Amendment 001-Specification Rev 2.pdf

USCGC HEALY (WAGB 20)

SPECIFICATION FOR DOCKSIDE REPAIRS

FY2025

Developed By: Sarah L Passilla

(Rev-2, 08 Oct. 2024)

USCGC HEALY (WAGB-420) DOCKSIDE AVAILABILITY FY2025

ii (Draft-0)

TABLE OF CONTENTS

Revisions Record .......................................................................................................................................... iv Consolidated List of References .................................................................................................................... v Consolidated List of Government-furnished Property ............................................................................. xvii Consolidated List of Critical Inspection Items ........................................................................................... xxi Principal Characteristics .......................................................................................................................... xxiii General Requirements WORK ITEM 1: U/W Body, Diver Inspect WORK ITEM 2: Talon Grid (Type 18-22-01), Inspect and Test WORK ITEM 3: Boiler, Annual Maintenance WORK ITEM 4: Aft Crane (Port), Annual Inspect and Repair WORK ITEM 5: Bow Crane, Annual Inspect and Test WORK ITEM 6: A-Frames, Biennial Inspection WORK ITEM 7: Aft Crane (Starboard), Annual Inspect and Repair WORK ITEM 8: 04 Deck Cranes (Port & Starboard) TB 100-55, Annual Inspect and Test WORK ITEM 9: Port & Starboard Miranda Davit, Annual Inspect and Repair WORK ITEM 10: Internal Hoists, Annual Inspect and Lubricate WORK ITEM 11: Cargo Handling Elevator, Dynamic & Modified Weight Test WORK ITEM 12: Crane Cabs, Overhaul WORK ITEM 13: Tanks (Aviation Fuel Stowage/Service and Overflow), Clean and Inspect WORK ITEM 14: Tanks, Potable Water, Clean and Inspect WORK ITEM 15: Tanks, Ballast, Preserve, 100 Percent WORK ITEM 16: Contaminated Freshwater Tank, Repairs WORK ITEM 17: Cofferdams, Preserve WORK ITEM 18: Fuel Oil Purifier (FOP) Overhaul WORK ITEM 19: Lube Oil Purifier (LOP) Overhaul WORK ITEM 20: Science Seawater System Ice Grinder, Installation WORK ITEM 21: Cofferdam, Install WORK ITEM 22: Evaporators, Overhaul WORK ITEM 23: Geislinger Coupling, 20,000-hour Service WORK ITEM 24: Oceanographic Winch, Inspect and Test WORK ITEM 25: Trawl / Core Winch, Inspect and Test WORK ITEM 26: Damage Control and Firefighting Systems, PMS WORK ITEM 27: Screens, Preserve (Powder Coating) WORK ITEM 28: Raised Watertight Hatch 6’x6’, (Walz & Krenzer D-WK-805-11), Inspect and

Maintain WORK ITEM 29: Watertight Double Door 60x96, Inspect and Overhaul WORK ITEM 30: Watertight Door 54x88, Inspect and Overhaul WORK ITEM 31: Leslie Pressure Regulating Valves, Overhaul WORK ITEM 32: Ventilation Louver Dampers, Service WORK ITEM 33: Pad Eyes, NDT Inspection WORK ITEM 34: Science Sheave Instrument, Renewal WORK ITEM 35: Deck Covering Magnesite, Renew WORK ITEM 36: Deck Covering, Flight Deck, Renew WORK ITEM 37: Deck Covering, Polymeric, Renew WORK ITEM 38: Deck Covering, Preserve (MIL SPEC Steel Coating) WORK ITEM 39: Bulkheads, Inspect and Preserve WORK ITEM 40: Galley Ventilation Ducting, Clean and Inspect WORK ITEM 41: Fire Main Valves, Renew iii (Draft-0)

WORK ITEM 42: Steam Coil Pre-Heaters, Inspect and Test WORK ITEM 43: Steam Coil Pre-Heaters, Renew WORK ITEM 44: Flex Hose Assemblies, Renew WORK ITEM 45: Tank Level Indicator Monitor, Replace WORK ITEM 46: Roller Curtain Door Assemblies, Service and Inspect WORK ITEM 47: Stability Test WORK ITEM 48: Tenting, Provide WORK ITEM 49: Temporary Services, Provide - Cutter iv (Draft-0)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK

ITEM#

CHANGES MADE

2OCT2024

2 27, 38 Updated GFE table, Work Item revisions

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

v (Draft-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 420-WAGB-508-002, Rev-D, Piping & Machinery Insulation Schedule L/M Coast Guard Drawing 420 WAGB 085-002, Rev E, Tank Capacity Curves Coast Guard Drawing 420 WAGB 085-002, Rev F, Tank Capacity Curves Coast Guard Drawing 420 WAGB 101-016, Rev B, Construction Dwg Unit 143 & 144 Coast Guard Drawing 420 WAGB 101-017, Rev C, Construction Dwg Unit 145 Coast Guard Drawing 420 WAGB 101-048, Rev D, Construction DWG Units 603-604 Coast Guard Drawing 420 WAGB 101-068, Rev C, Construction Dwg Unit 432 & 433 Coast Guard Drawing 420 WAGB 167-002, Rev. H, Manhole List Coast Guard Drawing 420 WAGB 259-005, Rev C, Machinery Plant Exhaust Gas Piping A & D Coast Guard Drawing 420 WAGB 510-1, Rev E, HVAC Diagram Main Deck & Below Coast Guard Drawing 420 WAGB 510-2, Rev H, HVAC Diagram 01 Lvl & Above Coast Guard Drawing 420 WAGB 510-7, Rev D, HVAC Multi Louver Damper List Coast Guard Drawing 420 WAGB 517-001, Rev A, Reserve Feed Tank Coast Guard Drawing 420-WAGB-524_1, Rev N, Diagram Auxiliary Seawater System Coast Guard Drawing 420-WAGB_524_3, Rev -, Science Seawater Modifications Coast Guard Drawing 420 WAGB 573-001, Rev B, Crane Pedestals Arr & Dets Coast Guard Drawing 420 WAGB 573-002, Rev D, Boom Rests Coast Guard Drawing 420 WAGB 573-003, Rev A, Science Hoist Coast Guard Drawing 420 WAGB 573-1, Rev B, Crane Pedestals Arr & Dets Coast Guard Drawing 420 WAGB 573-2, Rev D, Boom Rests Coast Guard Drawing 420 WAGB 573-511, Rev F, General Arrangement KB 15-45 Coast Guard Drawing 420 WAGB 573-522, Rev A, General Arrangement TB 100-55 Coast Guard Drawing 420 WAGB 573-545, Rev G, Aft. "A" Frame Base Weldment Coast Guard Drawing 420 WAGB 573-546, Rev D, Stbd "A" Frame Base Weldment Coast Guard Drawing 420 WAGB 573-547, Rev -, Hydraulic Cylinder Aft a-Frame Coast Guard Drawing 420 WAGB 573-548, Rev -, Hydraulic Cylinder Starboard a-Frame Coast Guard Drawing 420 WAGB 573-558, Rev C, Aft. "A" Frame Stop Tube Weldment Coast Guard Drawing 420 WAGB 573-559, Rev B, Side "A" Frame Stop Tube Weldment Coast Guard Drawing 420 WAGB 589-005, Rev B, Science Hoist Arrangement vi (Draft-0)

