 A221 A242 F HM 2 6'-0" 7'-0" 1-3/4" RH F 3, 10
218 A221 A247 V HM 1 3'-0" 7'-0" 1-3/4" LHR / RHR C 3
229 A221 A240 F HM 1 3'-0" 7'-0" 1-3/4" LH F 3
PS
SND
IN
SU
LA
TI
O N
N O
. O F
LE
A
VE
S
W
ID
TH
Install signage - "Restricted Access" Install signage - "Restricted Access"
H
EI
G H
T
DOOR SCHEDULE - AUTOMATION WING
D O
O R
N U
M B
ER
FO
U
N D
O N
S H
EE
T
R O
O M
N U
M B
ER
DOORS
FI
R
E R
A
TI
N G
M
IN
U
TE
S)
O N
C R
IT
IC
A L
FI
R
E B
A R
R
IE
R
H A
R D
W A
R E
SE
T
G
LA
ZI
N
G
SE
C
U R
IT
Y
H A
R D
W A
R E
TY
PE
M A
TE
R
IA
L
Install signage - "Housekeeping Closet"
Replace threshold.
TH
IC
K N
ES
S
HANDING
LEVERSET FUNCTION
Electric strike on passive leaf.
Install signage - "EXIT" Crit barrier electrical room, louver
K
IC
K P
LA
TE
S
LO
U
VE
R
NOTE NUMBER REMARKS
Install signage - "Sprinkler Control" Install signage - "Stairwell A"
Double door - Touch bar.
Install signage - "Stairwell A"
Install new floor dome-stop Install signage - "Stairwell B, Door #'
Install signage - "NOT an EXIT"
Drop-stop; leverset appears as-new
DOOR SCHEDULE NOTES:
Unless otherwise noted, install new double door sets without fixed mullions.
Coordinate with FAA's Security Systems Design & Integration (SSDI) Contractor for door access control system Reuse PIV card access hardware.
Possible door brands but not limited to: Currie, Mesker or Pioneer
INSULATION
Polystyrene Sound
HINGE LOCATION (SITE VERIFY)
TOP: 4-7/8" MIDDLE: 37-1/8" BOTTOM: 96-3/8"
Reuse hollow metal (HM) door frame. Patch holes, dents, remove dust, apply paint and rust prevention according to ANSI/SDI A 250.8 Guidelines. Replace frame if no longer plumb.
Replace Threshold.
Install door assembly with fire rated door gaskets.
Replace frame only, no new door leafs.
Although existing assembly contains astragal, do not install astragal on new assembly.
Glazing Vision Panels 6" x 27" unless noted otherwise.
Hazardous material containing door assembly. Handle with care and follow industry protocol for demolition and transport.
Replace entire door and frame assembly Reuse existing lockset Requires 34" x 34" Kickplate Flush mount fixed slat louver required
PHILLIP
BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:31:19 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:34:41
