Attachment 02_ 03 SOW Fire Training.pdf

8 MB Posted

Attached to
REPAIR LIVE FIRE TRAINING FACILITY AIRCRAFT MOCK-UP
Solicitation number
FA665626R0006
Issued by

About this file

Written by GovTribe AI ·

This is a Statement of Work (SOW) for repair work on an Aircraft Fire Training Facility (AFTF) aircraft mock-up located at Youngstown Air Reserve Station (YARS), 910th Airlift Wing, Vienna, Ohio. Project number ZQEL 26-0010.

The facility, currently operational with no critical or major deficiencies, has been assessed and requires corrective action to address seven moderate deficiencies and nineteen non-standard/proprietary components identified during an August 2025 inspection finalized in March/April 2026. Primary operational issues include multiple burners requiring troubleshooting and repair: Tail Engine Burner, Wheel Well Burner, Flight Deck Burner, and Cargo Area Burner. Several burners could not be consistently ignited using local ignition systems. Additional deficiencies include one malfunctioning rear sprinkler head serving the cargo-fire area, moderate-to-severe corrosion beneath the aircraft mock-up and around door assemblies, a warped R2 door, warping near cargo-fireplace grating, and absence of functional emergency shutoff capability at the propane storage area. The LPG distribution system lacks solenoid valves, and legacy pneumatic shutoff-valve deficiencies exist. Non-standard components include missing return line from water-conservation pond, absent pond strainer and aeration system, non-standard valve configurations, custom ramp design, and modified washdown-system components. Required work encompasses structural steel repairs and corrosion remediation, aircraft mock-up weld and door repairs, sprinkler-head replacement, and control-system component upgrades. The facility must comply with USAF Technical Order 35EI-2-13-1, NFPA 54, NFPA 58, NFPA 70, NFPA 1003, and NFPA 1402 standards.

View the file

Other files

File Type Posted
Questions and Answers _2 ZQEL 26-0010.pdf PDF
Attachment_02_SOW_AMENDED_Fire_Training.pdf PDF
Question_and_Answers_1_ZQEL_26-0010.pdf PDF
Solicitation Amendment FA665626R00060003 SF 30.pdf PDF
Solicitation Amendment FA665626R00060002 SF 30.pdf PDF
Solicitation Amendment FA665626R00060001 SF 30.pdf PDF
ZQEL_26-0010_Combined_Synopsis_Solicitation(2).docx DOCX document
Base Access Requirements ZQEL 26-0010.pdf PDF
Solicitation - FA665626R0006.pdf PDF
Attachment 05 Question Submission Form ZQEL 26-0010.docx DOCX document
Base Access Requirements ZQEL 26-0010.docx DOCX document
Attachment 01 WD OH20260101 05_18_2026.pdf PDF
Attachment 06 Base access EAL.pdf PDF
Attachment 04 Responsibility Questionnaire ZQEL 26-0010.docx DOCX document
ZQEL_26-0010_Combined_Synopsis_Solicitation(1).docx DOCX document
Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

OFFICE OF THE BASE CIVIL ENGINEER

Department of the Air Force Air Force Reserve Command

910th BASE CIVIL ENGINEERING OFFICE

3976 KING GRAVES ROAD, BLDG 510

VIENNA, OHIO 44473-5931

Statement of Work for

REPAIR LIVE FIRE TRAINING FACILITY

AIRCRAFT MOCK-UP, 6006

ZQEL 26-0010

SECTION DESCRIPTION PAGE NO

1. TITLE SHEET

2. LOCATION MAP……………………………………. 2

3. SCOPE OF WORK.......................................................... 3-5

4. LISTING OF WORK........................................................ 6-12

5. AS BUILT DRAWINGS.................................................. 13-19

BU

IL

D

IN

G . 5

BA

SE

C

IV

IL

E N

G

IN

EE

R

FI

R

E

TR

AI

N

IN

G

BU

IL

D

IN

G . 5

BA

SE

C

O N

TR

AC

TI

N

G O

FF

IC

E

M

AI

N G

AT

E

B2

B42

B30

B20

TOWER

CONTROL

TRAFFIC

FAA AIR

TANKS

POL

F90 30 B1

B54

B54

B40

B40

B41

B30

B51

B5

TEST PAD

ENGIN

E

B4

B40

B5

B5

B51

B40

B5

B50

B51

B51

B50

B50 2B50

B4

B40

B41

B1

B12

TANK

WATER

B1

B21

B30

B30

B53

B1

B1

B10

B10

B10

B1

B20

B2

B30

B30

B53

B3

B31

B51

B53

B52

TR

UCK

SC

AL

E

B53

B29

B50

B2

P14

B30

EYEWASH

B4

TARGET

RANGE

B53

B53

C

LA

SS

A

F

EN

C E

IN

ST

AL

LE

D

' I N

SI

D

E G

O V'

T.

P

R O

PE

R

TY

L

IN

E

B53

B53

B20

B52

F90

F20

B5

B1

F60

B53

F-90

FF=1200.92

MARINE ROAD

HESCO BARRIER

PERIM

ITER

Marine Road

400 AMP

50 AMP SERVICE

(TYP. A

T SPURS 1-5)

EXIST

ING

2'x3

' HANDHOLD

2'x3

' HANDHOLD

2'x3

' HANDHOLD

400 AMP

DUMP STATION

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

E

8" WATERLINE

8" W

AT

ER

LIN

E

8" W

ATERLINE

0+00.00 0+00.00 0+00.00 0+00.00 0+00.00

0+

1+00

1+50

2+00

2+50

3+00

3+50

4+00

4+50

0+

Asphalt Pavement

Run nin g T rac k

ASPHLA

T DRIVEWAY

AS

PH

LA

T

SP

U

IR

(T

YP

AS

PH

LA

T

SP

UI

R (T

YP

E

E

E

E E

E

E

E

Ex . 3

8' o f 1

2" H

DP @

0.97%

GRASS SW

ALE

GRASS SWALE

GRASS SWALE

GRASS SW

ALE

(2)6" PVC

6"

PV

C

98.0' OF 8" PVC(SDR 35) @ 0.50%

300' OF 8" PVC(SDR 35) @ 0.40%

304' OF 8" PVC(SDR 35) @ 0.50%

INV (8

")in

: 1

192.86 N

WOODED AREA

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text

FIRE TRAINING FACILITY

AutoCAD SHX Text

POND

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text X

AutoCAD SHX Text

SIGN

AutoCAD SHX Text

BUILDING NORTH

AutoCAD SHX Text

TRUE NORTH

AutoCAD SHX Text W.V.

AutoCAD SHX Text F.H.

AutoCAD SHX Text 1199.25

AutoCAD SHX Text Exist. 8" San. Sewer

AutoCAD SHX Text

CAMP ROAD

AutoCAD SHX Text Proposed 6" Polyethylene Gas

AutoCAD SHX Text Ex. 270' of 8" PVC(SDR35) @ 1.00%%%

AutoCAD SHX Text Ex. 330' of 8" PVC(SDR35) @ 0.44%%%

STATEMENT OF WORK

PROJECT ZQEL 26-0010

Repair Live Fire Training Facility, Aircraft Mock-Up

1. Location: The site of work contemplated herein is at the Youngstown Air Reserve Station (YARS), 910th Airlift Wing, 3976 King Graves Road, located adjacent to The Youngstown-Warren Regional Airport, Trumbull County, Vienna, Ohio, approximately 11 miles due North of Youngstown, Ohio.

2. Scope of Work: Youngstown ARS AFTF Report:

The report documents for the inspection, evaluation, of the Aircraft Fire Training Facility (AFTF), Aircraft Mock-Up at YARS, was conducted in August 2025 and finalized in March/April 2026.

The objective was to assess facility condition, identify deficiencies, evaluate compliance with Air Force and NFPA standards, and estimate costs for repairs and modernization.

Facility Condition - Overall Status

• The facility is currently operational with no critical or major deficiencies identified.

• 7 moderate deficiencies identified.

• 19 non-standard/proprietary components identified. The report concludes that while the facility remains operational, deficiencies involving burner systems, corrosion, and non-standard infrastructure requires corrective action to maintain long-term reliability, safety, and compliance. Key Deficiencies Burner and Ignition Systems The primary operational issues involve several burner assemblies:

• Multiple burners require troubleshooting and repair, including:

o Tail Engine Burner o Wheel Well Burner o Flight Deck Burner o Cargo Area Burner

• Some burners could not be consistently ignited using their local ignition systems.

• One rear sprinkler head serving the cargo-fire area is malfunctioning.

• Moderate-to-severe corrosion observed beneath portions of the aircraft mock-up.

• Corrosion identified beneath flight-deck stairs and around several door assemblies.

• R2 door is warped and requires repair.

• Warping also observed near the cargo-fireplace grating.

• No functional emergency shutoff capability identified at the propane storage area.

• No solenoid valves installed in LPG distribution lines.

• Legacy pneumatic shutoff-valve deficiencies were observed.

• Control-system components require upgrades to improve compliance and reliability.

Non-Standard Components Nineteen non-standard or proprietary items were identified, including:

• No return line from the water-conservation pond to the bum area.

• No pond strainer or aeration system.

• Non-standard valve locations and configurations.

• Custom aircraft mock-up ramp design.

• Non-standard igniter cooling-jacket configurations.

• Legacy control-board arrangements.

• Modified washdown-system components.

• The report notes that although the facility remains operational, several nonstandard components and system configurations deviate from current NFPA 1402 standards and modern Air Force AFTF design requirements.

• Structural steel repairs and corrosion remediation.

• Aircraft mock-up weld and door repairs.

• Sprinkler-head replacement.

• Related maintenance and corrective actions.

Various site-specific systems differing from current Air Force AFTF standards. While many remain functional, these items do not meet current Air Force AFTF design requirements and should be addressed during modernization. Compliance Assessment The facility was evaluated against:

• USAF Technical Order 35El -2-13-1

• NFPA54

• NFPA 58

• NFPA 70

• NFPA 1003

• NFPA 1402

US ARMY CORPS

OF ENGINEERS

0 1 inch 10mm

CHECK SCALE(print may be photo-reduced)

AutoCAD SHX Text

T. MERTZ

AutoCAD SHX Text

AIRFRAME:

AutoCAD SHX Text

TOP PLAN AND NOTES

AutoCAD SHX Text 1/4 "=1'-0"

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AutoCAD SHX Text

J. URBAN

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

THICKNESS OF THE THINNER OF THE MATERIAL BEING JOINED.

AutoCAD SHX Text

SHALL BE CONTINUOUS FILLETS OF A SIZE TO EQUAL THE

AutoCAD SHX Text

WHERE WELDS ARE NOT INDICATED ON THE PLANS, JOINTS

AutoCAD SHX Text

ABLE TO AWS.

AutoCAD SHX Text

AFTER REMOVAL OF THE IMPERFECTION BY MEANS ACCEPT-

AutoCAD SHX Text

IMPERFECTIONS ARE IDENTIFIED, REPAIRS SHALL BE MADE

AutoCAD SHX Text

TESTED USING ULTRASONIC NDT METHODS TO BE SURE THAT

AutoCAD SHX Text

AND ROLLED PLATE NOSE AND TAIL SECTIONS SHALL BE

AutoCAD SHX Text

WELDS AT THE JUNCTURE OF THE CORRUGATED FUSELAGE

AutoCAD SHX Text

AWS D1.1.

AutoCAD SHX Text

FOR THE REQUIRED WELDING POSITION IN ACCORDANCE WITH

AutoCAD SHX Text

ALL WELDING SHALL BE PERFORMED BY A WELDER CERTIFIED

AutoCAD SHX Text

CORRUGATED PLATE AND FASTENERS FOR CORRUGATED

AutoCAD SHX Text

ASTM A-36 AND BE FASTENED BY WELDING OR BOLTING.

AutoCAD SHX Text

ROLLED PLATES, SHAPES AND PIPES SHALL CONFORM TO

AutoCAD SHX Text 8.

AutoCAD SHX Text 7.

AutoCAD SHX Text 6.

AutoCAD SHX Text 5.

AutoCAD SHX Text 4.

AutoCAD SHX Text 3.

AutoCAD SHX Text 2.

AutoCAD SHX Text 1.

AutoCAD SHX Text

(EXTENT OF CORRUGATED STEEL)

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 5'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 14'-0"

AutoCAD SHX Text 8 3/8 "

AutoCAD SHX Text 6 1/4 "

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text 8 3/8 "

AutoCAD SHX Text 5'-0"

AutoCAD SHX Text 5'-0"

AutoCAD SHX Text 6"

AutoCAD SHX Text 10.

AutoCAD SHX Text 11.

AutoCAD SHX Text

ALL BOLTS FOR A-36 MATERIALS SHALL BE A.S.T.M. A-325 BOLTS

AutoCAD SHX Text

NO IMPERFECTIONS ARE PRESENT IN THE WELDS. IF

AutoCAD SHX Text 9.

AutoCAD SHX Text

%%UTYPICAL NOTES FOR DRAWINGS AS-1 THRU AS-7

AutoCAD SHX Text 12.

AutoCAD SHX Text

SEE SHEET REF. NO. S-1 FOR GENERAL NOTES.

AutoCAD SHX Text

ALL STRUCTURAL STEEL LOCATED BELOW T/WATER ELEVATION IN

AutoCAD SHX Text

BURN PIT SHALL BE PAINTED W/A BITUMINUS COATING.

AutoCAD SHX Text N

AutoCAD SHX Text

%%UAIRCRAFT - TOP PLAN

AutoCAD SHX Text

CENTERLINE OF SUPPORT

AutoCAD SHX Text

CENTERLINE OF SUPPORT

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

WELDING RING

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

WELDING RING

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

SIM. W/O

AutoCAD SHX Text

ENGINE

AutoCAD SHX Text

SIM. W/O

AutoCAD SHX Text

ENGINE

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

CENTERLINE OF

AutoCAD SHX Text

ENGINE AND

AutoCAD SHX Text

SUPPORT

AutoCAD SHX Text

CENTERLINE OF

AutoCAD SHX Text

ENGINE AND

AutoCAD SHX Text

SUPPORT

AutoCAD SHX Text

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text 13.

AutoCAD SHX Text

SCALE: 1/4 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8'

AutoCAD SHX Text

THE ENGINE PENETRATIONS/SUPPORTS SHALL BE SEALED

AutoCAD SHX Text

WATERTIGHT TO PREVENT LEAKAGE OF WATER BEFORE THE

AutoCAD SHX Text

DAM RESERVOIR IS FILLED.

AutoCAD SHX Text

DESIGN LIVE LOADS FOR THE AIRCRAFT ARE AS FOLLOWS:

AutoCAD SHX Text

CARGO DECK.................50 PSF

AutoCAD SHX Text

FLIGHT DECK.................50 PSF

AutoCAD SHX Text

WINGS............................30 PSF

AutoCAD SHX Text

TAIL...............................30 PSF

AutoCAD SHX Text

SERVICE TEMPERATURE OF STRUCTURAL STEEL SHALL NOT EXCEED

AutoCAD SHX Text

1,000 DEG F DURING FIRE TRAINING EXERCISE.

