Attachement 4 SRS Special Requirements and Badge Request Process.pdf
PDF 1 MB Posted
- Attached to
- Fence Boundary Maintenance and Emergency Repair
- Solicitation number
- 12444124Q0100
About this file
This document is a set of Special Contract Requirements for contractors and vendors performing work at the Savannah River Site (SRS), a restricted-access government facility. Key details include:
The contractor must comply with site access, security, and safety requirements. This includes attending mandatory General Employee Training (GET), obtaining a security badge, following site regulations, and providing personal protective equipment for workers. There are specific requirements for deliveries, hours of operation, handling hazardous materials, and managing equipment/vehicles on site. The contractor is responsible for safety, environmental protection, and site cleanup. The document outlines prohibited items, insurance requirements, and procedures for lost security badges. It also addresses suspension of work, criminal liability, and motorcycle helmet requirements. The overall scope of work is not provided, but this document establishes the special terms and conditions for performing any contract at the Savannah River Site.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL CONTRACT REQUIREMENTS
FOR SAVANNAH RIVER SITE
Table of Contents
IN THE EVENT OF AN EMERGENCY/ACCIDENT
SITE ACCESS AUTHORIZATION FOR CONTRACTOR AND EMPLOYEES
SECURITY AND ACCESS INFORMATION FOR DELIVERIES MADE TO THE SITE
HOURS OF OPERATION
RECEIVING INFORMATION:
COMPLIANCE WITH AREA REGULATIONS
SAFETY AND HEALTH
Operating supplies and maintenance responsibilities:
Protection of streams, lakes, and reservoirs:
Erosion:
Final cleanup:
Area cleanup:
Contractor Equipment, Vehicles, and Supply Storage on the Unit:
Liabilities:
Fire protection:
QUARANTINE RESTRICTIONS
REQUIRED INSURANCE
LOSS OF SECURITY BADGES
MOTORCYCLE HELMETS
CRIMINAL LIABILITY
SUSPENSION OF WORK
SAFETY REQUIREMENTS
PERSONAL PROTECTIVE EQUIPMENT
ATTACHMENT A – Badge Request Process
ATTACHMENT B – Listed Forms of Identification for Badging - Need two forms of identification. ..... Error!
Bookmark not defined.
ATTACHMENT C – OSR Form 10-302 ............................................................. Error! Bookmark not defined.
IN THE EVENT OF AN EMERGENCY/ACCIDENT
Contact USDA Forest Service Dispatch (803-725-0780 or 803-725-3891), if after hours contact
SRSOC (803-725-3911) first. This applies to ALL CONTRACTORS, SUBCONTRACTORS AND VENDORS working or making deliveries for awarded contracts of USDA Forest Service - Savannah River. Once USDA Forest Service Dispatch or SRSOC has been contacted, contact prime contractor’s contract representative (CR) and the contracting officer representative (COR) of contract. The prime contractor is responsible to inform all subcontractors and vendors of this requirement and that the requested work is for the Forest Service. The prime contractor is also responsible to ensure that the subcontractor and vendors always adhere to all safety protocols, site specific safety plan, including posted speed limits.
USDA Forest Service Dispatch hours are 7 days a week, 0700-1730, unless notified otherwise.
SITE ACCESS AUTHORIZATION FOR CONTRACTOR AND EMPLOYEES
The Savannah River Site (SRS) is a restricted access government facility. Badge requests must be submitted 1-2 weeks before the anticipated entry to the Site. Security badge requests for non-U.S.
citizens can take 30 days or more to be processed. Please plan accordingly.
Contractors and Subcontractors are required to attend Category A General Employee Training (GET A) Online if they have not taken this training in the past 12 months. GET A training is an orientation for personnel who will work at the Savannah River Site for more than ten consecutive days in the given year. Full GET Category A (GET A) Online is for permanently badged Site Employees (includes Contractor and Subcontractors). The GET2 Classroom training is Required for all truck drivers and delivery drivers.
GET2 Classroom is taught at 703-47-A EVERY OTHER Tuesday only.
After the contract is awarded, the Contracting Officer's Representative (COR) will coordinate the scheduling for the GET training. The COR will provide the badge forms to the Contractor and will answer questions concerning completing the forms and the GET training. The Contractor/Subcontractor must complete the badge form for each employee and submit forms to the COR no later than Monday of the week before the anticipated GET training.
GET A training is given every Tuesday morning at 8:00 AM in Building 703-41A (See Attachment A). After passing the GETA exam, personnel can obtain their SRS access badge at the SRS Badge Office, Building 703-46A. Personnel must bring two forms of identification (see Attachment B) and proof that the person successfully passed the GET training exam.
Individuals will be background-checked, and the following will be denied access to SRS:
1. Currently on probation or parole for a felony (determined by the state where the conviction occurred).
2. Any applicant for employment at SRS who received a positive drug screen.
3. Any employee who was assigned by his employer to work at the SRS and was fired for possession, trafficking or use of illegal drugs or for being under the influence of drugs while at SRS.