Coast Guard Drawing 420 WAGB 589-506, Rev C, General Arrangement Trash Hoist Coast Guard Drawing 420 WAGB 589-507, Rev E, General Arrangement 600Stores Hoist Coast Guard Drawing 420 WAGB 591-501, Rev E, Winch Assembly Oceanographic Coast Guard Drawing 420 WAGB 591-501, Rev E, Winch Assembly Oceanographic Coast Guard Drawing 420 WAGB 591-502, Rev E, Winch Assembly Traw/Core Coast Guard Drawing 420 WAGB 630-001, Rev D, Zinc Anodes Coast Guard Drawing 420 WAGB 631-001, Rev D, Paint Schedule & Corrosion Control Coast Guard Drawing 420 WAGB 633-1, Rev D, Zinc Anodes Coast Guard Drawing 420 WAGB 671-002, Rev D, CO2 Room Coast Guard Drawing 420 WAGB 801-001, Rev B, Booklet of Drawings Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of Drawings Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420-WAGB 573-3, Rev A, Science Hoist - FR 133 Stbd Coast Guard Drawing 420-WAGB 591-505, Rev B, Instrumentation Sheave Installation T/C Coast Guard Drawing 420-WAGB 591-507, Rev -, Instrumented Sheave Installation O/W Coast Guard Drawing 420-WAGB 603-1, Rev E, Hull Markings & Draft Marks Coast Guard Drawing 420-WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420-WAGB 801-1, Rev -, Booklet of General Drawings Coast Guard Drawing 420-WAGB 801-1, Rev K, Booklet of General Drawings Coast Guard Drawing 420-WAGB 801-10, Rev B, Curves of Form Coast Guard Drawing 420-WAGB 839-1, Rev A, Lines Plan Coast Guard Drawing 420-WAGB 85-2, Rev F, Tank Capacity Curves Coast Guard Drawing 420-WAGB 97-3, Rev -, Stability Test Report (Supersedes 420 WAGB 097 002) Coast Guard Drawing 420-WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420-WAGB 801-1, Rev K; Booklet of General Drawings Coast Guard Drawing 420-WAGB-085-001, Rev G, Docking Plan Coast Guard Drawing 420-WAGB-100-001, Rev B, Non Destructive Test Requirements Coast Guard Drawing 420-WAGB-101-031, Rev D, Construction Drawings for Unit 402 Coast Guard Drawing 420-WAGB-101-037, Rev C, Construction Drawings for Units 446 & 447 Coast Guard Drawing 420-WAGB-101-038, Rev B, Construction Drawings for Units 448 & 449 Coast Guard Drawing 420-WAGB-101-043, Rev C, Construction Drawing Units 412 & 413 Coast Guard Drawing 420-WAGB-101-044, Rev C, Construction Drawing Units 415 & 000 Coast Guard Drawing 420-WAGB-101-055, Rev E, Construction Drawing Units 425-435 Coast Guard Drawing 420-WAGB-101-064, Rev D, Shell Expansion Coast Guard Drawing 420-WAGB-101-065, Rev C, Construction Dwg Unit 111 & 112 Coast Guard Drawing 420-WAGB-101-069, Rev B, Construction Drawing Units 458 & 459 Coast Guard Drawing 420-WAGB-101-075, Rev C, Construction Drawing Unit 470 Coast Guard Drawing 420-WAGB-161-001, Rev A, Forefoot Casting Coast Guard Drawing 420-WAGB-161-002, Rev D, Shaft Bossing Casting Coast Guard Drawing 420-WAGB-161-003, Rev B, Rudder Horn vii (Draft-0)

Coast Guard Drawing 420-WAGB-161-004, Rev -, Forefoot Transition Castings Coast Guard Drawing 420-WAGB-161-010, Rev -, Stern Tube Casting Coast Guard Drawing 420-WAGB-163-001, Rev D, Sea Chest and Vent Modifications Coast Guard Drawing 420-WAGB-167-001, Rev F, Hatches & Scuttles Coast Guard Drawing 420-WAGB-167-005, Rev B, Cargo & Misc Hatches Arrg't & Installation Details Coast Guard Drawing 420-WAGB-167-007, Rev -, Structural Doors Coast Guard Drawing 420-WAGB-167-501, Rev A, Hydraulic Schematic Polar Icebreaker Cargo Hatch Coast Guard Drawing 420-WAGB-167-502, Rev -, Dogging Cylinder for Polar Icebreaker Cargo Hatch Coast Guard Drawing 420-WAGB-167-506, Rev -, Raise-Lower Cylinder 6'x6' Raised Hatch Coast Guard Drawing 420-WAGB-167-510, Rev C, 6'x6' Raised Cargo Hatch Arrangement Coast Guard Drawing 420-WAGB-167-511, Rev -, 6'x6' Raised Cargo Hatch Panel Assembly Coast Guard Drawing 420-WAGB-167-512, Rev -, 6'x6' Raised Cargo Hatch Frame Assembly Coast Guard Drawing 420-WAGB-167-513, Rev -, 6'x6' Raised Cargo Hatch Linkage Assembly &

Details Coast Guard Drawing 420-WAGB-167-514, Rev A, 6'x6' Raised Cargo Hatch Piping Diagram Coast Guard Drawing 420-WAGB-167-515, Rev -, Hatch Dog and Toggle Assemblies and Details Coast Guard Drawing 420-WAGB-167-526, Rev -, Cargo Hatch Hinge Assembly Details Coast Guard Drawing 420-WAGB-167-527, Rev -, Cargo Hatch Locking Mech. Parts & Misc. Dets Coast Guard Drawing 420-WAGB-167-528, Rev A, Polar Icebreaker Structural Door List Coast Guard Drawing 420-WAGB-167-529, Rev -, 9 Diameter Fixed Light Coast Guard Drawing 420-WAGB-167-530, Rev -, Fixed Light Blackout Cover Assembly & Details Coast Guard Drawing 420-WAGB-167-537, Rev -, Operating Handle Assembly (Operable from Inside

