Attach__No__1B_-_Rpt_PWQTRP_HJ0083.pdf

Process Waste Questionaire Technical Response Package (PWQTRP)

Waste Process Code: HJ0083 Page 1 of 3

Information Submitted By Waste Generator for PWQ#

Generator Tracking#: 22-068-003 Generator PWQ Name: Expired 03GY330CAT Curing Colution Co

Priority Routine

GeneratorComments:

Environmental Coordinator: Michael Mau

Created By: Rebecca Fafard

Udated By

Recertified By:

Generation Quantity: 1.00 Quarter

Generation Process: Expired 03GY330CAT Curing Colution Component by PPG Aerospace

Per

Chemical Physical Characteristics:

Solid: Sludge:

Gas: Aerosol: No PCB Concentration: N/A

Layers (liquids only): Single Phase

Is waste generated from cleanup, or from dilution of PCBs with an original concentration of 50 ppm or greater? No

Liquid: 100.00%

If yes, original concentration: (ppm)

Color: Odor Description: FlashPoint (if liquid): 136

SpecificGravity (if Liquid): Viscosity(of liquid): Med

PH if aqueous): N/A Is material pumpable? No

Is material explosive? No

Does material react violently with water or create toxic or flammable vapors when in contact with water? No

Does waste contain halogens? No

Does waste contain over 50% debris (manufactured object, plant or animal matter, or natural geological material) exceeding 60 mm partical size? No Does waste contain asbestos? No

Does waste contain medical sharps or infection material (biomedical waste)? No

Pints

Waste Process Code: HJ0083 Page 2 of 3

WASTE COMPOSITION

TCLP TOXICITY CHARACTERISTICS

HAZARD DETERMINATION: Regulated as a hazardous waste

OTHER REGULATORY DETERMINATION: None

SAMPLING AND ANALYSIS REQUIREMENT:

THE WASTE EVALUATION IS BASED UPON THE ABOVE WASTE DESCRIPTION. IF THE GENERATOR

CANNOT VERIFY THAT THE WASTE MATCHES THIS DESCRIPTION, ANALYSES SHOULD BE CONDUCTED FOR THE FOLLOWING PARAMETERS: FLASH POINT, TCLP METALS AND ORGANICS LESS PESTICIDES, UHC METALS

PACKAGING:

1. 5 GAL. CONTAINER - UN1A2/Y1.4/100 (MINIMUM PERFORMANCE STANDARDS OR BETTER) 2.

30/14 GAL. CONTAINER - UN1H2/Y1.4/100 (MINIMUM PERFORMANCE STANDARDS OR BETTER) 3. 55

GAL. CONTAINER - UN1A2/Y1.4/140 (MINIMUM PERFORMANCE STANDARDS OR BETTER)

Constituent Lower % Upper %

Hexamethylene diisocyant 50 75 ethyl 3-ethoxypropionate 10 20 n-butyl acetate 1 5 solvent naphtha 1 5

1,2,4-trimethylbenzene 1.4 hexamethylene di-isocyana 1

Waste Process Code: HJ0083 Page 3 of 3

DOT MARKING LABEL: Hazardous Waste (WM8)

DOT PRIMARY HAZARD: Flammable Liquid, 3 (HMSL6S)

DOT SUBSIDIARY HAZARD #1 Not Required

DOT SUBSIDIARY HAZARD #2 Not Required

DOT ADDITIONAL LABEL #1 Not Required

DOT ADDITIONAL LABEL #2

DOT PSN and UN/NA#: UN1263, Waste paint, RQ (D006, D007)

EPA Codes

Comments

GENERATOR SHOULD PLACE SMALL CONTAINERS DIRECTLY INTO A DRUM. DO NOT POUR CONTENTS OF SMALL

CONTAINERS INTO DRUM.

Date PWQ/TRP Published: 3/9/2022Mike HodgesPWQ evaluated By:

Container Marking Requirements

Date TRP Modified: 1/6/2017 10:41:19 AM

WPC2 EPA

HJ0083 D001

HJ0083 D005

HJ0083 D006

HJ0083 D007

HJ0083 D008

HJ0083 D018

HJ0083 D019

HJ0083 D035