4. Any employee who has been fired or quit to avoid being fired from any employment for violation of a contractor or subcontractor policy on the use or abuse of illegal drugs.
5. Any employee who has been denied a DOE access authorization (security clearance) pursuant to the procedures of 10 CFR 710 administrative review.
6. Individuals who have been involuntarily terminated or have voluntarily terminated to avoid involuntary termination from any employment for theft of Government property at the SRS or for a willful violation of contractor policies or security regulations which may jeopardize the security of site operations or the health and safety of other employees or the public.
7. Any employee who has been fired or quit to avoid being fired from any employment at the SRS for theft of property.
The Contractor or their representative will be notified of employees that are denied access to SRS;
immediately upon notification, the Contractor must remove the employee(s) from SRS and return the site access badge(s) to the COR. The Contractor is responsible for replacing employee(s) who have been denied access to SRS and denial of access of Contractor's employee(s) must not be construed as a suitable excuse for nonperformance of the contract. If the contractor is denied access to SRS, the contract may be terminated for default. Failure of the Contractor to promptly remove employee(s) who were denied access and surrender their site access badges to the COR may result in termination for default.
SECURITY AND ACCESS INFORMATION FOR DELIVERIES MADE TO THE SITE
All deliveries must enter through SC State Highway 19 Aiken/New Ellenton Savannah River Site security entrance barricade. Delivery personnel must have access to all compartments of the delivery vehicle and allow security personnel to search the vehicle. Contractors must have their security badge to enter the Site. In order to obtain a security badge, the contractor will receive a general visitor/contractor safety/security briefing at the 703-46A SRS badge office. Badge processing will take at least 1-2 hours. The SRS badge office hours are 06:30 AM –3:00PM Monday through Friday, and closed from 11:15 AM to 12:00 PM (lunchtime) every day and closed on all Federal Observed holidays. Briefing is delivered via touch screen computer stations in the badge office. Contractors can also receive a safety/security briefing via a hard copy checklist and manual log at the Aiken/New Ellenton barricade. If applicable, hazard-specific checklists for high and medium hazard work will be utilized and will be subject to focused observations, as appropriate.
The following are prohibited items on the SRS:
Weapons; firearms and simulated firearms; ammunition or incendiary devices except for emergency road flares; explosive materials and devices such as firecrackers; narcotics, illegal drugs, and drug paraphernalia; alcoholic beverages to include non-alcoholic beer; chemical irritants except for small containers of mace carried for personal protection; and stun guns.
In part of the SRS point of entry procedures, the contractor is required to give a 3-day notice of delivery and provide to designated Forest Service personnel, the cargo delivery driver's name and company's name, social security number and a fax copy of his/her driver's license. The driver should bring two forms of identification (one must be a picture ID) for the badge issuance. Drivers must be a Citizen of the United States and cannot be parolees or a convicted felon. Former SRS employees removed for cause are denied entry to SRS. Delays and/or costs associated with the use of drivers failing to meet these qualifications or for failure to follow the procedures indicated will be borne by the contractor.
HOURS OF OPERATION
Operating Hours are 07:00 AM to 05:00 PM, Monday to Friday. The contractor must perform services required under this contract during normal operating hours excluding the following Federal Holidays:
New Year's Day, January 1 Martin Luther King's Birthday, 3rd Monday in January President's Day, 3rd Monday in February Memorial Day, last Monday in May Juneteenth, June 19 Independence Day, July 4 Labor Day, 1st Monday in September Columbus Day, 2nd Monday in October Veteran's Day, November 11 Thanksgiving Day, 4th Thursday in November Christmas Day, December 25
RECEIVING INFORMATION:
Normal receiving hours for the USDA Forest Service-Savannah River, located 1 mile inside the Aiken/New Ellenton barricade are 09:00 AM to 03:00 PM, Monday to Friday, except for Federally recognized holidays. Trucks arriving after these indicated hours will be turned away unless prior arrangements have been made with the point of contact. The Contractor must pack and mark the shipment in conformance with the carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, and is responsible for the loss and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee and all charges to the specified point of delivery. Failure to pass receipt inspection may result in material being returned to the Contractor. The Contractor must be capable of off-loading material. No loading dock is available.
COMPLIANCE WITH AREA REGULATIONS
The Contractor must comply with all security and safety regulations and requirements of the Government. The Contractor is responsible for maintaining satisfactory standards of employee competency, conduct, and integrity and is responsible for taking disciplinary action with respect to employees as necessary. The Government reserves the right to require the Contractor to remove any employee whose continued employment is deemed by the Government to be contrary to the public interest. The Contractor must designate a representative authorized to receive any notices and instructions given by the Contracting Officer on behalf of the Contractor regarding performance under this contract and to take such action thereon as is required by the terms of this contract.
The Contractor further agrees that only personnel possessing a valid state driver's license will be permitted to operate motor vehicles engaged in the performance of this contract upon the roads of the SRS. Failure to furnish evidence of such license for an employee driver will result in the employee being denied access to the SRS. The Contractor and all employee drivers must comply with all applicable state traffic laws on SRS (i.e., speeding).
SAFETY AND HEALTH
The contractor must take all reasonable precautions in performing work under this contract to protect the safety and health of employees, subcontractors, and members of the public and must meet or exceed all applicable safety and health regulations and requirements of the Department of Energy, OSHA 29 CFR 1910 (General Industry) or 29 CFR 1926 (Construction) (including reporting) whichever is applicable, and the USDA Forest Service.
Contractor agrees to cooperate with the Contracting Officer, Forest Service, and DOE personnel to inspect activities safely and economically under this contract and to conduct their official duties on the contract site and such other places on the SRS where the Contractor, employees, and subcontractors conduct operations under this contract. The Contracting Officer must notify the Contractor, in writing, of any noncompliance with the provisions of this clause and the corrective action to be taken. Upon receipt of such notice, the Contractor must immediately take such corrective action. If the Contractor fails to comply with said regulations or requirements, the Contracting Officer may, without prejudice to any other legal or contractual rights, issue an order to stop all or any part of the work; thereafter a start order for resumption of the work may be issued at the discretion of the Contracting Officer. The Contractor must make no claim for an extension of time or for compensation of damage by reason of or in connection with such work stoppage. In the absence of the Contracting Officer, the COR, or any DOE or Government employee has the authority to stop all or any part of the work being conducted by the Contractor if it is determined that any unsafe condition is occurring that threatens life or limb. If such action is taken, the Government employee must notify the Contracting Officer or COR immediately. If the COR is at the work site, the Government employee must promptly notify the COR of the action taken and the unsafe condition observed. The resulting formal contract action will be directed by the Contracting Officer.
Operating supplies and maintenance responsibilities:
Contractor must furnish all fuel, oil, grease, and repairs. Contractor must pay all incidental expenses to operate their equipment. The Contractor is responsible to clean up own spillage of fuel, oil, grease and remove from Site at no additional cost to the Government. Changing oil (vehicles/equipment) on site is not permitted.
Protection of streams, lakes, and reservoirs:
Contractor must take sufficient precautions to prevent pollutions of streams, lakes and reservoirs by fuels, oils and other chemicals, silt, or other harmful materials. Contractor must schedule and conduct contract in such a manner to avoid silting of streams, lakes and reservoirs, and loss of embankment materials during high flow periods. All streams must be kept free of contractor-generated debris.
Erosion:
Contractor must take every precaution necessary to prevent soil erosion in contract areas and access facilities, including but not limited to installing and/or maintaining drainage dips and water bars on roads and trails, out sloping and re-vegetation of areas disturbed by Contractor's operations.
Final cleanup:
Before final acceptance all trash, rubbish, spills, and debris generated by Contractor's operation must be removed from DOE land.
Area cleanup:
Contractor must be responsible for the housekeeping of Contractor's employees and any approved subcontractors working under this contract. Roads, rights-of-way, timber stands, and general areas must be kept free of disabled or abandoned vehicles and equipment, part of vehicles or equipment, fuel, oil, beverage and lunch containers, and other debris resulting from Contractor's operations. Contractor must be responsible for the cleanup of all spills of any amount of petroleum products (i.e., diesel, oil, and coolant). This includes excavation and proper disposal of contaminated soils in a certified landfill or contaminated soil disposal facility. Contractor must provide documented proof of such disposal.
Contractor Equipment, Vehicles, and Supply Storage on the Unit:
Prime contractor is responsible for notifying subcontractors and vendors that all vehicles and equipment must be free from maintenance issues and all repairs needed to be road worthy before entering Savannah River Site.
Contractor equipment, vehicles, and supply storage in operable condition may be left on site for the duration of an active contract and for gaps of 30 days or less for consecutive contract work – all equipment, vehicles, and supply storage must be removed upon the conclusion of the last sequential award. Contractor equipment, vehicles, and supply storage with no active contract are not permitted to be left on site for more than 30 days.
Refueling tanks should follow the Site Manual 3Q 2.4 provided by COR and documentation must explicitly state; 1) whether secondary containment is required; 2) whether the refueling tank must be on a trailer or on wheels; 3) for refueling tanks on a trailer/wheel, whether the refueling tank need a Spill Prevention Control and Countermeasure (SPCC) plan.
Contractors must keep the storage area clean, and avoid of any safety issues. Government Furnished Property (GFP) must be accounted for and cared for in a manner that does not cause damage.
All unused materials and supplies of the contractor must be removed by the contractor upon completion of work unless agreed otherwise with the Government.
Liabilities:
Contractor is responsible and liable for all damage to persons or property incurred in or resulting from Contractor's negligence and/or willful acts in conducting the operations required under this contract.
Contractor must hold the Government harmless for any damages to property and/or injury to persons which may arise or result from the operations required hereof.
