Attachment 0003 Engineering_Exceptions.docx
DOCX document 24 KB Posted
- Solicitation number
- W56HZV19R0293
About this file
This document contains engineering exceptions and packaging instructions for various National Stock Numbers to be procured from Avon Protection Systems on a sole-source basis. Key details include specifications for unit packing configurations and sketches, part number references, quality assurance procedures, and First Article testing requirements. Packaging and testing are to be conducted according to various Special Packaging Instructions and Quality Assurance Plans provided for each NSN. Government-furnished property is also referenced for use in contract performance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 0001 Range Pricing Worksheet.xlsx | XLSX spreadsheet | |
| Attachment 0006 Special Contract Requirements.docx | DOCX document | |
| Attachment 0004 Packaging Requirement.doc | DOC document | |
| Attachment 0009 GFP Attachment.xlsx | XLSX spreadsheet | |
| Attachment 0005 Production Lot Testing.docx | DOCX document | |
| Attachment 0002 FAT Pricing Worksheet.xlsx | XLSX spreadsheet | |
| Attachment 0007 FAT Report and Testing Requirements.docx | DOCX document | |
| W56HZV19R0293.pdf | ||
| Attachment 0008 FAT Waiver.pdf | ||
| Request_For_Information_Chemical_Mask_Systems_LTC_Final.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 0003 – ENGINEERING EXCEPTIONS
C.1 Engineering Exceptions
| NSN |
| Exception |
| 4240-01-512-4429 |
| 1. NSN 4240-01-512-4429 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, in accordance with 5-1-3527. |
2. Include FAT local clause.
3. P5-1-3527-10, Revision A, dated 16 January 2020:
a. Page 2, section (D), under UNIT PACK, change the second sentence to the following: "As an ALTERNATE, the custom style unit pack box and assembly shown on Sketches 3, 4, 5, 6, and 7 may be used."
b. Page 2, section (D), under ALTERNATE UNIT PACK CONFIGURATION, change the second sentence to the following: "The insert Sketches 4 and 5, is required."
c. Page 10, middle-right of sketch, change note to: "FOLDED INSERT (SEE NOTE 7 AND SKETCH NOs. 4 AND 5)"
d. Page 10, bottom-left of sketch, change note to: "UNIT PACK BOX (SEE SKETCH NOs. 6 AND 7 FOR FABRICATION AND SET UP DETAILS)"
e. Page 13, rename the sketch to "SKETCH NO. 4 - ALTERNATE UNIT PACK ASSEMBLY INSERT"
f. Page 13, Figure 3, change the parenthetical to: "(SEE SKETCH NO. 3)"
g. Page 14, rename the sketch to "SKETCH NO. 5 - INSERT ASSEMBLY - ALTERNATE UNIT PACK ASSEMBLY"
h. Page 15, rename the sketch to "SKETCH NO. 6 - BOX FABRICATION DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
i. Page 15, Note 1, change to "SEE FOLDING DETAIL, SKETCH NO. 7."
j. Page 16, rename the sketch to "SKETCH NO. 7 - BOX ASSEMBLY DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
4240-01-512-4431
1. NSN 4240-01-512-4431 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5).
2. Include FAT local clause.
3. In TDPL 20200075, dated 28 January 2020:
a. Add the attached 5-1-4172, Revision A, dated 15 November 2018 and QAP5-1-4171, Revision C, dated 05 August 2013
b. Replace P71014_12, Revision A, dated 20 October 2014, with the attached P5-1-4327, Revision A, dated 14 November 2019; add the attached 5-1-4327, dated 19 December 2018; and replace QAP71021_3, dated 26 October 2009, with the attached QAP5-1-4328, dated 18 December 2018
c. Replace QAP71016_10, dated 02 February 2010, with the attached QAP5-1-4365, dated 19 December 2019; replace P71016_10, dated 21 September 2010 with the attached P5-1-4365, dated 23 December 2019; and add the attached 5-1-4365, dated 06 January 2020
d. Remove QAP71006_1, P71000_1, P71006_1, and P71024_1, as they are not required for this procurement
4. On drawing 5-1-3526, Revision A, dated 06 June 2017, with approved NORs 275-0086-001 and 275-0091-001:
a. Parts List, item 4, change the part number from "71024/1" to "5-1-4172"
b. Parts List, item 5, change the part number from "71014/12" to "5-1-4327"
c. Parts List, item 8, change the part number from "71016/10" to "5-1-4365"
d. Parts List, item 11, add part number "5-75-2"
5. On SPI P5-1-3526-10, Revision B, dated 14 December 2018:
a. Page 2, section (D), under UNIT PACK, change the second sentence to the following: "As an ALTERNATE, the custom style unit pack box and assembly shown on Sketches 3, 4, 5, 6, and 7 may be used."