AutoCAD SHX Text

3/8 " THK. PLATE OVER WING AREAS, FUSELAGE TAIL, FUSELAGE

AutoCAD SHX Text

NOSE AND FRAMED TAIL SHALL BE SUPPLIED IN MINIMUM 24"

AutoCAD SHX Text

WIDE SHEETS. WHERE PLATE IS SUPPORTED BY INTERMEDIATE FRAMING

AutoCAD SHX Text

MEMBERS, PLATE SHALL BE OF SUFFICIENT LENGTH FOR 3-SPANS OR

AutoCAD SHX Text

MORE INSTALLATION.

AutoCAD SHX Text

UNLESS SPECIFICALLY NOTED AS STAINLESS STEEL (SS) BOLTS.

AutoCAD SHX Text

STAINLESS STEEL BOLTS SHALL CONFORM TO A.S.T.M. F593 WITH

AutoCAD SHX Text MINIMUM YIELD STRENGTH OF 45ksi AND MINIMUM TENSILE STRENGTH

AutoCAD SHX Text OF 85ksi ALL BOLTS SHALL BE TIGHTENED BY TURN-OF-NUT METHOD

AutoCAD SHX Text

AS SPECIFIED BY AISC'S MANUAL OF STEEL CONSTRUCTION UNLESS

AutoCAD SHX Text

OTHERWISE INDICATED ON THE PLANS.

AutoCAD SHX Text

PLATE FOR FUSELAGE SHALL CONFORM TO AASHTO M 167,

AutoCAD SHX Text THICKNESS= 0.28". CORRUGATIONS SHALL BE 6"x2 1/4 " FASTENERS.

AutoCAD SHX Text

AND SPLICES FOR CORRUGATED PLATE SHALL BE DESIGNED AND

AutoCAD SHX Text

FURNISHED BY THE CORRUGATED PLATE SUPPLIER.

AutoCAD SHX Text 13'-0"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 9'-3"

AutoCAD SHX Text 2'-0" x 2'-0"

AutoCAD SHX Text

CUT-OUT, TYPICAL

AutoCAD SHX Text 12'-0"

AutoCAD SHX Text 75'-0"

AutoCAD SHX Text 15'-6"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 15'-0"

AutoCAD SHX Text 10'-9"

AutoCAD SHX Text 12'-0"

AutoCAD SHX Text 12'-6"

AutoCAD SHX Text 11'-6"

AutoCAD SHX Text 20'-3"

AutoCAD SHX Text 12'-6"

AutoCAD SHX Text 72'-0"

AutoCAD SHX Text 12'-0"

AutoCAD SHX Text 48'-0"

AutoCAD SHX Text 12'-0"

AutoCAD SHX Text 12'-0"

AutoCAD SHX Text 15'-6"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 11'-6"

AutoCAD SHX Text 15'-9"

AutoCAD SHX Text 14'-0"

AutoCAD SHX Text

SCALE: N.T.S.

AutoCAD SHX Text ALL BAR GRATING SHALL BE WELDED STEEL WITH 2 1/2 "x 3/16 "

AutoCAD SHX Text

BEARING BARS @ 1 3/16 " O/C AND CROSS BARS @ 4" O/C..ATTACH

AutoCAD SHX Text

ALL GRATING TO ALL SUPPORTING MEMBERS W/ 3/8 " FILLET WELDS

AutoCAD SHX Text

X 1" LONG @ 12" O/C, MAX. EXCEPT FOR ACCESS PANEL WHICH

AutoCAD SHX Text

SHALL NOT BE WELDED TO SUPPORTING MEMBERS. SEE CARGO

AutoCAD SHX Text

DECK FRAMING PLAN ON SHEET REF. NO. AS-4 FOR ACCESS PANEL

AutoCAD SHX Text

SIZE AND LOCATION.

AutoCAD SHX Text

AutoCAD SHX Text

U.S.ARMY ENGINEER DISTRICT

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

LOUISVILLE,KENTUCKY

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text Designed by:

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Date:

AutoCAD SHX Text Drawing

AutoCAD SHX Text Code:

AutoCAD SHX Text Sheet

AutoCAD SHX Text reference

AutoCAD SHX Text number:

AutoCAD SHX Text Sheet

AutoCAD SHX Text of

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text Architects Engineers Project Managers

AutoCAD SHX Text Giffels Consultants Inc.

AutoCAD SHX Text Southfield, Michigan 48034-6176

AutoCAD SHX Text 26200 American Drive Suite 300

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

U.S. ARMY

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text 10-6-96

AutoCAD SHX Text

D. GIFFELS

AutoCAD SHX Text

PDC ZQEL 99-9004 FY97

AutoCAD SHX Text

FIRE TRAINING FACILITY

AutoCAD SHX Text

YOUNGSTOWN ARS, OH

AutoCAD SHX Text F-179-90-

AutoCAD SHX Text

RECORD DRAWING "AS-BUILT"

AutoCAD SHX Text

%%UKEY NOTES FOR AIRCRAFT REPAIR:

AutoCAD SHX Text

1. TAIL ENGINE BURNER TO BE REPAIRED/REPLACED. REFER TAIL ENGINE BURNER TO BE REPAIRED/REPLACED. REFER TO SECTION 6.1.3 OF REPORT. 2. WHEEL WELL BURNER / IGNITOR HAS BEEN REPAIRED, WHEEL WELL BURNER / IGNITOR HAS BEEN REPAIRED, PLEASE SERVICE TO ENSURE PROPER WORKING ORDER. REFER TO SECTION 6.4 OF REPORT. 3. FLIGHT DECK BURNER / IGNITOR TO BE REPAIRED, FLIGHT DECK BURNER / IGNITOR TO BE REPAIRED, POSSIBLE GROUND WIRE ISSUES. REFER TO SECTION 6.7 OF REPORT. 4. CARGO AREA BURNER / IGNITOR TO BE CARGO AREA BURNER / IGNITOR TO BE REPAIRED/REPLACED. REFER TO SECTION 6.10 OF REPORT. 5. CARGO AREA SPRINKLER TO BE REPLACED. ENSURE FULL CARGO AREA SPRINKLER TO BE REPLACED. ENSURE FULL FIRE TRAINING FUNCTIONALITY IS RESTORED. REFER TO SECTION 6.11 OF REPORT. 6. MODERATE TO SERVE CORROSION BENEATH PORTIONS OF MODERATE TO SERVE CORROSION BENEATH PORTIONS OF THE AIRCRAFT MOCK-UP. CORROSION BENEATH FLIGHT DECK STAIRS AND AROUND DOOR ASSEMBLIES TO BE REPAIRED, WELDED. REFER TO SECTION 6.5 OF REPORT. 7. R-2 DOOR IS WARPED, TO BE REPAIRED/REPLACED. R-2 DOOR IS WARPED, TO BE REPAIRED/REPLACED. REPLACE ALL GRATING THAT HAS BEEN WARPED. REFER TO SECITON 6.15 OF REPORT. 8. INSTALL ENERGY SHUTOFF AT PROPANE STORAGE AREA. INSTALL ENERGY SHUTOFF AT PROPANE STORAGE AREA. 9. INSTALL SOLENOID VALVE @ LPG PROPANE STORAGE TANK INSTALL SOLENOID VALVE @ LPG PROPANE STORAGE TANK AREA.

