Attachment_1_-_Scope_of_Work.docx

Dinosaur National Monument

STATEMENT SCOPE OF WORK:

Utah Residence Fencing repair and installation

PMIS # NA

DATED: September 2025 Revised: March 2026

NATIONAL PARK SERVICE

Regions 6, 7, 8

Quarters Fencing Installation SOW DINO

Introduction:

Dinosaur National Monument, spanning over 210,000 acres along the Colorado–Utah border, is renowned for its world-class Jurassic-period fossil beds, most famously displayed at the Quarry Exhibit Hall where more than 1,500 fossils remain embedded in rock. Managed by the National Park Service, the monument protects a diverse landscape of deep river canyons carved by the Green and Yampa Rivers, high desert plateaus, and riparian corridors, as well as significant cultural resources including ancient Fremont petroglyphs, historic homesteads, and early ranching sites. Its rugged terrain offers opportunities for paleontological research, hiking, rafting, wildlife viewing, and stargazing, while also presenting unique preservation and access challenges that require careful planning to protect sensitive fossil deposits, archaeological sites, and endangered species habitats.

Objective:

The work requires To removale, replacement, and restoringe designated fencing to ensure safety, durability, aesthetic consistency, and proper boundary definition throughout the project area, located near .11625 East 1500 South, Jensen, Utah.

Scope:

1. Contractor shall provide all material, equipment, parts and labor required to perform all the work of this contract.

2. Contractor will remove 150 linear feet of existing fencing at the specified location.

3. All fence post replacements shall occupy the same holes and placement as original posts. Placement of new posts will be designated by Park and digging will be monitored by park staff.

4. All equipment, material and waste removed or generated by work of this contract shall be properly disposed of offsite by the contractor.

5. Contractor shall verify the length of fencing and quantity of materials needed to complete the task identified in this statement of work (SOW).

6. Contractor will repair damaged sections of existing wood fence at specified locations and apply new 5-year warranty stain in color specified by park.

7. Repairs may include replacing boards/panels, posts, rails and hardware as needed.

8. Contractors shall provide a work site and environment that is safe for employees, for visitors to the park, and NPS staff. The work area shall be cordoned off (if necessary) and secure.

9. Contractors shall leave the worksite clean and free of construction debris.

10. All work shall be performed Monday through Friday from 8:00 am until 4:00 pm. No work shall be performed on weekends or federal holidays without prior approval.

11. Contractor and employee parking and equipment storage areas shall be designated by the Park. No company signs shall be installed on government property. Smoking and eating shall be performed in areas designated by the Park. Employees shall always wear appropriate clothing including company shirts or other way to identify contractors.

12. Contractors shall notify NPS staff of scheduled site visits to ensure access to secure areas.

13. The Davis-Bacon Act applies for this contract.

Specific Requirements:

See attached photos for examples of each fence type listed below.

· Cedar fence specification

· Color: Natural Wood Stain 5 year warranty

· Height: 6’

· Style: Privacy fence panel

· Post placement: Existing Post hole placement

· Gates: 6’x4’ Chain Link

· Latches:1

· Locations for installation

· Locations:

1. Quarters 4-4: Removal and installation Length 180 linear ft. No gate.(see map)

2. Quarters 4-5: Length 180 linear ft. repair as needed, prep and stain.

3. Quarters 4-6: Length 200 linear ft. repair as needed, prep and stain.

4. Quarters 4-7: Length 200 linear ft. install new privacy wood fencing and 4’ wide chain link gate and latch.

· Installation requirements:

· Layout and mark fence line per approved site plan

· Remove vegetation and debris along fence line

· Excavate post holes to required depth and diameter

· Use same, when possible, of removed fence posts

· Underlayment of rodent material under fence lines approved by park.

To prevent animals from getting under a fence, install a wire mesh barrier (like chicken wire or hardware cloth either by burying it several inches into the ground that extends outwards from the fence and is then covered with soil, rocks, or mulch. (Optional)

Submittals:

Contractor shall submit cut sheets to the COR for material approval prior to use for the following items:

1. Product Submittals (Cut Sheets):

a. fence material: (Cedar, stain color, size, etc.)

b. Rodent underlayment: (wire mesh barrier, hardware cloth)

c. Hardware (latches, etc.)

d. Chain link gate

Period of Performance:

86/1/2026-105/31/20267 Safety:

All work performed on government property shall be accomplished in accordance with OSHA, EPA, Federal, State and local regulations and requirements. Prior to starting work on government property, the contractor shall submit to Dinosaur National Monument (DINO) for approval a copy of their company safety plan pertaining to this particular contract. Although not all inclusive, the safety plan must address at a minimum the following areas:

1) Confined space operations (if required)

2) Heavy equipment operations (if required)

3) Public/visitor safety (barriers/signage, etc.)

4) Traffic safety plan (if required)

5) Trenching/sloping of soil

6) Personal protective equipment to be used

7) Hazardous materials (HAZMAT) to be used

a. Copies of Safety Data Sheets must be provided to DINO

b. Storage of HAZMAT

8) Emergency response protocols

9) Personnel training requirements

Contractor shall use “green” products whenever possible, and all HAZMAT must be pre-approved for use by the CARI Collateral Duty Safety Coordinator. The contractor shall be responsible for the safety and security of the site to ensure unauthorized personnel (park visitors & employees) do not enter the construction area.

Security & Work Hours:

Contractor shall only perform this work during normal operating hours,, Monday through Friday, excluding Federal holidays, between (8:00am – 4:00pm), unless approval is given by the National Park Service.

Fence map and locations: 4-4, 4-5,4-6,4-7 Remove and install fencing 4-4 Install new fencing 4-7 Stain and repair fencing

Figure 2-6'x8' panel

4’x 6’ image1.png image2.png image3.png image4.png image5.png image6.png image7.png image8.png image9.png image10.png image11.png image12.png image13.png image14.png image15.png image16.png image17.png image18.png image19.png image20.png image21.png image22.png image23.png image24.png image25.png image26.png image27.png image28.png image29.png image30.png image31.png image32.png image33.png image34.png image35.png image36.png