b. Page 2, section (D), under ALTERNATE UNIT PACK CONFIGURATION, change the second sentence to the following: "The insert Sketches 4 and 5, is required."
c. Pages 8 and 10, Note 2, change part number from "71016/10" to "5-1-4365" and add the following sentence after the title: "The Operator Cards shall be unit packed in accordance with P5-1-4365."
d. Pages 8 and 10, Note 3, add the following to the end of the first sentence: "... IAW SPI P5-75-2, with the exception that the quantity per unit pack shall be 1."
e. Page 8, Note 6, and Page 10, Note 7, change the part number from "71024/1" to "5-1-4172" and add the following to the end of the paragraph: "Note 10 does not apply."
f. Page 8, Note 7, and Page 10, Note 8, change the part number from "71014/12" to "5-1-4327" and the SPI from "P71014/12" to "P5-1-4327". Also, add the following to the end of both paragraphs: "Place the Clear Outsert Assembly in a position that ensures it will not be bent upon box closure."
g. Pages 8 and 10, add a new Note 10 as follows: "10. As an alternative and unless otherwise noted, each component can be unit packed using a different sized bag (Length X Width) than what is stated in the component's SPI. If a different sized bag is used, it is the contractor's responsibility to ensure that the remaining requirements stated herein are met."
h. Page 9, middle-right of sketch, change note to: "FOLDED INSERT (SEE NOTE 6 AND SKETCH NOs. 4 AND 5)"
i. Page 9, bottom-left of sketch, change note to: "UNIT PACK BOX (SEE SKETCH NOs. 6 AND 7 FOR FABRICATION AND SET UP DETAILS)"
j. Page 11, rename the sketch to "SKETCH NO. 4 - ALTERNATE UNIT PACK ASSEMBLY INSERT"
k. Page 11, Figure 3, change the parenthetical to: "(SEE SKETCH NO. 3)"
l. Page 12, rename the sketch to "SKETCH NO. 5 - INSERT ASSEMBLY - ALTERNATE UNIT PACK ASSEMBLY"
m. Page 13, rename the sketch to "SKETCH NO. 6 - BOX FABRICATION DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
n. Page 13, Note 1, change to "SEE FOLDING DETAIL, SKETCH NO. 7."
o. Page 14, rename the sketch to "SKETCH NO. 7 - BOX ASSEMBLY DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
4240-01-512-4434
1. NSN 4240-01-512-4434 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5).
2. Include FAT local clause.
3. In TDPL 20200097, dated 28 January 2020:
a. Add the attached 5-1-4167, Revision C, dated 05 April 2019; 5-1-4168, Revision B, dated 05 April 2019; 5-1-4169, Revision B, dated 05 April 2019; 5-1-4170, Revision B, dated 08 April 2019; 5-1-4171, Revision B, dated 15 November 2018; 5-1-4172, Revision A, dated 15 November 2018; and QAP5-1-4171, Revision C, dated 05 August 2013
b. Replace P71014_12 with the attached P5-1-4327, Revision A, dated 14 November 2019
c. Add the attached 5-1-4327, dated 19 December 2018, and QAP5-1-4328, dated 18 December 2018
d. Replace QAP71016_10, dated 02 February 2010, with QAP5-1-4365, dated 19 December 2019; add P5-1-4365, dated 23 December 2019; and add 5-1-4365, dated 06 January 2020
e. Remove QAP71006_1, P71000_2, P71006_1, and P71024_1, as they are not required for this procurement
4. On drawing 5-1-3526, Revision A, dated 06 June 2017, with approved NORs 275-0086-001 and 275-0091-001:
a. Parts List, item 4, change the part number from "71024/1" to "5-1-4172"
b. Parts List, item 5, change the part number from "71014/12" to "5-1-4327"
c. Parts List, item 8, change the part number from "71016/10" to "5-1-4365"
d. Parts List, item 11, add part number "5-75-2"
5. On SPI P5-1-3526-20, Revision B, dated 14 December 2018:
a. Page 2, section (D), under UNIT PACK, change the second sentence to the following: "As an ALTERNATE, the custom style unit pack box and assembly shown on Sketches 3, 4, 5, 6, and 7 may be used."