AutoCAD SHX Text

TAIL SECTION BURNER

AutoCAD SHX Text

AutoCAD SHX Text

WHEEL WELL BURNER

AutoCAD SHX Text

AutoCAD SHX Text

FLIGHT DECK BURNER

AutoCAD SHX Text

AutoCAD SHX Text

CARGO AREA BURNER

AutoCAD SHX Text

AutoCAD SHX Text

CARGO AREA SPRINKLER

AutoCAD SHX Text

AutoCAD SHX Text

R-2 DOOR

AutoCAD SHX Text

AutoCAD SHX Text

CORROSION BENEATH

0 1 inch 10mm

CHECK SCALE(print may be photo-reduced)

AutoCAD SHX Text

T. MERTZ

AutoCAD SHX Text

AIRFRAME:

AutoCAD SHX Text

ELEVATIONS AND DETAILS

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

J. URBAN

AutoCAD SHX Text

FRAME

AutoCAD SHX Text

ROLLED ANGLE

AutoCAD SHX Text

HASP

AutoCAD SHX Text

PANEL

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

26 GAUGE

AutoCAD SHX Text 2'-8"

AutoCAD SHX Text

VENT SLOT

AutoCAD SHX Text

TYP

AutoCAD SHX Text W8X24

AutoCAD SHX Text

HASP (TYP)

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 1'-4"

AutoCAD SHX Text 1'-4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

CORRUGATED STEEL

AutoCAD SHX Text

ENGINE

AutoCAD SHX Text

ENGINE

AutoCAD SHX Text

CREW DOOR

AutoCAD SHX Text

WHEEL WELL

AutoCAD SHX Text

WING SUPPORTS NOT SHOWN

AutoCAD SHX Text

FOR CLARITY

AutoCAD SHX Text

WHEEL WELL

AutoCAD SHX Text 15'-6"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text 20'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text

WHEEL WELL

AutoCAD SHX Text

TROOPS DOOR

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

'SIM'

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

(GRAVEL)

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

FIN. GRADE

AutoCAD SHX Text

(GRAVEL)

AutoCAD SHX Text

TYP

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text L 2"X2"X 1/4 "

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6'

AutoCAD SHX Text

SCALE: 3/8 "=1'-0"

AutoCAD SHX Text

SCALE: 1/4 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8'

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

%%U SECTION @ SEAT

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

%%U SECTION @ SEAT

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

BAR GRATING

AutoCAD SHX Text

TYP

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text

%%U SECTION @ SEAT

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

%%UFRONT ELEVATION

AutoCAD SHX Text

%%USIDE ELEVATION

AutoCAD SHX Text

HINGE, TYP

AutoCAD SHX Text

%%UAIRCRAFT - FRONT ELEVATION

AutoCAD SHX Text

%%UAIRCRAFT - LEFT SIDE ELEVATION

AutoCAD SHX Text

PLATE TO FLG

AutoCAD SHX Text

WHEEL PLATE TO

AutoCAD SHX Text

W8- 3 SIDES (TYP)

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

OPP HAND

AutoCAD SHX Text

WINDOW

AutoCAD SHX Text

CUT-OUT (TYP)

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

EXPANSION JOINT

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

CUT-OUT

AutoCAD SHX Text

PANEL

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

CONTROL PANEL

AutoCAD SHX Text

NOTE

AutoCAD SHX Text

CENTER

AutoCAD SHX Text

LINE

AutoCAD SHX Text

SYMMETRICAL ABOUT

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

%%USECTION

AutoCAD SHX Text 2'-5"

AutoCAD SHX Text

%%UPLAN @ CONTROL PANEL

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 3'-9 1/2 "

AutoCAD SHX Text

CONTROL PANEL

AutoCAD SHX Text

FLT. DECK

AutoCAD SHX Text 2'-5"

AutoCAD SHX Text 1/2 "

AutoCAD SHX Text 4 1/2 "

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

CONTROL PANEL

AutoCAD SHX Text

FLT. DECK

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

%%UELEVATION

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

OF PIPE BURNER

AutoCAD SHX Text

CENTER LINE

AutoCAD SHX Text 10"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

EXTEND TO

AutoCAD SHX Text

NOSE CONE

AutoCAD SHX Text

FOR PIPE

AutoCAD SHX Text 1'-5"

AutoCAD SHX Text 1'-2"

AutoCAD SHX Text 3'-5"

AutoCAD SHX Text 10"

AutoCAD SHX Text

CENTER

AutoCAD SHX Text

LINE

AutoCAD SHX Text

NOTE

AutoCAD SHX Text

SYMMETRICAL ABOUT

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text

BAR GRATING

AutoCAD SHX Text

BAR GRATING

AutoCAD SHX Text 3'-3"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 6"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 8"

AutoCAD SHX Text 4"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 4"

AutoCAD SHX Text 10"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text

3/8 " SHIELD PL. @ CENTER OF SEATING /

AutoCAD SHX Text

COPE TO CLEAR CHAIR BACK RETURN @ TOP

AutoCAD SHX Text

WELD

AutoCAD SHX Text

BAR GRATING

AutoCAD SHX Text

2- 2"X2"X 3/8 " X 8" LONG L

AutoCAD SHX Text

WELD TO SHIELD & BACK

AutoCAD SHX Text

OF SEAT (BEYOND)

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

%%USECTION @ SHIELDING

AutoCAD SHX Text

%%UPLAN @ SHIELDING

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text 8"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 9"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 9"

AutoCAD SHX Text

CORRUGATED SHELL

AutoCAD SHX Text

SEATING

AutoCAD SHX Text

3"X3"X 3/8 "X3" LONG CLIP L WELD TO

AutoCAD SHX Text

CONTROL PANEL OR BAR GRATING

AutoCAD SHX Text

W/ 3/8 " BOLT TO SHIELD (TYP. 3)

AutoCAD SHX Text

WELD

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text

EDGE OF BAR GRATING

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text F

AutoCAD SHX Text

WELD

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text 3"X3"X 3/8 "X3"

AutoCAD SHX Text

LONG CLIP L WELD

AutoCAD SHX Text

TO NOSE CONE W/ 3/8 " BOLT

AutoCAD SHX Text

TO SHIELD (TYP-2)

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text 6"

AutoCAD SHX Text L 3"x3"x 3/8 " X12" LONG

AutoCAD SHX Text

TACK WELD TO EA. BAR

AutoCAD SHX Text

GRATING BEARING BAR.

AutoCAD SHX Text

3/8 " THK PLATE

AutoCAD SHX Text

1" DIA HOLE

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE SHIELD W/

AutoCAD SHX Text

3/8 " BOLTS TO

AutoCAD SHX Text

CONTROL PANEL

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE SHIELD

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text

3/8 " THK PLATE

AutoCAD SHX Text 1'-2"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text

3/8 " THK PLATE

AutoCAD SHX Text

3/8 " THK PLATE

AutoCAD SHX Text

SHIELDS

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

SCALE: 1/4 " = 1'-0"

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE (TYP)

AutoCAD SHX Text

3/8 " THK WHEEL WELL

AutoCAD SHX Text

PLATE EA. SIDE OF W8.

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 2@6"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 10"

AutoCAD SHX Text

(4) 1/2 " SS BOLTS

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE (TYP)

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text

(2) 12" DIA X

AutoCAD SHX Text

3/8 " PLATE WHEELS

AutoCAD SHX Text

SCALE: 1/4 " = 1'-0"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 9'-0"

AutoCAD SHX Text 15'-6"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 1'-2"

AutoCAD SHX Text 1'-9"

AutoCAD SHX Text 8"

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text

SCALE: 3/8 "=1'-0"

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text

3/4 " GATE

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 2@6"

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

3/8 " SHIELD

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

3/8 " BENT SHIELD PLATE

AutoCAD SHX Text

VERT. 3/8 " SHIELD PLATE

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

VERTICAL 3/8 "

AutoCAD SHX Text

SHIELD PLATE, WELD TO

AutoCAD SHX Text

CORRUGATED SHELL AND

AutoCAD SHX Text

SEAT BACK

AutoCAD SHX Text

2- 2"X2"X 3/8 " X 8" LONG

AutoCAD SHX Text

WELD TO SHIELD & BACK

AutoCAD SHX Text

OF SEAT

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text L2"x2"x 3/8 "-

AutoCAD SHX Text

(TYP 4 PLACES)

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE

AutoCAD SHX Text 3/16 "

AutoCAD SHX Text 2@8"

AutoCAD SHX Text 1"

AutoCAD SHX Text 3/16 "

AutoCAD SHX Text L 2"x2"x 3/8 "

AutoCAD SHX Text 4"

AutoCAD SHX Text 4"

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text 3"x3"x 3/8 " PLATE (TYP)

AutoCAD SHX Text

TACK WELD TO EA. BAR

AutoCAD SHX Text

GRATING BEARING BAR.

