Attachment 1-Specification-HEALY DS FY25 R1.pdf

USCGC HEALY (WAGB 20)

SPECIFICATION FOR DOCKSIDE REPAIRS

FY2025

Developed By: Sarah L Passilla

(Rev-1, 01 June 2024)

USCGC HEALY (WAGB-420) DOCKSIDE AVAILABILITY FY2025

ii (Draft-0)

TABLE OF CONTENTS

Revisions Record .......................................................................................................................................... iv Consolidated List of References .................................................................................................................... v Consolidated List of Government-furnished Property ............................................................................. xvii Consolidated List of Critical Inspection Items ........................................................................................... xxi Principal Characteristics .......................................................................................................................... xxiii General Requirements WORK ITEM 1: U/W Body, Diver Inspect WORK ITEM 2: Talon Grid (Type 18-22-01), Inspect and Test WORK ITEM 3: Boiler, Annual Maintenance WORK ITEM 4: Aft Crane (Port), Annual Inspect and Repair WORK ITEM 5: Bow Crane, Annual Inspect and Test WORK ITEM 6: A-Frames, Biennial Inspection WORK ITEM 7: Aft Crane (Starboard), Annual Inspect and Repair WORK ITEM 8: 04 Deck Cranes (Port & Starboard) TB 100-55, Annual Inspect and Test WORK ITEM 9: Port & Starboard Miranda Davit, Annual Inspect and Repair WORK ITEM 10: Internal Hoists, Annual Inspect and Lubricate WORK ITEM 11: Cargo Handling Elevator, Dynamic & Modified Weight Test WORK ITEM 12: Crane Cab, Overhaul WORK ITEM 13: Tanks (Aviation Fuel Stowage/Service and Overflow), Clean and Inspect WORK ITEM 14: Tanks, Potable Water, Clean and Inspect WORK ITEM 15: Tanks, Ballast, Preserve, 100 Percent WORK ITEM 16: Contaminated Freshwater Tank, Repairs WORK ITEM 17: Cofferdam, Preserve WORK ITEM 18: Fuel Oil Purifier (FOP) Overhaul WORK ITEM 19: Lube Oil Purifier (LOP) Overhaul WORK ITEM 20: Science Seawater System Ice Grinder, Installation WORK ITEM 21: Cofferdam, Install WORK ITEM 22: Evaporators, Overhaul WORK ITEM 23: Geislinger Coupling, 20,000-hour Service WORK ITEM 24: Oceanographic Winch, Inspect and Test WORK ITEM 25: Trawl / Core Winch, Inspect and Test WORK ITEM 26: Damage Control and Firefighting Systems, PMS WORK ITEM 27: Screens, Preserve (Powder Coating) WORK ITEM 28: Raised Watertight Hatch 6’x6’, (Walz & Krenzer D-WK-805-11), Inspect and

Maintain WORK ITEM 29: Watertight Double Door 60x96, Inspect and Overhaul WORK ITEM 30: Watertight Door 54x88, Inspect and Overhaul WORK ITEM 31: Leslie Pressure Regulating Valves, Overhaul WORK ITEM 32: Ventilation Louver Dampers, Service WORK ITEM 33: Pad Eyes, NDT Inspection WORK ITEM 34: Science Sheave Instrument, Renewal WORK ITEM 35: Deck Covering Magnesite, Renew WORK ITEM 36: Deck Covering, Flight Deck, Renew WORK ITEM 37: Deck Covering, Polymeric, Renew WORK ITEM 38: Deck Covering, Preserve (Non-Skid Broadcast Grit) WORK ITEM 39: Bulkheads, Inspect and Preserve WORK ITEM 40: Galley Ventilation Ducting, Clean and Inspect WORK ITEM 41: Fire Main Valves, Renew iii (Draft-0)

WORK ITEM 42: Steam Coil Pre-Heaters, Inspect and Test WORK ITEM 43: Steam Coil Pre-Heaters, Renew WORK ITEM 44: Flex Hose Assemblies, Renew WORK ITEM 45: Tank Level Indicator Monitor, Replace WORK ITEM 46: Science Vans Connectivity, Rip Out and Installation, performError! Bookmark not defined.

WORK ITEM 47: Stability Test WORK ITEM 48: Tenting, Provide WORK ITEM 49: Temporary Services, Provide - Cutter iv (Draft-0)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK

ITEM#

CHANGES MADE

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

v (Draft-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 420-WAGB-508-002, Rev-D, Piping & Machinery Insulation Schedule L/M

Coast Guard Drawing 420 WAGB 085-002, Rev E, Tank Capacity Curves

Coast Guard Drawing 420 WAGB 085-002, Rev F, Tank Capacity Curves

Coast Guard Drawing 420 WAGB 101-016, Rev B, Construction Dwg Unit 143 & 144

Coast Guard Drawing 420 WAGB 101-017, Rev C, Construction Dwg Unit 145

Coast Guard Drawing 420 WAGB 101-048, Rev D, Construction DWG Units 603-604

Coast Guard Drawing 420 WAGB 101-068, Rev C, Construction Dwg Unit 432 & 433

Coast Guard Drawing 420 WAGB 167-002, Rev. H, Manhole List

Coast Guard Drawing 420 WAGB 259-005, Rev C, Machinery Plant Exhaust Gas Piping A & D

Coast Guard Drawing 420 WAGB 510-1, Rev E, HVAC Diagram Main Deck & Below

Coast Guard Drawing 420 WAGB 510-2, Rev H, HVAC Diagram 01 Lvl & Above

Coast Guard Drawing 420 WAGB 510-7, Rev D, HVAC Multi Louver Damper List

Coast Guard Drawing 420 WAGB 517-001, Rev A, Reserve Feed Tank

Coast Guard Drawing 420-WAGB-524_1, Rev N, Diagram Auxiliary Seawater System

Coast Guard Drawing 420-WAGB_524_3, Rev -, Science Seawater Modifications

Coast Guard Drawing 420 WAGB 573-001, Rev B, Crane Pedestals Arr & Dets

Coast Guard Drawing 420 WAGB 573-002, Rev D, Boom Rests

Coast Guard Drawing 420 WAGB 573-003, Rev A, Science Hoist

Coast Guard Drawing 420 WAGB 573-1, Rev B, Crane Pedestals Arr & Dets

Coast Guard Drawing 420 WAGB 573-2, Rev D, Boom Rests

Coast Guard Drawing 420 WAGB 573-511, Rev F, General Arrangement KB 15-45

Coast Guard Drawing 420 WAGB 573-522, Rev A, General Arrangement TB 100-55

Coast Guard Drawing 420 WAGB 573-545, Rev G, Aft. "A" Frame Base Weldment

Coast Guard Drawing 420 WAGB 573-546, Rev D, Stbd "A" Frame Base Weldment

Coast Guard Drawing 420 WAGB 573-547, Rev -, Hydraulic Cylinder Aft a-Frame

Coast Guard Drawing 420 WAGB 573-548, Rev -, Hydraulic Cylinder Starboard a-Frame