b. Page 2, section (D), under ALTERNATE UNIT PACK CONFIGURATION, change the second sentence to the following: "The insert Sketches 4 and 5, is required."
c. Pages 8 and 10, Note 2, change part number from "71016/10" to "5-1-4365" and add the following sentence after the title: "The Operator Cards shall be unit packed in accordance with P5-1-4365."
d. Pages 8 and 10, Note 3, add the following to the end of the first sentence: "... IAW SPI P5-75-2, with the exception that the quantity per unit pack shall be 1."
e. Page 8, Note 6, and Page 10, Note 7, change the part number from "71024/1" to "5-1-4172" and add the following to the end of the paragraph: "Note 10 does not apply."
f. Page 8, Note 7, and Page 10, Note 8, change the part number from "71014/12" to "5-1-4327" and the SPI from "P71014/12" to "P5-1-4327". Also, add the following to the end of both paragraphs: "Place the Clear Outsert Assembly in a position that ensures it will not be bent upon box closure."
g. Pages 8 and 10, add a new Note 10 as follows: "10. As an alternative and unless otherwise noted, each component can be unit packed using a different sized bag (Length X Width) than what is stated in the component's SPI. If a different sized bag is used, it is the contractor's responsibility to ensure that the remaining requirements stated herein are met."
h. Page 9, middle-right of sketch, change note to: "FOLDED INSERT (SEE NOTE 6 AND SKETCH NOs. 4 AND 5)"
i. Page 9, bottom-left of sketch, change note to: "UNIT PACK BOX (SEE SKETCH NOs. 6 AND 7 FOR FABRICATION AND SET UP DETAILS)"
j. Page 11, rename the sketch to "SKETCH NO. 4 - ALTERNATE UNIT PACK ASSEMBLY INSERT"
k. Page 11, Figure 3, change the parenthetical to: "(SEE SKETCH NO. 3)"
l. Page 12, rename the sketch to "SKETCH NO. 5 - INSERT ASSEMBLY - ALTERNATE UNIT PACK ASSEMBLY"
m. Page 13, rename the sketch to "SKETCH NO. 6 - BOX FABRICATION DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
n. Page 13, Note 1, change to "SEE FOLDING DETAIL, SKETCH NO. 7."
o. Page 14, rename the sketch to "SKETCH NO. 7 - BOX ASSEMBLY DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
4240-01-512-4435
1. NSN 4240-01-512-4435 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, in accordance with 5-1-3527.
2. Include FAT local clause.
3. P5-1-3527-20, Revision B, dated 16 January 2020:
a. Page 2, section (D), under UNIT PACK, change the second sentence to the following: "As an ALTERNATE, the custom style unit pack box and assembly shown on Sketches 3, 4, 5, 6, and 7 may be used."
b. Page 2, section (D), under ALTERNATE UNIT PACK CONFIGURATION, change the second sentence to the following: "The insert Sketches 4 and 5, is required."
c. Page 10, middle-right of sketch, change note to: "FOLDED INSERT (SEE NOTE 7 AND SKETCH NOs. 4 AND 5)" d. Page 10, bottom-left of sketch, change note to: "UNIT PACK BOX (SEE SKETCH NOs. 6 AND 7 FOR FABRICATION AND SET UP
DETAILS)"
e. Page 13, rename the sketch to "SKETCH NO. 4 - ALTERNATE UNIT PACK ASSEMBLY INSERT"
f. Page 13, Figure 3, change the parenthetical to: "(SEE SKETCH NO. 3)"
g. Page 14, rename the sketch to "SKETCH NO. 5 - INSERT ASSEMBLY - ALTERNATE UNIT PACK ASSEMBLY"
h. Page 15, rename the sketch to "SKETCH NO. 6 - BOX FABRICATION DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
i. Page 15, Note 1, change to "SEE FOLDING DETAIL, SKETCH NO. 7."
