Attachment 0005 - DD254 WSMR MSS 20MAR2025.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

CUI

DD Form 254, APR 2018 PREVIOUS EDITION IS OBSOLETE

Section 13 Continuation: SECURITY GUIDANCE. The security classification guidance needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes: to challenge the guidance or classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any document/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.

10a: Classified COMSEC material is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level.

COMSEC access shall be IAW DoD 5220.22-M and AR 380-40. When access is required at Government facilities, contractor personnel will adhere to COMSEC rules and regulations as mandated by Command policy and procedures. Written concurrence of the CM is required prior to subcontracting.

10b: Restricted Data is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. Written concurrence of the KO is required prior to subcontracting.

10c: CNWDI Information is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. Written concurrence of the KO is required prior to subcontracting.

10d: The contractor is permitted access to Formerly Restricted Data (FRD) in the performance of this contract. Access to FRD requires a final U.S.

Government clearance at the appropriate level.

10e1: SCI Access required. No public release of information authorized, public disclosure or confirmation of any subject related to the support contract is not authorized without first obtaining written approval from the CM.

10e2: Non-SCI Information is not releasable to contractor employees who have not received a clearance at the appropriate security level. Written concurrence of the CM is required prior to subcontracting. Access to Intelligence information required for performance.

10g: Personnel not assigned to a NATO staff position, but requiring access to NATO classified information, NATO COSMIC, NATO Secret or access to the NATO accredited SIPRNET terminals, must possess the equivalent FINAL or Interim U.S. Security Clearance based upon the appropriate personnel security investigation required. Personnel with access to NATO ATOMAL information must have the appropriate level FINAL U.S. Security Clearance. The government program/project manager is the designated representative that will ensure the contractor security manager and concerned employees are NATO briefed prior to access being granted. The contractor will maintain strict compliance in regards to NATO information IAW NISPOM Ch 10, Section 7.

Prior approval from the CM is required for subcontracting.

10h: Foreign Government Information (FGI) is not releasable to contractor employees who have not received a FINAL clearance at the appropriate security level. Written concurrence of the CM is required prior to subcontracting.

10i: For Official Use Only (FOUO) CUI Information generated and/or provided under this contract shall be safeguarded and marked as specified in DoD 5200.1-R.

10j: For Official Use Only (FOUO) Information generated and/or provided under this contract shall be safeguarded and marked as specified in DoD 5200.1-R.

10k: IF PROVIDED THIS TEXT SHOULD PROVIDE A COMPLETE DESCRIPTION FOR (OTHER) Additional notes: Additional notes: Access and processing requirements associated with any Special Access Information/Program will be identified in the specific program protection plan associated with the applicable program and provided by appropriate SAP Security Personnel. SAPs will be operated IAW AR 380-381 or agency specific equivalent.

11a: Contractor performance is restricted. Government agency or activity will provide security classification guidance for performance of this contract. Visit request to the CM and/or Security Management Office for need-to-know verification is done through JCAVS IAW Oct 2005 memo.

11j: This contract requires the planning for and application of OPSEC IAW DD Form 1423 (CDRLs), the SOW, DoD Directive 5205.2 and AR 530-1.

11l: The contractor will have access to CUI in connection with a contract requiring access to classified information.

US ARMY SCI ADDENDUM TO DD FORM 254

X (1)-This contract requires access to Sensitive Compartmented Information (SCI). The Commander, US Army Intelligence and Security Command (INSCOM), acting on behalf of the DA Deputy Chief of Staff (DCS), G-2 is the Cognizant Security Authority (CSA) for the US Army, has exclusive security responsibility for all SCI released to the contractor or developed under the contract and held within the Contractor's SCI Facility (SCIF) or Co-utilization Agreement (CUA).

X (2)-The Defense Intelligence Agency (DIA) has security inspection responsibility for SCI and the Defense Security Service (DSS) retains responsibility for all collateral information released or developed under the contract and held within the DoD Contractor's SCIF. All DD Forms 254 prepared for contracts involving access to SCI under this contract must be processed through ACCS to the CM and Industrial Security Specialist for approval.