Coast Guard Drawing 420 WAGB 573-558, Rev C, Aft. "A" Frame Stop Tube Weldment

Coast Guard Drawing 420 WAGB 573-559, Rev B, Side "A" Frame Stop Tube Weldment

Coast Guard Drawing 420 WAGB 589-005, Rev B, Science Hoist Arrangement vi (Draft-0)

Coast Guard Drawing 420 WAGB 589-506, Rev C, General Arrangement Trash Hoist

Coast Guard Drawing 420 WAGB 589-507, Rev E, General Arrangement 600Stores Hoist

Coast Guard Drawing 420 WAGB 591-501, Rev E, Winch Assembly Oceanographic

Coast Guard Drawing 420 WAGB 591-501, Rev E, Winch Assembly Oceanographic

Coast Guard Drawing 420 WAGB 591-502, Rev E, Winch Assembly Traw/Core

Coast Guard Drawing 420 WAGB 630-001, Rev D, Zinc Anodes

Coast Guard Drawing 420 WAGB 631-001, Rev D, Paint Schedule & Corrosion Control

Coast Guard Drawing 420 WAGB 633-1, Rev D, Zinc Anodes

Coast Guard Drawing 420 WAGB 671-002, Rev D, CO2 Room

Coast Guard Drawing 420 WAGB 801-001, Rev B, Booklet of Drawings

Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of Drawings

Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of General Drawings

Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of General Drawings

Coast Guard Drawing 420-WAGB 573-3, Rev A, Science Hoist - FR 133 Stbd

Coast Guard Drawing 420-WAGB 591-505, Rev B, Instrumentation Sheave Installation T/C

Coast Guard Drawing 420-WAGB 591-507, Rev -, Instrumented Sheave Installation O/W

Coast Guard Drawing 420-WAGB 603-1, Rev E, Hull Markings & Draft Marks

Coast Guard Drawing 420-WAGB 801-001, Rev K, Booklet of General Drawings

Coast Guard Drawing 420-WAGB 801-1, Rev -, Booklet of General Drawings

Coast Guard Drawing 420-WAGB 801-1, Rev K, Booklet of General Drawings

Coast Guard Drawing 420-WAGB 801-10, Rev B, Curves of Form

Coast Guard Drawing 420-WAGB 839-1, Rev A, Lines Plan

Coast Guard Drawing 420-WAGB 85-2, Rev F, Tank Capacity Curves

Coast Guard Drawing 420-WAGB 97-3, Rev -, Stability Test Report (Supersedes 420 WAGB 097 002)

Coast Guard Drawing 420-WAGB 801-001, Rev K, Booklet of General Drawings

Coast Guard Drawing 420-WAGB 801-1, Rev K; Booklet of General Drawings

Coast Guard Drawing 420-WAGB-085-001, Rev G, Docking Plan

Coast Guard Drawing 420-WAGB-100-001, Rev B, Non Destructive Test Requirements

Coast Guard Drawing 420-WAGB-101-031, Rev D, Construction Drawings for Unit 402

Coast Guard Drawing 420-WAGB-101-037, Rev C, Construction Drawings for Units 446 & 447

Coast Guard Drawing 420-WAGB-101-038, Rev B, Construction Drawings for Units 448 & 449

Coast Guard Drawing 420-WAGB-101-043, Rev C, Construction Drawing Units 412 & 413

Coast Guard Drawing 420-WAGB-101-044, Rev C, Construction Drawing Units 415 & 000

Coast Guard Drawing 420-WAGB-101-055, Rev E, Construction Drawing Units 425-435

Coast Guard Drawing 420-WAGB-101-064, Rev D, Shell Expansion

Coast Guard Drawing 420-WAGB-101-065, Rev C, Construction Dwg Unit 111 & 112

Coast Guard Drawing 420-WAGB-101-069, Rev B, Construction Drawing Units 458 & 459

Coast Guard Drawing 420-WAGB-101-075, Rev C, Construction Drawing Unit 470

Coast Guard Drawing 420-WAGB-161-001, Rev A, Forefoot Casting

Coast Guard Drawing 420-WAGB-161-002, Rev D, Shaft Bossing Casting

Coast Guard Drawing 420-WAGB-161-003, Rev B, Rudder Horn vii (Draft-0)

Coast Guard Drawing 420-WAGB-161-004, Rev -, Forefoot Transition Castings

Coast Guard Drawing 420-WAGB-161-010, Rev -, Stern Tube Casting

Coast Guard Drawing 420-WAGB-163-001, Rev D, Sea Chest and Vent Modifications

Coast Guard Drawing 420-WAGB-167-001, Rev F, Hatches & Scuttles

Coast Guard Drawing 420-WAGB-167-005, Rev B, Cargo & Misc Hatches Arrg't & Installation Details

Coast Guard Drawing 420-WAGB-167-007, Rev -, Structural Doors

Coast Guard Drawing 420-WAGB-167-501, Rev A, Hydraulic Schematic Polar Icebreaker Cargo Hatch

Coast Guard Drawing 420-WAGB-167-502, Rev -, Dogging Cylinder for Polar Icebreaker Cargo Hatch

Coast Guard Drawing 420-WAGB-167-506, Rev -, Raise-Lower Cylinder 6'x6' Raised Hatch

Coast Guard Drawing 420-WAGB-167-510, Rev C, 6'x6' Raised Cargo Hatch Arrangement

Coast Guard Drawing 420-WAGB-167-511, Rev -, 6'x6' Raised Cargo Hatch Panel Assembly

Coast Guard Drawing 420-WAGB-167-512, Rev -, 6'x6' Raised Cargo Hatch Frame Assembly

Coast Guard Drawing 420-WAGB-167-513, Rev -, 6'x6' Raised Cargo Hatch Linkage Assembly &

Details

Coast Guard Drawing 420-WAGB-167-514, Rev A, 6'x6' Raised Cargo Hatch Piping Diagram

Coast Guard Drawing 420-WAGB-167-515, Rev -, Hatch Dog and Toggle Assemblies and Details

Coast Guard Drawing 420-WAGB-167-526, Rev -, Cargo Hatch Hinge Assembly Details

Coast Guard Drawing 420-WAGB-167-527, Rev -, Cargo Hatch Locking Mech. Parts & Misc. Dets