j. Page 16, rename the sketch to "SKETCH NO. 7 - BOX ASSEMBLY DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
4240-01-512-4436
1. NSN 4240-01-512-4436 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, in accordance with 5-1-3527.
2. Include FAT local clause.
3. P5-1-3527-30, Revision B, dated 16 January 2020:
a. Page 2, section (D), under UNIT PACK, change the second sentence to the following: "As an ALTERNATE, the custom style unit pack box and assembly shown on Sketches 3, 4, 5, 6, and 7 may be used."
b. Page 2, section (D), under ALTERNATE UNIT PACK CONFIGURATION, change the second sentence to the following: "The insert Sketches 4 and 5, is required."
c. Page 10, middle-right of sketch, change note to: "FOLDED INSERT (SEE NOTE 7 AND SKETCH NOs. 4 AND 5)"
d. Page 10, bottom-left of sketch, change note to: "UNIT PACK BOX (SEE SKETCH NOs. 6 AND 7 FOR FABRICATION AND SET UP DETAILS)"
e. Page 13, rename the sketch to "SKETCH NO. 4 - ALTERNATE UNIT PACK ASSEMBLY INSERT"
f. Page 13, Figure 3, change the parenthetical to: "(SEE SKETCH NO. 3)"
g. Page 14, rename the sketch to "SKETCH NO. 5 - INSERT ASSEMBLY - ALTERNATE UNIT PACK ASSEMBLY"
h. Page 15, rename the sketch to "SKETCH NO. 6 - BOX FABRICATION DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
i. Page 15, Note 1, change to "SEE FOLDING DETAIL, SKETCH NO. 7."
j. Page 16, rename the sketch to "SKETCH NO. 7 - BOX ASSEMBLY DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
4240-01-512-4437
1. NSN 4240-01-512-4437 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5).
2. Include FAT local clause.
3. In TDPL 20200099, dated 28 January 2020:
a. Add the attached 5-1-4172, Revision A, dated 15 November 2018 and QAP5-1-4171, Revision C, dated 05 August 2013
b. Replace P71014_12, Revision A, dated 20 October 2014, with the attached P5-1-4327, Revision A, dated 14 November 2019;
add the attached 5-1-4327, dated 19 December 2018; and replace QAP71021_3, dated 26 October 2009, with the attached QAP5-1-4328, dated 18 December 2018
c. Replace QAP71016_10, dated 02 February 2010, with the attached QAP5-1-4365, dated 19 December 2019; replace P71016_10, dated 21 September 2010 with the attached P5-1-4365, dated 23 December 2019; and add the attached 5-1-4365, dated 06 January 2020
d. Remove QAP71006_1, P71000_3, P71006_1, and P71024_1, as they are not required for this procurement
4. On drawing 5-1-3526, Revision A, dated 06 June 2017, with approved NORs 275-0086-001 and 275-0091-001:
a. Parts List, item 4, change the part number from "71024/1" to "5-1-4172"
b. Parts List, item 5, change the part number from "71014/12" to "5-1-4327"
c. Parts List, item 8, change the part number from "71016/10" to "5-1-4365"
d. Parts List, item 11, add part number "5-75-2"
5. On SPI P5-1-3526-30, Revision B, dated 14 December 2018:
a. Page 2, section (D), under UNIT PACK, change the second sentence to the following: "As an ALTERNATE, the custom style unit pack box and assembly shown on Sketches 3, 4, 5, 6, and 7 may be used."
b. Page 2, section (D), under ALTERNATE UNIT PACK CONFIGURATION, change the second sentence to the following: "The insert Sketches 4 and 5, is required."
c. Pages 8 and 10, Note 2, change part number from "71016/10" to "5-1-4365" and add the following sentence after the title: "The Operator Cards shall be unit packed in accordance with P5-1-4365."
d. Pages 8 and 10, Note 3, add the following to the end of the first sentence: "... IAW SPI P5-75-2, with the exception that the quantity per unit pack shall be 1."
e. Page 8, Note 6, and Page 10, Note 7, change the part number from "71024/1" to "5-1-4172" and add the following to the end of the paragraph: "Note 10 does not apply."
f. Page 8, Note 7, and Page 10, Note 8, change the part number from "71014/12" to "5-1-4327" and the SPI from "P71014/12" to "P5-1-4327". Also, add the following to the end of both paragraphs: "Place the Clear Outsert Assembly in a position that ensures it will not be bent upon box closure."