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

AutoCAD SHX Text

U.S.ARMY ENGINEER DISTRICT

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

LOUISVILLE,KENTUCKY

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text Designed by:

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Date:

AutoCAD SHX Text Drawing

AutoCAD SHX Text Code:

AutoCAD SHX Text Sheet

AutoCAD SHX Text reference

AutoCAD SHX Text number:

AutoCAD SHX Text Sheet

AutoCAD SHX Text of

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text Architects Engineers Project Managers

AutoCAD SHX Text Giffels Consultants Inc.

AutoCAD SHX Text Southfield, Michigan 48034-6176

AutoCAD SHX Text 26200 American Drive Suite 300

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

U.S. ARMY

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text 10-6-96

AutoCAD SHX Text

D. GIFFELS

AutoCAD SHX Text

PDC ZQEL 99-9004 FY97

AutoCAD SHX Text

FIRE TRAINING FACILITY

AutoCAD SHX Text

YOUNGSTOWN ARS, OH

AutoCAD SHX Text F-179-90-

AutoCAD SHX Text

INSTALLED ENGINE POD

AutoCAD SHX Text

BAFFLES

AutoCAD SHX Text

STEP ADDED

AutoCAD SHX Text

TRIMMED BOTTOM OF FLOOR SO THAT IT CAN OPEN WHEN LOW WING DISTORTS DUE TO HEAT

AutoCAD SHX Text

INSTALLED "BASE GRADE" RAMP

AutoCAD SHX Text

RECORD DRAWING "AS-BUILT"

AutoCAD SHX Text

AutoCAD SHX Text

RELOCATE CREW DR./PAK SHELDINGS

AutoCAD SHX Text 11/18/96

AutoCAD SHX Text

CJR

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

SHIELD @ TOP OF PIPE

AutoCAD SHX Text

NOT SHOWN FOR CLARITY

AutoCAD SHX Text

SEE DET. 9 THIS SHEET

AutoCAD SHX Text 45°

AutoCAD SHX Text

C OF BURNER PIPE

AutoCAD SHX Text L

AutoCAD SHX Text

AS-BUILT REVISIONS BY L.D.O.

AutoCAD SHX Text

AutoCAD SHX Text 8/20/02

AutoCAD SHX Text

SMD

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

3/8" X 15" X 12" FRONT PL.

AutoCAD SHX Text

3/8 " SHIELD PLATE

AutoCAD SHX Text

3/8" X 15" X 6" TOP PL.

AutoCAD SHX Text

WELD

AutoCAD SHX Text

C OF PIPE

AutoCAD SHX Text L

AutoCAD SHX Text 6"

AutoCAD SHX Text

SCALE: 3/8 "=1'-0"

AutoCAD SHX Text

%%U SHIELDING @ PASSENGER COMPARTMENT

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AutoCAD SHX Text

%%U @TOP OF VERTICAL PIPE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

0 1 inch 10mm

CHECK SCALE(print may be photo-reduced)

AutoCAD SHX Text

J. URBAN

AutoCAD SHX Text

T. MERTZ

AutoCAD SHX Text 1/4 "=1'-0"

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AutoCAD SHX Text

AIRFRAME: PARTIAL PLAN

AutoCAD SHX Text

AND ELEVATIONS

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 15'-6"

AutoCAD SHX Text 34'-6"

AutoCAD SHX Text W8x24

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text 16'-0"

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text 3'-6"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 11'-0"

AutoCAD SHX Text

SUPPORTS

AutoCAD SHX Text

SHOWN

AutoCAD SHX Text

WHEELS NOT

AutoCAD SHX Text

AT EDGE OF OPENING

AutoCAD SHX Text 3'-6"

AutoCAD SHX Text 2'-8"

AutoCAD SHX Text

TOP OF FINISH

AutoCAD SHX Text

ENGINE

AutoCAD SHX Text

CUT-OUT

AutoCAD SHX Text

PANEL

AutoCAD SHX Text

WHEEL WELL

AutoCAD SHX Text

WINDOW CUT-OUTS

AutoCAD SHX Text

ENGINES NOT

AutoCAD SHX Text

SHOWN FOR CLARITY

AutoCAD SHX Text 9'-0"

AutoCAD SHX Text 15'-6"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text 20'-0"

AutoCAD SHX Text 4'-8 1/2 "

AutoCAD SHX Text 9'-11 11/16 "

AutoCAD SHX Text 5'-4 5/8 "

AutoCAD SHX Text 25'-4 5/16 "

AutoCAD SHX Text

CUT-OUT

AutoCAD SHX Text

PANEL

AutoCAD SHX Text

CUT-OUT

AutoCAD SHX Text

PANEL

AutoCAD SHX Text

TROOPS DOOR

AutoCAD SHX Text

'SIM'

AutoCAD SHX Text

(TYP)

AutoCAD SHX Text W8x24

AutoCAD SHX Text 1'-7 3/8 "

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TOP OF FIN. GRADE

AutoCAD SHX Text

(GRAVEL)

AutoCAD SHX Text

TYP

AutoCAD SHX Text

GRADE (GRAVEL)

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

OPP

AutoCAD SHX Text

HAND

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

SCALE: 1/4 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8'

AutoCAD SHX Text

%%UWING FRAMING NOTES:

AutoCAD SHX Text

CONTRACTORS OPTION TO SHOP FABRICATE ENTIRE WING ASSEMBLY.

AutoCAD SHX Text

SEE SECTION 4/AS-5 FOR DETAIL OF WING ATTACHMENT TO FUSELAGE.

AutoCAD SHX Text 1.

AutoCAD SHX Text

PROVIDED OVER ENTIRE SURFACE AREA OF WING. SEE NOTES ON SHEET REF.

AutoCAD SHX Text

NO. AS-1 FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text 4.

AutoCAD SHX Text 5.

AutoCAD SHX Text 6.

AutoCAD SHX Text

SEE SHEET REF. NO. AS-1 FOR TYPICAL NOTES.

AutoCAD SHX Text

SEE SHEET REF. NO. S-1 FOR GENERAL NOTES.