Coast Guard Drawing 420-WAGB-167-528, Rev A, Polar Icebreaker Structural Door List

Coast Guard Drawing 420-WAGB-167-529, Rev -, 9 Diameter Fixed Light

Coast Guard Drawing 420-WAGB-167-530, Rev -, Fixed Light Blackout Cover Assembly & Details

Coast Guard Drawing 420-WAGB-167-537, Rev -, Operating Handle Assembly (Operable from Inside

Only)

Coast Guard Drawing 420-WAGB-167-542, Rev -, Polar Icebreaker Mach'y Space Hatches Dog &

Toggle Ass'y & Det

Coast Guard Drawing 420-WAGB-167-546, Rev -, Doors WTDBL 60X96

Coast Guard Drawing 420-WAGB-167-548, Rev -, Doors WTDWD 54X88

Coast Guard Drawing 420-WAGB-167-549, Rev -, Bumper-Hook Assembly & Details

Coast Guard Drawing 420-WAGB-167-558, Rev -, Machinery Space Hatch Assembly Misc. Details

Coast Guard Drawing 420-WAGB-167-563, Rev A, Dogging Cylinder

Coast Guard Drawing 420-WAGB-202-001, Rev. F, Main Engine Propulsion Control and Monitoring

System Deck Plan

Coast Guard Drawing 420-WAGB-202-014, Rev. B, Miscellaneous Tank Level Indicator and Alarm

System Circuit 1TK2 Isometric Wiring Diagram

Coast Guard Drawing 420-WAGB-202-015, Rev. B, Miscellaneous Tank Level Indicator and Alarm

System Circuit 1TK2 Elementary Wiring Diagram

Coast Guard Drawing 420-WAGB-233-520, Rev E, Diesel Alternator Set

Coast Guard Drawing 420-WAGB-243-001, Rev A, Shafting Arrangements

Coast Guard Drawing 420-WAGB-243-002, Rev A, Shaft Forgings

Coast Guard Drawing 420-WAGB-243-003, Rev C, Shafting Details

Coast Guard Drawing 420-WAGB-264-001, Rev. F, Lube Oil Fill Transfer & Purification System

Coast Guard Drawing 420-WAGB-320-002, Power System One-Line Diagram

Coast Guard Drawing 420-WAGB-320-002, Rev. AW, Power System One-Line Diagram viii (Draft-0)

Coast Guard Drawing 420-WAGB-320-016, Rev-D, HVAC Power System 01 Level

Coast Guard Drawing 420-WAGB-320-017, Rev-D, HVAC Power System 02 Level

Coast Guard Drawing 420-WAGB-320-018, Rev-E, HVAC Power System 03 Level

Coast Guard Drawing 420-WAGB-320-019, Rev-C, HVAC Power System 04 Level & Above

Coast Guard Drawing 420-WAGB-424-004, Rev L, Hull Mounted Transducers Installation Details

Coast Guard Drawing 420-WAGB-424-006, Rev E, General Arrangement of Elec Equipment –

Transducer Well

Coast Guard Drawing 420-WAGB-430-002, Science Van Connectivity Ripout/Installation Block Wiring

Diagram and Details

Coast Guard Drawing 420-WAGB-430-003, Science Van Connectivity Installation Wiring Data (COED)

Coast Guard Drawing 420-WAGB-432-010 Dial Telephone System (Circuit J) Elementary Wiring

Diagram

Coast Guard Drawing 420-WAGB-433-002 Ships Public Announcing, Loudhailer, and Ships Alarm

Circuits 1MC, 5MC, and 6MC Elementary Wiring Diagram

Coast Guard Drawing 420-WAGB-436-002 Ships Fire and Smoke Detection System (CIR. SM & F)

Elementary Wiring Diagram

Coast Guard Drawing 420-WAGB-493-003, Science Data/CGSW Network System Block Wiring

Diagram

Coast Guard Drawing 420-WAGB-505-001, Rev D, Piping General Notes and Installation Details

Coast Guard Drawing 420-WAGB-506-001, Rev E, Diagram Vents, Sounds & Overflows

Coast Guard Drawing 420-WAGB-508-001, Rev F, PP & Mchry Insulation Sched

Coast Guard Drawing 420-WAGB-508-001, Rev F, PP & Mchry Insulation Schedule

Coast Guard Drawing 420-WAGB-508-001, Rev-F, PP & Machinery Insulation Schedule

Coast Guard Drawing 420-WAGB-508-002, Rev D, Piping & Machinery Insulation Schedule L/M

Coast Guard Drawing 420-WAGB-508-002, Rev D, PP & Mchry Insulation Schedule L/M

Coast Guard Drawing 420-WAGB-509-001, Rev-B, HVAC Insulation Schedule

Coast Guard Drawing 420-WAGB-509-002, Rev-B, HVAC Insulation Schedule L/M

Coast Guard Drawing 420-WAGB-510-002, Rev-H, HVAC 01 Level & Above

Coast Guard Drawing 420-WAGB-511-001, Rev-E, HVAC Heater List

Coast Guard Drawing 420-WAGB-512-021, Rev E, HVAC Arrangement Units 253, 254, 258 & 259

Coast Guard Drawing 420-WAGB-512-642, Rev-C, Coil Assy Model# 1D5-9-5610F-.5-H-B

Coast Guard Drawing 420-WAGB-512-643, Rev-D, Coil Assy Model# 1D5-12-5608F-.7-H-B

Coast Guard Drawing 420-WAGB-512-644, Rev-D, Coil Assy Model# 1D5-18-5608F-1.5-H-B

Coast Guard Drawing 420-WAGB-512-647, Rev-C, Coil Assy Model# 1D11-18-5608F-2.1-H-B

Coast Guard Drawing 420-WAGB-512-649, Rev-C, Coil Assy Model# 1D13-24-5609F-3.3-H-B

Coast Guard Drawing 420-WAGB-512-650, Rev-C, Coil Assy Model# 1D14-18-5606F-2.6-H-B

Coast Guard Drawing 420-WAGB-512-654, Rev-D, Coil Assy Model# 1D22-36-5606F-8.3-H-B

Coast Guard Drawing 420-WAGB-512-655, Rev-E, Coil Assy Model# 1D16-12-5606F-2-H-B

Coast Guard Drawing 420-WAGB-512-675, Rev-C, Coil Assy Model# 1D24-42-5604F-10.5-H-B

Coast Guard Drawing 420-WAGB-512-676, Rev-D, Coil Assy Model# 1D16-42-5604F-7-H-B

Coast Guard Drawing 420-WAGB-512-677, Rev-D, Coil Assy Model# 1D12-30-5604F-3.8-H-B