SS
R
O O
M
ST
O
R
ER
O O
M
PA
SS
A G
E
O
FF
IC
E
26 A202 B101 F HM 1 3'-0" 7'-0" 1-3/4" LH D 1, 2, 3
29 A202 B101 F HM 1 3'-0" 7'-0" 1-3/4" RHR D 9
35 A202 B101 V HM 1 3'-0" 7'-0" 1-3/4" RH 60 C 1, 2, 3, 4 Install Signage - "Restricted Access"
47 A203 B134A F HM 1 3'-0" 7'-0" 1-3/4" LH D 3
48 A203 B134A F HM 2 6'-0" 7'-0" 1-3/4" LH/RH D 3
101 A212 1002 V HM 2 6'-0" 7'-0" 1-3/4" 6
102 A213 UTIL V HM 1 3'-0" 7'-0" 1-3/4" RHR D 3
104 A212 1025 F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR D 3, 7
104 A213 MENS V HM 1 3'-0" 7'-0" 1-3/4" LH D 3 Mens restroom entrance door.
107 A213 CLOSET F HM 1 3'-0" 7'-0" 1-3/4" RH D 3, 12
108 A213 UTIL F HM 1 3'-0" 7'-0" 1-3/4" RHR 45 D 3
109 A213 1031B F HM 1 3'-0" 7'-0" 1-3/4" RHR D 3
117 A212 1001B V HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR D 3, 12
202 A223 A240 V HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR C 3
203 A223 ROOF F HM 1 3'-0" 7'-0" 1-3/4" F 1, 9
204 A223 ROOF F HM 1 3'-0" 7'-0" 1-3/4" RH D 1, 8, 9
205 A223 UTIL F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR D 3
PS
SND
DOOR SCHEDULE - CONTROL WING
D O
O R
N U
M B
ER
FO
U
N D
O N
S H
EE
T
R O
O M
N U
M B
ER
DOORS
FI
R
E R
A
TI
N G
M
IN
U
TE
S)
O N
C R
IT
IC
A L
FI
R
E B
A R
R
IE
R
H A
R D
W A
R E
SE
T
G
LA
ZI
N
G
SE
C
U R
IT
Y
H A
R D
W A
R E
TY
PE
M A
TE
R
IA
L
IN
SU
LA
TI
O N
N O
. O F
LE
A
VE
S
TH
IC
K N
ES
S
HANDING
LEVERSET FUNCTION
PIV Card Reader
W
ID
TH
REMARKSH
EI
G H
T
Requires 34" x 34" Kickplate Flush mount fixed slat louver required Glazing Vision Panels 6" x 27" unless noted otherwise.
K
IC
K P
LA
TE
S
LO
U
VE
R
NOTE NUMBER
Reuse PIV card access hardware.
Double door. Auto flush bolts, coordinator
Roof access - instatuation lockset
ASBESTOS CONTAINING MATERIAL (ACM) DOOR.
Requires sweeps and manual flush bolts
DOOR SCHEDULE NOTES:
Unless otherwise noted, install new double door sets without fixed mullions.
Coordinate with FAA's Security Systems Design & Integration (SSDI) Contractor for door access control system
Replace frame only, no new door leafs.
Althrough existing assembly contains astragal, do not install astragal on new assembly.
Hazardous material containing door assembly. Handle with care and follow industry protocol for demolition and transport.
Replace entire door and frame assembly Reuse existing lockset
Possible door brands but not limited to: Currie, Mesker or Pioneer
INSULATION
Polystyrene Sound
TOP: 4-7/8" MIDDLE: 37-1/8" BOTTOM: 96-3/8"
HINGE LOCATION (SITE VERIFY)
Replace threshold.
Install door assembly with fire rated door gaskets.
Reuse hollow metal (HM) door frame. Patch holes, dents, remove dust, apply paint and rust prevention according to ANSI/SDI A 250.8 Guidelines. Replace frame if no longer plumb.
Install Signage - "NOT an EXIT" Install Signage - "NOT an EXIT" No doors, frame repair only
Double door. Auto flush bolts, coordinator
Custodial closet, louver required.
PHILLIP BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:33:10 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:32:18
SS
R
O O
M
ST
O
R
ER
O O
M
PA
SS
A G
E
O
FF
IC
E
1 A204 B103 F HM PS 1 3'-0" 7'-0" 1-3/4" RH 90 F 3, 10, 12
2 A204 B103A F HM PS 1 3'-0" 7'-0" 1-3/4" RH 90 F 3, 10
3 A204 B102A V HM PS 1 3'-6" 7'-0" 1-3/4" RH D 3, 11, 13
5 A204 STAIR-1 V HM PS 1 3'-0" 7'-0" 1-3/4" LH 90 C 3. 13
8 A204 B104 F HM PS 1 3'-0" 7'-0" 1-3/4" RH F 3
21 A204 B115 F HM PS 1 3'-0" 7'-0" 1-3/4" RH F 3
102 A214 STAIR-1 V HM PS 1 3'-0" 7'-0" 1-3/4" LHR 90 C 3, 13
111 A214 1007 F HM PS 1 3'-0" 7'-0" 1-3/4" LHR B 1, 2, 3
121 A214 1033 N/A HM PS 0 6'-0" 7'-0" 1-3/4" 6
123 A214 1044 V HM PS 2 6'-0" 7'-0" 1-3/4" LH/RH 3, 11, 13
125 A214 1037 F HM PS 1 3'-0" 7'-0" 1-3/4" LH F 3, 12
126 A214 1037 F HM PS 1 3'-0" 7'-0" 1-3/4" LH F 3, 13
134 A214 1036 F HM PS 1 3'-0" 7'-0" 1-3/4" RHR 3, 12
135 A214 1036 V HM PS 1 3'-0" 7'-0" 1-3/4" RHR 90 C 3, 11, 13
202 A224 STAIR-1 V HM PS 1 3'-0" 7'-0" 1-3/4" RH 90 C 3, 13
211 A224 2018 F HM PS 1 3'-0" 7'-0" 1-3/4" RHR 90 B 1, 2, 3
PS
SND
Requires 34" x 34" Kickplate Flush mount fixed slat louver required
INSULATION
Polystyrene Sound
HINGE LOCATION (SITE VERIFY)
TOP: 4-7/8" MIDDLE: 37-1/8" BOTTOM: 96-3/8"
Possible door brands but not limited to: Currie, Mesker or Pioneer
Replace frame only, no new door leafs.
Althrough existing assembly contains astragal, do not install astragal on new assembly.
Hazardous material containing door assembly. Handle with care and follow industry protocol for demolition and transport.
Replace entire door and frame assembly Reuse existing lockset
IN
SU
LA
TI
O N
Coordinate with FAA's Security Systems Design & Integration (SSDI) Contractor for door access control system
Install signage - "Restricted Area"
Kitchen double swing doors w/ push & pull plates
DOOR SCHEDULE NOTES:
Unless otherwise noted, install new double door sets without fixed mullions.
Push & pull plates.
Standard Closer sufficient, infrequent light use.
DOOR SCHEDULE - ADMINISTRATION WING
D O
O R
N U
M B
ER
FO
U
N D
O N
S H
EE
T
R O
O M
N U
M B
ER
FI
R
E R
A
TI
N G
M
IN
U
TE
S)
O N
C R
IT
IC
A L
FI
R
E B
A R
R
IE
R
LEVERSET FUNCTION
DOORS
REMARKSH
EI
G H
T
TH
IC
K N
ES
S
HANDING H
A
R D
W A
R E
SE
T
TY
PE
M A
TE
R
IA
L
LO
U
VE
R
NOTE NUMBER
Door Louver required
Exercise room
N O
. O F
LE
A
VE
S
W
ID
TH
G
LA
ZI
N
G
SE
C
U R
IT
Y
H A
R D
W A
R E
K
IC
K P
LA
TE
S
Glazing Vision Panels 6" x 27" unless noted otherwise.
Reuse hollow metal (HM) door frame. Patch holes, dents, remove dust, apply paint and rust prevention according to ANSI/SDI A 250.8 Guidelines. Replace frame if no longer plumb.
Replace Threshold.
Install door assembly with fire rated door gaskets.
Reuse PIV card access hardware.
5-inch hinges
PHILLIP BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:35:08 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:27:03
SS
R
O O
M
ST
O
R
ER
O O
M
PA
SS
A G
E
O
FF
IC
E
M-3 A212 STAIR-3 F HM 1 3'-0" 7'-0" 1-3/4" LHR / RHR C 1, 2, 3, 4, 6
M-4 A221 202 F HM 1 3'-0" 7'-0" 1-3/4" RHR C 1, 2, 3, 4, 6
M-5 A211 112 F HM 1 3'-0" 7'-0" 1-3/4" RHR A 1, 2, 3, 4, 6
M-6 A211 FG HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR E 1, 2, 3, 4, 6
M-7 A201 B13A F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR C 1, 2, 3, 4, 6
M-8 A201 B12A F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR A 1, 2, 3, 4, 6
M-9 A211 120A F HM 1 3'-0" 7'-0" 1-3/4" RHR C 1, 2, 3, 4, 6
M-10 A211 STAIR-B F HM 1 3'-0" 7'-0" 1-3/4" RHR A 1, 2, 3, 4, 6
M-11 A213 STAIR-9 F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR C 1, 2, 3, 4, 6
M-12 A213 1049 F HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR A 1, 2, 3, 4, 6, 11
M-13 A213 1047 FG HM 2 6'-0" 7'-0" 1-3/4" LHR / RHR E 1, 2, 3, 4, 6
M-16 A214 1036 F HM 1 3'-0" 7'-0" 1-3/4" RHR C 1, 2, 3, 4, 6
M-17 A214 STAIR-6 HM 1 3'-0" 7'-0" 1-3/4" RHR C 1, 2, 3, 4, 6
M-18 A214 FG HM 2 6'-0" 7'-0" 1-3/4" RHR 3, 4 Requires concrete repair beneath threshold; remove abandoned electric strike, repair frame at strike.
PS
SND
IN
SU
LA
TI
O N
N O
. O F
LE
A
VE
S
W
ID
TH
K
IC
K P
LA
TE
S
H
EI
G H
T
TH
IC
K N
ES
S
HANDING
LEVERSET FUNCTION
DOOR SCHEDULE - EXTERIOR DOORS
D O
O R
N U
M B
ER
FO
U
N D
O N
S H
EE
T
R O
O M
N U
M B
ER
DOORS
FI
R
E R
A
TI
N G
M
IN
U
TE
S)
O N
C R
IT
IC
A L
FI
R
E B
A R
R
IE
R
H A
R D
W A
R E
SE
T
G
LA
ZI
N
G
SE
C
U R
IT
Y
H A
R D
W A
R E
TY
PE
M A
TE
R
IA
L
Double HM, electric strike, threshold, manual flushbolts, 4ea hinges, pull handle on active leaf, cane holds on each leaf <E> = Double glass storefront, transom, touch bars, pull handles - one with rim, top/bottom pivots, off master key (lock function unkown), prefer Security monitoring, threshold
LO
U
VE
R
NOTE NUMBER REMARKS
Replace frame only, no new door leafs.
Althrough existing assembly contains astragal, do not install astragal on new assembly.
Touchbar to surface latch, continuous hinge (steel frame damaged), threshold, HD closer, mortise trim
DOOR SCHEDULE NOTES:
Unless otherwise noted, install new double door sets without fixed mullions.
Coordinate with FAA's Security Systems Design & Integration (SSDI) Contractor for door access control system Reuse PIV card access hardware.
Touch bar w/ surface latch, security monitoring, threshold
Touch bar w/ surface latch, threshold, sweep Electric touch bar w/ suface latch, threshold, sweep <E> = Double storefront glass, pivots, touch bars w/ concealed rods, threshold, offset pull handles Manual flushbolts, threshold, transom HM frame Card Reader, manual flushbolts, threshold, transom HM frame Touch bar w/ surface latch, security monitoring, sweep Card Reader, touch bar w/ surface latch, threshold Touch bar w/ surface latch, threshold, sweep
Glazing Vision Panels 6" x 27" unless noted otherwise.
Sound
Hazardous material containing door assembly. Handle with care and follow industry protocol for demolition and transport.
Replace entire door and frame assembly
Requires 34" x 34" Kickplate Reuse existing lockset
HINGE LOCATION (SITE VERIFY)
TOP: 4-7/8" MIDDLE: 37-1/8" BOTTOM: 96-3/8"
Possible door brands but not limited to: Currie, Mesker or Pioneer
INSULATION
Polystyrene
Flush mount fixed slat louver required
Install door assembly with fire rated door gaskets.
Reuse hollow metal (HM) door frame. Patch holes, dents, remove dust, apply paint and rust prevention according to ANSI/SDI A 250.8 Guidelines. Replace frame if no longer plumb.
Replace Threshold.
PHILLIP BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:36:49 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:25:11
Door Hardware Schedules
Requirement Hardware Set All Doors Products (Or Approved Equal)
Requirement Hardware Set D Products (Or Approved Equal) Requirement Hardware Set H Products (Or Approved Equal)
Security Reuse all SSDI components Exit Device Lever handle style, Satin Stainless steel or satin chrome, compatible with Best CorMax interchangeable cores.
Best 9K Series
ADA Closures: Calibrate all closures to be ADA compliant. Hinge Hinges (3): Stainless Steel, 4-1/2” by 4 – 1/2”, Standard weight 2 sets of ball bearings, 5 knuckle, Flat Button Tips, Full Mortise, Non-Removable Pin (NRP)
Hager US26D
Closer Heavy Duty Mechanical Closer Sargent 351
Infrastructure Door Identification, both sides. Match Existing
Core Best CorMax Core to receive type X key:
1CX7XC11626
Best CorMax
Requirement Hardware Set A – Exterior Single or Double Doors Products (Or Approved Equal) Requirement Hardware Set E Products (Or Approved Equal)
Exit Device Touch bar w/ Surface rod or surface latch, electric latch release except as noted in Door Schedule.
Adams Rite P8800, Hager 4500 series
Exit Device Touch bar with concealed vertical rod exit device. Adams Rite 8500/3600
Cylinder Rim cylinder housing w/ escutcheon compatible with exit device and Best CorMax interchangeable cores;
Storeroom function.
Arrow 16RCR-16 Cylinder Rim cylinder housing compatible with exit device and Best CorMax interchangeable cores. Storeroom function.
Best 1E Series
Hinge Hinges (3): Stainless Steel, 4-1/2" by 4 - 1/2", Standard weight 2 sets of ball bearings, 5 knuckle, Flat Button Tips, Full Mortise, Non-Removable Pin (NRP)
Hager US26D Hinge Heavy Duty Hinges: Stainless Steel, 4-1/2” by 4 – 1/2”, Heavy weight 4 sets of ball bearings, 5 knuckle, Flat Button Tips, Full Mortise, Non-Removable Pin (NRP)
Hager BB1199
Closer Heavy Duty Mechanical Closer Sargent 351 Closer Heavy Duty Mechanical Closer Sargent 351
Weather Door Bottom Shoe with Rain Drip Pemko 216_V, Hager 745S
Requirement Hardware Set B - Interior Security Doors Products (Or Approved Equal) Requirement Hardware Set F Products (Or Approved Equal)
Exit Device Mechanical Touch bar w/ Surface rod, electric latch release
Adams Rite 8300, Hager 4500 series Exit Device Lever handle style, Satin Stainless steel or stain chrome, compatible with Best CorMax interchangeable cores.
Best 9K Series
Cylinder Rim cylinder housing compatible with exit device and Best CorMax interchangeable cores. Storeroom function.
Best 1E Series Hinge Hinges (3): Stainless Steel, 4-1/2” by 4 – 1/2”, Standard weight 2 sets of ball bearings, 5 knuckle, Flat Button Tips, Full Mortise, Non-Removable Pin (NRP)
Hager US26D
Hinge Hinges (3): Stainless Steel, 4-1/2" by 4 - 1/2", Standard weight 2 sets of ball bearings, 5 knuckle, Flat Button Tips, Full Mortise, Non-Removable Pin (NRP)
Hager US26D
Closer Heavy Duty Mechanical Closer Sargent 351
Requirement Hardware Set C - Interior Exit Doors Products (Or Approved Equal) Requirement Hardware Set G Products (Or Approved Equal)
Exit Device Mechnical Touch bar w/ Surface rod of Surface Latch Hager 4500 Series Exit Device Lever handle style, Satin Stainless steel or stain chrome, compatible with Best CorMax interchangeable cores.
Best 9K Series
Hinge Hinges (3): Stainless Steel, 4-1/2” by 4 – 1/2”, Standard weight 2 sets of ball bearings, 5 knuckle, Flat Button Tips, Full Mortise, Non-Removable Pin (NRP)
Hager US26D Hinge Continuous Hinge: Heavy duty, full mortise, stainless steel or clear anodized aluminum finish
Hager 780-224HD
Closer Heavy Duty Mechanical Closer Sargent 351 Closer Heavy Duty Mechanical Closer Sargent 351
** Continuous hinge only exists in one project location, Stair A, Auto Wing, door #102, recommend door frame repair & Hardware Set C
Lever handle style, Satin Stainless steel or stain chrome, compatible with Best CorMax interchangeable cores.
Doors receiving replacement leverset:
- M-13: Loading Dock
- 101: Control Wing Door
- Stair #2 Basement Level Closet
Exit Device Best 9K Series
Infrastructure Ives 8400 Series
Kick Plates: Add kick plates as noted on door schedule. 10" by 34" by .050" - US32D Stainless Steel (For 36" - 48" Wide Door) or 34" by 34" by 0.50" US32D Stainless steel as noted on schedule, made in the USA
PHILLIP BANNAVONG
Digitally signed by PHILLIP
BANNAVONG
Date: 2024.05.03 13:38:14 -07'00'
Digitally signed by CALLEN
R COLLINS
Date: 2024.05.06 07:22:44
| zdv-1403330-g001 |
| zdv-1403330-a201 |
| zdv-1403330-a202 |
| zdv-1403330-a203 |
| zdv-1403330-a204 |
| zdv-1403330-a211 |
| zdv-1403330-a212 |
| zdv-1403330-a213 |
| zdv-1403330-a214 |
| zdv-1403330-a221 |
| zdv-1403330-a223 |
| zdv-1403330-a224 |
| zdv-1403330-a801 |
| zdv-1403330-a802 |
| zdv-1403330-a803 |
| zdv-1403330-a804 |
| zdv-1403330-a805 |
File details come from the government source that posted it. Updated .