X (3)-The manuals, regulations, and directives checked below provide the necessary guidance for physical, personnel, and information security for safeguarding SCI, and are part of the security classification specification for this contract:

X (a)-ICD 503, Intelligence Community Information Technology Systems Security Risk Management, Certification and Accreditation

X (b)-ICD 704 Personnel Security Standards and Procedures Governing Eligibility for Access to Sensitive Compartmented Information and Other Controlled Access Program Information

X (c)-IC Tech Spec-for ICD/ICS 705, Technical Specifications for Construction and Management of Sensitive Compartmented Information Facilities

X (d)-Signals Intelligence Security Regulations (SISR) (Available from the CM) X (e)-Imagery Policy Series (Available from the CM) X (f)-DoDM 5105 Vol 1 – 3 SCI Administrative Security Manual.

X (g)-AR 380-28, DA Special Security System X (h)-AR 25-2, Information Assurance

(i)-AR 380-381, Special Access Programs X (j)-Army Handbook for SCI Contracts.

X (k)-Other

X (4)-Contract estimated completion date (PERIOD OF PERFORMANCE ONLY): TBD

X

(NOTE: Option years are not to be included, as an option is not valid until exercised by the government.)

(5)-The name, telephone number, and email and mailing address of the Contract Monitor (CM) for the SCI portion of this contract is: Louis Calderon, Address: 2202 Aberdeen Blvd, Aberdeen Proving Ground, MD, 21005, Phone: 5756784793, Email: louis.e.calderon.civ@army.mil (Additionally, identify the Security POC, phone number, and email address at the contractor’s/ subcontractor’s location): TBD (The CM and the contractor security officer must be registered in the Army Centralized Contracts and Security Portal (ACCS) at the level of contract, in order to process SCI actions)

X (6)-All DD Forms 254 prepared for contracts involving access to SCI under this contract must be processed through ACCS to the CM and Industrial Security Specialist for approval and to Contractor Support Element, USAINSCOM, ACofS Security, G2 for review and concurrence of the awarded contract.

X (7)-Visit certification to DoD locations is not required, as need to know and accesses is verified at the visiting facility. Non DoD locations the contractor must process request for SCI visit certification(s) through ACCS to the CM for approval and to Contractor Support Element (CSE) for review and processing. Visit certification request must be submitted at least ten (10) working days prior to the visit.

X (8)-Debriefings: All FSO’s/CSSO’s must properly debrief all contractors from SCI through ACCS.

FSO/CSSO’s must submit the debrief request NLT 7 days and NET 10 days before actual departure.

FSO’s/CSSO’s will separate all contractors from JCAVS after completion of debriefing.

X (9)-The contractor will not reproduce any SCI related material without prior written permission of the CM.

X (10)-Security Classification Guides or extracts are attached or will be provided under separate cover.

X (11)-Electronic processing of SCI requires accreditation of the equipment in accordance with ICD 503 and AR 25-2. (Note: NATO security awareness briefing is required for access to JWICS indicated in blocks 10k or 11l of DD 254.).

(12)-This contract requires a contractor Controlled Space or CUA

X (13)-Request for Indoctrination/Debrief Authority

X (14)-This contract requires (SI) (TK) (G) (HCS) (Add others as required)

X (15)-The contractor will perform SCI work under this contract at the following location (Name of government or contractor activity, SCI SMO or CAGE Code):

Companies: TBD Agencies: W3Q2AA - USA TEST & EVALUATION COMMAND - APG, MD, (16)-The contractor identified in Block 6 is a Multiple Facility Organization (MFO) and is authorized to submit DD254 and SCI Addendum for the following SCI locations (Facility Name and CAGE Code).

(17)- SCI Courier Requirement

Please wait...

If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.

You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.

For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.

Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

PREVIOUS EDITION IS OBSOLETE.

Page of

DD FORM 254, APR 2018

NEEDS DD67

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)

OMB No. 0704-0567

OMB approval expires:

June 30, 2025

The public reporting burden for this collection of information, 0704-0567, is estimated to average 36 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.

1. CLEARANCE AND SAFEGUARDING

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)

3. THIS SPECIFICATION IS: (X and complete as applicable.)

a. ORIGINAL (Complete date in all cases.)

b. REVISED (Supersedes all previous specifications.)

4. IS THIS A FOLLOW-ON CONTRACT?

If yes, complete the following:

Classified material received or generated under

5. IS THIS A FINAL DD FORM 254?

If yes, complete the following:

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

7. SUBCONTRACTOR(S) (Click button if you choose to add or list the subcontractors

-- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor)

8. ACTUAL PERFORMANCE (Click button to add more locations.)

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)

e. NATIONAL INTELLIGENCE INFORMATION:

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)

12. PUBLIC RELEASE

Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)

13. SECURITY GUIDANCE

The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.)