Coast Guard Drawing 420-WAGB-521-001, Rev F, Diagram Firemain System

Coast Guard Drawing 420-WAGB-530-001, Rev E, Diagram of Main Diesel Gen Cooling System ix (Draft-0)

Coast Guard Drawing 420-WAGB-535-001, Rev M, Diagram Steam, Feed & Condensate System

Coast Guard Drawing 420-WAGB-535-001, Rev-M, Diagram Steam, Feed & Condensate System

Coast Guard Drawing 420-WAGB-562-001, Rev E, Rudders Units 021 & 022

Coast Guard Drawing 420-WAGB-568-001, Rev C, Bow Thruster Installation Arrangement and Details

Coast Guard Drawing 420-WAGB-593-004, Rev B. Diagram Water, Waste Oil, and Waste Water

Collecting Systems

Coast Guard Drawing 420-WAGB-593-004, Rev. B, Diagram Oily Water Oil, and Waste Water

Collecting Systems

Coast Guard Drawing 420-WAGB-612-003, Rev E, Helicopter Safety Nets

Coast Guard Drawing 420-WAGB-621-002, Rev B, Typical Joiner Details

Coast Guard Drawing 420-WAGB-621-004, Rev C, Joiner Arr - Mn Dk

Coast Guard Drawing 420-WAGB-631-001, Rev D, Paint Schedule & Corrosion Control

Coast Guard Drawing 420-WAGB-634-001, Rev C, Deck Covering & Carpet Shed

Coast Guard Drawing 420-WAGB-635-001, Rev C, Insulation Layouts & Dets

Coast Guard Drawing 420-WAGB-635-001, Rev E, Insulation Layouts & Dets

Coast Guard Drawing 420-WAGB-801-001, Rev B, Booklet of General Drawings

Coast Guard Drawing 420-WAGB-801-001, Rev K, Booklet of General Drawings

Coast Guard Drawing 420-WAGB-801-005, Rev B, Piping Material Schedule

Coast Guard Drawing 420-WAGB-801-009, Rev C. Tank Sounding Tables

Coast Guard Drawing 420-WAGB-801-012, Rev E, List of Control Valves

Coast Guard Drawing FL-1204-3, Rev A, Fleet Welded Padeyes and Links

Coast Guard Drawing FL-1702-11, Sheave Inspection

Coast Guard Drawing FL-588-002, Rev A, Talon Grid Supporting Skirt and Stanchion Bolt Details

Coast Guard Drawing FL-588-003, Rev -, Talon Grid Supporting Skirt & Cover Fabrication & Instl

NAVAIR Drawing 626883, Rev D, Visual Landing Aids Installation and Clearance Requirements, WAGB-420 Class Ships

NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight

& Airtight Quick Acting or Individually Dogged Personnel Doors

NAVSEA Drawing 803-1385828, Rev P, Nozzles AFFF and Washdown Systems

NAVSEA Drawing 803-1385866, Rev E, Penetration, Bulkhead and Deck

NAVSEA Drawing 803-5184182, Rev B, Insulation, Passive Fire Protection- Installation Details

NAVSEA Drawing 803-6397268, Rev B, Doors Watertight, Quick Acting Arrangement

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation for Compartments Installation

Details

NAVSEA Drawing S9AAO-AB-GOS-101, General Specification for the Overhaul of Surface Ships

COAST GUARD PUBLICATIONS

American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of

Welds

American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of Welds

Coast Guard Commandant Instruction (COMDTINST) 10360.3 (series), Coatings and Color Manual

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors

Manual x (Draft-0)

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (Series), Coatings and Color Manual

Coast Guard Technical Publication (Tech Pub) 5183, 1 Nov 03, S6435-S7-MMC-010 - Valves, Thermostatic Control & Temperature

Coast Guard Technical Publication (TP) 2718, SWBS 555, Jun 2006, Fire Extinguishing Systems (270

WMEC A-Class)

Coast Guard Technical Publication (TP) 2818, Manufacturer's Instruction Book-SWBS Group(s) 256-262

Coast Guard Technical Publication (TP) 3368, SWBS 588, 2023, Technical Documentation Helicopter

Land Grid Type 18-22-01

Coast Guard Technical Publication (TP) 5061, 01-NOV-03, S9261-BE-MMC-010 - Purification System, Fuel Oil

Coast Guard Technical Publication (TP) 5068, 01-NOV-03, S9264-A9-MMC-010 - Purification System, Lube Oil

Coast Guard Technical Publication (TP) 5128, 06-AUG-07, SN572-AP-MMC-010 – Tank Level

Indicating (TLI) System

Coast Guard Technical Publication (TP) 5150, 2003, S6161-U4-FSE-010 Grease Interceptor Hood with

MGPC-4000-S-2 Control Cabinet.

Coast Guard Technical Publication (TP) 5150, Nov 2003, S6161-U4-FSE-010 Grease Interceptor Hood with MGPC-4000-S-2 Control Cabinet.

Coast Guard Technical Publication (TP) 5155, 01 Nov 2003, S9512-PQ-MMC-010 – Dampers, Multi-

Louver

Coast Guard Technical Publication (TP) 5162A, 2023, S9517-AY-MMC-010 - Boiler, Oil Fired

Auxiliary

Coast Guard Technical Publication (TP) 5171, 2023; S9531-CA-MMC-010 – Distilling Plant – Model 2-

TCFE-6-SC

Coast Guard Technical Publication (TP) 5200, S6220-B4-MMC-010, Compressor, High Pressure

Breathing Air, Model K15-E3

Coast Guard Technical Publication (TP) 5207, S9555-DM-MMC-010, Fire Extinguishing System, High

Pressure Carbon Dioxide

Coast Guard Technical Publication (TP) 5214, 01-NOV-03, SG700-AM-MMC-010 - Hydraulic Power

Unit (HPU), Aft General Service

Coast Guard Technical Publication (TP) 5221, 01-NOV-03, SG700-AP-MMC-010 - A-Frames

Coast Guard Technical Publication (TP) 5223, SWBS 572, 2005, Dumbwaiter (200 Lb Capacity) – Model

20700

Coast Guard Technical Publication (TP) 5243, 2022, SG811-B4-MMC-010 – Crane, Electro-Hydraulic

Telescoping Boom – Model TB60-65

Coast Guard Technical Publication (TP) 5243, Nov 2013, SG811-B4-MMC-010 – Crane, Electro-

Hydraulic Telescoping Boom – Model TB60-65

Coast Guard Technical Publication (TP) 5244 July 2004, SG811-B5-MMC-010 – Single Articulating

Boom Crane – Model K40-55

Coast Guard Technical Publication (TP) 5244, 2022, SG811-B5-MMC-010 – Single Articulating Boom