Fire protection:
Gasoline or diesel-powered equipment must be equipped with satisfactory mufflers or spark arrestors. Contractor will not be allowed to start any warming fires on the SRS and agrees to reimburse the Government for the cost of fire suppression incurred as the result of Contractor's negligence and/or willful acts. All operations on the SRS may be suspended by the Contracting Officer during periods of extreme fire danger as determined by the Forest Service-Savannah River's Fire Department or when ongoing fires warrant such suspension. Such suspension must be taken in affect by written notice to the Contractor except in cases of sudden emergency when such notice may be given verbally. In the event of such suspension, the Contractor agrees to remove all personnel and equipment immediately as requested by the Contracting Officer. The Government will not be liable for any damages or claims of any nature resulting from suspension.
QUARANTINE RESTRICTIONS
The Department of Energy's Savannah River Site is infected with imported fire ants and is under quarantine; therefore, the Contractor must comply with U.S. Department of Agriculture (USDA) and South Carolina Plant Pest Regulatory Service restrictions to prevent the spread of the fire ants until they can be eliminated.
Quarantine restrictions apply to movement of articles that may carry fire ants, such as, used soil moving equipment, soil plants with roots, grass sod, and hay and straw except hay and straw used for bedding and packing. The restrictions are imposed on the movement of the regulated articles from an infested area to non-infested areas. Movement of the regulated articles within the infested areas is not restricted. Geographical areas under quarantine for imported fire ants are shown on an Attachment in Section J.
Cleaning and processing procedures are required before moving restricted material to a non-infested area. Earth moving equipment must be cleaned of all loose non-compacted soil before moving.
Facilities are available for this cleaning at the Savannah River Site.
Restricted material must contain a certification from the USDA Animal and Plant Inspection Service (APHIS) that the material is pest free before moving from an infested to a non-infested area.
Additional information may be obtained from the Forest Service-Savannah River (803)725-2441, or the USDA, APHIS, PPQ, P.O. Box 21792, Columbia, SC 29221, (803)765-5901.
REQUIRED INSURANCE
In accordance with FAR 52.228-05 Insurance - Work on a Government Installation, the following information on required insurance levels is provided.
Workmen's Compensation and Employer's Liability Insurance that provides coverage for employees:
Working in the State of South Carolina (if required by law) General Liability Insurance;
Bodily Injury Liability $100,000.00 Minimum per occurrence $500,000.00
Automobile Liability Insurance;
Minimum per person $300,000.00 Minimum per occurrence for bodily injury $300,000.00 Minimum per occurrence for property damage $300,000.00
LOSS OF SECURITY BADGES
Security badges are issued to the Contractor and each of the contractor's employees to allow them access to SRS. When a security badge is lost or misplaced the Contractor, or the Contractor Representative must report the loss to the COR immediately and obtain a replacement badge for the lost or misplaced badge.
Regardless of the expiration date printed on the badge has passed or not, security badge holders must complete the annual safety and safeguards training every year in December and the CAT training every year in January for the security badge to comply. For contractor and subcontractor employees who no longer work with the Contractor/Subcontractor, their security badges must be collected and returned to SRS badge office; Contractor is responsible to collect proof of returned badges from the badge office and provide such proof to the COR.
Upon completion of the contract, all security badges must be returned to the Government. A deduction of $10 will be made on the final payment for each security badge that is not returned. Final payments will not be processed until all security badges are either returned to the Government or reported lost to the SRS badge Office. When security badge(s) are determined to be lost prior to final payment appropriate deductions will be made from the final payment for this contract.
MOTORCYCLE HELMETS
Any person operating a motorcycle within the boundaries of Savannah River Site is required to wear a DOT approved helmet. This includes any 2, 3, or 4 wheeled type motorcycles. Motorcyclists can still operate their motorcycles without a helmet on the three public ally accessible highways, like 125.
Motorcyclists will be turned away at the barricades.
CRIMINAL LIABILITY
It is understood that disclosure of any classified information relating to the work or services ordered hereunder to any person not entitled to receive it or failure to safeguard any classified information that may come to the USFS or any person under the USFS control in connection with work under this Agreement, may subject USFS, its agents, employees, or subcontractors to criminal liability under the laws of the United States. (See the Atomic Energy Act of 1954, as amended, 42 U.S.C. 2011 et seq.; 18 U.S.C. 793 and 794; and Executive Order 12356)
SUSPENSION OF WORK
The Department of Energy operates the Savannah River Site. The Contracting Officer may order the Contractor to suspend or delay work due to safety, security and other reasons. FAR Clause 52.242-14 terms and conditions will apply if a work suspension/delay is ordered by the Contracting Officer.
SAFETY REQUIREMENTS
The Contractor must furnish all necessary personnel, material, equipment, services, supervision, transportation, and supplies (unless specified otherwise) to perform the statement of work/specifications.
The Contractor must supply the following safety items, but limited to, and ensure the use of them as required for the duration of this contract. The Contractor must be responsible for complying with OSHA 29 CFR 1910 General Industry and 29 CFR 1926 Construction, as applicable for work being performed.