Only) Coast Guard Drawing 420-WAGB-167-542, Rev -, Polar Icebreaker Mach'y Space Hatches Dog &

Toggle Ass'y & Det Coast Guard Drawing 420-WAGB-167-546, Rev -, Doors WTDBL 60X96 Coast Guard Drawing 420-WAGB-167-548, Rev -, Doors WTDWD 54X88 Coast Guard Drawing 420-WAGB-167-549, Rev -, Bumper-Hook Assembly & Details Coast Guard Drawing 420-WAGB-167-558, Rev -, Machinery Space Hatch Assembly Misc. Details Coast Guard Drawing 420-WAGB-167-563, Rev A, Dogging Cylinder Coast Guard Drawing 420-WAGB-202-001, Rev. F, Main Engine Propulsion Control and Monitoring

System Deck Plan Coast Guard Drawing 420-WAGB-202-014, Rev. B, Miscellaneous Tank Level Indicator and Alarm

System Circuit 1TK2 Isometric Wiring Diagram Coast Guard Drawing 420-WAGB-202-015, Rev. B, Miscellaneous Tank Level Indicator and Alarm

System Circuit 1TK2 Elementary Wiring Diagram Coast Guard Drawing 420-WAGB-233-520, Rev E, Diesel Alternator Set Coast Guard Drawing 420-WAGB-243-001, Rev A, Shafting Arrangements Coast Guard Drawing 420-WAGB-243-002, Rev A, Shaft Forgings Coast Guard Drawing 420-WAGB-243-003, Rev C, Shafting Details Coast Guard Drawing 420-WAGB-264-001, Rev. F, Lube Oil Fill Transfer & Purification System Coast Guard Drawing 420-WAGB-320-002, Power System One-Line Diagram Coast Guard Drawing 420-WAGB-320-002, Rev. AW, Power System One-Line Diagram viii (Draft-0)

Coast Guard Drawing 420-WAGB-320-016, Rev-D, HVAC Power System 01 Level Coast Guard Drawing 420-WAGB-320-017, Rev-D, HVAC Power System 02 Level Coast Guard Drawing 420-WAGB-320-018, Rev-E, HVAC Power System 03 Level Coast Guard Drawing 420-WAGB-320-019, Rev-C, HVAC Power System 04 Level & Above Coast Guard Drawing 420-WAGB-424-004, Rev L, Hull Mounted Transducers Installation Details Coast Guard Drawing 420-WAGB-424-006, Rev E, General Arrangement of Elec Equipment –

Transducer Well Coast Guard Drawing 420-WAGB-430-002, Science Van Connectivity Ripout/Installation Block Wiring

Diagram and Details Coast Guard Drawing 420-WAGB-430-003, Science Van Connectivity Installation Wiring Data (COED) Coast Guard Drawing 420-WAGB-432-010 Dial Telephone System (Circuit J) Elementary Wiring

Diagram Coast Guard Drawing 420-WAGB-433-002 Ships Public Announcing, Loudhailer, and Ships Alarm

Circuits 1MC, 5MC, and 6MC Elementary Wiring Diagram Coast Guard Drawing 420-WAGB-436-002 Ships Fire and Smoke Detection System (CIR. SM & F)

Elementary Wiring Diagram Coast Guard Drawing 420-WAGB-493-003, Science Data/CGSW Network System Block Wiring

Diagram Coast Guard Drawing 420-WAGB-505-001, Rev D, Piping General Notes and Installation Details Coast Guard Drawing 420-WAGB-506-001, Rev E, Diagram Vents, Sounds & Overflows Coast Guard Drawing 420-WAGB-508-001, Rev F, PP & Mchry Insulation Sched Coast Guard Drawing 420-WAGB-508-001, Rev F, PP & Mchry Insulation Schedule Coast Guard Drawing 420-WAGB-508-001, Rev-F, PP & Machinery Insulation Schedule Coast Guard Drawing 420-WAGB-508-002, Rev D, Piping & Machinery Insulation Schedule L/M Coast Guard Drawing 420-WAGB-508-002, Rev D, PP & Mchry Insulation Schedule L/M Coast Guard Drawing 420-WAGB-509-001, Rev-B, HVAC Insulation Schedule Coast Guard Drawing 420-WAGB-509-002, Rev-B, HVAC Insulation Schedule L/M Coast Guard Drawing 420-WAGB-510-002, Rev-H, HVAC 01 Level & Above Coast Guard Drawing 420-WAGB-511-001, Rev-E, HVAC Heater List Coast Guard Drawing 420-WAGB-512-021, Rev E, HVAC Arrangement Units 253, 254, 258 & 259 Coast Guard Drawing 420-WAGB-512-642, Rev-C, Coil Assy Model# 1D5-9-5610F-.5-H-B Coast Guard Drawing 420-WAGB-512-643, Rev-D, Coil Assy Model# 1D5-12-5608F-.7-H-B Coast Guard Drawing 420-WAGB-512-644, Rev-D, Coil Assy Model# 1D5-18-5608F-1.5-H-B Coast Guard Drawing 420-WAGB-512-647, Rev-C, Coil Assy Model# 1D11-18-5608F-2.1-H-B Coast Guard Drawing 420-WAGB-512-649, Rev-C, Coil Assy Model# 1D13-24-5609F-3.3-H-B Coast Guard Drawing 420-WAGB-512-650, Rev-C, Coil Assy Model# 1D14-18-5606F-2.6-H-B Coast Guard Drawing 420-WAGB-512-654, Rev-D, Coil Assy Model# 1D22-36-5606F-8.3-H-B Coast Guard Drawing 420-WAGB-512-655, Rev-E, Coil Assy Model# 1D16-12-5606F-2-H-B Coast Guard Drawing 420-WAGB-512-675, Rev-C, Coil Assy Model# 1D24-42-5604F-10.5-H-B Coast Guard Drawing 420-WAGB-512-676, Rev-D, Coil Assy Model# 1D16-42-5604F-7-H-B Coast Guard Drawing 420-WAGB-512-677, Rev-D, Coil Assy Model# 1D12-30-5604F-3.8-H-B Coast Guard Drawing 420-WAGB-521-001, Rev F, Diagram Firemain System Coast Guard Drawing 420-WAGB-530-001, Rev E, Diagram of Main Diesel Gen Cooling System ix (Draft-0)