Crane – Model K40-55 (aft starboard)

Coast Guard Technical Publication (TP) 5245, 2022, SG811-C5-MMC-010 - Crane, Primary Telescoping

Boom Pedestal Type – Model 100-55 (port 04)

Coast Guard Technical Publication (TP) 5245, 2022, SG811-C5-MMC-010 - Crane, Primary Telescoping

Boom Pedestal Type – Model 100-55 xi (Draft-0)

Coast Guard Technical Publication (TP) 5246, 2022, SG811-C6-MMC-010 - Crane, Knuckleboom (aft port)

Coast Guard Technical Publication (TP) 5246, 2022, SG811-C6-MMC-010 - Crane, Knuckleboom

Coast Guard Technical Publication (TP) 5249, SWBS 589, 2003, SG825-A3-MMC-010 - 1000 Lb

Capacity Stores Hoist

Coast Guard Technical Publication (TP) 5250, 01-NOV-03, SG825-Ay-MMC-010 - Hoist, Science

(6000-Lb Capacity)

Coast Guard Technical Publication (TP) 5250, SWBS 589, 2005, SG825-AY-MMC-010 - 6000 Lb

Capacity Science Hoist

Coast Guard Technical Publication (TP) 5251, SWBS 589, SG825-AZ-MMC-010 - 600 Lb Capacity

Trash Hoist

Coast Guard Technical Publication (TP) 5262, SWBS 591, May 2020, Science Winch, Mechanical

System & Wire Handling (Volume 1)

Coast Guard Technical Publication (TP) 5263, SWBS 591, Nov 2003, Science Winch, Mechanical

System & Wire Handling (Volume 2)

Coast Guard Technical Publication (TP) 5264, SWBS 591, Nov 2003, Science Winch, Mechanical

System & Wire Handling (Volume 3)

Coast Guard Technical Publication (TP) 5336, 06-NOV-07, The Cranesmart "LMI" System

Coast Guard Technical Publication (TP) 5336, 2007, The Cranesmart "Lmi" System

Coast Guard Technical Publication (TP) 5359, 2023, Boiler Water Management System – Chem Aqua

Water Treatment Program

Coast Guard Technical Publication (TP) 5502, 2020, Fire Suppression System - Model WHDR

Coast Guard Technical Publication (TP) S9555-CH-MMA-010, 2008, AFFF Firefighting Hose Reels –

Models NL20MB, NL20M-200B

Coast Guard Technical Publication 5232 S9538-AR-MMC-010 – Davit Winch & HPU (Rescue Boat)

Volume 1

Coast Guard Technical Standard (TS) 591, Rev -, Oceanographic Research Equipment

Fire Prevention and Response

Maintenance Procedure Card D-Q-8433 Helicopter Tie Down Fittings, Inspect

MIL-DTL-32585A, 2021, Insulation, Thermal and Acoustic, Fibrous Glass

MIL-PRF-1149E, 2019, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness

MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness

MIL-STD-1689A, Nov 1990, Fabrication, Welding, and Inspection of Ships Structure

NOTE

OTHER REFERENCES

Surface Forces Logistic Center Technical Standard (SFLC TS) 583-2, 2019, Shipboard Boat Hoisting

Systems

Surface Forces Logistic Center Technical Standard (SFLC TS) 589, 2020, Cranes

Surface Forces Logistics Center Standard Specification (SFLC Std Spec 0000), 2022, General

Requirements

Surface Forces Logistics Center Standard Specification (SFLC Std Spec 0740), 2022, Welding and Allied

Processes

Surface Forces Logistics Center Standard Specification (SFLC Std Spec 6310), 2022, Requirements for

Preservation of Ship Structures xii (Draft-0)

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General

Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General

Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2024, General

Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Jan 2022, General

Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Latest Version, General Requirements

Surface Forces Logistics Center Standard Specification 0000, (SFLC Std Spec 0000) 2022 Edition, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and

Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and

Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and

Allied Processes.

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740, (SFLC Std Spec 0740) 2022 Edition, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 3020 (SFLC Std Spec 3020), 2022, Overhaul AC

Electrical Motors

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard

Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3041, (SFLC Std Spec 3041) 2022 Edition, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, And Installation

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard

Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042, (SFLC Std Spec 3042) 2022 Edition, Shipboard Electrical Cable Removal, Relocation, Splice, Repair and Installation

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary

Machinery Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Requirements for Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary

Machinery Systems xiii (Draft-0)

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2024, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2020, Clean

Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2022, Clean

Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ships Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirement for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ships Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2024, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310, (SFLC Std Spec 6310) 2022 Edition, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install Interior

Deck Covering Systems

Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2022, Drydocking

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2022, Temporary

Services

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2022, Temporary

Hull Access

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Bare Metal Power Tool Cleaning

Tips and Techniques for Keeping WT Closures Shipshape, 2017, Juniper Industries, Inc.

OTHER REFERENCES

Amerex Inspection, Maintenance, and Recharge Service manual NO. 13259

American National Standards Institute (ANSI/ASA) S2.19, 2004, Mechanical Vibration - Balance Quality

Requirements of Rigid Rotors - Part 1: Determination of Permissible Residual Unbalance

American National Standards Institute (ANSI/EASA) AR100-2006, 2006, Recommended Practice for the

Repair of Rotating Electrical Apparatus

American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2019, Disinfection of Water-Storage Facilities

American National Standards Institute/NSF International (ANSI/NSF) 61, 2020, Drinking Water System

Components - Health Effects

American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, 2020, Personnel Qualification and Certification in Nondestructive Testing xiv (Draft-0)

American Society for Nondestructive Testing (ASNT), Standard No. ANSI/ASNT CP-189-2020, 2020, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel

American Society for Testing and Materials (ASTM) F1321, Standard Guide for Conducting a Stability

Test (Lightweight Survey and Inclining Experiment) To Determine the Light Ship Displacement and

Centers of Gravity of a Vessel, 1992 (R2004)

American Society of Mechanical Engineers (ASME) A17.2, Guide for the Inspection of Elevators, Escalators and Moving Walks

American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of

Welds

American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of Welds

American Welding Society (AWS) D1.1/D1.1M, 2020, Structural Welding Code – Steel

ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D5363, 2003, Standard Specification for Anaerobic Single Component

Adhesives

ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component

Adhesives (AN)

ASTM International (ASTM) F1836M, Reapproved 2007, Standard Specification for Stuffing Tubes, Nylon and Packing Assemblies (Metric)

ASTM International (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting

Corrosion

ASTM Internationals (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting

Corrosion

Code of Federal Regulations (CFR) Title 29, Part 1910, 2017, Occupational Safety and Health Standards

