Attachment 1 - Statement of Need - Dated 28 July 2026.pdf

28 July 2026

Statement of Need

Fiber Laser

McConnell AFB, Kansas

1. Overview

1.1 The 22 MXG requires the purchase of a Fiber Laser primarily used for efficient etching of tools ranging from small to medium sized. Item Number: P155GA009-SD or equal.

2. Requirements

2.1 The contractor shall provide one (1) Fiber Laser with the following features:

2.1.1. The laser system must have the following:

A. must have low voltage of 110/115 VAC 15 amp B. must be able to etch clearly on small tools C. must be fully self-contained D. must have dimensions of 28” W x 16” D x 23.5” H E. must have capability to etch larger items (i.e an extended back) F. must have an embedded computer G. must have a CDRH Class 3R laser H. must fit on a tabletop

2.2 The contractor shall assemble and deliver all items listed above. If any item is damaged or not working properly it will be replaced or fixed by the contractor and should be covered under all warranties listed below.

2.3 The contractor shall provide one-day onsite training for AMXS personnel.

3. Warranty

3.1 The contractor shall provide a minimum of 1 year warranty for the laser system. Any defect that is not caused by government damage or misuse shall be replaced by the contractor at no cost to the government.

4. Delivery

4.1 The contractor shall complete delivery and installation of each line item no later than 60 calendar days after receipt of the order.

5. ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS)

5.1 Contractors shall not:

5.1.1 Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or

5.1.2 Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order.

5.1.3 For the purposes of Department of the Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086[AR2] ) are Class I ODSs

a. Halons: 1011, 1202, 1211, 1301, and 2402;

b. Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and

c. Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide.

http://static.e-publishing.af.mil/production/1/af_a4/publication/afi32-7086/afi32-7086.pdf https://usaf.dps.mil/sites/AFCC/AQCP/KnowledgeCenter/SitePages/DAF-Contracting-Compass/Part-23---Environment%2C-Sustainable-Acquisition%2C-and-Material-Safety.aspx?CID=d7c975cb-ed41-49ba-8b44-9279666ee32b&_msocom_2