Attachment 0012- Section J Attachment Additional Solicitation and Contra....docx

Attachment 0012

ADDITIONAL SOLICITATION AND CONTRACT REQUIREMENTS

EXPLOSIVE MATERIAL HANDLING

The Contractor shall comply with the requirements of the Department of the Army Pamphlet 385-64, Safety, Ammunition and Explosives Safety Program, in effect on the date of the solicitation for this contract.

SMALL ARMS/LIGHT WEAPONS SERIALIZATION PROGRAM (SA/LWSP)

(a) Definitions. This paragraph defines specific terms utilized throughout the rest of the text and in the accompanying Contract Data Requirements List (CDRL). The Data Item Description (DID) (DI-MISC-80914B) can be found at the following website: http://quicksearch.dla.mil/. These documents aid in clarifying the SA/LWSP requirements to Government and contractor personnel.

(1) Department of Defense (DoD) SA/LW Registry. DoD central repository for small arms and light weapons (SA/LW) serial numbers. The registry serves as the single point of access for inquires relating to the last known record of SA/LW serial numbers. Serial numbers are provided by the component registries on a scheduled and as required basis.

(2) Small Arms and Light Weapons. For the purpose of small arms and light weapons reporting, small arms and light weapons are defined as man-portable weapons made or modified to military specifications for use as lethal instruments of war that expel a shot, bullet or projectile by action of an explosive. Small arms are broadly categorized as those weapons intended for use by individual members of armed or security forces. They include handguns, rifles and carbines, sub-machine guns, and light machine guns. Light weapons are broadly categorized as those weapons designed for use by two or three members of armed or security forces serving as a crew, although some may be used by a single person. They include heavy machine guns, hand-held under-barrel and mounted grenade launchers, portable anti- aircraft guns, portable anti-tank guns, recoilless rifles, man-portable launchers of missile and rocket systems, and mortars.

(3) Small Arms/Light Weapons Serial Number. The total series of characters appearing on the firing component part of a small arm or light weapons.

(4) Small Arms/Light Weapons Transaction Reporting. Reporting of individual transactions affecting the small arms or light weapons serial numbers' status within any component registry and the DoD Small Arms/Light Weapons Registry (also known as the DoD Registry).

(b) Scope. This text establishes requirements for the adherence to the Small Arms/Light Weapons Serialization Program (SA/LWSP) reporting requirements in accordance with AR 710-3 and DoD 4000.25-2-M. This text also provides basic information and instruction to the contractor on the requirements of the Small Arms/Light Weapon Serialization Program (SA/LWSP).

1. Any Small Arms weapon manufactured under contract for the US Government is considered a sensitive item and requires tracking and controlling by serial number under the Small Arms/Light Weapons Serialization Program, to include reporting in accordance with DoD 4000.25-2-M (Military Standard Transaction Reporting and Accounting Procedures). The contractor is required to submit all Small Arms/Light Weapons Serialization Program (SA/LWSP) control transactions to the DOD Central Registry for recording as part of the mandatory requirements of this contract. This reporting shall be accomplished through the use of an 80 column Weapon Serial Number (WSN) transaction on the mandatory LOGSA spreadsheet in accordance with (DID) DI-MISC-80914B, as attached in section “J” of this solicitation and/or contract.

2. In addition, on the LOGSA spreadsheet, if a contractor receives GFP, then they will fill out the Reporting DoDAAC field with a DoDAAC assigned to them from the UIT registry. If a contractor does not have GFP, then they will fill out the Reporting DoDAAC field with a "0" plus their cage code. This spreadsheet must be filled out correctly or it will be rejected from LOGSA.

3. Transactions can be submitted either by e-mail with attached flat text file to the Logistics Support Activity (LOGSA) or by direct upload into WEB UIT. NOTE: The preferred method of submission is via email to LOGSA’s mailbox.

PREFERRED METHOD OF TRANSMISSION

a. Contractors may submit an electronic copy in flat text file (.txt) format as an attachment via email to LOGSA’s mailbox: usarmy.redstone.logsa.mbx.uit@mail.mil. LOGSA will send a verification e-mail for successful uploads. Additionally, a copy of the text file will be forwarded via email to the contract specialist identified in the Issued By block on page one of the contract. Do not include any spaces in the file name or the file will be rejected.

ALTERNATIVE METHOD OF TRANSMISSION

b. Direct upload into WEB UIT: Transactions shall be submitted via the internet using Web UIT at the following website: https://weblog.logsa.army.mil/uit/

If contractor uploads the file directly in UIT, it is critical they ensure there are no rejects. The rejects will appear at the LOG IN page and correction procedures will be displayed. Contractors can verify a successful upload by querying by document number.

*For access to WEB UIT, the contractor must submit a System Access Request (SAR), available at the WEB UIT main page. Justification comments should include the following: Serialization officer responsible for the WSN transactions into WEB UIT.

c. Transactions must be submitted as each lot is accepted by DCMA and shipped.

d. A CD containing all serial numbers shall be submitted to the contract specialist of record at the completion of this contract.

e. The contractor can contact LOGSA for any assistance required (usarmy.redstone.logsa.mbx.uit@mail.mil).

4. Weapon Serial Number (WSN) transaction types for new production weapons. Refer to (DID) DI-MISC-80914B for additional details.

a. One (SA/LWSP) “P” transaction (80 record position) shall be furnished for each item shipped as new production to any DoD activity. The contractor is required to prepare three WSN control “P” transactions. One copy will provided to the UIT Central Registry (as indicated in para 2 above) and two additional copies will accompany the shipment documentation.

b. One (SA/LWSP) “F” transaction shall be furnished for each item shipped as new production for Foreign Military Sales (FMS) contracts and will be provided to the UIT Central Registry. Additional copies to accompany the shipment are not required.

c. One (SA/LWSP) “N” shall be furnished for each item shipped as new production for other government agencies or activities (non-DOD activities). This includes shipments to civilian activities and contractors. Transaction copies are not required to accompany weapon shipment.

(c) Acceptance. Contractors shall adhere to the SA/LWSP reporting requirement as a condition of Acceptance as defined in the Statement of Work or in the Inspection/Acceptance section of the contract.

ADMINISTRATIVE SPACE OCCUPIED BY CONTRACTORS AT PICATINNY ARSENAL

In the event that the Contractor, in performing the requirements in the Statement of Work (SOW) under this contract, will occupy Government owned administrative space on the U.S. Army installation, Picatinny Arsenal, NJ, the Contractor shall provide the following information:

(1) Name of Contractor

(2) Contract number (including the task order number if applicable);

(3) Start date and end date of contract

(4) Name(s) of Contractor personnel occupying administrative space at Picatinny

(5) Building number being occupied

(6) Square footage required

(7) Current use of square footage

(8) Unit Identification Code (UIC) for the contracted employees

The information shall be reported within ten (10) days of award and shall be provided in accordance with the SOW and associated Contract Requirements Data List (CDRL) (DD 1423) and submitted to the following:

Garrison Space Manager:

Army Stationing Identification Program (ASIP) Manager:

Procuring Contracting Officer (PCO): Contracting Officer’s Representative (COR):

{PCO to insert the name, office symbol and email for the above at time of award.}

RELEASE OF INFORMATION RESEARCH AND DEVELOPMENT

1. Classified Contracts - The DOD Security Agreement (DD Form 441) and DOD Contract Security Classification Specification (DD Form

254) apply.

2. Unclassified Contracts-Restricted Release - Obtain the Contracting Officer's approval before releasing information received during this contract or generated from this contract, except if a college, university or laboratory receives the award and conducts the research on campus.

3. Unclassified Contracts-Unrestricted Release - You may release information received during the contract or developed from the contract without Contracting Officer's approval if:

a. you are a college, university/laboratory; and

b. you conduct the research on campus.

But, obtain approval before releasing the information if there is a high likelihood of revealing abilities of military systems or information concerning manufacturing technologies unique and critical to defense.

NOTE: Section J provides instructions for clearing technical material for release to the public and a sample clearance form (INME-PIC-IM Form 3002).