ATT 5 DD254-FA8132-01202021-31354.pdf
PDF 555 KB Posted
- Attached to
- Next Generation Serialization Part Marking Support Federal contract opportunity
- Solicitation number
- FA813221Q0009
About this file
This document is a Department of Defense Contract Security Classification Specification form for hardware support services related to part marking activities. It requires the contractor to provide tech support, equipment maintenance, training, and reports at Tinker Air Force Base, Hill Air Force Base, Robins Air Force Base, Randolph Air Force Base, Vandenberg Air Force Base, and Kadena Air Force Base. The contractor will need access to locations that may contain classified information. The solicitation number is FA813221Q0009 and was issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. The period of performance is five years and six months from the date of review on September 30, 2026.
View the file
Other files for this federal contract opportunity
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CLASSIFICATION (When filled in):
PREVIOUS EDITION IS OBSOLETE. Page 1 of 3 AEM LiveCycle Designer
PREVIOUS EDITION IS OBSOLETE. Page 1 of 3 AEM LiveCycle Designer
DD DD FFOORMRM 252544,, APR 2018
DEPARTMENT OF DEFENSE
CONTRACT SECURITY CLASSIFICATION SPECIFICATION
(The requirements of the National Industrial Security Program (NISP) apply to all security aspects of this effort involving classified information.)
OMB No. 0704-0567 OMB approval expires: May 31, 2022
The public reporting burden for this collection of information, 0704-0567, is estimated to average 70 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-information-collections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
RETURN COMPLETED FORM AS DIRECTED IN THE INSTRUCTIONS.
1. CLEARANCE AND SAFEGUARDING
a. LEVEL OF FACILITY SECURITY CLEARANCE (FCL) REQUIRED (See Instructions)
b. LEVEL OF SAFEGUARDING FOR CLASSIFIED INFORMATION/
MATERIAL REQUIRED AT CONTRACTOR FACILITY
2. THIS SPECIFICATION IS FOR: (X and complete as applicable.)
a. PRIME CONTRACT NUMBER (See instructions.)
b. SUBCONTRACT NUMBER
c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)
3. THIS SPECIFICATION IS: (X and complete as applicable.)
a. ORIGINAL (Complete date in all cases.)
DATE (YYYYMMDD)
b. REVISED (Supersedes all previous specifications.)
REVISION NO. DATE (YYYYMMDD)
c. FINAL (Complete Item 5 in all cases.) DATE (YYYYMMDD)
4. IS THIS A FOLLOW-ON CONTRACT? No Yes If yes, complete the following:
Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.
5. IS THIS A FINAL DD FORM 254? No Yes If yes, complete the following:
In response to the contractor's request dated , retention of the classified material is authorized for the period of:
6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)
a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)
7. SUBCONTRACTOR(S)
(-- but will still require a separate DD Form 254 issued by a prime contractor to each subcontractor.)
a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)
8. ACTUAL PERFORMANCE
a. LOCATION(S) (For actual performance, see instructions.) b. CAGE CODE (If applicable, see Instructions.)
c. COGNIZANT SECURITY OFFICE(S) (CSO) (Name, Address, ZIP Code, Telephone required; Email Address optional)
9. GENERAL UNCLASSIFIED DESCRIPTION OF THIS PROCUREMENT
(Additional Performance Locations are located in block 13)
Unclassified
Unclassified
Secret None
✘ FA813221Q009
2021/01/11
Hill AFB, Hill AFB 75 ABW/IP, 75 ABW/IP7981 Georgia Ave, Bldg 1102 Hill AFB UT 84056-5825, USAF
Requirement is for hardware support services in support of part-marking activities at the locations described. In particular, services include tech support, equipment maintenance, training, and reports.
PREVIOUS EDITION IS OBSOLETE. Page 2 of 3 AEM LiveCycle Designer
PREVIOUS EDITION IS OBSOLETE. Page 2 of 3 AEM LiveCycle Designer
DD DD FFOORMRM 252544,, APR 2018
10. CONTRACTOR WILL REQUIRE ACCESS TO: (X all that apply. Provide details in Blocks 13 or 14 as set forth in the instructions.)
a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION f. SPECIAL ACCESS PROGRAM (SAP) INFORMATION
b. RESTRICTED DATA
g. NORTH ATLANTIC TREATY ORGANIZATION
(NATO) INFORMATION
c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION (CNWDI) (If CNWDI applies, RESTRICTED DATA must also be marked.)
h. FOREIGN GOVERMENT INFORMATION
d. FORMERLY RESTRICTED DATA
i. ALTERNATIVE COMPENSATORY CONTROL MEASURES
(ACCM) INFORMATION
e. NATIONAL INTELLIGENCE INFORMATION:
(1) Sensitive Compartmented Information (SCI)
(2) Non-SCI
j. CONTROLLED UNCLASSIFIED INFORMATION (CUI) (See instructions.)
k. OTHER (Specify) (See instructions.)
11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL: (X all that apply. See instructions. Provide details in Blocks 13 or 14 as set forth in the instructions.)
a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT
ANOTHER CONTRACTOR'S FACILITY OR A GOVERNMENT
ACTIVITY
(Applicable only if there is no access or storage required at contractor facility.