List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form)

14. ADDITIONAL SECURITY REQUIREMENTS

Requirements, in addition to NISPOM requirements for classified information, are established for this contract.

If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

15. INSPECTIONS

Elements of this contract are outside the inspection responsibility of the CSO.

If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.)

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)

17. CERTIFICATION AND SIGNATURES

Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked.

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL

9.0.0.2.20120627.2.874785

DD 254, "DoD Contract Security Classification Specification"

CurrentPage:

PageCount:

Classification (when form is filled in) (automatically filled from previous drop-down list): CUI

Serial Number:

1. CLEARANCE AND SAFEGUARDING - a. LEVEL OF FACILITY SECURITY CLEARANCE (FCL) REQUIRED (See Instructions) - Select from drop-down list: 1

1. CLEARANCE AND SAFEGUARDING - b. LEVEL OF SAFEGUARDING FOR CLASSIFIED INFORMATION/MATERIAL REQUIRED AT CONTRACTOR FACILITY - select from drop-down list: 4

3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "a. ORIGINAL (Complete date in all cases.) ": 0

3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "a. ORIGINAL (Complete date in all cases.) ": 1

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - a. PRIME CONTRACT NUMBER (See instructions.):

3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "b. REVISED (Supersedes all previous specifications.)": 0

3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "b. REVISED (Supersedes all previous specifications.)": 0

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - b. SUBCONTRACT NUMBER:

3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "c. FINAL (Complete Item 5 in all cases.)": 1

3. THIS SPECIFICATION IS: (X and complete as applicable.) - Select for "c. FINAL (Complete Item 5 in all cases.)": 0

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - c. SOLICITATION OR OTHER NUMBER: W51EW7-25-R-A003

2. THIS SPECIFICATION IS FOR: (X and complete as applicable.) - c. SOLICITATION OR OTHER NUMBER - DUE DATE (YYYYMMDD):

3. THIS SPECIFICATION IS: (X and complete as applicable.) - a. ORIGINAL (Complete date in all cases.) : 20250320

3. THIS SPECIFICATION IS: (X and complete as applicable.) - b. REVISED (Supersedes all previous specifications.) - REVISION NUMBER:

3. THIS SPECIFICATION IS: (X and complete as applicable.) - b. REVISED (Supersedes all previous specifications.) - DATE (YYYYMMDD):

3. THIS SPECIFICATION IS: (X and complete as applicable.) - c. FINAL (Complete Item 5 in all cases.):

3. THIS SPECIFICATION IS: (X and complete as applicable.) - c. FINAL (Complete Item 5 in all cases.) - DATE (YYYYMMDD):

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 0

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 1

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 0

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "no.": 0

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 1

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 0

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 1

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - Select for "yes.": 1

4. IS THIS A FOLLOW-ON CONTRACT? - If yes - Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract. - Enter preceding contract number.: W9115119C0008

5. IS THIS A FINAL DD FORM 254? - In response to the contractor's request dated (date), retention of the classified material is authorized for the period of (period) - Enter contractor's request date in format YYYYMMDD.:

E5. IS THIS A FINAL DD FORM 254? - In response to the contractor's request dated (date), retention of the classified material is authorized for the period of - Enter period.:

17. CERTIFICATION AND SIGNATURES - Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked. - a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions): TBD

17. CERTIFICATION AND SIGNATURES - Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked. - a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions): TBD

17. CERTIFICATION AND SIGNATURES - Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below. Upon digitally signing Item 17h, no changes can be made as the form will be locked. - a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions): Calderon, Louis E.

17. CERTIFICATION AND SIGNATURES - e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.): TBD

8. ACTUAL PERFORMANCE - c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional):

8. ACTUAL PERFORMANCE (Click button to add more locations.) - Select to add row :

8. ACTUAL PERFORMANCE - Select to remove last row:

13. SECURITY GUIDANCE - Select to delete all signature rows:

8. ACTUAL PERFORMANCE - a. LOCATION(S) (For actual performance, see instructions.): TBD

Enter general unclassified description of this procurement.: Contractor shall provide non-personal services required to provide operation, maintenance, research and development and other support of facilities, systems, and equipment to meet the White Sands Missile Range (WSMR) test operations mission.