Code of Federal Regulations (CFR) Title 29, Part 1910, Jul 2017, Occupational Safety and Health

Standards

Code of Federal Regulations (CFR) Title 29, Part 1910, Subpart T, 2007, Commercial Diving Operations

Code of Federal Regulations (CFR) Title 29, Part 1910, Subpart T, 2023, Commercial Diving Operations

Code of Federal Regulations (CFR) Title 29, Part 1915, 2013, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, Jul 2013, Occupational Safety and Health

Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for

Shipyard Employment

Code of Federal Regulations (CFR) Title 40, 2013, Protection of the Environment

Code of Federal Regulations (CFR) Title 40, Jul 2013, Protection of the Environment

Federal Specification (Fed Spec) HH-P-151, Mar 1991, Packing; Rubber-Sheet, Cloth Insert

Federal Specification (Fed Spec) QQ-N-281, Oct 1985, Nickel-Copper-Aluminum Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, And Structural and Special Shaped Sections

Federal Specification (Fed Spec) QQ-N-281D (2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) QQ-N-281D(2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Federal Specification (Fed Spec) QQ-N-281D(2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections

Huber A-Frame Drawing HI-571-1001, Rev C xv (Draft-0)

MIL-A-21016F, 2021, Adhesive, Resilient Deck Covering

MIL-A-46106B, 2019, Adhesive-Sealants, Silicone, RTV, One-Component

MIL-DTL-1222, Dec 2000, Studs, Bolts, Screws and Nuts for Applications Where a High Degree of

Reliability Is Required; General Specification for

MIL-DTL-15024, General Specification for Plates, Tags, and Bands for Identification of Equipment

MIL-DTL-15090, Nov 1996, Enamel, Equipment, Light Gray, (Navy Formula No. 111)

MIL-DTL-15562G, 2021, Matting or Sheet, Floor Covering Insulating for High Voltage Requirements

MIL-DTL-24643, General Specification for Low Smoke Electric Cables and Cords for Shipboard Use

MIL-DTL-32585A, 2021, Insulation, Thermal and Acoustic, Fibrous Glass

MIL-PRF-1149E, 2019, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness

MIL-PRF-16173E w/Interim Amendment 2, 2017, Corrosion Prevention Compound, Solvent Cut Back, Cold Application

MIL-PRF-24176C, 2020, Cement, Epoxy, Metal Repair and Hull Smoothing

MIL-PRF-24613A, 2017, Deck Covering Materials, Interior, Cosmetic Polymeric

MIL-PRF-24667C w/Int. Amendment 1, 2018, Coating System, Non-Skid, for Roll, Spray, or Self-

Adhering Application

MIL-PRF-24667D, 2021, Coating System, Non-Skid, for Roll, Spray, or Self-Adhering Application

MIL-PRF-24712B, 2014, Coatings, Powder, Thermosetting

MIL-PRF-3135H, 2021, Deck Covering Underlay Materials

MIL-PRF-32584A, 2022, Deck Covering Materials, Monolithic

MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness

MIL-STD-1310 (series), Shipboard Bonding, Grounding, and Other Techniques for Electromagnetic

Compatibility, Electromagnetic Pulse (EPM) Mitigation and Safety

MIL-STD-1689A, 1990, Fabrication, Welding, and Inspection of Ships Structure

MIL-STD-1689A, Nov 1990, Fabrication, Welding, and Inspection of Ships Structure

MIL-STD-2003, Electric Plant Installation Standard Methods (Section 1: Cable)

MIL-STD-2003, Electric Plant Installation Standard Methods (Section 2: Equipment)

MIL-STD-2003, Electric Plant Installation Standard Methods (Section 3: Penetrations)

MIL-STD-2003, Electric Plant Installation Standard Methods (Section 4: Cableways)

National Fire Protection Association standard NFPA-10 (Portable Fire Extinguishers)

Naval Air Warfare Center (NAVAIR) NAEC ENG 7576, 2009, Shipboard Aviation Facilities Resume

Naval Sea Systems Command (NAVSEA) 0640-LP-119-0175, 2019, NAVSEA OP 4 Rev 12, Ammunition and Explosives Safety Afloat

Naval Ship's Technical Manual (NSTM) Chapter 556, Rev 9, Hydraulic Equipment Power Transmission and Control

Naval Ship's Technical Manual (NSTM) Chapter 613, Wire and Fiber Rope Rigging

Naval Ships Technical Manual S9086-GY-STM-010, 2021, Chapter 221

NAVSEA 4730/3, 2004, Driver Hull Inspection Data

NAVSEA S0600-AA-PRO-170, Rev 2 Change A, 2014, Underwater Ship Husbandry Manual, Chapter

17 Inspections

NAVSEA S0600-AA-PRO-170, Rev 2 Change A, Apr 2014, Underwater Ship Husbandry Manual, Chapter 17 Inspections

NAVSEA S9583-AR-MMC-010, VOL 1, Davit, Winch & HPU, Rescue Boat (RHIB) xvi (Draft-0)

NAVSEA SG700-AM-MMC-010/34712, Power Unit, Hydraulic, Aft General Service

NAVSEA SG700-AM-MMC-010/34712, POWER UNIT, HYDRAULIC, AFT GENERAL SERVICE

NAVSEA SG700-AP-MMC-010, Rev -; Preliminary Operation & Maintenance Manual for WAGB-20

Polar Icebreaker a-Frames

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for

Fabrication, Welding, and Inspection of Submarine Structure

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183A, 2019, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183B, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

Society of Automotive Engineers (SAE) Aerospace Material Specification AMS-S-8802, 2019, Sealing

Compound, Temperature-Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High-Adhesion

SSPC VIS 2, 2008, Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2016, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Bare Metal Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.2 (SSPC-SP 2), 2004, Hand Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2018, Power Tool Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet Abrasive Blast

Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 5 (WAB)/NACE WAB-1, 2015, White Metal Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 5/NACE No. 1, 2007, White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP

10/NACE No.2, 2004, Near-White Blast Cleaning

Underwater Ship Husbandry Manuals

USCG, HWSL Guidance/Fall Protection Plan, Working Aloft Aboard Cutter xvii (Draft-0)

CONSOLIDATED LIST OF GOVERNMENT-FURNISHED PROPERTY

The following is a list of property, which the Government will furnish. This list supersedes any other material obligations indicated or implied by referenced drawings.