Coast Guard Drawing 420-WAGB-535-001, Rev M, Diagram Steam, Feed & Condensate System Coast Guard Drawing 420-WAGB-535-001, Rev-M, Diagram Steam, Feed & Condensate System Coast Guard Drawing 420-WAGB-562-001, Rev E, Rudders Units 021 & 022 Coast Guard Drawing 420-WAGB-568-001, Rev C, Bow Thruster Installation Arrangement and Details Coast Guard Drawing 420-WAGB-593-004, Rev B. Diagram Water, Waste Oil, and Waste Water

Collecting Systems Coast Guard Drawing 420-WAGB-593-004, Rev. B, Diagram Oily Water Oil, and Waste Water

Collecting Systems Coast Guard Drawing 420-WAGB-612-003, Rev E, Helicopter Safety Nets Coast Guard Drawing 420-WAGB-621-002, Rev B, Typical Joiner Details Coast Guard Drawing 420-WAGB-621-004, Rev C, Joiner Arr - Mn Dk Coast Guard Drawing 420-WAGB-631-001, Rev D, Paint Schedule & Corrosion Control Coast Guard Drawing 420-WAGB-634-001, Rev C, Deck Covering & Carpet Shed Coast Guard Drawing 420-WAGB-635-001, Rev C, Insulation Layouts & Dets Coast Guard Drawing 420-WAGB-635-001, Rev E, Insulation Layouts & Dets Coast Guard Drawing 420-WAGB-801-001, Rev B, Booklet of General Drawings Coast Guard Drawing 420-WAGB-801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420-WAGB-801-005, Rev B, Piping Material Schedule Coast Guard Drawing 420-WAGB-801-009, Rev C. Tank Sounding Tables Coast Guard Drawing 420-WAGB-801-012, Rev E, List of Control Valves Coast Guard Drawing FL-1204-3, Rev A, Fleet Welded Padeyes and Links Coast Guard Drawing FL-1702-11, Sheave Inspection Coast Guard Drawing FL-588-002, Rev A, Talon Grid Supporting Skirt and Stanchion Bolt Details Coast Guard Drawing FL-588-003, Rev -, Talon Grid Supporting Skirt & Cover Fabrication & Instl NAVAIR Drawing 626883, Rev D, Visual Landing Aids Installation and Clearance Requirements, WAGB-420 Class Ships NAVSEA Drawing 167-7379842, Rev A, Procedure & Welding Sequence for Non-Ballistic, Watertight

& Airtight Quick Acting or Individually Dogged Personnel Doors NAVSEA Drawing 803-1385828, Rev P, Nozzles AFFF and Washdown Systems NAVSEA Drawing 803-1385866, Rev E, Penetration, Bulkhead and Deck NAVSEA Drawing 803-5184182, Rev B, Insulation, Passive Fire Protection- Installation Details NAVSEA Drawing 803-6397268, Rev B, Doors Watertight, Quick Acting Arrangement NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation for Compartments Installation

Details NAVSEA Drawing S9AAO-AB-GOS-101, General Specification for the Overhaul of Surface Ships

COAST GUARD PUBLICATIONS

American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of

Welds American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of Welds Coast Guard Commandant Instruction (COMDTINST) 10360.3 (series), Coatings and Color Manual Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors

Manual x (Draft-0)

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (Series), Coatings and Color Manual Coast Guard Technical Publication (Tech Pub) 5183, 1 Nov 03, S6435-S7-MMC-010 - Valves, Thermostatic Control & Temperature Coast Guard Technical Publication (TP) 2718, SWBS 555, Jun 2006, Fire Extinguishing Systems (270

WMEC A-Class) Coast Guard Technical Publication (TP) 2818, Manufacturer's Instruction Book-SWBS Group(s) 256-262 Coast Guard Technical Publication (TP) 3368, SWBS 588, 2023, Technical Documentation Helicopter

Land Grid Type 18-22-01 Coast Guard Technical Publication (TP) 5061, 01-NOV-03, S9261-BE-MMC-010 - Purification System, Fuel Oil Coast Guard Technical Publication (TP) 5068, 01-NOV-03, S9264-A9-MMC-010 - Purification System, Lube Oil Coast Guard Technical Publication (TP) 5128, 06-AUG-07, SN572-AP-MMC-010 – Tank Level

Indicating (TLI) System Coast Guard Technical Publication (TP) 5150, 2003, S6161-U4-FSE-010 Grease Interceptor Hood with

MGPC-4000-S-2 Control Cabinet.

Coast Guard Technical Publication (TP) 5150, Nov 2003, S6161-U4-FSE-010 Grease Interceptor Hood with MGPC-4000-S-2 Control Cabinet.

Coast Guard Technical Publication (TP) 5155, 01 Nov 2003, S9512-PQ-MMC-010 – Dampers, Multi-

Louver Coast Guard Technical Publication (TP) 5162A, 2023, S9517-AY-MMC-010 - Boiler, Oil Fired

Auxiliary Coast Guard Technical Publication (TP) 5171, 2023; S9531-CA-MMC-010 – Distilling Plant – Model 2-

TCFE-6-SC

Coast Guard Technical Publication (TP) 5200, S6220-B4-MMC-010, Compressor, High Pressure

Breathing Air, Model K15-E3 Coast Guard Technical Publication (TP) 5207, S9555-DM-MMC-010, Fire Extinguishing System, High

Pressure Carbon Dioxide Coast Guard Technical Publication (TP) 5214, 01-NOV-03, SG700-AM-MMC-010 - Hydraulic Power

Unit (HPU), Aft General Service Coast Guard Technical Publication (TP) 5221, 01-NOV-03, SG700-AP-MMC-010 - A-Frames Coast Guard Technical Publication (TP) 5223, SWBS 572, 2005, Dumbwaiter (200 Lb Capacity) – Model

20700 Coast Guard Technical Publication (TP) 5243, 2022, SG811-B4-MMC-010 – Crane, Electro-Hydraulic

Telescoping Boom – Model TB60-65 Coast Guard Technical Publication (TP) 5243, Nov 2013, SG811-B4-MMC-010 – Crane, Electro-

Hydraulic Telescoping Boom – Model TB60-65 Coast Guard Technical Publication (TP) 5244 July 2004, SG811-B5-MMC-010 – Single Articulating

Boom Crane – Model K40-55 Coast Guard Technical Publication (TP) 5244, 2022, SG811-B5-MMC-010 – Single Articulating Boom

Crane – Model K40-55 (aft starboard) Coast Guard Technical Publication (TP) 5245, 2022, SG811-C5-MMC-010 - Crane, Primary Telescoping

Boom Pedestal Type – Model 100-55 (port 04) Coast Guard Technical Publication (TP) 5245, 2022, SG811-C5-MMC-010 - Crane, Primary Telescoping

Boom Pedestal Type – Model 100-55 xi (Draft-0)

Coast Guard Technical Publication (TP) 5246, 2022, SG811-C6-MMC-010 - Crane, Knuckleboom (aft port)

Coast Guard Technical Publication (TP) 5246, 2022, SG811-C6-MMC-010 - Crane, Knuckleboom Coast Guard Technical Publication (TP) 5249, SWBS 589, 2003, SG825-A3-MMC-010 - 1000 Lb

Capacity Stores Hoist Coast Guard Technical Publication (TP) 5250, 01-NOV-03, SG825-Ay-MMC-010 - Hoist, Science

(6000-Lb Capacity) Coast Guard Technical Publication (TP) 5250, SWBS 589, 2005, SG825-AY-MMC-010 - 6000 Lb

Capacity Science Hoist Coast Guard Technical Publication (TP) 5251, SWBS 589, SG825-AZ-MMC-010 - 600 Lb Capacity

Trash Hoist Coast Guard Technical Publication (TP) 5262, SWBS 591, May 2020, Science Winch, Mechanical

System & Wire Handling (Volume 1) Coast Guard Technical Publication (TP) 5263, SWBS 591, Nov 2003, Science Winch, Mechanical

System & Wire Handling (Volume 2) Coast Guard Technical Publication (TP) 5264, SWBS 591, Nov 2003, Science Winch, Mechanical

System & Wire Handling (Volume 3) Coast Guard Technical Publication (TP) 5336, 06-NOV-07, The Cranesmart "LMI" System Coast Guard Technical Publication (TP) 5336, 2007, The Cranesmart "Lmi" System Coast Guard Technical Publication (TP) 5359, 2023, Boiler Water Management System – Chem Aqua

Water Treatment Program Coast Guard Technical Publication (TP) 5502, 2020, Fire Suppression System - Model WHDR Coast Guard Technical Publication (TP) S9555-CH-MMA-010, 2008, AFFF Firefighting Hose Reels –

Models NL20MB, NL20M-200B Coast Guard Technical Publication 5232 S9538-AR-MMC-010 – Davit Winch & HPU (Rescue Boat)

Volume 1 Coast Guard Technical Standard (TS) 591, Rev -, Oceanographic Research Equipment Fire Prevention and Response Maintenance Procedure Card D-Q-8433 Helicopter Tie Down Fittings, Inspect MIL-DTL-32585A, 2021, Insulation, Thermal and Acoustic, Fibrous Glass MIL-PRF-1149E, 2019, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness MIL-STD-1689A, Nov 1990, Fabrication, Welding, and Inspection of Ships Structure

NOTE

OTHER REFERENCES

Surface Forces Logistic Center Technical Standard (SFLC TS) 583-2, 2019, Shipboard Boat Hoisting

Systems Surface Forces Logistic Center Technical Standard (SFLC TS) 589, 2020, Cranes Surface Forces Logistics Center Standard Specification (SFLC Std Spec 0000), 2022, General

Requirements Surface Forces Logistics Center Standard Specification (SFLC Std Spec 0740), 2022, Welding and Allied

Processes Surface Forces Logistics Center Standard Specification (SFLC Std Spec 6310), 2022, Requirements for

Preservation of Ship Structures xii (Draft-0)

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2024, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Jan 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Latest Version, General Requirements

Surface Forces Logistics Center Standard Specification 0000, (SFLC Std Spec 0000) 2022 Edition, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes.

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 0740, (SFLC Std Spec 0740) 2022 Edition, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 3020 (SFLC Std Spec 3020), 2022, Overhaul AC Electrical Motors

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3041, (SFLC Std Spec 3041) 2022 Edition, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard Electrical Cable Removal, Relocation, Splice, Repair, And Installation

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042, (SFLC Std Spec 3042) 2022 Edition, Shipboard Electrical Cable Removal, Relocation, Splice, Repair and Installation

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary Machinery Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Requirements for Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary Machinery Systems xiii (Draft-0)

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2024, Auxiliary Machine Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2020, Clean Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2022, Clean Shipboard Ventilation Systems

Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ships Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirement for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ships Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2024, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6310, (SFLC Std Spec 6310) 2022 Edition, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2022, Install Interior

Deck Covering Systems Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2022, Drydocking Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2022, Temporary

Services Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2022, Temporary

Hull Access The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Bare Metal Power Tool Cleaning Tips and Techniques for Keeping WT Closures Shipshape, 2017, Juniper Industries, Inc.

OTHER REFERENCES

Amerex Inspection, Maintenance, and Recharge Service manual NO. 13259 American National Standards Institute (ANSI/ASA) S2.19, 2004, Mechanical Vibration - Balance Quality

Requirements of Rigid Rotors - Part 1: Determination of Permissible Residual Unbalance American National Standards Institute (ANSI/EASA) AR100-2006, 2006, Recommended Practice for the

Repair of Rotating Electrical Apparatus American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2019, Disinfection of Water-Storage Facilities American National Standards Institute/NSF International (ANSI/NSF) 61, 2020, Drinking Water System

Components - Health Effects American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, 2020, Personnel Qualification and Certification in Nondestructive Testing xiv (Draft-0)

American Society for Nondestructive Testing (ASNT), Standard No. ANSI/ASNT CP-189-2020, 2020, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel

American Society for Testing and Materials (ASTM) F1321, Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) To Determine the Light Ship Displacement and Centers of Gravity of a Vessel, 1992 (R2004)

American Society of Mechanical Engineers (ASME) A17.2, Guide for the Inspection of Elevators, Escalators and Moving Walks

American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of Welds

American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of Welds American Welding Society (AWS) D1.1/D1.1M, 2020, Structural Welding Code – Steel ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D5363, 2003, Standard Specification for Anaerobic Single Component

Adhesives ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component

Adhesives (AN) ASTM International (ASTM) F1836M, Reapproved 2007, Standard Specification for Stuffing Tubes, Nylon and Packing Assemblies (Metric) ASTM International (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting

Corrosion ASTM Internationals (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting

Corrosion Code of Federal Regulations (CFR) Title 29, Part 1910, 2017, Occupational Safety and Health Standards Code of Federal Regulations (CFR) Title 29, Part 1910, Jul 2017, Occupational Safety and Health

Standards Code of Federal Regulations (CFR) Title 29, Part 1910, Subpart T, 2007, Commercial Diving Operations Code of Federal Regulations (CFR) Title 29, Part 1910, Subpart T, 2023, Commercial Diving Operations Code of Federal Regulations (CFR) Title 29, Part 1915, 2013, Occupational Safety and Health Standards for Shipyard Employment Code of Federal Regulations (CFR) Title 29, Part 1915, Jul 2013, Occupational Safety and Health