See instructions.)
b. RECEIVE AND STORE CLASSIFIED DOCUMENTS ONLY
c. RECEIVE, STORE, AND GENERATE CLASSIFIED
INFORMATION OR MATERIAL
d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE
e. PERFORM SERVICES ONLY
f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE
THE U.S.,PUERTO RICO, U.S. POSSESSIONS AND TRUST
TERRITORIES
g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE
TECHNICAL INFORMATION CENTER (DTIC) OR OTHER
SECONDARY DISTRIBUTION CENTER
h. REQUIRE A COMSEC ACCOUNT
i. HAVE A TEMPEST REQUIREMENT
j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS
k. BE AUTHORIZED TO USE DEFENSE COURIER SERVICE
l. RECEIVE, STORE, OR GENERATE CONTROLLED UNCLASSIFIED
INFORMATION (CUI).
(DoD Components: refer to DoDM 5200.01, Volume 4 only for specific CUI protection requirements. Non-DoD Components: see instructions.)
m. OTHER (Specify) (See instructions.)
12. PUBLIC RELEASE
Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the National Industrial Security Program Operating Manual (NISPOM) or unless it has been approved for public release by appropriate U.S. Government authority.
Proposed public releases shall be submitted for review and approval prior to release to the appropriate government approval authority identified here with at least office and phone contact information and if available, an e-mail address. (See instructions)
DIRECT THROUGH (Specify below) Public Release Authority:
13. SECURITY GUIDANCE
The security classification guidance for classified information needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;
and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended.
(Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. See instructions for additional guidance.)
List of Attachments (All Files Must be Attached Prior to Signing, i.e., for any digital signature on the form)
Item 13.a. DD FM 254 Review: Sept 30 2026 5 years 6 months
Ref 11a: Contractor performance is restricted to locations identified in Block 13.
Government agency or activity will provide security classification guidance for performance of this contract.
Ref 11e: Contractor is not allowed to Fabricate, Modify, or Store Classified Hardware. Perform services only.
Unclassified
Unclassified
Contractor will require access to locations that may contain classified information.
[PWS_NGS_Hardware_Support_Services_15_JAN_20.docx]
72 ABW PUBLIC AFFAIRS OFFICE, TINKER AFB, OK 73145
PREVIOUS EDITION IS OBSOLETE. Page 3 of 3 AEM LiveCycle Designer
PREVIOUS EDITION IS OBSOLETE. Page 3 of 3 AEM LiveCycle Designer
DD DD FFOORMRM 252544,, APR 2018
NAME & TITLE OF REVIEWING OFFICIAL SIGNATURE
14. ADDITIONAL SECURITY REQUIREMENTS
Requirements, in addition to NISPOM requirements for classified information, are established for this contract.
No Yes If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the CSO. (See instructions for additional guidance.)
15. INSPECTIONS
Elements of this contract are outside the inspection responsibility of the CSO.
No Yes If Yes, explain and identify specific areas and government activity responsible for inspections. (See instructions for additional guidance.)
16. GOVERNMENT CONTRACTING ACTIVITY (GCA) AND POINT OF CONTACT (POC)
a. GCA NAME
b. ACTIVITY ADDRESS CODE (AAC) OF THE CONTRACTING OFFICE (See Instructions)
c. ADDRESS (Include ZIP Code) d. POC NAME
e. POC TELEPHONE (Include Area Code)
f. EMAIL ADDRESS (See Instructions)
17. CERTIFICATION AND SIGNATURES
Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.
a. TYPED NAME OF CERTIFYING OFFICIAL (Last, First, Middle Initial) (See Instructions)
b. TITLE
c. ADDRESS (Include ZIP Code)
d. AAC OF THE CONTRACTING OFFICE (See Instructions)
e. CAGE CODE OF THE PRIME CONTRACTOR (See Instructions.)
f. TELEPHONE (Include Area Code)
g. EMAIL ADDRESS (See Instructions)
h. SIGNATURE
i. DATE SIGNED (See Instructions)
18. REQUIRED DISTRIBUTION BY THE CERTIFYING OFFICIAL
a. CONTRACTOR
b. SUBCONTRACTOR
c. COGNIZANT SECURITY OFFICE FOR PRIME AND
SUBCONTRACTOR
d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY
ADMINISTRATION
e. ADMINISTRATIVE CONTRACTING OFFICER
f. OTHER AS NECESSARY (If more room is needed, continue in Item 13 or on additional page if necessary.)
Unclassified
Unclassified
Kent Nichols Security Administration Kent Nichols
15. INSPECTIONS
Elements of this contract are outside the inspection responsibility of the CSO. DoDAAC[FA8132]
AFSC/PZIMC
3001 Staff Dr, Tinker AFB, OK, 73145 Graham Chapman
405-596-0655
FA8132 graham.chapman@us.af.mil
Graham Chapman FA8132
Contract Specialist
Graham Chapman
FA8132 AFSC PZIMC, CP 405 739 2084 3001 STAFF DR BLDG 3001 STE
2S76 TINKER AFB OK 73145-3303, TINKER AFB, OK, 73145-3303, USA
405-739-5197 2021/01/26 graham.chapman@us.af.mil kent.nichols.1@us.af.mil
13. SECURITY GUIDANCE. The security classification guidance needed for this effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes: to challenge the guidance or classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any document/guides/extracts referenced herein.
Add additional pages as needed to provide complete guidance.
CONTINUATION OF ITEM 13
[Block: 8] [Installation Name] Tinker AFB [Installation Location] Tinker AFB [Cognizant Security Office] 72 ABW/IP, 72 ABW/IP 4385 S. Air Depot Blvd Tinker AFB OK 73145-8606, USAF [Installation Name] Robins AFB [Installation Location] Robins AFB [Cognizant Security Office] 78 ABW/IP, 78 ABW/IP 985 Macon Street Robins AFB GA 31098, USAF
File details come from the government source that posted it. Updated .