WORK

ITEM

MTI ITEM DESCRIPTION NSN/PN QTY ESTIMATED

COST

($/UNIT)

2 N Talon Grid Fixation

Bolts, (Screw, Cap

Socket Head, 5/8―-

11 UNC-2A, Length

80 mm (3.15―) -

Special)

NSN: 5305-01-393-1827 (CG

Dwg FL-588-003, PC# 17)

24 ea. ~32.00

2 N Talon Grid Assembly

Bolts, (Screw, Cap

Socket Head, M12 x

1.75 Pitch, Overall

Length 42 mm

(1.6535―), Thread

Length 30 mm

(1.1811―), with Hex

Head Drive 3/8―)

NSN: 5305-01-584-6095 (CG

Dwg FL-588-003, PC# 18)

12 ea. ~42.00

2 N Talon Grid Stanchion

Bolts and Lock Nuts, (Stanchion Bolts, SS316, from Round

Bar Dia 7/8―, Locknuts, Hex, M14 x

2.0-6H, SS316, with

Nylon Insert)

NSN: 5340-01-481-3786 (CG

Dwg FL-588-003, PC# 19 &

20)

60 ea. ~40.00

2 N Jacking Bolts, (Bolt, Hex, 5/8"-11 UNC, Length 4―, Steel)

Commercial, N/A (CG Dwg

FL-588-003, PC# 21)

6 ea. ~20.00

28 N Raised Watertight

Hatch, Complete

Overhaul Kits

NAVSEA Dwg NNN-

NNNNNNN Rev. N, Assy NN-

X, (Juniper XXNNN-XX-NN)

1 ea. N,NNN.NN (incl.

S&H)

28 N Closure Gasket, ~24 ft/WTCs (Gasket GRV

0.5x1.2 30D R-SIL, AA-59588 (ZZ-R-765)

Gr 30 Cl 3B, 160 ft

Roll)

NAVSEA Dwg. -, Juniper

JE4503-ZZ

1 ea. ~1,000.00 (incl.

S&H)

29 N 60 in x 96 in x 8 in

Watertight Double

Door, Complete

Overhaul Kits

NAVSEA Dwg NNN-

NNNNNNN Rev. N, Assy NN-

X, (Juniper XXNNN-XX-NN)

3 ea. N,NNN.NN (incl.

S&H)

29 N Closure Gasket, ~42 ft/WTCs (Gasket GRV

0.5x1.2 30D R-SIL, AA-59588 (ZZ-R-765)

NAVSEA Dwg. -, Juniper

JE4503-ZZ

1 ea. ~1,000.00 (incl.

S&H) xviii (Draft-0)

Gr 30 Cl 3B, 160 ft

Roll)

30 N 54 in x 88 in x 8 in

QAWT within

Watertight Door, RH, Complete Overhaul

Kitsr

NAVSEA Dwg NNN-

NNNNNNN Rev. N, Assy NN-

X, (Juniper XXNNN-XX-NN)

8 ea. N,NNN.NN (incl.

S&H)

30 N 54 in x 88 in x 8 in

QAWT within

Watertight Door, LH, Complete Overhaul

Kits

NAVSEA Dwg NNN-

NNNNNNN Rev. N, Assy NN-

X, (Juniper XXNNN-XX-NN)

1 ea. N,NNN.NN (incl.

S&H)

30 N Closure Gasket, ~40 ft/WTCs (Gasket GRV

0.5x1.2 30D R-SIL, AA-59588 (ZZ-R-765)

Gr 30 Cl 3B, 160 ft

Roll)

NAVSEA Dwg. -, Juniper

JE4503-ZZ

3 ea. ~1,000.00 (incl.

S&H)

30 N Fixed Light 9―

Gaskets (Gasket Sht

.12x9.375OD B-Rub, 803-6397269-185

(Dia), 2 pc/set)

NAVSEA Dwg. 803-6397268-

185 (Dia), Juniper JE269-185-

9 ea. 100.00

41 N 4” Butterfly Valve, Bronze Mil-V-24624 w/ gear tbd 4 EA $9,604

41 N 2-1/2” Butterfly Valve, Bronze w/ gear

6 On Hand Base Seattle

Warehouse

1 EA $6,269

12 N Cab Control Panel for

TB60-65 I thought that we have this panel, but

I am not sure. I also guessed on the price.

PN: 44351 1 3,000.00

46 N Receptacle, Watertight, 10-Pole, 11-Wire

(Female)

SKWR11G 10 ea

46 N Receptacle, Watertight, 8-Pole, 9-Wire

(Female)

SKWR9G 10 ea

46 N Conduit Box, Double

Gang, Aluminum

3712A 10 ea

46 N Connector, Watertight, 10-Pole, 11-Wire

(Female)

SKWC11G 9 ea

46 N Connector, Watertight, 8-Pole, 9-Wire

(Female)

SKWC9G 9 ea

46 N Plug, Watertight, 10-

Pole, 11-Wire (Male)

SKWP11G 9 ea

46 N Plug, Watertight, 8- SKWP9G 9 ea xix (Draft-0)

Pole, 9-Wire (Male)

46 N Plug, Watertight, 8-

Pole, 9-Wire (Male)

SKWM11G 10 ea

46 N Plug, Motor, 8-Pole, 9-

Wire (Male)

SKWM9G 10 ea

46 N Power Supply, 24VDC, DIN Rail

Mounted

DR-30-24 10 ea

46 N Ethernet to Fiber

Adapter, Din Rail

Mounted

EIR-M-SC 10 ea

46 N Din Rail, Steel, One

Meter Length

ERS35 2 ea

46 N Junction Box, Steel, 14 x 12 x 8

A14128CH 20 ea

46 N Mounting Panel, Steel A14P12G 20 ea

46 N Loudspeaker, Permanent Magnet

LS-306/SIC 10 ea

46 N Detector, Fire/Smoke HFP-11 10 ea

46 N Mounting Base, Detector, Fire/Smoke

DB-11E 10 ea

46 N Terminal Board 37TB-12 30 ea

46 N Marker Strip, Terminal

Board

MS-12-140 30 ea

46 N Switch, Rocker, DPDT JWMW22RCA 10 ea

46 N Switch, Rocker, DPST JWMW21RA1A 10 ea

46 N Indicator, Panel

Mount, Neon, Green, 120VAC

10 ea

46 N Connector, Receptacle, RJ-11

RJ11F21B 10 ea

46 N Gasket, Connector, RJ-

JE14 10 ea

46 N Connector, Receptacle, Ethernet

RJF5442200 10 ea

46 N Gasket, Connector, Ethernet

RJF54402JE 10 ea

46 N Resistor, 8 ohm, 50W RH0508R000FE02 10 ea

46 N Adapter, 45 degrees, Aluminum

3678A 20 ea

45 N DMU Cabinet “ 1

Signal

12934-6 5 $12,000

45 N DMU Cabinet “ 6

Signal

12934-4 3 $12,000

45 N DMU Cabinet “ 3

Signal

12934-2 2 $12,000

45 N Gasket, 3, Neoprene 10401 26 $27.42

45 N Mounting Bar w/ Slot, 304SS

14968 40 $125.54 xx (Draft-0)

*Government-loaned property, which shall be returned to the vessel upon completion of the availability.