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "a. CONTRACTOR.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "a. CONTRACTOR.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "a. CONTRACTOR.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "f. OTHER AS NECESSARY.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "f. OTHER AS NECESSARY.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "f. OTHER AS NECESSARY.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "b. SUBCONTRACTOR.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "b. SUBCONTRACTOR.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "b. SUBCONTRACTOR.": 0

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "h. REQUIRE A COMSEC ACCOUNT.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "h. REQUIRE A COMSEC ACCOUNT.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION.": 1

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION.": 0

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "i. HAVE A TEMPEST REQUIREMENT.": 0

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "i. HAVE A TEMPEST REQUIREMENT.": 0

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.) - e. NATIONAL INTELLIGENCE INFORMATION: Select for "(1) Sensitive Compartmented Information (SCI).": 1

10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.) - e. NATIONAL INTELLIGENCE INFORMATION: Select for "(2) Non-SCI.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS.": 0

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Enter specification for "other." (If more room is needed, continue in Item 13 or on additional page if necessary.): SIPRNET

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "e. ADMINISTRATIVE CONTRACTING OFFICER.": 0

18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL - Select for "e. ADMINISTRATIVE CONTRACTING OFFICER.": 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "l. RECEIVE, STORE, OR GENERATE CONTROLLED UNCLASSIFIED INFORMATION (CUI)." (DoD Components: refer to DoDI 5200.48, only for specific CUI protection requirements. Non-DoD Components: see instructions.): 1

11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.) - Select for "m. OTHER.": 0

12. PUBLIC RELEASE - Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions) - Select for "DIRECT": 0

12. PUBLIC RELEASE - Select for "THROUGH": 1

12. PUBLIC RELEASE - Enter specification for "through".: PUBLIC RELEASE OF SCI IS NOT AUTHORIZED The KO will provide the office with public release authority and the procedures for making a request.

12. PUBLIC RELEASE - Public Release Authority:: PUBLIC RELEASE OF SCI IS NOT AUTHORIZED

13. SECURITY GUIDANCE - Select to add signature row:

13. SECURITY GUIDANCE - Select to remove last signature row:

13. SECURITY GUIDANCE - The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.

(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. The field will expand as text is added. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. Also allows for up to 6 internal reviewers to digitally sign. See instructions for additional guidance or use of the fillable PDF.): SEE SECTION 13 CONTINUATION SECTION AT THE BOTTOM OF THIS FORM

List of Attachments (All Files Must be attached Prior to Signing, i.e., for any digital signature on the form) - Click on this button to attach a file(s).:

rep: Andrew Rush, ISS

17. CERTIFICATION AND SIGNATURES - h. SIGNATURE :

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.): See SCI addendum / Contractors may or may not be hand receipt holders. Within the Army, COMSEC custodians are either DA civilians or military members. Contractors are considered hand receipt holders. See AR 380-40 for further guidance on COMSEC.

15. INSPECTIONS - Elements of this contract are outside the inspection responsibility of the CSO. - If Yes, explain and identify specific areas and government activity responsible for inspections. The field will expand as text is added or you can also use item 13. When removing any expanded text area, use delete key or backspace key, then click out of the text field for it to shrink after the text has been deleted. (See instructions for additional guidance or use of the fillable PDF.): SCI addendum / HQDA, G2

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC) - a. GCA NAME: Mission and Installation Contracting Command

17. CERTIFICATION AND SIGNATURES - d. AAC OF THE CONTRACTING OFFICE (See Instructions): W51EW7

17. CERTIFICATION AND SIGNATURES - d. AAC OF THE CONTRACTING OFFICE (See Instructions): W51EW7

17. CERTIFICATION AND SIGNATURES - c. ADDRESS (Include ZIP Code): 2219 Infantry Post Road JBSA Fort Sam Houston, TX 78234-1361

17. CERTIFICATION AND SIGNATURES - c. ADDRESS (Include ZIP Code): 126 Crozier St.

White Sands Missile Range, NM 88002

16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC) - d. POC NAME: Danette Wilson

17. CERTIFICATION AND SIGNATURES - f. TELEPHONE (Include Area Code): 5209447371

17. CERTIFICATION AND SIGNATURES - f. TELEPHONE (Include Area Code): 5756784793

17. CERTIFICATION AND SIGNATURES - g. EMAIL ADDRESS (See Instructions): danette.d.wilson.civ@army.mil

17. CERTIFICATION AND SIGNATURES - g. EMAIL ADDRESS (See Instructions): louis.e.calderon.civ@army.mil

17. CERTIFICATION AND SIGNATURES - b. TITLE : Contract support specialist

17. CERTIFICATION AND SIGNATURES - i. DATE SIGNED (See Instructions): 20250320