A. Rolling stock equipment - All equipment in use with this contract must meet OSHA standards. Rollover protection must be labeled as follows:
1. Manufacturer's or fabricator's name and address
2. ROPS model number, if any
3. Dozer make, model, or series number that the structure is designed to fit
4. ROPS model was tested in accordance with the requirements of OSHA subpart 1928.52.
B. Personal Protective Equipment (PPE) - Contractor must provide the following PPE, as needed, to include documented training on the use and care of:
1. Hardhats
2. Eye protection
3. Hearing protection
4. 8" safety boots
5. Respirators (as needed)
6. Chainsaw chaps (when using chainsaws)
C. Other safety equipment/supplies
1. Fire extinguisher (5 lb. ABC type) on each piece of equipment.
2. Seatbelts on equipment
3. Communication site (2-way radio, CB or cellular phone with site alphanumeric pager) at each worksite at all times
4. First aid kit (clean and serviceable) at each worksite at all times
5. Back-up alarms (on heavy equipment with rear vision obstructed)
D. Portable Fuel Tank
1. Proper venting
2. Self-closing dispenser
3. "NO SMOKING" and "DIESEL" or "GASOLINE" signs affixed and clearly visible.
4. Safety fuel cans labeled and serviceable.
E. Contractor must have a written comprehensive Safety Plan as well as a Job Hazard Analysis (JHA) that will address the specific hazards and controls for each phase of the work. A copy of both the Safety Plan and JHA's must be provided to the COR and Safety Manager/Specialist a minimum of 5 working days prior to starting work and be available at each work site.
F. Contractor must have a written Hazard Communications, and Bloodborne Pathogen Plans available at each worksite. Plans should include documented training for each crew member. The Hazard Communication Plan shall include current material safety data sheets (MSDS) for each chemical in use.
In addition, as required by OSHA regulations, at least one supervising crew member shall have up to date certified First Aid and CPR training. It is strongly recommended to have an individual trained in First Aid and CPR even if not required by OSHA, for work conducted in remote locations. Be prepared to provide the Safety Plan, JHA, Hazard Communications, and Bloodborne Pathogen Plan to post award conference.
PERSONAL PROTECTIVE EQUIPMENT
A. Contractor must train all workers using equipment the safe operation and use of equipment.
B. Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities must be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards or processes encountered in a manner capable of causing injury or impairment in the function of any part of the body.
C. Defective or damaged personal protective equipment must not be used.
D. The contractor must provide, at no cost to the employee, to each employee who operates a chain saw, chain saw chaps and assure the chaps are worn during saw operations. These chaps must be approved by National Fire Protection Association Standard (NFPA) 1977: Standard on Protective Clothing and Equipment for Wildland Fire Fighting and Urban Interface Fire Fighting (Interagency Standards for Fire and Fire Aviation Operations, 2024, Chapter 7, pg. 107, https://www.nifc.gov/sites/default/files/redbook-files/RedBook_Final.pdf). The chaps must cover the full length of the thigh to the top of the boot on each leg.
E. The contractor must assure that each employee wears foot protection that provides adequate traction and ankle support. Employees operating chain saws must wear foot protection that is constructed with cut-resistant material which will protect the employee against contact with a running chain saw.
F. The contractor must provide, at no cost to the employee, and assure that each employee who works in an area where there is potential for head injury from falling objects or flying objects wears a hard hat that meets the minimum requirements of American National Standards Institute (ANSI) standard 289.1-1997 unless during chainsaw operations, the helmet must meet the NFPA 1977 Chapter 5.2
G. The contractor must provide, at no cost to the employee, eye protection where there is potential for eye injury due to flying objects. This eye protection must meet the minimum requirements of ANSI standard 287.1-2003.
H. The contractor must provide, at no cost to the employee, hearing protection where there is a potential for hearing loss due to high intensity noise e.g., chain saw operation.
I. For discrepancies between SRS and Forest Service Safety standards, the stricter standards shall apply.
https://www.nifc.gov/sites/default/files/redbook-files/RedBook_Final.pdf
ATTACHMENT A – Badge Request Process
Continue to Next Page
Forest Service Savannah River Site Badge Request for EES Contractors
Badge Request Form Web Link https://forms.office.com/g/UsRLw0LdtG
Subcontractor or New Employee Badge Request: Submit at least 2 weeks prior to the proposed date needed in order to allow sufficient time for review, scheduling of GET training and approval.
Visitor Badge Request: Submit at least 5 days prior to the proposed date needed in order to allow sufficient time for review, approval, and processing.