**New or refurbished equipment that the Government may provide for installation in place of existing equipment.

***Government-furnished property, which is to be supplied by either the vessel or the C4IT ServiceCenter xxi (Draft-0)

CONSOLIDATED LIST OF CRITICAL INSPECTION ITEMS

The following is a list of work items, which contain Critical Inspection reports, which the Contractor must complete within the first 25% of the availability contract period (see SFLC Std Spec 0000, paragraph 3.2.6.5

(Inspection report particulars)):

Work

Item Title

2 Talon Grid (Type 18-22-01), Inspect and Test

3 Boiler, Annual Maintenance

4 Aft Crane (Port), Annual Inspect and Repair

10 Internal Hoists, Annual Inspect and Lubricate

23 Geislinger Coupling, 20,000-hour Service

5 Bow Crane, Annual Inspect and Test

7 Aft Crane (Starboard), Annual Inspect and Repair

9 Port & Starboard Miranda Davit, Annual Inspect and Repair

6 A-Frames, Annual Inspection

8 04 Deck Crane (Port) TB 100-55, Annual Inspect and Test

24 Oceanographic Winch, Gearbox Oil and Lube

15 Tanks, Ballast, Preserve, 100 Percent

27 Screens, Preserve (Powder Coating)

28 Raised Watertight Hatch 6x6, Overhaul

29 Watertight Double Door 60x96, Overhaul

30 QAWT within Watertight Door 54x88, Overhaul

35 Deck Covering Magnesite, Replace

36 Deck Covering (Slip-Resistant) Flight Deck, Renew

37 Deck Covering Polymeric, Renew

39 Bulkheads, Inspect and Preserve

48 Tenting, Provide xxii (Draft-0)

12 Crane Cab, Overhaul

25 Trawl / Core Winch, Inspect and Test

24 Oceanographic Winch, Inspect and Test xxiii (Draft-0)

PRINCIPAL CHARACTERISTICS

420' WAGB (CGC HEALY)

PHYSICAL

Length overall 420'

Length between perpendiculars 396' 6"

Beam, extreme 82' 0"

Depth amidships to main deck 42' 0"

Draft to bottom of keel @ full load 29' 3"

Full load displacement 16,423 long tons

Effective keel length 230' 0"

Mast height above DWL @ 28' draft 158' 3/8"

HULL

Frame spacing 30"

Material

Hull ASTM A131, GR EH 36, or ABS EH 36

Flight deck ASTM A131, GR EH 36, or ABS EH 36

Superstructure ASTM A131, GR EH 36, or ABS EH 36

MACHINERY

Propulsion 4 Sultzer 12Z a V 40S

2 AC Synchronous, 11.2MW Drive Motors

Auxilary generator 1 EMD 16-645F7B, 2200 KW, 450V AC, 3 phase

Rudder 2

Anchor & chain Two 13,200 lbs Navy Stockless, 150 fathoms chain Port, 165 fathoms chain

Starboard

TANKS

Diesel oil or JP-5 (@ 95%) 1,187,117 gal.

JP-5 (Helo) (@ 95%) 56,434 gal.

9250 lube oil (@ 95%) 24,794 gal.

Fresh water (@ 95%) 34,553 gal.

Hydraulic oil (@95%) 8,571 gal.

Ballast water (@95%) 899,776 gal.

1 (Draft-0)

00000_0623_FLT

REC_00000_FLT_Commercial Project @ CG Facility (0121)

General Requirements

1. SCOPE

1.1 Intent. This standard specification invokes general requirements for conducting vessel repairs performed by commercial contractors at a Coast Guard facility for Coast Guard vessels.

1.2 Term interchangeability. The terms 'Contractor', 'CG Yard', 'NAVSTA EVERETT', 'shipyard', 'Base', and

'Coast Guard Industrial' are used interchangeably in this specification. Where the primary service provider is

Coast Guard personnel, references to contractor and other noted descriptors within this specification or within drawings, publications, SFLC Standard Specifications or other commercial and military references are deemed the same as prime service provider.

2. REFERENCES

COAST GUARD DRAWINGS

None

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (series), Coatings and Color Manual

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Latest Version, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, Fire Prevention and Response

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures

OTHER REFERENCES

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for

Shipyard Employment

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for

Fabrication, Welding, and Inspection of Submarine Structure

2 (Draft-0)

3. REQUIREMENTS

3.1 General. The Contractor must conform to all requirements specified in SFLC Std Spec 0000 and in this item, as applicable, during the performance of this availability. The requirements in this WI applies to all work under the scope of this contract, whether explicitly stated in all following work items or not, and to all other work subsequently authorized by changes, modifications, or extensions to the contract.

3.1.1 The Contractor must conform to all requirements specified in SFLC Std Spec 5550 and in the Fire

Protection and Response work item, as applicable, during the performance of this availability.

3.1.1.1 Fire Safety Plan submission. The Contractor must submit a copy of the CFR 1915, Subpart P, Fire Safety

Plan with the Contractor’s bid when work will be conducted in a Contractor–owned facility. Include any MOA(s) with local firefighting facilities.

3.1.1.2 Fire Plan submission. The Contractor must submit a copy of the developed availability specific fire plan, as requested in the Fire Protection and Response work item, seven (7) days before the Arrival Conference.

NOTE

NAVSEA drawings listed will be available FOR INSPECTION ONLY from the Coast

Guard Port Engineer post-award. SFLC will not redistribute NAVSEA documents.

Contractors can apply to NAVSEA headquarters directly for copies.

3.2 Contractor-provided fire watch personnel. The Contractor must provide fire watch personnel and equipment.

3.3 Preservation requirements. The Contractor must accomplish all preservation tasks, including touch-ups, in accordance with SFLC Std Spec 6310.

3.3.1 Brand name approval. Ensure that all contractor-furnished coatings are in accordance with SFLC Std Spec

6310, Appendix C (Authorized Coatings for Use on Cutters and Boats).

3.3.2 Coating colors and system color schemes. The Contractor must obtain a written KO authorization to deviate from any coatings required in SFLC Std Spec 6310 Appendix C before work.

3.3.3 In-process quality control measures. The Contractor must abide by all the safety, preservation, and quality control requirements specified in SFLC Std Spec 0000, paragraph 3.2.4.2 (In-process QC measures for “critical-coated surfaces”).

3.3.3.1 Quality control requirements. The Contractor must abide by the following when performing preservation related inspections.