Standards for Shipyard Employment Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for

Shipyard Employment Code of Federal Regulations (CFR) Title 40, 2013, Protection of the Environment Code of Federal Regulations (CFR) Title 40, Jul 2013, Protection of the Environment Federal Specification (Fed Spec) HH-P-151, Mar 1991, Packing; Rubber-Sheet, Cloth Insert Federal Specification (Fed Spec) QQ-N-281, Oct 1985, Nickel-Copper-Aluminum Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, And Structural and Special Shaped Sections Federal Specification (Fed Spec) QQ-N-281D (2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Federal Specification (Fed Spec) QQ-N-281D(2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Federal Specification (Fed Spec) QQ-N-281D(2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Huber A-Frame Drawing HI-571-1001, Rev C xv (Draft-0)

MIL-A-21016F, 2021, Adhesive, Resilient Deck Covering MIL-A-46106B, 2019, Adhesive-Sealants, Silicone, RTV, One-Component MIL-DTL-1222, Dec 2000, Studs, Bolts, Screws and Nuts for Applications Where a High Degree of

Reliability Is Required; General Specification for MIL-DTL-15024, General Specification for Plates, Tags, and Bands for Identification of Equipment MIL-DTL-15090, Nov 1996, Enamel, Equipment, Light Gray, (Navy Formula No. 111) MIL-DTL-15562G, 2021, Matting or Sheet, Floor Covering Insulating for High Voltage Requirements MIL-DTL-24643, General Specification for Low Smoke Electric Cables and Cords for Shipboard Use MIL-DTL-32585A, 2021, Insulation, Thermal and Acoustic, Fibrous Glass MIL-PRF-1149E, 2019, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness MIL-PRF-16173E w/Interim Amendment 2, 2017, Corrosion Prevention Compound, Solvent Cut Back, Cold Application MIL-PRF-24176C, 2020, Cement, Epoxy, Metal Repair and Hull Smoothing MIL-PRF-24613A, 2017, Deck Covering Materials, Interior, Cosmetic Polymeric MIL-PRF-24667C w/Int. Amendment 1, 2018, Coating System, Non-Skid, for Roll, Spray, or Self-

Adhering Application MIL-PRF-24667D, 2021, Coating System, Non-Skid, for Roll, Spray, or Self-Adhering Application MIL-PRF-24712B, 2014, Coatings, Powder, Thermosetting MIL-PRF-3135H, 2021, Deck Covering Underlay Materials MIL-PRF-32584A, 2022, Deck Covering Materials, Monolithic MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness MIL-STD-1310 (series), Shipboard Bonding, Grounding, and Other Techniques for Electromagnetic

Compatibility, Electromagnetic Pulse (EPM) Mitigation and Safety MIL-STD-1689A, 1990, Fabrication, Welding, and Inspection of Ships Structure MIL-STD-1689A, Nov 1990, Fabrication, Welding, and Inspection of Ships Structure MIL-STD-2003, Electric Plant Installation Standard Methods (Section 1: Cable) MIL-STD-2003, Electric Plant Installation Standard Methods (Section 2: Equipment) MIL-STD-2003, Electric Plant Installation Standard Methods (Section 3: Penetrations) MIL-STD-2003, Electric Plant Installation Standard Methods (Section 4: Cableways) National Fire Protection Association standard NFPA-10 (Portable Fire Extinguishers) Naval Air Warfare Center (NAVAIR) NAEC ENG 7576, 2009, Shipboard Aviation Facilities Resume Naval Sea Systems Command (NAVSEA) 0640-LP-119-0175, 2019, NAVSEA OP 4 Rev 12, Ammunition and Explosives Safety Afloat Naval Ship's Technical Manual (NSTM) Chapter 556, Rev 9, Hydraulic Equipment Power Transmission and Control Naval Ship's Technical Manual (NSTM) Chapter 613, Wire and Fiber Rope Rigging Naval Ships Technical Manual S9086-GY-STM-010, 2021, Chapter 221 NAVSEA 4730/3, 2004, Driver Hull Inspection Data NAVSEA S0600-AA-PRO-170, Rev 2 Change A, 2014, Underwater Ship Husbandry Manual, Chapter

17 Inspections NAVSEA S0600-AA-PRO-170, Rev 2 Change A, Apr 2014, Underwater Ship Husbandry Manual, Chapter 17 Inspections NAVSEA S9583-AR-MMC-010, VOL 1, Davit, Winch & HPU, Rescue Boat (RHIB) xvi (Draft-0)

NAVSEA SG700-AM-MMC-010/34712, Power Unit, Hydraulic, Aft General Service

NAVSEA SG700-AM-MMC-010/34712, POWER UNIT, HYDRAULIC, AFT GENERAL SERVICE

NAVSEA SG700-AP-MMC-010, Rev -; Preliminary Operation & Maintenance Manual for WAGB-20

Polar Icebreaker a-Frames NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for

Fabrication, Welding, and Inspection of Submarine Structure Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183A, 2019, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183B, 2019, Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification AMS-S-8802, 2019, Sealing

Compound, Temperature-Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High-Adhesion SSPC VIS 2, 2008, Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2016, Solvent Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Bare Metal Power Tool Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.2 (SSPC-SP 2), 2004, Hand Tool Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2018, Power Tool Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 5 (WAB)/NACE WAB-1, 2015, White Metal Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 5/NACE No. 1, 2007, White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP 10/NACE No.2, 2004, Near-White Blast Cleaning

Underwater Ship Husbandry Manuals USCG, HWSL Guidance/Fall Protection Plan, Working Aloft Aboard Cutter xvii (Draft-0)

CONSOLIDATED LIST OF GOVERNMENT-FURNISHED PROPERTY

The following is a list of property, which the Government will furnish. This list supersedes any other material obligations indicated or implied by referenced drawings.

