ATTACHMENT 1_C and E QAPS.pdf

C16.52 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE (PETROLEUM, GRADE 1010) (LA6) (A QUALIFIED

PRODUCT) (DLA ENERGY JUN 2016)

(a) Specification MIL-PRF-6081E dated 12 December 2014, applies.

(b) The Lubricating Oil used shall be of the type and grade in the Qualified Products Database (QPD). Qualified Products Listing (QPL) QPL-6081-30 Notice 1, dated February 27, 2008, is a Notice of Transformation that cancels this QPL and replaces the information with the new Qualification Data Set (QDS). To locate this information, you must link to the QPD at:

http://qpldocs.dla.mil/search/parts.aspx?qpl=2190.

Signature

Prepared by:

Quality / Technical Support Office Approval:

Contracting Approval:

Legal Approval:

(Only required for E QAPs)

DISTRIBUTION STATEMENT – A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED

TAYLOR.LORI.L.1391585080

Digitally signed by TAYLOR.LORI.L.1391585080 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=DLA, cn=TAYLOR.LORI.L.1391585080 Date: 2016.06.16 13:47:59 -04'00'

BANISZEWSKI.DANIEL.J.128

7388698

Digitally signed by BANISZEWSKI.DANIEL.J.1287388698 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=DLA, cn=BANISZEWSKI.DANIEL.J.1287388698 Date: 2016.06.16 13:54:44 -04'00'

SHEPHERD.SANDRA.S.10125684

Digitally signed by SHEPHERD.SANDRA.S.1012568459 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=DLA, cn=SHEPHERD.SANDRA.S.1012568459 Date: 2016.06.23 08:03:17 -04'00'

DEFENSE LOGISTICS AGENCY ENERGY

8725 JOHN J KINGMAN ROAD

FORT BELVOIR, VIRGINIA 22060-6222

DISTRIBUTION STATEMENT – A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED

C16.56 LUBRICATING OIL, CATAPULT LAUNCH ENGINE (CLB) (DLA ENERGY

AUGUST 2020)

Product Classification

NATIONAL STOCK NUMBER

PRODUCT NOMENCLATURE

DLA ENERGY

PRODUCT CODE

9150-01-690-2455

Lubricating Oil, Catapult Launch Engine

CLB

This lubricating oil, for use in steam catapult launch engine, shall be furnished in the following grade:

SAE Viscosity Table

Military Grade

Commercial Grade

60 1120 120

(a) REQUIREMENTS. Steam catapult launch engine lubricating oil shall conform to the requirements of specification MIL-PRF-32644(AS) dated January 29, 2020.

(b) FIRST ARTICLE INSPECTION (FAI) REQUIREMENTS. To be eligible to become a CLB supplier, product first article inspection requirements must be satisfied as defined in MIL-PRF-32644(AS), January 29, 2020, paragraph 4.3, First Article Inspection.

(c) FIRST ARTICLE INSPECTION (FAI) REPORTS.

(1) Provide a copy of the FAI Report, on the first production lot of the finished lubricant, to NAVAIR Lakehurst, per MIL-PRF-32644(AS), paragraph 4.3 requirement. A carbon copy can be emailed to michael.sikora@navy.mil

(2) Provide a copy of the FAI Report, on the first production lot of the finished lubricant, to DLA Energy Quality Office via email: DLAEnergyLabRpt@dla.mil

(3) Provide a copy of the FAI Report to the Wide Area Work Flow (WAWF) Energy Receiving Report (RR) database for each first production lot of lubricant oil produced for the U.S. Government. This is required to document Government contract quality assurance and compliance.

(d) CONFORMANCE INSPECTION REPORTS.

(1) Provide a copy of the Conformance Inspection Reports, verifying technical acceptability, on each lot of oil produced for the U.S. Government to the following:

• NAVAIR Lakehurst, per MIL-PRF-32644(AS), paragraph 4.3 requirement. A carbon copy can be emailed to michael.sikora@navy.mil

• DLA Energy Quality Office via email: DLAEnergyLabRpt@dla.mil

• WAWF Energy Receiving Report database

(e) QUALIFICATION.

(1) Paragraph 4.3 of specification MIL-PRF-32644(AS) dated January 29, 2020 applies.

(2) Contact with Naval Air (NAVAIR) Lakehurst, Warfare Center Aircraft Division is required prior to any qualification or requalification testing. Detailed information on qualification procedures is available from:

COMMANDER, NAVAL AIR WARFARE CENTER

AIRCRAFT DIVISION LAKEHURST

STEAM CATAPULT ALRE* (ENGINEERING BRANCH)

BL51430, BLDG. 596

ROUTE 547

JOINT BASE MDL, NJ 08733-5100

Quality/Technical Support Office Approval:

Contracting Approval:

STEPHENS.MAKEENA.1276390119 Digitally signed by STEPHENS.MAKEENA.1276390119 Date: 2020.08.05 14:23:17 -04'00'

BANISZEWSKI.DANIEL.J.1287388

Digitally signed by

BANISZEWSKI.DANIEL.J.1287388698

Date: 2020.08.05 14:36:57 -04'00'

RALPH.ERIN.S.1229663042 Digitally signed by RALPH.ERIN.S.1229663042 Date: 2020.08.07 09:15:37 -04'00'

C16.61-1 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE [MS9250 (LO6) (SAE40) and (SAE 15W40)]

(QUALIFIED PRODUCTS) (DLA ENERGY JAN 2015)

(a) Qualified product shall conform to MIL-PRF-009000L(SH) dated 23 December, 2014.

(b) The lubricating oil shall be only those products authorized by the qualification activity, Naval Sea Systems Command

(NAVSEA), for listing on the latest qualified products database (QPL-9000) from http://qpldocs. dla.mil/search/parts.aspx?qpl=1552 prior to contract award. Detailed information on qualification procedures is available from:

NAVAL SEA SYSTEMS COMMANDER, SEA 05S1

1333 ISAAC HULL AVENUE, SE

STOP 5160

WASHINGTON NAVY YARD, DC 20376-5160

(c) Any changes in the formulation of the product submitted for qualification testing shall be approved by NAVSEA. Minor changes, such as an increase in pour point additive, may require only notification; however, the extent of supporting test data required is at the discretion of NAVSEA.

Signature

Prepared by:

Quality / Technical Support Office Approval: Prior approval as contract provision

Contracting Approval: Prior approval as contract provision

Legal Approval:

(Only required for E QAPs)

DISTRIBUTION STATEMENT - A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED

WEDDELL.MARGARET.E.150

2957461

Digitally signed by WEDDELL.MARGARET.E.1502957461 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=DLA, cn=WEDDELL.MARGARET.E.1502957461 Date: 2015.01.23 12:01:58 -05'00'

FORT BELVOIR, VIRGINIA 22060-6222 Page 1 of 1

DISTRIBUTION STATEMENT – A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED

C16.62 LUBRICATING OIL, ENGINE (SAE GRADE 40) (DLA ENERGY JUN 2018)

NATIONAL STOCK NUMBER PRODUCT NOMENCLATURE

DLA ENERGY PRODUCT

CODE

9150-01-555-3598 Lube Oil, SAE 40 grade, gallons L40 9150-01-556-3257 Lube Oil, SAE 40 grade, bag L4B

(a) Product shall be SAE 40 Viscosity Grade and consist of virgin refined stocks. The stocks shall be blended with additives as necessary to meet the specification requirement.

(b) Product must conform to the following specification:

PROPERTY LIMIT TEST METHOD

1. Viscosity @ 40oC 137 mm2/sec ASTM D 445 Viscosity @ 100oC 14.1mm2/sec ASTM D 445

2. Viscosity Index 98 min ASTM D 2270

3. Flash Point 216oC min ASTM D 92

4. Fire Point 246oC min ASTM D 92

5. Pour Point -6oC max ASTM D 97

6. Zinc Content 10 ppm max ASTM D 4628, ASTM D 4927 or ASTM D 6443

7. Total Base Number 9 mg KOH/g min ASTM D 2896

Signature

Prepared by:

Quality / Technical Support Office Approval:

Contracting Approval:

TAYLOR.LORI.L.139158508

Digitally signed by

TAYLOR.LORI.L.1391585080

Date: 2018.06.18 11:10:45 -04'00'

BANISZEWSKI.DANIEL.J.12

87388698

Digitally signed by

BANISZEWSKI.DANIEL.J.1287388698

Date: 2018.06.25 08:09:19 -04'00'

SHEPHERD.SANDRA.S.10

12568459

Digitally signed by

SHEPHERD.SANDRA.S.1012568459

Date: 2018.06.20 09:25:43 -04'00'

C16.63 LUBRICATING OIL, STEAM TURBINE AND GEAR (MS-2190 TEP)

(LTL) (A QUALIFIED PRODUCT) (DLA ENERGY APR 2020)

Product Classification

NATIONAL STOCK NUMBER

PRODUCT NOMENCLATURE

DLA ENERGY

PRODUCT CODE

9150-01-372-6915

Lubricating Oil, Steam Turbine

2190 TEP (LTL)

This steam turbine and gear lubricating oil for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as well as, for general mechanical lubrication can also be identified as the following:

Military Symbol NATO Symbol National Stock Number

2190 TEP O-250 9150-01-372-6915

(a) REQUIREMENTS. Steam turbine lubricating oil shall conform to the requirements of specification MIL-PRF-17331L(SH) AMD 1 dated February 13, 2019, as modified below:

(1) The lubricating oil shall be currently as cited in the Qualified Products

Database (QPD). To access the information listed in QPD-17331, link to the Assistdocs website at https://quicksearch.dla.mil .

(b) SPECIFICATION DEVIATIONS/MODIFICATIONS.

(1) Anti-foam and Demulsifier Additive Tolerance Range: In order to meet specification properties, a tolerance range may be used for both the anti-foam and demulsifier additives versus the exact concentration used at qualification. In order to elect to use a tolerance range, the Contractor must officially submit this request prior to contract award to NAVSEA qualification activity for approval.

(2) Foam Testing (ASTM D892): The use of Option A in ASTM D892 is only allowed if the oil has been blended for at least a week and results are not being used to meet testing requirements at origin. This could include those oils that are being tested at destination or for MIL-STD-3004 requirements.

(c) QUALIFICATION.

(1) Paragraph 4.2 of specification MIL-PRF-17331L(SH) AMD 1 dated February 13, 2019 applies.

(2) Contact with Naval Sea Systems Command (NAVSEA) is required prior to any qualification or requalification testing. Detailed information on qualification procedures is available from:

COMMANDER

NAVAL SEA SYSTEMS COMMAND

ATTN: SEA 05S

1333 ISAAC HULL AVENUE, SE STOP 5160

WASHINGTON NAVY YARD, DC 20376-5160

Quality / Technical Support Office Approval:

Contracting Approval:

STEPHENS.MAKEENA.127639011

Digitally signed by

STEPHENS.MAKEENA.1276390119

Date: 2020.04.15 17:11:18 -04'00'

BANISZEWSKI.DANIE

L.J.1287388698

Digitally signed by

BANISZEWSKI.DANIEL.J.1287388698

Date: 2020.04.15 17:23:27 -04'00'

RALPH.ERIN.S.1229663042

Digitally signed by

RALPH.ERIN.S.1229663042

Date: 2020.04.20 07:37:36 -04'00'