Attachment 0005 Hardware Descriptions.docx

Technical Descriptions and Configurations Table of Contents

Description of GLOCK 17 System For the purposes of this acquisition, the GLOCK 17 with or without Night Sights is defined as follows:

One (1) GLOCK 17 pistol model G17 Three (3) magazines with 17 round capacity each (factory GLOCK only) One (1) set self-luminous front and rear night sights (standard height), installed (when requested) One (1) Set Modular Back Straps (Gen 4, 5 and 6 only) One (1) operator’s manual One (1) speed loader appropriate for G17 magazines One (1) cleaning set; includes caliber appropriate brush and cleaning rod One (1) pistol case One (1) cable lock

The GLOCK 17 is a lightweight magazine fed pistol without a compensated or ported barrel. The GLOCK 17 is equipped with the “Safe Action” System, a fully automatic safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released.

NOTE: The description includes current production Generations 3, 4, 5, and 6.

The exact version required (Generation) and sight specification (Standard or Night Sights) will be specified on an order-by-order basis. Gen 3 and Gen 4 pistols will ship with “Gen4” magazines. Gen 5 and Gen 6 pistols will ship with “Gen5” magazines.

Technical Data Caliber: 9x19mm Width (Gen 3 and Gen 4): approx. 32mm (1.26 inches) Width (Gen 5): approx. 34mm (1.34 inches) Width (Gen 6): approx. 34.4mm (1.35 inches) Height (including magazine): approx. 139mm (5.47 inches) Overall Length (Gen 3): approx. 204mm (8.03 inches) Overall Length (Gen 4, 5, and 6): approx. 202mm (7.95 inches) Barrel length: approx. 114mm (4.49 inches) Weight (with empty magazine, Gen 3 and Gen 4): approx. 705 g (24.87 ounces) Weight (with empty magazine, Gen 5): approx. 708 g (24.97 ounces) Weight (with empty magazine, Gen 6): approx. 680 g (23.99 ounces)

Characteristics Magazine capacity – 17 Rounds standard Rifling- Hexagonal profile with right-hand twist of one turn in 9.84 in. (250 mm) Uncompensated (no porting in barrel) Self-luminous night sights (when requested)

Generation 3

· Finger groove and rail frame

· Non-ambidextrous magazine catch

· Single recoil spring guide rod

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 4

· Rough textured frame

· Enlarged, reversible magazine catch

· Dual recoil spring assembly

· Modular Back Strap System

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 5

· Flared magazine well

· Glock Marksman Barrel (GMB)

· Ambidextrous Slide Stop

· No finger grooves

· nDLC finish

· Reinforced slide rails

· Front slide serrations

· Modular Back Strap System

· Nominal 26N (5.8lb) trigger pull (standard)

Generation 6

· Flared magazine well

· Ambidextrous slide stop

· RTF 6 grip texture

· nDLC finish

· Undercut trigger guard

· Palm swelled grip

· Integrated thumb shelf

· Molded integrated beavertail

· Front slide serrations

· Modular Back Strap System

· Single recoil spring guide rod

· Nominal 26N (5.8lb) trigger pull (standard)

· Optics Ready System

Description of GLOCK 19 System For the purposes of this acquisition, the GLOCK 19 with or without Night Sights is defined as follows:

One (1) GLOCK 19 pistol model G19 (Maritime Spring Cups installed if configured) Three (3) magazines with 15 round capacity each (factory GLOCK only) One (1) set self-luminous front and rear night sights (standard height), installed (when requested) One (1) Set Modular Back Straps (Gen 4, 5, and 6 only) One (1) operator’s manual One (1) speed loader appropriate for G19 magazines One (1) cleaning set; includes caliber appropriate brush and cleaning rod One (1) pistol case One (1) cable lock

The MOS configuration also includes the following:

The interchangeable optic mounting plate set includes one (1) each of the following:

The GLOCK 19 is a lightweight magazine fed pistol without a compensated or ported barrel. The GLOCK 19 is equipped with the “Safe Action” System, a fully automatic safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released.