Savannah River Site Home page - https://www.srs.gov/general/srs-home.html General Employee Training (GET): https://cat.srs.gov/GET/ Consolidated Annual Training (CAT): https://cat.srs.gov/cat/CatLauncher.html Safeguards and Security Annual Refresher: https://cat.srs.gov/TRGSEC24/
Turning in Badge: Employees/subcontractors must process out through the SRS Badge Office on the last day Site access is required. If the last day of Site access occurs when the SRS Badge Office is closed, the badge must be retrieved by Manager or Subcontract Technical Representative and returned to the Badge Office on the next business day. If an employee’s badge is not recovered or forms are not received within two weeks of last day of site access, the badge must be treated as stolen Government property, resulting in Site Access Authorization Denial (SAAD) enrollment. SAAD enrollment will be effective for a minimum of one year, or until the badge is recovered from the employee and returned to the SRS Badge Office. SAAD removal is not automatic after one year but must be approved by the Federal Cognizant Security Office (currently DOE-SR). Subsequent rebadging will be denied until all required actions are complete.
https://forms.office.com/g/UsRLw0LdtG https://www.srs.gov/general/srs-home.html https://cat.srs.gov/GET/ https://cat.srs.gov/cat/CatLauncher.html https://cat.srs.gov/TRGSEC24/
Name (Last, First M): Enter full name as on Driver’s License, including suffix (Sr., Jr., I, III).
Have you ever had a DOE SRS badge:
No: for first time badging, expired badge, been two years since being on Site, or getting visitor badge.
Yes: two year or less working on Site and/or have an expiring badge.
What is your DOE ID: on top on the white-photo badge with a barcode, one letter and four digits.
USDA Savannah River Badge request type:
Contractors: Visitor Site Badge (10 days or less) or Subcontractor Site Badge
Company name you work for: Click “Other” and enter company name
– CMM, Pyramid, Dukes, Today Tomorrow Enterprise, Gold Mech Services, etc.
* Government issues PIV Card (HSOD-12): for those currently employed with a federal agency.
Company Address: Please enter company address.
Company phone number: Please enter company phone number.
Are you a truck/delivery driver (including logger trucks): Yes/No
Type of DOE Badge Requesting: Visitor badge (10 days or less) or Subcontractor (11 days or more)
Program you will be working for: Engineering
COR or Program Manager you are working for: Jeremy Prince, Ron Moseley, Travis McCullough, or Willie Holston
Purpose of your visit: Brief purpose of your visit to Site
Your Home Address: please provide accurate information.
Your Telephone Number (ex (XXXX) XXX-XXXX): please provide accurate information.
Your email address: please provide accurate information.
Your Date of Birth (ex. 01/01/1980): please provide accurate information.
You a United States Citizen: Yes/No
Social Security Number (ex. 555-55-5555): please provide accurate information.
Confirm Social Security Number: please provide accurate information.
General Employee Training Needed (GET): YES Regardless of current badge status
Access Date to Site (ex. 01/01/1980): enter the date you plan to start work.
Tentative Planned Exit Dates (ex. 01/01/1980): enter the date you plan to end work (cannot exceed one year from start date)
WHAT TO EXPECT AT THE BADGE OFFICE
Badge Office hours of operation are Monday - Friday, 6:30 a.m.-3 p.m. The office will be closed each day 11:15 am – noon. (Closed on all site-approved holidays).
(Your site contact should give you direction on when to go to the badge office and/or Site Medical)
Badge Office “Waitwhile” Queuing System
1. Waitlist Check- In Link: https://waitwhile.com/welcome/srs-kiosk
2. Upon reporting to the badge office, please sign into Waitwhile via your personal device or the iPads available inside the Badge Office lobby.
3. Upon check in, you will be served as soon as possible.
4. You may wait in the lobby or in your vehicle until it is your turn to be served.
5. Please be aware that large bags are not allowed inside the Badge Office lobby.
Contacts
Phone Number: BADGE (2-2343) [if you are off-site dial
(803) 952-2343]
Prompt 1: Badging Office – badgeoffice@srs.gov
Directions: Access to SRS is restricted to badged personnel only. In most cases, a visit to SRS or Savannah River National Laboratory (SRNL) starts at the SRS Badge Office - located in Building 703-46A (just off of SRS Road 1). See map below. For more precise directions input 33°20’39.8”N 81°44’28.3”W into your GPS or preferred internet map service or visit www.srs.gov to download directions and maps
Savannah River Site mailto:badgeoffice@srs.gov http://www.srs.gov/
BADGING REQUIREMENTS
To be badged for entry to Savannah River Site, individuals must present ONE of the following identification documents:
• U. S. Passport or U. S. Passport Card.
• REAL ID-compliant Driver’s License or Identification Card
• Enhanced Driver’s License
• HSPD-12 PIV Card
• Department of Defense (DoD) Common Access Card (CAC) – Except CACs with blue bar
OR a combination of one selection from List B AND one selection from List C below:
∗ Driver’s licenses and ID cards from compliant, extension, and grace period states are acceptable.
∗ If a state is deemed noncompliant, driver’s licenses and ID cards from that state WILL NOT be accepted to establish identity (List B).
However, if other documents presented do not include a photograph (for example, combination of voter’s registration card and Social Security card), driver’s license or ID card from non-compliant state may be presented for facial recognition.