g. Pages 8 and 10, add a new Note 10 as follows: "10. As an alternative and unless otherwise noted, each component can be unit packed using a different sized bag (Length X Width) than what is stated in the component's SPI. If a different sized bag is used, it is the contractor's responsibility to ensure that the remaining requirements stated herein are met."
h. Page 9, middle-right of sketch, change note to: "FOLDED INSERT (SEE NOTE 6 AND SKETCH NOs. 4 AND 5)"
i. Page 9, bottom-left of sketch, change note to: "UNIT PACK BOX (SEE SKETCH NOs. 6 AND 7 FOR FABRICATION AND SET UP DETAILS)"
j. Page 11, rename the sketch to "SKETCH NO. 4 - ALTERNATE UNIT PACK ASSEMBLY INSERT"
k. Page 11, Figure 3, change the parenthetical to: "(SEE SKETCH NO. 3)"
l. Page 12, rename the sketch to "SKETCH NO. 5 - INSERT ASSEMBLY - ALTERNATE UNIT PACK ASSEMBLY"
m. Page 13, rename the sketch to "SKETCH NO. 6 - BOX FABRICATION DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
n. Page 13, Note 1, change to "SEE FOLDING DETAIL, SKETCH NO. 7."
o. Page 14, rename the sketch to "SKETCH NO. 7 - BOX ASSEMBLY DETAIL - ALTERNATE UNIT PACK ASSEMBLY"
4240-01-529-0593
1. 4240-01-529-0593 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5).
2. Include FAT local clause.
3. Unless otherwise instructed, packaging shall be in accordance with Special Packaging Instructions P71000_3 Revision A dated 20 August 2017.
4. TDPL 20191320 dated 02 JAN 2020, under SPECIFICATIONS AND STANDARDS, add the following: Draft Performance Specification: EA-F-2243, dated 8 February 2017, Item Specification for Facepiece Assembly
4. Test and inspect the Facepiece Assembly in accordance with draft specification EA-F-2243 dated 8 February 2017.
5. Upon request, the Government shall furnish the items specified in paragraph 3.6 of EA-F-2243 to the contractor for use in performance of the contract.
| 4240-01-529-0601 |
| 1. 4240-01-529-0601 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5). |
2. Include FAT local clause.
3. Unless otherwise instructed, packaging shall be in accordance with Special Packaging Instructions P71000_2 Revision A dated 20 August 2017.
4. TDPL 20191407 dated 02 JAN 2020, under SPECIFICATIONS AND STANDARDS, add the following: Draft Performance Specification: EA-F-2243, dated 8 February 2017, Item Specification for Facepiece Assembly
5. Test and inspect the Facepiece Assembly in accordance with draft specification EA-F-2243 dated 8 February 2017.
6. Upon request, the Government shall furnish the items specified in paragraph 3.6 of EA-F-2243 to the contractor for use in performance of the contract.
| 4240-01-529-0602 |
| 1. 4240-01-529-0602 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5). |
2. Include FAT local clause.
3. Unless otherwise instructed, packaging shall be in accordance with Special Packaging Instructions P71000_1 Revision A dated 20 August 2017.
4. TDPL 20191409 dated 02 JAN 2020, under SPECIFICATIONS AND STANDARDS, add the following: Draft Performance Specification: EA-F-2243, dated 8 February 2017, Item Specification for Facepiece Assembly
5. Test and inspect the Facepiece Assembly in accordance with draft specification EA-F-2243 dated 8 February 2017.
6. Upon request, the Government shall furnish the items specified in paragraph 3.6 of EA-F-2243 to the contractor for use in performance of the contract.
| 4240-01-529-1399 |
| 1. NSN 4240-01-529-1399 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5). |
2. Include local FAT clause.
| 4240-01-539-5593 |
| 1. NSN 4240-01-539-5593 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 71006/1. |
2. Test and inspect in accordance with QAP71006_1.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instruction (SPI) P71006_1.
4. Include FAT local clause.
| 4720-01-528-9285 |
| 1. NSN 4720-01-528-9285 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 71012/1. |
2. Test and inspect in accordance with QAP71012_1.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instruction (SPI) P71012_1.