The GLOCK 19 MOS differs from the standard configuration GLOCK 19 by the relief cut in the slide for the mounting of the various optic mounting plates. The GLOCK 19 MOS TB differs from the GLOCK 19 MOS by the barrel which is extended and threaded and includes a metal thread protective cap. The threads are typically M13.5x1LH but can be specified to be 1/2x28 on an order-by-order basis.

The G19 Gen4 MOS with Night Sights may also be ordered with optional Maritime Spring Cup substitution for standard firing pin spring cup. This will be specified at the time of order.

NOTE: The description includes current production Generations 3, 4, 5, and 6. The exact version required (Generation), and sight specification (Standard or Night Sights) will be specified on an order-by-order basis.

Technical Data

· Caliber: 9x19mm

· Width (Gen 3 and Gen 4): approx. 32mm (1.26 inches)

· Width (Gen 5): approx. 34mm (1.34 inches)

· Width (Gen 6): approx. 34.4mm (1.35 inches)

· Height (including magazine): approx. 128mm (5.04 inches)

· Overall Length (Gen 3): approx. 187mm (7.36 inches)

· Overall Length (Gen 4, 5, and 6): approx. 185mm (7.28 inches)

· Barrel length: approx. 102mm (4.02 inches)

· Weight (with empty magazine): approx. 670 g (23.63 ounces)

· Weight (with empty magazine, Gen 6): approx. 640 g (22.58 ounces)

Characteristics Magazine capacity – 15 Rounds standard Rifling- Hexagonal profile with right-hand twist of one turn in 9.84 in. (250 mm) Uncompensated (no porting in barrel) Self-luminous night sights (when requested) Maritime Spring Cups (when requested)

Generation 3

· Finger groove and rail frame

· Non-ambidextrous magazine catch

· Single recoil spring guide rod

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 4

· Rough textured frame

· Enlarged, reversible magazine catch

· Dual recoil spring assembly

· Modular Back Strap System

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 5

· Flared magazine well

· Glock Marksman Barrel (GMB)

· Ambidextrous Slide Stop

· No finger grooves

· nDLC finish

· Reinforced slide rails

· Front slide serrations

· Modular Back Strap System

· Nominal 26N (5.8lb) trigger pull (standard)

Generation 6

· Flared magazine well

· Ambidextrous slide stop

· RTF 6 grip texture

· nDLC finish

· Undercut trigger guard

· Palm swelled grip

· Integrated thumb shelf

· Molded integrated beavertail

· Front slide serrations

· Modular Back Strap System

· Single recoil spring guide rod

· Nominal 26N (5.8lb) trigger pull (standard)

· Optics Ready System

Description of GLOCK 26 System For the purposes of this acquisition, the GLOCK 26 with or without Night Sights is defined as follows:

One (1) GLOCK 26 pistol model G26 Three (3) magazines with 10 round capacity each (factory GLOCK only) One (1) set self-luminous front and rear night sights (standard height), installed (when requested) One (1) Set Modular Back Straps (Gen4 and Gen5 only) One (1) operator’s manual One (1) speed loader appropriate for G26 magazines One (1) cleaning set; includes caliber appropriate brush and cleaning rod One (1) pistol case One (1) cable lock

The GLOCK 26 is a lightweight magazine fed pistol without a compensated or ported barrel. The GLOCK 26 is equipped with the “Safe Action” System, a fully automatic safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released.

The G26 Gen4 with Night Sights may also be ordered with optional Maritime Spring Cup substitution for standard firing pin spring cup. This will be specified at the time of order.

NOTE: The description includes all current production Generations 3, 4, and 5.

The exact version required (Generation), sight specification (Standard or Night Sights), and additional configurations options (as below) will be specified on an order-by-order basis.

Technical Data Caliber: 9x19mm Width (Gen3 and Gen4): approx. 32mm (1.26 inches) Width (Gen5): approx. 33mm (1.30 inches) Height (including magazine): approx. 106mm (4.17 inches) Overall Length (Gen3): approx. 165mm (6.50 inches) Overall Length (Gen4 and Gen5): approx. 163mm (6.42 inches) Barrel length: approx. 87mm (3.43 inches) Weight (with empty magazine, Gen3 and Gen4): approx. 610 g (21.52 ounces) Weight (with empty magazine, Gen5): approx. 615 g (21.69 ounces)

Characteristics:

Magazine capacity – 10 Rounds standard.

Rifling- Hexagonal profile with right-hand twist of one turn in 9.84 in. (250 mm) Uncompensated (no porting in barrel) Self-luminous night sights (when requested) Maritime Spring Cups (when requested on G26 Gen4 with Night Sights)

Generation 3

· Finger groove

· Non-ambidextrous magazine catch

· Single recoil spring guide rod (except G26 which uses dual recoil spring)

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 4

· Rough textured frame

· Enlarged, reversible magazine catch

· Dual recoil spring assembly

· Modular Back Strap System

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 5

· Flared magazine well

· Glock Marksman Barrel (GMB)

· Ambidextrous Slide Stop

· No finger grooves

· nDLC finish

· Reinforced slide rails

· Front slide serrations

· Modular Back Strap System

Description of GLOCK 19X System For the purposes of this acquisition, the GLOCK 19X system is defined as follows:

One (1) GLOCK 19X pistol One (1) set self-luminous front and rear night sights (standard height), installed when requested One (1) 17-round magazine, coyote in color Two (2) Extended 17+2 – round magazines, coyote in color One (1) Modular Backstrap Set (described below) One (1) Bore brush One (1) Polymer cleaning rod One (1) Cable Gun lock One (1) Magazine speed loader One (1) Instruction Manual in English One (1) Coyote-colored pistol case

The GLOCK 19X is a compact magazine-fed pistol. The GLOCK 19X is equipped with the “Safe Action” System, a safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released after the slide cycles. The GLOCK 19X utilizes a frame with the grip size of the GLOCK 17 and a slide the size of the GLOCK 19. The frame and slide are coyote in color. The slide is nPVD coated. The frame features ambidextrous slide stop levers, accessory mounting rail, and has a lanyard loop installed. The frame does not feature finger grooves. The backstraps of the frame can be removed/installed by the user to fit the user’s hand size. The magazine catch is enlarged and can be installed on either side of the frame. The handgun is equipped with the “GLOCK Marksman Barrel, (GMB)” which features polygonal rifling.

The Modular Backstrap Set includes the following items:

One (1) beavertail contour backstrap, size M (2mm), coyote color One (1) beavertail contour backstrap, size L (4mm), coyote color One (1) trigger housing pin MBS (long pin) One (1) installation tool/punch

Characteristics Color: Coyote Magazine capacity: 17 rounds or 17+2 rounds as standard

Technical Data Caliber: 9x19mm Weight: approx. 625g (22.05 oz) Unloaded, no magazine Length (Overall): approx. 189mm (7.44 inches) Height: approx. 139mm (5.47 inches) Barrel length: approx. 102mm (4.02 inches)

Description of GLOCK 43X System For the purposes of this acquisition, the GLOCK G43X with a Black or Silver Slide, with or without Night Sights, is defined as follows:

One (1) GLOCK G43X with Black or Silver Slide One (1) set self-luminous front and rear night sights (standard height), installed when requested Two (2) 10 round magazines One (1) Cable lock One (1) Cleaning rod One (1) Nylon brush One (1) Magazine speed loader One (1) Pistol carrying case One (1) Instruction Manual in English

The GLOCK 43X is a subcompact magazine-fed pistol chambered in 9x19mm. The pistol is equipped with GLOCK’s proprietary “Safe Action” System, the safety system consisting of three passive, independently operating, mechanical safeties. When the trigger is pulled, the three safeties sequentially disengage and automatically reengage when the trigger is released after the slide cycles.

The GLOCK 43X uses a black frame the size of the G48. The slide is either black or silver with an nPVD finish and milled front serrations. The slide is also equipped with 4.1mm height front and 6.1mm height rear polymer sights, or self-luminous night sights when requested. The frame includes a shorter trigger distance compared to the other Gen 5 pistols, a built-in beavertail, and a reversible magazine catch. The magazine holds a maximum capacity of 10 rounds and contains an orange follower. The pistols use the GLOCK Marksman Barrel (GMB), which features polygonal rifling.

Technical Data Caliber: 9x19mm Weight: Approx. 465g (16.40oz) Unloaded, no magazine Length: Approx. 165mm (6.5in) Width: Approx. 28mm (1.10in) Height: Approx. 128mm (5.04in) Barrel length: Approx. 87mm (3.41in)

Description of GLOCK G17T FX/FOF System For the purpose of this acquisition, the GLOCK G17T FX/FOF System is defined as the following:

One (1) GLOCK G17T FX/FOF training pistol Three (3) magazines with 17 round capacity each (factory GLOCK only) One (1) set self-luminous front and rear night sights (standard height), installed (when requested) One (1) Set Modular Back Straps (Gen 4 and 5 only) One (1) operator’s manual One (1) speed loader appropriate for G17T magazines One (1) cleaning set; includes caliber appropriate brush and cleaning rod One (1) pistol case One (1) cable lock

The MOS configuration also includes the following:

The interchangeable optic mounting plate set includes one (1) each of the following:

The GLOCK 17T is a lightweight magazine fed pistol without a compensated or ported barrel. The GLOCK 17T is equipped with the “Safe Action” System, a fully automatic safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released.

The GLOCK 17T is based on the GLOCK 17 but is modified to only fire FX/FOF training ammunition. Training pistols are colored blue to differentiate them from pistols that fire live ammunition.

The exact version required (Generation) and sight specification (Standard or Night Sights) will be specified on an order-by-order basis. All magazines shipped are only compatible with specified training ammunition.

Technical Data Caliber: Training Width (Gen 3 and Gen 4): approx. 32mm (1.26 inches) Width (Gen 5): approx. 34mm (1.34 inches) Height (including magazine): approx. 139mm (5.47 inches) Overall Length (Gen 3): approx. 204mm (8.03 inches) Overall Length (Gen 4 and 5): approx. 202mm (7.95 inches) Barrel length: approx. 114mm (4.49 inches) Weight (with empty magazine, Gen 3 and Gen 4): approx. 550 g (19.40 ounces) Weight (with empty magazine, Gen 5): approx. 560 g (19.75 ounces)

Characteristics Magazine capacity – 17 Rounds standard Rifling- Hexagonal profile with right-hand twist of one turn in 9.84 in. (250 mm) Uncompensated (no porting in barrel) Self-luminous night sights (when requested)

Generation 3

· Finger groove and rail frame

· Non-ambidextrous magazine catch

· Single recoil spring guide rod

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 4

· Rough textured frame

· Enlarged, reversible magazine catch

· Dual recoil spring assembly

· Modular Back Strap System

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 5

· Flared magazine well

· Glock Marksman Barrel (GMB)

· Ambidextrous Slide Stop

· No finger grooves

· nDLC finish

· Reinforced slide rails

· Front slide serrations

Description of GLOCK G19T FX/FOF System For the purpose of this acquisition, the GLOCK G17T FX/FOF System is defined as the following:

One (1) GLOCK 19T FX/FOF training pistol Three (3) magazines with 15 round capacity each (factory GLOCK only) One (1) set self-luminous front and rear night sights (standard height), installed (when requested) One (1) Set Modular Back Straps (Gen 4 and 5 only) One (1) operator’s manual One (1) speed loader appropriate for G19T magazines One (1) cleaning set; includes caliber appropriate brush and cleaning rod One (1) pistol case One (1) cable lock

The MOS configuration also includes the following:

The interchangeable optic mounting plate set includes one (1) each of the following:

The GLOCK 19T is a lightweight magazine fed pistol without a compensated or ported barrel. The GLOCK 19T is equipped with the “Safe Action” System, a fully automatic safety system consisting of three passive, independently operating, mechanical safeties, which sequentially disengage when the trigger is pulled and automatically reengage when the trigger is released.

The GLOCK 19T is based on the GLOCK 19 but is modified to only fire FX/FOF training ammunition. Training pistols are colored blue to differentiate them from pistols that fire live ammunition.

The exact version required (Generation) and sight specification (Standard or Night Sights) will be specified on an order-by-order basis. All magazines shipped are only compatible with specified training ammunition.

Technical Data

· Caliber: 9x19mm

· Width (Gen 3 and Gen 4): approx. 32mm (1.26 inches)

· Width (Gen 5): approx. 34mm (1.34 inches)

· Height (including magazine): approx. 128mm (5.04 inches)

· Overall Length (Gen 3): approx. 187mm (7.36 inches)

· Overall Length (Gen 4 and 5): approx. 185mm (7.28 inches)

· Barrel length: approx. 102mm (4.02 inches)

· Weight (with empty magazine, Gen 3 and 4): approx. 510 g (17.99 ounces)

· Weight (with empty magazine, Gen 5): approx. 535 g (18.87 ounces)

Characteristics Magazine capacity – 15 Rounds standard Rifling- Hexagonal profile with right-hand twist of one turn in 9.84 in. (250 mm) Uncompensated (no porting in barrel) Self-luminous night sights (when requested)

Generation 3

· Finger groove and rail frame

· Non-ambidextrous magazine catch

· Single recoil spring guide rod

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 4

· Rough textured frame

· Enlarged, reversible magazine catch

· Dual recoil spring assembly

· Modular Back Strap System

· Nominal 28N (6.3lb) trigger pull (standard)

Generation 5

· Flared magazine well

· Glock Marksman Barrel (GMB)

· Ambidextrous Slide Stop

· No finger grooves

· nDLC finish

· Reinforced slide rails

· Front slide serrations

Description of GLOCK Magazines For the purposes of this acquisition, the GLOCK Magazines are defined as follows:

All magazines must be current production factory GLOCK only. Generation compatibility is noted in the chart below.

All magazines are standard capacity for the intended model.

Model, OEM part number, caliber, and capacities are listed below.

Part numbers are provided for reference only and are subject to change/error. Identified part numbers may represent bulk items. Packaged items are also acceptable and may have a different part number.

NOTE: The “Gen4” magazine is designed for use with the reversible magazine catch of the Gen4 pistol frame. It is also appropriate and compatible with Gen 3 pistols. This magazine is included with all Gen3 and Gen4 pistols.

NOTE: The “Gen5” magazine is designed for use with the Gen 5 and Gen 6 pistol frame and comes with an orange follower. This magazine is included with all Gen 5 and Gen 6 pistols.

Description of GLOCK MOS/I Operators Training Course

For the purposes of this acquisition, the GLOCK MOS/I Operators Training Course is defined as follows:

A two-day course that encapsulates all the concepts of the Operators Course and The MOS Course with a focus on optics usage, iron sight usage, and the transition from iron sight to optics systems. The course will include the following content areas:

· Introduction

· Required Equipment

· Safety Brief

· Range Procedures and Commands

· Nomenclature of the Pistol

· Ballistics

· Dry Practice

· Presentation of the Pistol

· Fundamentals of Marksmanship

· Red Dot Selection and Considerations

· Manipulation of the GLOCK Pistol

· Ready Positions

· Malfunctions

· Target Engagements

· Shooting on the Move

This course is available for up to twelve (12) students per class.

Description of GLOCK Combined Armorer Training Course

For the purposes of this acquisition, the GLOCK Combined Armorer Training Course is defined as follows:

A two-day, 16-hour training course that combines the curriculum of GLOCK’s Armorer Course with the curriculum of GLOCK’s Advanced Armorer Course. The course outline is as follows:

From the Armorer Course

· Introduction

· Safety Check

· Safety Function

· Field Stripping

· Slide Disassembly and Reassembly

· Frame Disassembly and Reassembly

· Slide Options

· Frame Options

· Magazines

· Field Inspection Test

· Rifling

· Preventative Maintenance

· Lubrication

· GLOCK Sights

· Service Procedures

· Armorer Practical Examination

· Armorer Written Examination

From the Advanced Armorer Course

· Detailed Disassembly and Reassembly

· Generation, Model, and Part upgrades and changes

· Troubleshooting, diagnosis, and repair

· Advanced Armorer Practical Examination

· Advanced Armorer Written Examination

This course is available for up to twenty (20) students per class.