WORK

ITEM

MTI ITEM DESCRIPTION NSN/PN QTY ESTIMATED

COST

($/UNIT)

2 N Talon Grid Fixation

Bolts, (Screw, Cap Socket Head, 5/8”-11 UNC-2A, Length 80 mm (3.15”) -Special)

NSN: 5305-01-393-1827 (CG

Dwg FL-588-003, PC# 17)

24 ea. ~32.00

2 N Talon Grid Assembly Bolts, (Screw, Cap

Socket Head, M12 x

1.75 Pitch, Overall

Length 42 mm (1.6535”), Thread

Length 30 mm (1.1811”), with Hex

Head Drive 3/8”)

NSN: 5305-01-584-6095 (CG

Dwg FL-588-003, PC# 18)

12 ea. ~42.00

2 N Talon Grid Stanchion Bolts and Lock Nuts, (Stanchion Bolts, SS316, from Round

Bar Dia 7/8”, Locknuts, Hex, M14 x 2.0-6H, SS316, with

Nylon Insert)

NSN: 5340-01-481-3786 (CG

Dwg FL-588-003, PC# 19 &

20)

30 ea. ~40.00

2 N Jacking Bolts, (Bolt, Hex, 5/8"-11 UNC, Length 4”, Steel)

Commercial, N/A (CG Dwg

FL-588-003, PC# 21)

6 ea. ~20.00

2 N Talon Grid Stanchion Lock Nuts, (Locknuts, Hex, M14 x 2.0-6H, SS316, with Nylon

Insert)

NSNS : N/A (CG DWG FL-

588-003 PC#20)

100 ea. ~20.00

4 N Wire Rope, 5/8” 6x37 EIPS RR-W-410 Type

1 Class 3

PN: EIPS RR-W-410 260 ft $20,000

5 N Wire Rope, 5/8” 6x37 EIPS RR-W-410 Type

1 Class 3

PN: EIPS RR-W-410 125 ft $15,000

7 N Wire Rope, 5/8” 6x37 EIPS RR-W-410 Type

1 Class 3

PN: EIPS RR-W-410 150 ft $16,000

7 N Wire Rope, 7/8” 6x37

EIPS IWRC RRL

PN: EIPS IWRC RRL 350 ft $25,000

8 N Wire Rope, 5/8” 6x37 PN: EIPS RR-W-410 200 ft $20,000 xviii (Draft-0)

EIPS RR-W-410 Type 1 Class 3

8 N Wire Rope, 7/8” 6x37

EIPS IWRC RRL

PN: EIPS IWRC RRL 500 ft $25,000

20 N Grindre. Solids, EZ Strip TR Muncher 5.0

HP

ST203QFW1A1S 1 $38,000

20 N Controller Panel 5285-e-5000000 1 $23,215 22 N Conductivity Sensor, Complete Item No 101

PN: 150-003-D-046-23-1 8 $1,115

22 N Adapter, Bushing, Item No 102

PN: 150-003-D-046-23-2 8 $50

22 N Snap Ring, Item No

PN: 150-003-D-046-23-3 8 $5

22 N Nut, Item No 104 PN: 150-003-D-046-23-4 8 $5

22 N O-Ring, No 105 PN: 150-003-D-046-23-5 8 $5

28 N Raised Watertight Hatch, Complete

Overhaul Kits

NAVSEA Dwg NNN- NNNNNNN Rev. N, Assy NN- X, (Juniper XXNNN-XX-NN)

1 ea. N,NNN.NN (incl.

S&H)

28 N Closure Gasket, ~24 ft/WTCs (Gasket GRV

0.5x1.2 30D R-SIL, AA-59588 (ZZ-R-765)

Gr 30 Cl 3B, 160 ft Roll)

NAVSEA Dwg. -, Juniper

JE4503-ZZ

1 ea. ~1,000.00 (incl.

S&H)

29 N 60 in x 96 in x 8 in Watertight Double

Door, Complete Overhaul Kits

NAVSEA Dwg NNN- NNNNNNN Rev. N, Assy NN- X, (Juniper XXNNN-XX-NN)

3 ea. N,NNN.NN (incl.

S&H)

29 N Closure Gasket, ~42 ft/WTCs (Gasket GRV

0.5x1.2 30D R-SIL, AA-59588 (ZZ-R-765)

Gr 30 Cl 3B, 160 ft Roll)

NAVSEA Dwg. -, Juniper

JE4503-ZZ

1 ea. ~1,000.00 (incl.

S&H)

30 N 54 in x 88 in x 8 in QAWT within

Watertight Door, RH, Complete Overhaul

Kitsr

NAVSEA Dwg NNN- NNNNNNN Rev. N, Assy NN- X, (Juniper XXNNN-XX-NN)

8 ea. N,NNN.NN (incl.

S&H)

30 N 54 in x 88 in x 8 in QAWT within

Watertight Door, LH, Complete Overhaul

Kits

NAVSEA Dwg NNN- NNNNNNN Rev. N, Assy NN- X, (Juniper XXNNN-XX-NN)

1 ea. N,NNN.NN (incl.

S&H)

30 N Closure Gasket, ~40 ft/WTCs (Gasket GRV

0.5x1.2 30D R-SIL, NAVSEA Dwg. -, Juniper

JE4503-ZZ

3 ea. ~1,000.00 (incl.

S&H) xix (Draft-0)

AA-59588 (ZZ-R-765)

Gr 30 Cl 3B, 160 ft

Roll) 30 N Fixed Light 9” Gaskets

(Gasket Sht .12x9.375OD B-Rub, 803-6397269-185 (Dia), 2 pc/set)

NAVSEA Dwg. 803-6397268- 185 (Dia), Juniper JE269-185-

9 ea. 100.00

31 N O-Ring NSN: 5331-01-423-7249 P/N: 19948-94

31 N Diaphragm, Small NSN: 4820-00-036-1700 P/N: 19446

31 N Diaphragm. Large NSN: 4820-00-036-1699 P/N: 19745

31 N Gasket NSN: 5330-01-365-4366 P/N: 19153-67

31 N Adjusting Spring NSN: 5360-00-291-1219 P/N: 12475

31 N Extension Pin NSN: 5315-01-109-1246 P/N: 47097

31 N Nozzle NSN: 2910-00-896-9567 P/N: 22339

31 N O-Ring NSN: 5330-00-919-8384 P/N: 42213

31 N Gasket NSN: 5330-01-431-7320 P/N: 47916-95

31 N Pressure Gage Operating Supply

NSN: 6685-01-103-8453

P/N: 52354

31 N Pressure Gage Control Valve

NSN: 6685-01-103-8453

P/N: 52354

31 N Adjusting Pin NSN: 5315-01-109-1816 P/N: 12401

31 N Adjusting Spring NSN: 5360-00-919-8386 P/N: 51483

31 N O-ring NSN: 5330-00-919-8384 P/N: 42213-94

31 N Gasket NSN: 5330-01-431-7320 P/N: 47916-95

31 N Gage NSN: 6685-01-103-8453 P/N: 52354

31 N Adjusting Pin NSN: 5315-01-189-3567 P/N: 38032

31 N Blade Spring NSN: 5360-00-919-8383 P/N: 38036

31 N Nozzle NSN: 4820-01-365-2967 P/N: 47909

31 N Cover Screw Washer NSN: 5310-01-154-0499 P/N: 57685

31 N Diaphragm Spring NSN: 5360-00-291-7155 6 xx (Draft-0)

P/N: 10980 31 N Gasket NSN: 5330-01-091-2619

P/N: 23815

31 N O-ring NSN: 5331-01-251-9197 P/N: 23955

31 N Diaphragm NSN: 4820-00-621-5755 P/N:37819

31 N Gasket NSN: 5330-00-763-0429 P/N: 37845

31 N Packing NSN: 5330-00-919-8384 P/N:4221394

31 N Packing Retainer NSN: 5330-01-249-1685 P/N: 62368

31 N Shaft NSN: 3040-01-248-1501 P/N: 62373

31 N Bearing Sleeve NSN: 3110-01-253-8912 P/N: 62376

31 N Seal NSN: 5330-01-249-1628 P/N: 62393

31 N U-Cup NSN: 4820-01-247-9863 P/N: 62440

34 N Hall Effect Sensor 1 $25,220 41 N O-ring NSN: 5331-01-249-1634

P/N:60319 6 $4,000

41 N 5” Butterfly Valve, Bronze Mil-V-24624

N/A 1 ea. $5,400

41 N 2-1/2” Butterfly Valve, Bronze w/ gear

N/A 2 ea. $3,000

12 N Cab Control Panel for

TB60.

PN: 44351 1 3,000.00

N

Steam Coil Pre-Re Heater

DWG-H-Tube/22464C5300-

MOS-IB-V-51206-47 8

$192,520

45 N DMU Cabinet “ 1 Signal

12934-6 5 $12,000

45 N DMU Cabinet “ 6 Signal

12934-4 3 $12,000

45 N DMU Cabinet “ 3 Signal

12934-2 2 $12,000

45 N Gasket, 3, Neoprene 10401 26 $27.42 45 N Mounting Bar w/ Slot, 304SS

14968 40 $125.54

*Government-loaned property, which shall be returned to the vessel upon completion of the availability.

**New or refurbished equipment that the Government may provide for installation in place of existing equipment.

***Government-furnished property, which is to be supplied by either the vessel or the C4IT ServiceCenter xxi (Draft-0)

CONSOLIDATED LIST OF CRITICAL INSPECTION ITEMS

The following is a list of work items, which contain Critical Inspection reports, which the Contractor must complete within the first 25% of the availability contract period (see SFLC Std Spec 0000, paragraph 3.2.6.5 (Inspection report particulars)):

Work Item Title

2 Talon Grid (Type 18-22-01), Inspect and Test

3 Boiler, Annual Maintenance

4 Aft Crane (Port), Annual Inspect and Repair

23 Geislinger Coupling, 20,000-hour Service

5 Bow Crane, Annual Inspect and Test

7 Aft Crane (Starboard), Annual Inspect and Repair

9 Port & Starboard Miranda Davit, Annual Inspect and Repair

6 A-Frames, Annual Inspection

8 04 Deck Crane (Port) TB 100-55, Annual Inspect and Test

15 Tanks, Ballast, Preserve, 100 Percent

25 Trawl / Core Winch, Inspect and Test xxii (Draft-0) xxiii (Draft-0)

PRINCIPAL CHARACTERISTICS

420' WAGB (CGC HEALY)

PHYSICAL

Length overall 420' Length between perpendiculars 396' 6" Beam, extreme 82' 0" Depth amidships to main deck 42' 0" Draft to bottom of keel @ full load 29' 3" Full load displacement 16,423 long tons Effective keel length 230' 0" Mast height above DWL @ 28' draft 158' 3/8"

HULL

Frame spacing 30" Material Hull ASTM A131, GR EH 36, or ABS EH 36 Flight deck ASTM A131, GR EH 36, or ABS EH 36 Superstructure ASTM A131, GR EH 36, or ABS EH 36

MACHINERY

Propulsion 4 Sultzer 12Z a V 40S

2 AC Synchronous, 11.2MW Drive Motors Auxilary generator 1 EMD 16-645F7B, 2200 KW, 450V AC, 3 phase Rudder 2 Anchor & chain Two 13,200 lbs Navy Stockless, 150 fathoms chain Port, 165 fathoms chain

Starboard

TANKS

Diesel oil or JP-5 (@ 95%) 1,187,117 gal.

JP-5 (Helo) (@ 95%) 56,434 gal.

9250 lube oil (@ 95%) 24,794 gal.

Fresh water (@ 95%) 34,553 gal.

Hydraulic oil (@95%) 8,571 gal.

Ballast water (@95%) 899,776 gal.

1 (Draft-0)

00000_0623_FLT

REC_00000_FLT_Commercial Project @ CG Facility (0121)

General Requirements

1. SCOPE

1.1 Intent. This standard specification invokes general requirements for conducting vessel repairs performed by commercial contractors at a Coast Guard facility for Coast Guard vessels.

1.2 Term interchangeability. The terms 'Contractor', 'CG Yard', 'NAVSTA EVERETT', 'shipyard', 'Base', and 'Coast Guard Industrial' are used interchangeably in this specification. Where the primary service provider is Coast Guard personnel, references to contractor and other noted descriptors within this specification or within drawings, publications, SFLC Standard Specifications or other commercial and military references are deemed the same as prime service provider.

2. REFERENCES

COAST GUARD DRAWINGS

None

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (series), Coatings and Color Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), Latest Version, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, Fire Prevention and Response Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures

OTHER REFERENCES

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for

Shipyard Employment NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for

Fabrication, Welding, and Inspection of Submarine Structure

2 (Draft-0)

3. REQUIREMENTS

3.1 General. The Contractor must conform to all requirements specified in SFLC Std Spec 0000 and in this item, as applicable, during the performance of this availability. The requirements in this WI applies to all work under the scope of this contract, whether explicitly stated in all following work items or not, and to all other work subsequently authorized by changes, modifications, or extensions to the contract.

3.1.1 The Contractor must conform to all requirements specified in SFLC Std Spec 5550 and in the Fire Protection and Response work item, as applicable, during the performance of this availability.

3.1.1.1 Fire Safety Plan submission. The Contractor must submit a copy of the CFR 1915, Subpart P, Fire Safety Plan with the Contractor’s bid when work will be conducted in a Contractor–owned facility. Include any MOA(s) with local firefighting facilities.

3.1.1.2 Fire Plan submission. The Contractor must submit a copy of the developed availability specific fire plan, as requested in the Fire Protection and Response work item, seven (7) days before the Arrival Conference.

NOTE

NAVSEA drawings listed will be available FOR INSPECTION ONLY from the Coast Guard Port Engineer post-award. SFLC will not redistribute NAVSEA documents.

Contractors can apply to NAVSEA headquarters directly for copies.

3.2…