4. Include FAT local clause.
| 4820-01-528-9291 |
| 1. NSN 4820-01-528-9291 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 71005/4. |
2. Include FAT local clause.
3. On TDPL #20200019, include Notice of Revision (NOR) 275-0113-001 for drawing 5-1-4210.
| 4820-01-528-9292 |
| 1. NSN 4820-01-528-9292 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 71005/2. |
2. Include FAT local clause.
3. On TDPL #20200018, include Notice of Revision (NOR) 275-0110-001 for drawing 5-1-4209.
| 8465-01-529-0599 |
| 1. NSN 8465-01-529-0599 shall be procured sole-source from Avon Protection Systems, Inc. (CAGE 1LEW5). |
2. This item shall meet all mask carrier requirements within the latest revision (including outstanding NORs) of EA-M-10003.
| 8465-01-529-1397 |
| 1. NSN 8465-01-529-1397 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
| 4240-01-539-3426 |
| 1. NSN 4240-01-539-3426 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
| 5330-01-530-1002 |
| 1. NSN 5330-01-530-1002 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72003/4. |
2. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72003_4.
3. Test and inspect in accordance with QAP72003_4.
| 4240-01-646-2614 |
| 1. NSN 4240-01-646-2614 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/27. |
2. Include local FAT clause.
3. In TDPL 20200116:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_3, dated 21 March 2012
iv. P72010_5, not released
v. P5-1-4203, Revision B, dated 20 August 2017
vi. P5-1-4327, Revision A, dated 14 November 2019
vii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-20, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_4, pack Protective Hood, RH, X-Small (P/N 72010/4) in accordance with SPI P5-1-4342-40, dated 10 September 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2625 |
| 1. NSN 4240-01-646-2625 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/21. |
2. Include local FAT clause.
3. In TDPL 20200122:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_3, dated 21 March 2012
iv. P72010_4, not released
v. P72010_5, not released
vi. P5-1-4203, Revision B, dated 20 August 2017
vii. P5-1-4327, Revision A, dated 14 November 2019
viii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-80, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_1, pack Protective Hood, RH, Large (P/N 72010/1) in accordance with SPI P5-1-4342-10, dated 10 September 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2637 |
| 1. NSN 4240-01-646-2637 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/24. |
2. Include local FAT clause.
3. In TDPL 20200119:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019;
QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_3, dated 21 March 2012
iv. P72010_4, not released
v. P72010_5, not released
vi. P5-1-4203, Revision B, dated 20 August 2017
vii. P5-1-4327, Revision A, dated 14 November 2019
viii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-50, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_6, pack Protective Hood, LH, Medium (P/N 72010/6) in accordance with SPI P5-1-4342-60, dated 10 September 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2646 |
| 1. NSN 4240-01-646-2646 shall be procured, sole-sourced from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/26. |
2. Include local FAT clause.
3. In TDPL 20200117:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_3, dated 21 March 2012
iv. P72010_4, not released
v. P72010_5, not released
vi. P5-1-4203, Revision B, dated 20 August 2017
vii. P5-1-4327, Revision A, dated 14 November 2019
viii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-30, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_7, pack Protective Hood, LH, Small (P/N 72010/7) in accordance with SPI P5-1-4342-70, dated 10 September 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2683 |
| NSN 4240-01-646-2683 shall be procured, sole-sourced from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/22. |
2. Include local FAT clause.
3. In TDPL 20200121:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_3, dated 21 March 2012
iv. P72010_4, not released
v. P5-1-4203, Revision B, dated 20 August 2017
vi. P5-1-4327, Revision A, dated 14 November 2019
vii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-70, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_5, pack Protective Hood, LH, Large (P/N 72010/5) in accordance with SPI P5-1-4342-50, dated 9 April 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2699 |
| 1. NSN 4240-01-646-2699 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/23. |
2. Include local FAT clause.
3. In TDPL 20200120:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_3, dated 21 March 2012
iii. P72010_4, not released
iv. P72010_5, not released
v. P5-1-4203, Revision B, dated 20 August 2017
vi. P5-1-4327, Revision A, dated 14 November 2019
vii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-60, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_2, pack Protective Hood, RH, Medium (P/N 72010/2) in accordance with SPI P5-1-4342-20, dated 10 September 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2709 |
| 1. NSN 4240-01-646-2709 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/25. |
2. Include local FAT clause.
3. In TDPL 20200118:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_4, not released
iv. P72010_5, not released
v. P5-1-4203, Revision B, dated 20 August 2017
vi. P5-1-4327, Revision A, dated 14 November 2019
vii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-40, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_3, pack Protective Hood, LH, Small (P/N 72010/3) in accordance with SPI P5-1-4342-30, dated 10 September 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-646-2717 |
| 1. NSN 4240-01-646-2717 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72053/28. |
2. Include local FAT clause.
3. In TDPL 20200060:
a. For P/N 72009_1 (contractor P/N 72009/1), use drawing 5-1-4189, Revision A, dated 30 January 2020, as a reference.
b. Add the attached documents: SPI P72005, Revision B, dated 02 July 2019; SPI P5-1-4365, dated 23 December 2019; QAP5-1-4365, dated 19 December 2019; Specification EA-M-10034, dated 19 October 2018; Specification EA-A-2256, Amendment 1, dated 03 February 2020.
c. Remove the following documents as they do not apply to this procurement:
i. P72010, dated 03 January 2010
ii. P72010_2, Revision A, dated 14 February 2019
iii. P72010_3, dated 21 March 2012
iv. P72010_4, not released
v. P72010_5, not released
vi. P5-1-4203, Revision B, dated 20 August 2017
vii. P5-1-4327, Revision A, dated 14 November 2019
viii. P5-1-4328, dated 18 December 2018
4. On drawing 5-1-4189, Revision A, dated 30 January 2020, note 4 does not apply.
5. On drawing 5-1-4243, dated 09 January 2020:
a. P/N 602240 shall be tested and inspected in accordance with Specification EA-A-2256, Amendment 1, dated 03 February 2020.
b. Zone B8, Table I, second column, change "Control Number" to "Supplier Part Number".
c. Test and inspect P/N 72012/4 in accordance with QAP5-1-4365.
6. On SPI P5-1-4243-10, dated 16 January 2020:
a. For drawing 71014_12, use drawings 5-1-4327, 5-1-4328, and QAP5-1-4328 as a reference.
b. In lieu of SPI 72010_8, pack Protective Hood, LH, X-Small (P/N 72010/8) in accordance with SPI P5-1-4342-80, dated 18 June 2019.
c. Package P/N 72012/4 in accordance with SPI P5-1-4365.
| 4240-01-529-8323 |
| 1. NSN 4240-01-529-8323 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8324 |
| 1. NSN 4240-01-529-8324 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8328 |
| 1. NSN 4240-01-529-8328 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8329 |
| 1. NSN 4240-01-529-8329 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8330 |
| 1. NSN 4240-01-529-8330 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8331 |
| 1. NSN 4240-01-529-8331 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8340 |
| 1. NSN 4240-01-529-8340 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8345 |
| 1. NSN 4240-01-529-8345 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include FAT local clause.
3. Government loaned property referenced in EA-H-2247A W/ Amendment 4 is already at the contractor facility. If the contractor requires property listed in EA-H-2247A W/ Amendment 4, it will be provided upon request.
| 4240-01-529-8353 |
| 1. NSN 4240-01-529-8353 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
| 4240-01-529-8357 |
| 1. NSN 4240-01-529-8357 shall be procured sole-sourced from Avon Protection Systems, CAGE 1LEW5 |
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
| 4240-01-529-8358 |
| 1. NSN: 4240-01-529-8358 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
4240-01-529-8360
1. NSN: 4240-01-529-8360 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
| 4240-01-529-8362 |
| 1. NSN: 4240-01-529-8362 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
| 4240-01-529-8365 |
| 1. NSN 4240-01-529-8365 shall be procured sole source from Avon Protection Systems, CAGE 1LEW5 |
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
| 4240-01-529-8366 |
| 1. NSN 4240-01-529-8366 shall be procured sole source from Avon Protection Systems, CAGE 1LEW5 |
2. Government loaned property is already at the contractor facility. If the contractor requires any additional property it will be provided upon request.
3. Include FAT local clause.
| 4240-01-529-9194 |
| 1. NSN 4240-01-529-9194 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. NSN 4240-01-529-9194 shall be tested and inspected in accordance with QAP72003_3.
3. Unless otherwise instructed, when packaging NSN 4240-01-529-9194 for delivery to the Government as a contract line item use SPI P72003_3.
4. Include FAT local clause.
| 4240-01-529-9209 |
| 1. NSN 4240-01-529-9209 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. NSN 4240-01-529-9209 shall be tested and inspected in accordance with QAP72004_2.
3. Unless otherwise instructed, when packaging NSN 4240-01-529-9209 for delivery to the Government as a contract line item use SPI P72004_2.
| 4240-01-660-3862 |
| 1. NSN 4240-01-660-3862 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_32_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 4240-01-660-3863 |
| 1. NSN 4240-01-660-3863 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_30_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 4240-01-660-4224 |
| 1. NSN 4240-01-660-4224 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_28_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
| 4240-01-660-4232 |
| 1. NSN 4240-01-660-4232 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_29_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 4240-01-660-5075 |
| 1. NSN 4240-01-660-5075 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_31_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 4240-01-660-5077 |
| 1. NSN 4240-01-660-5077 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_34_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 4240-01-660-5084 |
| 1. NSN 4240-01-660-5084 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_27_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 4240-01-660-3895 |
| 1. NSN 4240-01-660-3895 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5. |
2. Include local FAT clause.
3. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instructions (SPI) P72001_33_1.
4. When applicable, First Article Testing shall require the following per EA-M-10034 (some tests may require assembly of other parts):
a. 3.2.5.6.1 Forward view
b. 3.2.5.6.10 Distortion
c. 3.2.5.8.2 Drink system flow
d. 3.2.5.8.4 Drink system leakage
e. 3.2.5.11 Buckle pull; sample 'Buckle pull' in accordance with attributes sampling plan of MIL-STD-1916, VL-III.
f. 3.2.5.14.1 Mask leakage
g. 3.3.4 Filter mount
h. 3.5.8.1 Drop / rough handling
5. Sampling shall be in accordance with MIL-STD-1916. When verification levels are specified for selection of sample sizes and acceptance criteria, the attributes sampling plan of MIL-STD-1916 shall apply unless otherwise specified.
6. The government shall provide GFP upon request.
| 5120-01-615-6257 |
| 1. NSN 5120-01-615-6257 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5, and associated part number 72004/6. |
2. The valve cassette assembly shall be free from imperfections such as pits, bubbles, holes, cracks, blisters, shorts, nicks, jagged edges, or distortion, and contaminations such as grease, oil and dirt.
3. The outlet valve disk shall be free from imperfections such as pits, bumps, holes, porosity, cracks, cheeks, blisters, distortion, damage such as abrasions, rips, tears, and punctures, and contaminations such as grease, oil and dirt.
4. Exhalation Breathing Resistance. The valve cassette assembly shall maintain an exhalation breathing resistance of no greater than 20 mm of water at 85 Lpm in a negative pressure mode and 50 -4/+6 mm of water at 85 Lpm in a positive pressure mode. The positive pressure mode cracking pressure shall be 40 -4/+6 mm of water at 2 Lpm. Conformance inspection sampling shall be in accordance with MIL-STD-1916, VL-II.
5. Outlet Valve Leakage shall not be greater than 15 ccm at a positive static pressure of 1.0 inches of water from outside the mask. Conformance inspection sampling shall be 100%.
6. The First Article inspection shall consist of 35 valve cassette assemblies visually inspected for imperfections, as described in #2 and #3, and tested for Exhalation Breathing Resistance (#4) and Outlet Valve Leakage (#5). First Article tests/inspections are nondestructive.
7. Exhalation Breathing Resistance and Outlet Valve Leakage testing shall be conducted with the valve cassette assembly assembled to an M53/M53A1 facepiece.
8. Unless otherwise instructed, this item shall be packaged in accordance with Special Packaging Instruction (SPI) P72004_6.
| 5331-01-529-8369 |
| 1. NSN 5331-01-529-8369 shall be procured sole-source from Avon Protection Systems, CAGE 1LEW5 |
2. NSN 5331-01-529-8369 shall be tested and inspected in accordance with QAP72004_5_7.
3. Unless otherwise instructed, when packaging NSN 5331-01-529-8369 for delivery to the Government as a contract line item use SPI P72004_5_7.
| 4820-01-530-1000 |
| 1. NSN 4820-01-530-1000 shall be procured sole-source from Avon protection Systems, CAGE 1LEW5, and associated part number 70005/29. |
2. Include FAT local clause.
File details come from the government source that posted it. Updated .