AutoCAD SHX Text

%%UAIRCRAFT - RIGHT SIDE ELEVATION

AutoCAD SHX Text

%%UAIRCRAFT - REAR ELEVATION

AutoCAD SHX Text

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-7

AutoCAD SHX Text

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-7

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

EXPANSION JOINT

AutoCAD SHX Text

CENTERLINE PIPE

AutoCAD SHX Text

CENTERLINE PIPE

AutoCAD SHX Text

SUPPORTS

AutoCAD SHX Text

CENTERLINE ENGINE

AutoCAD SHX Text

(NOT SHOWN)

AutoCAD SHX Text

CENTERLINE ENGINE

AutoCAD SHX Text

(NOT SHOWN)

AutoCAD SHX Text

%%UFRAMING PLAN - RIGHT WING

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

AIRCRAFT

AutoCAD SHX Text

C9X13.4 CONT

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

AIRCRAFT

AutoCAD SHX Text V1

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-7

AutoCAD SHX Text

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-7

AutoCAD SHX Text

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-7

AutoCAD SHX Text

C9X13.4 CONT

AutoCAD SHX Text 4'-8 7/16 "

AutoCAD SHX Text

CARGO DECK

AutoCAD SHX Text

- DENOTES SPAN DIRECTION OF 3/8 " THICK STEEL PLATE TO BE

AutoCAD SHX Text

3/8 " THICK PLATE BEARING ELEVATION VARIES. SEE SECTION 4/AS-5 AND

AutoCAD SHX Text

FRONT ELEVATION ON SHEET REF. NO. AS-2.

AutoCAD SHX Text

SCALE: 1/4 " = 1'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text TS 6"x6"x 3/8 " COL

AutoCAD SHX Text TS 6"x6"x 3/8 " COL

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 2'-7 3/8 "

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 10"

AutoCAD SHX Text

SCALE: 1/4 " = 1'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 2@6"

AutoCAD SHX Text

ROLLED L 3"X3"X 3/8 "

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE (TYP)

AutoCAD SHX Text

@ 10'-0" O.C. TYP

AutoCAD SHX Text

SCALE: 1/4 " = 1'-0"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 10"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text

PLATE (TYP)

AutoCAD SHX Text

AutoCAD SHX Text

U.S.ARMY ENGINEER DISTRICT

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

LOUISVILLE,KENTUCKY

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text Designed by:

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Date:

AutoCAD SHX Text Drawing

AutoCAD SHX Text Code:

AutoCAD SHX Text Sheet

AutoCAD SHX Text reference

AutoCAD SHX Text number:

AutoCAD SHX Text Sheet

AutoCAD SHX Text of

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text Architects Engineers Project Managers

AutoCAD SHX Text Giffels Consultants Inc.

AutoCAD SHX Text Southfield, Michigan 48034-6176

AutoCAD SHX Text 26200 American Drive Suite 300

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

U.S. ARMY

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text 10-6-96

AutoCAD SHX Text

D. GIFFELS

AutoCAD SHX Text

PDC ZQEL 99-9004 FY97

AutoCAD SHX Text

FIRE TRAINING FACILITY

AutoCAD SHX Text

YOUNGSTOWN ARS, OH

AutoCAD SHX Text F-179-90-

AutoCAD SHX Text

RECORD DRAWING "AS-BUILT"

AutoCAD SHX Text

AutoCAD SHX Text

AS-BUILT REVISIONS BY L.D.O.

AutoCAD SHX Text 8/9/02

AutoCAD SHX Text

SMD

AutoCAD SHX Text

PROVIDE AND INSTALL STEP SO THAT

AutoCAD SHX Text

TRAINEES COULD ENTER MOCK-UP

AutoCAD SHX Text

TRAINEES COULD ENTER MOCK-UP

AutoCAD SHX Text

OVER LOW WING.

AutoCAD SHX Text

0 1 inch 10mm

CHECK SCALE(print may be photo-reduced)

AutoCAD SHX Text

J. URBAN

AutoCAD SHX Text

T. MERTZ

AutoCAD SHX Text

AIRFRAME: SECTIONS,

AutoCAD SHX Text

VIEWS AND DETAILS

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text W8X18

AutoCAD SHX Text W8X18

AutoCAD SHX Text 2'-8"

AutoCAD SHX Text

II

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text

II

AutoCAD SHX Text 30^0'

AutoCAD SHX Text 24^

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

JOINT

AutoCAD SHX Text

EXP.

AutoCAD SHX Text

(FINGER TIGHT)

AutoCAD SHX Text 4"

AutoCAD SHX Text

TYP

AutoCAD SHX Text

II

AutoCAD SHX Text W8X24

AutoCAD SHX Text 73^39'

AutoCAD SHX Text

EACH END

AutoCAD SHX Text 28^

AutoCAD SHX Text 11^

AutoCAD SHX Text

II

AutoCAD SHX Text

II

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text W8X18

AutoCAD SHX Text W12X53

AutoCAD SHX Text

SEATING

AutoCAD SHX Text

SEE DETAIL

AutoCAD SHX Text

SEE DETAIL

AutoCAD SHX Text

CORRUGATED SECTION

AutoCAD SHX Text

SECTIONS FOR VARYING

AutoCAD SHX Text

WIDTHS WHICH FUNCTION

AutoCAD SHX Text

AS BULKHEADS.

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text C9x13.4

AutoCAD SHX Text C9x13.4

AutoCAD SHX Text 6"

AutoCAD SHX Text C9x13.4

AutoCAD SHX Text C9x13.4

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

BEYOND

AutoCAD SHX Text

FLIGHT DECK

AutoCAD SHX Text

TOP OF

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

CUT-OUT

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

VENT

AutoCAD SHX Text

CUT-OUT

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text

CARGO DECK

AutoCAD SHX Text W8X18

AutoCAD SHX Text

26 GAUGE ALUMINUM

AutoCAD SHX Text

BULKHEAD

AutoCAD SHX Text 13'-0"

AutoCAD SHX Text

FLIGHT DECK

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text W12X53

AutoCAD SHX Text 12'-6"

AutoCAD SHX Text 24'-0"

AutoCAD SHX Text 24'-0"

AutoCAD SHX Text 11'-6"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text

CUT-OUT PANELS

AutoCAD SHX Text W12X53

AutoCAD SHX Text 3'-11"

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text

RIGHT WING

AutoCAD SHX Text

LEFT WING

AutoCAD SHX Text C9X13.4

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 12'-4 5/8 "

AutoCAD SHX Text 1'-9 3/16 "

AutoCAD SHX Text 1'-9 3/16 "

AutoCAD SHX Text 8'-5 5/8 "

AutoCAD SHX Text 6'-7 7/8 "

AutoCAD SHX Text 6'-5 5/8 "

AutoCAD SHX Text 1'-9 3/16 "

AutoCAD SHX Text 3'-9"

AutoCAD SHX Text 4'-3"

AutoCAD SHX Text 2'-6"

AutoCAD SHX Text

CARGO DECK

AutoCAD SHX Text 5'-9 5/16 "

AutoCAD SHX Text

TROOPS DOOR

AutoCAD SHX Text W8X18

AutoCAD SHX Text W8X18

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

(GRAVEL)

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

(EARTH)

AutoCAD SHX Text E.T.F.

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

(GRAVEL)

AutoCAD SHX Text

END C9

AutoCAD SHX Text C9

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

(GRAVEL)

AutoCAD SHX Text

STIFF (N.S.&F.S.)

AutoCAD SHX Text

STIFF (N.S.&F.S.)

AutoCAD SHX Text W12X53

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

- SEE SECTION 2/AS7 FOR

AutoCAD SHX Text

TYPICAL STRUCTURAL INFO.

AutoCAD SHX Text

NOT SHOWN.

AutoCAD SHX Text

'SIM.'

AutoCAD SHX Text

CARGO DECK FRAMING

AutoCAD SHX Text

NOT SHOWN

AutoCAD SHX Text

T/BAR GRATING

AutoCAD SHX Text

CARGE DECK FRAMING AND

AutoCAD SHX Text

BAR GRATING NOT SHOWN

AutoCAD SHX Text

FOR CLARITY.

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

WHEEL WELLS NOT

AutoCAD SHX Text

SHOWN FOR CLARITY.

AutoCAD SHX Text

SEE SECTION 2/AS7 FOR TYPICAL

AutoCAD SHX Text

STRUCT. INFO. NOT SHOWN.

