Attachment 13 - F015226689.pdf

PDF 1 MB Posted

Attached to
Rocket Assisted Take Off (RATO) motors and initiators for the BQM-167A Aerial Target Drone
Solicitation number
FA821324RB011
Issued by

About this file

Written by GovTribe AI ·

This document is an attachment related to a federal contract opportunity for Rocket Assisted Take Off (RATO) motors and initiators for the BQM-167A Aerial Target Drone. The attachment provides detailed construction and packaging requirements for the RATO motors, including the use of 3/8" plywood, adhesive, desiccant, and humidity indicators. It also specifies international standards for wood packaging material (WPM) that must be met, including debarking, heat-treatment, and certification.

The related federal contract opportunity is a pre-solicitation to establish a 5-year IDIQ firm-fixed price contract for the procurement of RATO motors and initiators. The U.S. Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base is the contracting agency. The draft solicitation, including proposed clauses and attachments, has been released, but the government reserves the right not to award a contract. Interested parties must become qualified in order to be considered a technically acceptable source, per the JQR documents listed in the attachments.

View the file

Other files

File Type Posted
Contractor Feedback and Governemnt Response (002).docx DOCX document
Contractor Feedback and Governemnt Response.docx DOCX document
Attachment 4 - REPSHIP.pdf PDF
Attachment 5 - ES7034 Rework Repair.pdf PDF
Attachment 20 Section L.pdf PDF
Draft Solicitation - FA821324RB011.pdf PDF
Attachment 16 - JQR RATO Initiator Aug2023.pdf PDF
Attachment 3 - ES7035 Description Sheets.pdf PDF
Attachment 9 - ES6925 (MSE) RATO.pdf PDF
Attachment 17 - RATO Performance Spec SP201308358 Rev D.pdf PDF
Attachment 7 - RESERVED.pdf PDF
Attachment 6 - RESERVED.pdf PDF
Attachment 11 - F002800272.pdf PDF
Attachment 18 - Packaging SOW.pdf PDF
Attachment 14 - FD2020-23-51115 CDRLs.pdf PDF
Attachment 10 - Critical Characteristics Rev Date 23 Sept 2024.pdf PDF
Attachment 1 - FD2020-23-51115 AirSpec.pdf PDF
Attachment 2 - SOW ADC.pdf PDF
Attachment 21 Section M.pdf PDF
Attachment 12 - F013448642.pdf PDF
Attachment 19 - Pricing Table RATO.pdf PDF
Attachment 15 - JQR RATO Rocket Motor Aug2023.pdf PDF
Attachment 8 - RLU-2B- FAT (Contractor Testing).pdf PDF
Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DO NOT USE STAPLES FOR ASSEMBLY

OF WOODEN CONTAINERS.

MINIMUM OF 3/8 PLYWOOD MUST BE

USED FOR CONSTRUCTION

CONSTRUCTION NOTICES:

CONTROLLED BY: 406 SCMS

CONTROLLED BY: GULAA-HILL AFB

CONTROLLED BY: CUI/SP-CTI

DISTRIBUTION/DISSEMINATION CONTROL: FEDCON

POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

CUI

MUNITION NOTICES

NOTICE 1 : ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

NOTES

1. USE ADHESIVE A-A-1936 OR EQUAL TO ATTACH FELT STRIPS, REF.-9, TO SADDLES, REF.-4.

2. WRAP ROCKET MOTOR WITH REF.-16 AND TAPE CLOSED WITH REF.-17. WRAP DESICCANT, REF.-19, USING REF.-16 AND TAPE USING REF.-17. PLACE ROCKET MOTOR AND DESICCANT IN CENTER OF BARRIER BAG, REF.-15.

3. TAPE HUMIDITY INDICATOR, REF.-20, TO END OF WRAPPED ROCKET MOTOR WITH REF.-17.

4. PLACE TACKY TAPE, REF.-18, INSIDE END OF BARRIER BAG, REF.-15, REMOVE AIR AND CLOSE. USE ALUMINUM TAPE, REF.-21, ON OUTSIDE EDGE OF BAG AS A SECONDARY SEAL.

5. ROCKET MOTOR 1340-20-010-2373 MUST BE PACKED WITH WIRE HARNESS PN: 689-18780-1.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

File details come from the government source that posted it. Updated .