At least one document, issued by a state or Federal agency, must include the individual’s name and a photograph to establish facial recognition.
• All documents must bear the same name.
• All documents must be originals or certified copies; photocopies will not be accepted.
• All document must be unaltered.
• All documents must be unexpired.
Please note: To complete an HSPD-12 enrollment, two forms of identification are required despite single forms being acceptable for site specific badging.
HSPD-12 enrollment is required for DOE/National Nuclear Security Administration {NNSA) contractors, and subcontractors who require long-term {greater than six months) physical and logical access to DOE/NNSA resources. Please see below for US ACCESS acceptable forms of ID for HSPD-12 enrollment.
LIST B LIST C
Documents that Establish AND Documents that Establish
Identity Employment Authorization
1. Driver's license or ID card issued by a State or outlying possession of the United States provided it contains a photograph or information such as name, date of birth, gender, height, eye color, and address
2. ID card issued by federal, state or local government agencies or entities, provided it contains a photograph or information such as name, date of birth, gender, height, eye color, and address
1. A Social Security Account Number card, unless the card includes one of the following restrictions:
(1) NOT VALID FOR EMPLOYMENT
(2) VALIDFORWORKONLYWITH INS
AUTHORIZATION
(3) VALIDFORWORKONLYWITH DHS
AUTHORIZATION
2. Certification Birth Abroad issued by the Department of State (Form FS-545)
3. Certification of report of birth issued by the Department of State (Form DS-1350)
3. School ID card with a photograph
4. Original or certified copy of birth certificate issued by a State, county, municipal authority, or territory of the United States bearing an official seal
4. Voter's registration card
5. U.S. Military card or draft record
6. Military dependent's ID card
5. Native American tribal document
7. U.S. Coast Guard Merchant Mariner Card
6. U.S. Citizen ID Card (Form I-197)
8. Native American tribal document 7. Identification Card for Use of Resident Citizen in the United States (Form I- 179)
9. Driver's license issued by a Canadian government authority
For persons under age 18 who are unable to present a document listed above:
8. Employment authorization document issued by the Department of Homeland Security
10. School record or report card
11. Clinic, doctor, or hospital record
12. Day-care or nursery school record
Acceptable Forms of ID
You must have two physical and current forms of identification: at least one must be a primary form of ID.
If the names on your forms of ID do not match, you may need to bring the appropriate linking documentation, such as a marriage license or court order, that shows the change in names. If your name will soon change, contact your sponsor to learn what to do.
Primary Form You can bring two of these, but you must have at least one:
• U.S. passport or passport card.
• Permanent resident card or alien registration receipt card (Form I-551).
• Foreign passport.
• Employment authorization document with a photo (Form I-776).
• State-issued driver's license or ID.
• State-issued photo ID card.
• U.S. military ID card.
• U.S. military dependent’s ID card.
• PIV card.
Secondary Form Bring one of these unless you have two primary forms.
• U.S. Social Security card (not laminated).
• Original or certified copy of a birth certificate issued by a state, county, municipal authority, or outlying possession of the United States with an official seal.
• Voter registration card.
• U.S. Coast Guard Merchant Mariner card.
• Certificate of U.S. citizenship (Form N-560 or N-561).
• Certificate of naturalization (Form N-550 or N-570).
• U.S. citizen ID card (Form I-197).
• ID card for use by a resident citizen in the United States (Form I-179).
• Certification of birth abroad or certification of report of birth issued by the Department of State (Form F-
545 or Form DS-1350).
• Employment authorization document issued by Department of Homeland Security (Form I-766).
• Driver's license issued by a Canadian government entity.
• Native American tribal document.
• Veteran Health Identification Card.
• Agency ID badge issued by federal, state, or local government agency or entity with a photo — not a facility access badge.
• Another piece of evidence that meets the requirements of SP 800-63A [PDF].
You cannot complete your appointment if you do not have the appropriate documents with you. An expired form of ID (including your PIV card) is not acceptable for either enrollment or activation appointments.
Unacceptable Forms Identity documents that will not be accepted include:
• Student ID card (from any university).
• Company ID card.
• Gun or firearms permit.
• License to carry.
• Hunting or fishing permit.
• Facility badge.
• Temporary driver’s licenses.
• Selective service card.
• Foreign driver’s license (other than Canada).
• Library card.
• Temporary PIV card.
• Marriage license (but this can be shown when there are different names on a birth certificate and a current driver’s license, for example).
Examples
Primary Secondary Result State driver’s license U.S. Social Security card Acceptable U.S. passport State driver’s license Acceptable U.S. military ID card Department of State ID card Acceptable U.S. Social Security card Voter registration card Unacceptable (no primary form) State driver’s license State ID card Unacceptable (driver’s license or ID card is one primary form) Expired PIV card State driver’s license Unacceptable (none can be expired)
Linking documents
Linking documents, such as a marriage license or divorce decree, must contain both the previous and current names.
Primary Secondary Linking document Result
State driver’s license with maiden name
U.S. military dependent ID card with married name
Marriage license with both names on it
Acceptable
U.S. passport with married name
State driver’s license with maiden name
Court record linking the two names
Acceptable
Prohibited Articles (Manual 7Q, Procedure 312)
The following are considered prohibited articles and are prohibited at SRS and its facilities unless in the possession of a person with a valid pass:
• ALL firearms (Exception: shotguns belonging to hunters who have been issued SRS hunt permits and are participating in authorized hunts and those approved by DOE) − Firearms are not allowed on any part of the Federal property at SRS. This includes the General Site
PPA of the Aiken and Augusta Parking lots in the 700 Area, even if the owner is in possession of a valid state issued Concealed Carry Permit (CCP). Firearms are prohibited on SRS
• Simulated firearms [Exception: obvious children’s toys determined by the Protective Force (PF) supervisor]
• Potential weapons (i.e., cross-bows, bows and arrows, sling-shots, martial arts weapons such as billy clubs or nunchakus, machetes, butterfly knives, other fixed-blade knives not intended as eating utensils or required in the performance of duty, and personal knives with blades greater than or equal to (>) 2 1/2" inches in length)
• Ammunition, gun powder (Exception: empty or fired cases) and explosives
• Incendiaries and accelerants such as gasoline/diesel fuel (not contained within factory-installed fuel tank), explosive materials and related devices (i.e., fireworks, blasting-caps)
• ALL alcoholic beverages
• Non-prescription narcotics, illegal drugs, controlled substances and drug paraphernalia or articles used in the sale, manufacture, delivery, or possession of illegal drugs. These articles include syringes with hypodermic needles, roach clips, spoons, vials and pipes designed to smoke hashish or marijuana
• Tear gas, chemical mace, and devices containing chemical agents, chloroacetophenone, orthochlorobenzalmalononitrile, or other chemical irritants [Exception: containers of two ounces or less of pepper or mace sprays carried for personal use are permitted at SRS with the exception of Material Access Areas (MAA)]
• Stun guns or Tasers (small device that generates an electric shock)
• ALL Unmanned Aerial Systems (UASs) and Unmanned Ground Systems (UGSs). This includes
Unmanned Aerial Vehicles (UAVs), drones, quadcopters, gyrocopters, remote control aircraft, model aircraft, remote controlled vehicles, robotic devices, etc.
• Synthetic Urine
• Marijuana-based products (cannabidiol (CBD) oils, lotions, creams, etc.).
To minimize delays during the vehicle inspection process, employees should check their vehicle prior to arriving at the perimeter barricades for items not required in the performance of a job on Site. Some examples include:
• Solvents
• Paint thinners
• Propane tanks
• Garden and yard tools such as garden hoes, shovels, pitchforks, digging tools, pruners, rakes, tools for watering, branch cutters, shredders, chippers, garden tools for weeding, garden trowels, garden tillers and cultivators, hedge cutters, weed-eaters, chain saws, pipes, yard brooms, electric blowers, electric trimmers, electric vacuums, and lawn mowers
• Cutting tools
• Tool boxes
• Containers and luggage
Personally-owned recreational vehicles are not allowed to enter the SRS such as:
• Boats
• Campers/travel trailers
• Motor homes/Recreational vehicles
• Cargo trailers
• ATVs
• Riding mowers
| SRS Special Requirements and Badge Request Process_2024-03 |
| IN THE EVENT OF AN EMERGENCY/ACCIDENT |
| SITE ACCESS AUTHORIZATION FOR CONTRACTOR AND EMPLOYEES |
| SECURITY AND ACCESS INFORMATION FOR DELIVERIES MADE TO THE SITE |
| HOURS OF OPERATION |
| RECEIVING INFORMATION: |
| COMPLIANCE WITH AREA REGULATIONS |
| SAFETY AND HEALTH |
| Operating supplies and maintenance responsibilities: |
| Protection of streams, lakes, and reservoirs: |
| Erosion: |
| Final cleanup: |
| Area cleanup: |
| Contractor Equipment, Vehicles, and Supply Storage on the Unit: |
| Liabilities: |
| Fire protection: |
| QUARANTINE RESTRICTIONS |
| REQUIRED INSURANCE |
| LOSS OF SECURITY BADGES |
| MOTORCYCLE HELMETS |
| CRIMINAL LIABILITY |
| SUSPENSION OF WORK |
| SAFETY REQUIREMENTS |
| PERSONAL PROTECTIVE EQUIPMENT |
| ATTACHMENT A – Badge Request Process |
| Badge Request (EES Contractors) |
| WHAT TO EXPECT AT THE BADGE OFFICE |
| (Your site contact should give you direction on when to go to the badge office and/or Site Medical) |
| Acceptable Forms of ID |
| Primary Form |
| Secondary Form |
| Unacceptable Forms |
| Examples |
File details come from the government source that posted it. Updated .