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

SCALE: 1/4 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8'

AutoCAD SHX Text

SCALE: 1/2 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4'

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 2'

AutoCAD SHX Text

SCALE: 1 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1 1/2 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text 18"

AutoCAD SHX Text

%%U VIEW AT WING ATTACHMENT

AutoCAD SHX Text V1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-3

AutoCAD SHX Text

AS-4

AutoCAD SHX Text

CENTERLINE FUSELAGE

AutoCAD SHX Text

RADIUS TYP

AutoCAD SHX Text 3"

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text

(TYP)

AutoCAD SHX Text F

AutoCAD SHX Text

T/BENT PLATE & STIFF. PLATE

AutoCAD SHX Text

T/CORRUGATED FUSELAGE PLATE

AutoCAD SHX Text L 3"x3"x 3/8 " FS

AutoCAD SHX Text

TYP AT

AutoCAD SHX Text

STIFF

AutoCAD SHX Text

PLATE

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text F

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text A

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

CORRUGATED

AutoCAD SHX Text

SECTION

AutoCAD SHX Text A

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-4

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

%%U WELDING RING DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

SEE SECTION

AutoCAD SHX Text

AT WELDING

AutoCAD SHX Text

RING

AutoCAD SHX Text B

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-4

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

%%U DETAIL AT EXP. JOINT COVER

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

EXP. JT.

AutoCAD SHX Text

%%U TYPICAL SECTION AT WELDING RING

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text 2.28"

AutoCAD SHX Text WELDING RING 1/2 "x2 1/4 "

AutoCAD SHX Text 12'-5 3/8 " O/O

AutoCAD SHX Text 12'-4 5/8 "O.D.

AutoCAD SHX Text F

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

SEE PLAN

AutoCAD SHX Text 10"

AutoCAD SHX Text

BOTTOM

AutoCAD SHX Text

CORRUGATED

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

CENTERLINE W12 (HI AND LO)

AutoCAD SHX Text

LEFT

AutoCAD SHX Text

WING

AutoCAD SHX Text

RISER PLATE

AutoCAD SHX Text

%%UNOTE:

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text A

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text C

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

(AT FIXED JOINTS - 4 THUS)

AutoCAD SHX Text

%%U DETAIL - TYP. COLUMN STIFFENER

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-4

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

STIFFENER, TYP AT

AutoCAD SHX Text

ALL OPENINGS

AutoCAD SHX Text F

AutoCAD SHX Text

EXPANSION JOINT

AutoCAD SHX Text B

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-6

AutoCAD SHX Text C

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

NOSE WHEEL

AutoCAD SHX Text

AND GEAR

AutoCAD SHX Text A

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AS-2

AutoCAD SHX Text

CARGO BOX

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text

SCALE: 1/2 "=1'-0"

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text

4 1/2 " (TYP)

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text

3/4 " DIA BOLTS

AutoCAD SHX Text

(TYP WHERE SHOWN)

AutoCAD SHX Text L 3"X3"X 3/8 "

AutoCAD SHX Text

SPRINKLER SUPPORT

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text

1/2 " PLATE TYP

AutoCAD SHX Text 3/8 "

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

1/2 " PLATE

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 3/8 "

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

1/2 " STIFF PLATE

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

1/2 " PLATE

AutoCAD SHX Text 3"

AutoCAD SHX Text

1/2 " BENT

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text

AT 6'-2 3/8 "

AutoCAD SHX Text

1/2 " BENT PLATE

AutoCAD SHX Text 6"

AutoCAD SHX Text

(2) 3/4 " BOLTS

AutoCAD SHX Text

SCALE: 1/2 "=1'-0"

AutoCAD SHX Text

%%U SECTION

AutoCAD SHX Text

1" THK

AutoCAD SHX Text

SHEAR PLATE

AutoCAD SHX Text 1 1/2 "

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text PLATE x CONT'.

AutoCAD SHX Text

1/2 " THK BENT

AutoCAD SHX Text

PLATE BEYOND

AutoCAD SHX Text 9 3/8 "

AutoCAD SHX Text

1/2 " THK

AutoCAD SHX Text

STIFF. PLATE

AutoCAD SHX Text (N.S. & F.S.)

AutoCAD SHX Text R= 6'-0"

AutoCAD SHX Text

1/2 " THK

AutoCAD SHX Text

STIFF. PLATE

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text 3"

AutoCAD SHX Text

3/8 " THK

AutoCAD SHX Text PLATEx12"

AutoCAD SHX Text

WIDE

AutoCAD SHX Text

CENTERLINE- 3/4 "

AutoCAD SHX Text

DIA BOLTS

AutoCAD SHX Text

SCALE: 1/2 "=1'-0"

AutoCAD SHX Text

%%U SECTION

AutoCAD SHX Text

1/2 " PLATE

AutoCAD SHX Text

1" DIA DRAIN HOLE @ EA. FLUTE

AutoCAD SHX Text

TYPICAL FULL LENGTH OF CORRUGATED

AutoCAD SHX Text

SECTION.

AutoCAD SHX Text

1/2 " PLATE

AutoCAD SHX Text

BULKHEAD

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text

.28" THK

AutoCAD SHX Text

CORRUGATED

AutoCAD SHX Text

STEEL

AutoCAD SHX Text

SCALE: 1/2 "=1'-0"

AutoCAD SHX Text

%%U SECTION

AutoCAD SHX Text

.28" CORRUGATED

AutoCAD SHX Text

3/8 " ROLLED PLATE

AutoCAD SHX Text t=.28"

AutoCAD SHX Text 1/2 "

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text

SCALE: 1"=1'-0"

AutoCAD SHX Text 12'-4 9/16 "O.D.

AutoCAD SHX Text

12'-0" DIA

AutoCAD SHX Text 2 1/4 "

AutoCAD SHX Text

MIN. SEE FUSELAGE

AutoCAD SHX Text

CENTERLINE-END OF CORRUGATED

AutoCAD SHX Text

PLATE & CENTERLINE - 3/8 "

AutoCAD SHX Text

ROLLED PLATE

AutoCAD SHX Text

SCALE: 1 1/2 "=1'-0"

AutoCAD SHX Text 5/8 "X5"

AutoCAD SHX Text

SLOT

AutoCAD SHX Text

1/2 " DIA BOLT

AutoCAD SHX Text 3/8 "x12" X CONT'.

AutoCAD SHX Text

PLATE EXP. JOINT

AutoCAD SHX Text

COVER

AutoCAD SHX Text

1" RET. EA

AutoCAD SHX Text

END

AutoCAD SHX Text

SCALE: 1"=1'-0"

AutoCAD SHX Text

1/2 " THK BULKHEAD

AutoCAD SHX Text

PLATE

AutoCAD SHX Text 2"

AutoCAD SHX Text 3"

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text 10 3/8 "

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 6"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text

3/8 " PLATE

AutoCAD SHX Text 3"X3X" 1/4 "

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text F

AutoCAD SHX Text F

AutoCAD SHX Text

2, 3/4 " BOLTS

AutoCAD SHX Text 36" W X 84" H

AutoCAD SHX Text

SCALE: 1/4 "=1'-0"

AutoCAD SHX Text

%%U SECTION

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

(2) 1/2 " PLATE

AutoCAD SHX Text

12" DIA

AutoCAD SHX Text

(1) EACH SIDE

AutoCAD SHX Text W12X53X1'-0"

AutoCAD SHX Text

W/ 1/2 " STIFF PL

AutoCAD SHX Text 4'-4"

AutoCAD SHX Text

3/8 "X4" PLATE

AutoCAD SHX Text

AT CENTERLINE

AutoCAD SHX Text

OF AIRCRAFT

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text W12x22 ATTACH TO NOSE PLATE BEYOND

AutoCAD SHX Text W/2 BENT PLATES 4"x3"x 5/16 "

AutoCAD SHX Text

WELD BENT PLATES TO NOSE W/

AutoCAD SHX Text

1/4 " FILLET WELD ALL AROUND.

AutoCAD SHX Text

3/4 " BOLTS (TYP)

AutoCAD SHX Text 9'-0"

AutoCAD SHX Text

3/4 " BOLTS (TYP)

AutoCAD SHX Text W12X53 X 2'-0"

AutoCAD SHX Text

1/2 " STIFF PLATE

AutoCAD SHX Text 3"

AutoCAD SHX Text 3"

AutoCAD SHX Text 3, 3/4 "

AutoCAD SHX Text

BOLTS

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

(2) 60 MIL HDPE

AutoCAD SHX Text

LINERS WITH

AutoCAD SHX Text

DRAINAGE NET

AutoCAD SHX Text

PROVIDE SEALS AT PIPE

AutoCAD SHX Text

COL PENETRATIONS W/LINER

AutoCAD SHX Text

EXTENDED UP W/COMPRESSION

AutoCAD SHX Text

RING AND SEALANT

AutoCAD SHX Text

SAND

AutoCAD SHX Text

AutoCAD SHX Text

U.S.ARMY ENGINEER DISTRICT

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

LOUISVILLE,KENTUCKY

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

DESCRIPTIONS

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text Designed by:

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text Scale:

AutoCAD SHX Text Date:

AutoCAD SHX Text Drawing

AutoCAD SHX Text Code:

AutoCAD SHX Text Sheet

AutoCAD SHX Text reference

AutoCAD SHX Text number:

AutoCAD SHX Text Sheet

AutoCAD SHX Text of

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text Architects Engineers Project Managers

AutoCAD SHX Text Giffels Consultants Inc.

AutoCAD SHX Text Southfield, Michigan 48034-6176

AutoCAD SHX Text 26200 American Drive Suite 300

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CORPS OF ENGINEERS

AutoCAD SHX Text

U.S. ARMY

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text 10-6-96

AutoCAD SHX Text

D. GIFFELS

AutoCAD SHX Text

PDC ZQEL 99-9004 FY97

AutoCAD SHX Text

FIRE TRAINING FACILITY

AutoCAD SHX Text

YOUNGSTOWN ARS, OH

AutoCAD SHX Text F-179-90-

AutoCAD SHX Text

RECORD DRAWING

AutoCAD SHX Text 5-28-02

RECORD DRAWING "AS-BUILT"

0 1 inch 10mm

CHECK SCALE(print may be photo-reduced)

AutoCAD SHX Text

J. URBAN

AutoCAD SHX Text

T. MERTZ

AutoCAD SHX Text

AIRFRAME: SECTIONS

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

BAR GRATING

AutoCAD SHX Text L

AutoCAD SHX Text C W8X24

AutoCAD SHX Text

II

AutoCAD SHX Text

FLOOR

AutoCAD SHX Text

TO CARGO

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 30^0'

AutoCAD SHX Text 1'-8"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 3'-6"

AutoCAD SHX Text

OUTBOARD

AutoCAD SHX Text W8X24

AutoCAD SHX Text

TYP

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text

TOP OF CARGO DECK

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

TOP OF CARGO DECK

AutoCAD SHX Text 9"

AutoCAD SHX Text 9"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

BATTERIES

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text W8X24

AutoCAD SHX Text W12X53

AutoCAD SHX Text

(OPEN RISER)

AutoCAD SHX Text

TOP OF FLIGHT DECK

AutoCAD SHX Text

BULKHEAD

AutoCAD SHX Text

BAR GRATING

AutoCAD SHX Text 8"

AutoCAD SHX Text 11"

AutoCAD SHX Text

TO STRINGER

AutoCAD SHX Text

SECURE BAR GRATING

AutoCAD SHX Text

C10X15.5 STRINGER

AutoCAD SHX Text 1'-4"

AutoCAD SHX Text 6'-8"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 1'-4"

AutoCAD SHX Text W8X24

AutoCAD SHX Text

W8X24 CONT.

AutoCAD SHX Text

REVOLVED SECTION

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text

TYP

AutoCAD SHX Text

AFT

AutoCAD SHX Text

FORWARD

AutoCAD SHX Text C9x13.4

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text

GROUT SOLID

AutoCAD SHX Text 9'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text TS6x6

AutoCAD SHX Text 5'-9 1/4 "

AutoCAD SHX Text 4'-11 13/16 "

AutoCAD SHX Text 5'-0" I.D

AutoCAD SHX Text 5'-0 3/4 " O.D.

AutoCAD SHX Text W8x15

AutoCAD SHX Text MC12x10.6

AutoCAD SHX Text W8

AutoCAD SHX Text

FIN. GRADE

AutoCAD SHX Text

(EARTH)

AutoCAD SHX Text W8

AutoCAD SHX Text

FIN. GRADE

AutoCAD SHX Text

(EARTH)

AutoCAD SHX Text

NOTE:

AutoCAD SHX Text

SEE SECTION 4/AS-7 FOR

AutoCAD SHX Text

TYPICAL STRUCTURAL INFORMATION

AutoCAD SHX Text

NOT SHOWN.

AutoCAD SHX Text C8x18.75

AutoCAD SHX Text C8x18.75

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text C10x15.3

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

ALL CORNERS

AutoCAD SHX Text W8x24

AutoCAD SHX Text

(TYP. 4 PLACES)

AutoCAD SHX Text C10

AutoCAD SHX Text C8

AutoCAD SHX Text

W8 COL.

AutoCAD SHX Text

TYP

AutoCAD SHX Text

EA. L

AutoCAD SHX Text

TYP ALL

AutoCAD SHX Text

AROUND

AutoCAD SHX Text C8

AutoCAD SHX Text C10

AutoCAD SHX Text

TYP

AutoCAD SHX Text

3 SIDES

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text W8x18

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text

GRAVEL

AutoCAD SHX Text

TYP

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6'

AutoCAD SHX Text

SCALE: 3/8 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/4 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE: 1 1/2 "=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text 18"

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text

CENTERLINE - AIRCRAFT & W8

AutoCAD SHX Text

%%U PLAN

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

%%U SECTION AT CARGO BOX

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

%%U SECTION

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 2 @ 6"

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

%%U SECTION AT BATTERY

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

%%U SECTION AT BATTERY

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

%%U SECTION AT BATTERY COMPARTMENT

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

%%U TAIL SECTION

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

AS-5

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text 11"

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text F

AutoCAD SHX Text 5/16 "

AutoCAD SHX Text

TYP. @ W24

AutoCAD SHX Text

TO BASE

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

%%U TAIL SECTION

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

T/HORIZ. PLATE

AutoCAD SHX Text

T/VERT. PLATE & COL.

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 4@12"

AutoCAD SHX Text 3/16 "

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text 2@6"

AutoCAD SHX Text 1/4 "

AutoCAD SHX Text F

AutoCAD SHX Text

%%U TAIL SECTION

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 2'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text W8X24

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

%%U SECTION THRU ENGINE

AutoCAD SHX Text

SEE PLAN

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

C9 (TYP)

AutoCAD SHX Text

AutoCAD SHX Text

AS-6

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

%%U SECTION THRU ENGINE

AutoCAD SHX Text

SEE PLAN

AutoCAD SHX Text

SEE PLAN FOR

AutoCAD SHX Text

FOOTING INFO

AutoCAD SHX Text TS6x6 (TYP)

AutoCAD SHX Text 1/4 "

AutoCAD SHX…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .