Attach(1)_Specification - Mandatory Characteristics for each item being purchased under this solicitation.pdf

2 March 2020

Specification - Mandatory Characteristics for each item being purchased under this solicitation

ITEM 0001, Safety-loader Truck with Cab Back Crane

A. GENERAL DESCRIPTION

Truck, Safety Loader, 4x2, diesel engine driven, right hand drive, payload capacity 5.0t or above, cab back crane.

Quantity: One (1) each

Vehicles shall be the newest model and year at the time of delivery and ready for use.

Vehicle and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture.

B. VEHICLE REQUIRED & CHARACTERISTICS

(1) Exterior Color: Truck - Manufacturer’s standard white color. Crane - Manufacturer’s standard color.

(2) Fuel: Diesel.

(3) Engine Displacement: Manufacturer’s standard.

(4) Seat Belt: Shall be installed on all passenger and driver seats.

(5) Transmission System: Manual or Automatic transmission.

(6) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(7) AM or AM/FM Radio with Speaker:

(8) Back Eye Camera with Monitor:

(9) Windows: Manufacturer's standard power window.

(10) Door Lock: Manufacturer's standard.

(11) Steering: Manufacturer's standard power steering.

(12) Suspension: Manufacturer's standard.

(13) Wheels: Manufacturer's standard.

(14) Electrical System: Manufacturer's standard.

(15) Air Conditioner.

(16) Heater/Defroster: Manufacturer's standard.

(17) Battery: Heavy duty battery.

(18) Key: Doors and ignitions for the vehicle shall be keyed alike.

(19) ABS: Anti-Lock Brakes, Manufacturer’s standard.

(20) Mirrors: A rear mirror in cabin and large and small side mirrors. Manufacturer’s standard.

(21) License Plates: Not required. Bolts, nuts, and washers to attach plates shall be furnished.

C. OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories Note: Shall be type installed on manufacturer's standard production model.

a. Floor Mats. Manufacturer's standard.

b. Triangle Reflector, a first aid kit.

c. Tire changing tools.

d. Wheel Chock.

e. Tire chains.

f. Weight distribution data and specific dimension diagram of the vehicle.

g. Door visor.

h. Spare tire.

i. Working Light. Two (2) working Lights on guard frame/Torii to light up loading bed. Manufacturer’s standard.

j. Chock Blocks for the floor of loading bed. Two (2) tire blocks to fix loaded items on loading bed. The tire blocks shall be able to place at least front and rear of loading bed. The locations of holes shall be recommended by manufacturer.

k. Tie-up chain. Four (4) tie-up chains to secure the loaded items.

l. Idle-up system. System for Idle-up. Manufacturer’s standard.

(2) Modifications

a. Bed size. Bed sizes should be length: minimum 6,400 mm and maximum 7,000 mm. Width:

minimum 2,250 mm and maximum 2,450.

b. Loading bed. Loading bed slides backward and the rear end connect to the ground.

c. Tailgate. The tailgate falls backward and fulfills a role as a loading ramp. The length, minimum

1,300 mm or above. Hydraulic system.

d. Floor of loading bed. Metal Floor. Heavy duty type to bear the weight from hauling of construction equipment or forklifts.

e. Retractable rear stays. When the bed is slid down, the retractable rear stays support the weight of loaded items.

f. Side gates (aori) of loading bed. The material is aluminum.

g. Crane. Cab back crane, minimum 9 meters long boom or longer when expanded. The maximum work ability 2.9 ton or above when the boom is retracted. The crane is installed behind the cabin.

h. Remote controller. Remote controller(s) for Crane and carrier (loading bed) is (are) required. Unified remote controller is preferable. The unified controller shall be operated by buttons/switches and have a display. If the separate controllers are provided, the controller for the crane shall have a display and shall be operated by buttons/switches. The wireless controller is preferable.

i. Winch. The maximum work ability 2.5 ton or above with metal wire rope and a towing hook.

j. Outrigger. Both sides.

k. Hook (Tsuribari-hook). At least two (2) hooks in front and two hooks in rear on loading bed. Manufacturer's standard

l. Torii. Panel/frame. Manufacturer's standard.

m. Rope hooks. At least fourteen (14) ea shall be installed side and rear of loading bed. (Manufacturer’s standard).

n. D-rings (Matukan-hook). At least eleven (11) ea shall be installed side and rear of loading bed.

(Manufacturer’s standard).

(3) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer.

The warranty work shall be provided by dealer(s) around Zama, Japan.

The following dealer(s) will provide the warranty work.

a. For Zama area:

Name of Firm: * _________________________________________________________________

Address: * ______________________________________________________________________

Telephone No.: * _________________________________

(*) to be inserted by contractor.

(4) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(5) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicle and two (2) set of technical (shop repair) manuals and parts catalogs to be furnished for consignee by Contractor at time of vehicle(s) delivery.

D. DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location: All transportation charges borne by the contractor, One (1) each to the delivery point:

Bldg. 645, DPW, USAG Japan, Camp Zama (Kanagawa-ken, Zama-shi) (POC is Mr. Tomono, mitsuhiro.tomono.ln@mail.mil).

(2) Date: The vehicle shall be delivered at the delivery point specified above within 400 calendar days after contract is issued

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on

Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized