ATT 3 Limepoint Fire Trail Stablization Plans_FINAL.pdf
PDF 3 MB Posted
- Solicitation number
- 12363N26Q0005
- Issued by
-
Department of Agriculture Forest Service
About this file
This document is a set of construction plans for the Limepoint Fire Trail Stabilization project located on the Payette National Forest, Council Ranger District, Adams County, Idaho, managed by the U.S. Department of Agriculture Forest Service, Region Four.
The project scope includes trail restoration and stabilization work across approximately 12.2 miles of fire trail. Primary work items consist of excavation (12.2 miles), brushing and vegetation removal from a minimum 8-foot corridor width (12.2 miles), installation of up to 20 drainage dips with 20-foot minimum spacing, and installation of five sign panels. Trail reconstruction requires establishing a 36-inch tread width with 12-inch shoulders where existing trail width was less than 24 inches, utilizing only suitable material for backfill and properly disposing of unsuitable material. The work includes re-establishing original drainage structures, installing check dams or drainage dips as specified, and conducting a minimum 6-inch clearing height for brushing with lop-and-scatter disposal on fill slopes. Archaeological avoidance areas are designated as blade-up no-work zones, though tracking equipment crossing is permitted. All fuel storage, refueling, and equipment operations must maintain spill containment protocols, and creek crossings must be minimized to protect riparian areas. Sign posts are required to follow Forest Service guidelines with specific size and embedment depth requirements based on post type and sign area.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 12363N26Q0005 0001 Payette Limepoint Fire Trails Stabilization.pdf | ||
| 12363N26Q0005 Payette Limepoint Fire Trails Stabilization.docx | DOCX document | |
| ATT 1 Statement of Work.docx | DOCX document | |
| ATT 4 Select Pictures.pdf | ||
| ATT 2 Limepoint Fire Trail Stabilization Specifications.doc | DOC document | |
| ATT 5 Wage Determinations ID0036 and 95-0228.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SHEET NO.
SET NO.
PROJECT:
DATE:
SHEET INDEX
PLANS
SHEET 1 TITLE
SHEET 2 PROJECT MAP
SHEET 3 SUMMARY OF QUANTITIES
SHEET 4 TRAIL CROSS SECTION TYPICAL
SHEET 5 TRAIL BRUSHING TYPICAL
SHEET 6 TRAIL DRAIN DIP TYPICAL
SHEET 7 SIGN AND POST INSTALLATION
7/1/2025
LIMEPOINT FIRE TRAIL
STABILIZATION
N
LIMEPOINT FIRE TRAIL STABILIZATION
U.S. DEPARTMENT OF AGRICULTURE
FOREST SERVICE
REGION FOUR
PAYETTE NATIONAL FOREST
COUNCIL RANGER DISTRICT
ADAMS COUNTY
AREA MAP
IDAHO INDEX MAP
PROJECT ENGINEER
PAYETTE NATIONAL FOREST
DATE
RECOMMENDED BY:
LOCATION MAP
APPROVED BY:
DESIGNED BY:
FOREST ENGINEER
PAYETTE NATIONAL FOREST
DATE
DISTRICT RANGER
PAYETTE NATIONAL FOREST
DATE
PROJECT
LOCATION
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
NOT TO SCALE
DWG SHEET NO.
OF
SHEET
CHECKED
DESIGNER
DATE
DRAWING TITLE
United States Department of Agriculture Forest Service
COUNCIL RANGER DISTRICT
PAYETTE NATIONAL FOREST
LIMEPOINT FIRE TRAIL STABILIZATION
INTERMOUNTAIN REGION
REGION 4 PROJECT MAP
7/1/2025
S. THOMAS-FOX
B. DREIER
AutoCAD SHX Text
PROJECT NAME
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
E
DWG SHEET NO.
OF
SHEET
CHECKED
DESIGNER
DATE
DRAWING TITLE
PROJECT NAME
United States Department of Agriculture Forest Service
COUNCIL RANGER DISTRICT
PAYETTE NATIONAL FOREST
LIMEPOINT FIRE TRAIL STABILIZATION
INTERMOUNTAIN REGION
REGION 4 SUMMARY OF
QUANTITIES
7/1/2025
S. THOMAS-FOX
B. DREIER
GENERAL NOTES:
1.) RESTORE FULL BENCH TRAIL WHERE NECESSARY DUE TO LOSS OF VEGETATION HOLDING TRAIL TREAD IN PLACE AND POST-FIRE EROSION. EXCAVATION OF FULL BENCH TRAIL WHERE EXISTING TRAIL TREAD WAS LESS THAN 24" IN
WIDTH. NEW FULL BENCH TRAIL WOULD BE 36" IN WIDTH EXCEPT WHERE IMPRACTICAL DUE TO OBSTRUCTIONS. PARTIAL BENCH WOULD ONLY BE ALLOWED WHERE FULL BENCH WAS IMPRACTICAL, AND SOIL MOISTUREALLOWED FOR
SUFFICIENT COMPACTION TO CREATE A SUSTAINABLE TREAD.
2.) INSTALL DRAINAGE DIPS AT LOCATIONS DENOTED BY FLAGGING, OR AS WARRANTED BY SLOPE AND EXISTING EROSION IMPACTS TO THE TRAIL TREAD (NOT TO EXCEED 20 WITHOUT APPROVAL
3.) AVOIDANCE AREAS ARE PREIDENTIFIED FOR ARCHAEOLOGICAL CONCERNS ALONG THE TRAIL CORRIDOR. THESE ARE BLADE UP NO WORK ZONES FOR SECTIONS MARKED IN CONTRACT MAPS. TRACKING MACHINE TO CROSS IS
ALLOWED.
4.) AVOID UNNECESSARY CROSSING OF CREEKS TO MINIMIZE COMPACTION AND EROSION EFFECTS IN THESE RIPARIAN AREAS.
5.) BRUSHING OF ONSITE VEGETATION AND REMOVAL FROM TRAIL CORRIDOR TO A MINIMUM WIDTH OF 8FT.
6.) FUEL STORAGE AND REFUELING NOT TO BE NEAR WATER SOURCES UNLESS NO OTHER ALTERNATIVE EXISTS. A SPILL CONTAINMENT KIT THAT WILL ACCOMMODATE POTENTIAL SPILLS FROM THE EQUIPMENT USED DURING
IMPLEMENTATION SHALL BE AVAILABLE ON SITE.
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
INSTALL DRAINAGE DIPS AT LOCATIONS DENOTED BY FLAGGING, OR AS WARRANTED BY SLOPE AND EXISTING EROSION IMPACTS TO THE TRAIL TREAD (NOT TO EXCEED 20 WITHOUT APPROVAL. .
BROKEN DOWN SECTION
EXISTING
C
L
EXISTING BROKEN
DOWN PRISM
(SEE NOTE 4)
RESTORED
TRAIL PRISM
TRENCHED SECTION
RECONTOURED
TRAIL PRISM
EXISTING TRENCHED
PRISM
(SEE NOTE 4)
SLOUGHED SECTION
EXISTING
SLOUGHED
PRISM
DISPOSE OF
UNSUITABLE
MATERIAL
BACKFILL WITH
SUITABLE MATERIAL
LESS THAN6 INCHES
WASHED SECTION
BACKFILL WITH
SUITABLE MATERIAL
EXISTING
C
L
EXISTING
WASHED
PRISM
DISPOSE OF
UNSUITABLE
MATERIAL
C
L
C
L
C
L
C
L
RESTORED
TRAIL PRISM
NEW
NEW
DISPOSE OF
UNSUITABLE
MATERIAL
BACKFILL WITH
SUITABLE MATERIAL
LESS THAN6 INCHES
LESS THAN6 INCHES
RESTORED
TRAIL PRISM
RE-ESTABLISH ORIGINAL DRAINAGE STRUCTURES TO MATCH NEW TREAD
SURFACE.
INSTALL CHECK DAMS, DRAINAGE DIPS OR OTHER DRAINAGE STRUCTURES
WHERE SPECIFIED.
RECONSTRUCT TREAD WIDTH OF 36" WHERE EXISTING TREAD AND
TOPOGRAPHY ALLOW.
USE ONLY SUITABLE MATERIAL TO CONSTRUCT RESTORED TRAIL PRISMS.
DISPOSE OF UNSUITABLE MATERIAL AS SHOWN ON PLANS.
NOTES:
1.
2.
3.
4.
BACKFILL
WITH SUITABLE
MATERIAL
DWG SHEET NO.
OF
SHEET
CHECKED
DESIGNER
DATE
DRAWING TITLE
PROJECT NAME
United States Department of Agriculture Forest Service
COUNCIL RANGER DISTRICT
PAYETTE NATIONAL FOREST
LIMEPOINT FIRE TRAIL STABILIZATION
INTERMOUNTAIN REGION
REGION 4 TRAIL CROSS
SECTION TYPICAL
7/1/2025
S. THOMAS-FOX
B. DREIER
12"
SHOULDER
WIDTH
12"
SHOULDER
WIDTH
TREAD
WIDTH
12"
SHOULDER
WIDTH
12"
SHOULDER
WIDTH
TREAD
WIDTH
12"
SHOULDER
WIDTH
12"
SHOULDER
WIDTH
TREAD
WIDTH
12"
SHOULDER
WIDTH
12"
SHOULDER
WIDTH
TREAD
WIDTH
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
C
L
CUT
CUT
BRUSHING
LIMIT
CLEARING
HEIGHT 6"
DISPOSAL METHOD FOR BRUSHING WILL BE LOP AND SCATTER ON FILL SLOPE.
NOTES:
1.
DWG SHEET NO.
OF
SHEET
CHECKED
DESIGNER
DATE
DRAWING TITLE
PROJECT NAME
United States Department of Agriculture Forest Service
COUNCIL RANGER DISTRICT
PAYETTE NATIONAL FOREST
LIMEPOINT FIRE TRAIL STABILIZATION
INTERMOUNTAIN REGION
REGION 4 BRUSHING TYPICAL
7/1/2025
S. THOMAS-FOX
B. DREIER
48"
UPHILL
WIDTH
48"
DOWNHILL
WIDTH
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
H
A
V
E
R
A
G
E
E
X
I S
T
I N
G
R
O
U
N
D
12 INCH MINIMUM
SURFACE COURSE
WHEN SPECIFIED
L1
L2
L3
A-A
P
O
F
I
A
D
E
GEOTEXTILE
WHEN SPECIFIED
FILL SLOPE
CUT SLOPE
FINISHED GRADE
SECTION
L1
L2
L3
C
L
L120 FOOTMINIMUM
L2
10 F
OOT
M
IN
IM
UM
L3
20 FOOT
MINIMUM
E
X
I S
T
I
O
U
N
D
TOP OF CUT
TOE OF FILL
U
N
L
E
S
O
T
H
E
R
W
I
T
E
D
R
I
P
R
A
P
H
A
X
T
E
D
F
O
M
E
D
A
I
E
T
B
E
Y
O
I
L
L
DRAIN DIPS WILL BE INSTALL WHERE APPROPRIATE.1.
NOTES:
BOTTOM
OF DIP
A
A
SKEW
F
I N
I S
H
A
D
E
SURFACE COURSE
WHEN SPECIFIED
H = C OF TREAD
L1
20 FOOT
MINIMUM
DWG SHEET NO.
OF
SHEET
CHECKED
DESIGNER
DATE
DRAWING TITLE
PROJECT NAME
United States Department of Agriculture Forest Service
COUNCIL RANGER DISTRICT
PAYETTE NATIONAL FOREST
LIMEPOINT FIRE TRAIL STABILIZATION
INTERMOUNTAIN REGION
REGION 4 TRAIL DRAIN DIP
TYPICAL
7/1/2025
S. THOMAS-FOX
B. DREIER
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
EMBEDMENT
DEPTH
(TYP)
WOOD SIGN POST SPACING AND SIZE REQUIREMENTS
GUIDLINES FOR WOOD SIGN POSTS
MAXIMUM WIDTH
MAXIMUM
WIDTH
1/5
WIDTH
3/5
WIDTH
1/5
WIDTH
TWO-POST SPACING SINGLE-POST
NOTES:
DETAILS OF MILEAGE AND ARROW DIRECTION WILL BE IDENTIFIED BY COR PRIOR TO
IMPLEMENTATION.
REFER TO "EM-7100-15 SIGN AND POSTER GUIDELINES
FOR THE FS" FOR SIGN SPECIFICATIONS, MATERIALS, AND PLACEMENT.
POST SPACING APPLIES TO BOTH WOOD AND STEEL POSTS.
FOR SIZES OF STEEL POSTS, REFER TO EM 7100-15.
ALL HARDWARE SHALL BE ALUMINUM OR GALVANIZED.
LAG SCREW FASTENERS REQUIRE LEAD HOLES IN POSTS AND SHALL BE DRILLED
PRIER TO INSTALLATION.
BOLT HOLES IN POSTS TO BE 1/16 INCH LARGER (MAXIMUM) LARGER THAN THE BOLT
HOLE REQUIREMENT.
SIGN AND MARKER POSTS ONLY SHALL BE TREATED WITH CCA (CHROMATED COPPER
ARSENATE) FOR UC4A GROUND CONTACT FOR GENERAL USE.
COMPACT BACKFILL IN 6 INCH LIFTS UNTIL NO VISUAL DISPLACEMENT.
SIGN AND POST INSTALLATION
2 INCHES
(TYP)
30°
(TYP)
AS
STAKED
60 INCHES
TREAD
1 INCH
(TYP)
4 X 4
DEPTH (FT)
EMBEDMENT
MINIMUM
WIDTH (IN)
MAX SIGN
SINGLE POST
AREA (SQ.FT)
MAX SIGN
TWO-POST
4 X 6
6 X 6
(IN)
SIZE
POST
WIDTH (IN)
MAX SIGN
AREA (SQ.FT)
MAX SIGN
* 72
*THE MAXIMUM WIDTH IS 36 INCHES FOR DIAMOND-SHAPED SIGNS.
BACKFILL WITH
SUITABLE MATERIAL
(TYP)
EMBEDMENT
DEPTH
(TYP)
2 INCHES
(TYP)
30°
(TYP)
1 1/2 INCHES
(TYP)
BACKFILL WITH
SUITABLE MATERIAL
1.
2.
3.
4.
5.
6.
7.
8.
9.
WOOD SIGN LANGUAGE
DWG SHEET NO.
OF
SHEET
CHECKED
DESIGNER
DATE
DRAWING TITLE
PROJECT NAME
United States Department of Agriculture Forest Service
COUNCIL RANGER DISTRICT
PAYETTE NATIONAL FOREST
LIMEPOINT FIRE TRAIL STABILIZATION
INTERMOUNTAIN REGION
REGION 4 SIGN AND POST
INSTALLATION
7/1/2025
S. THOMAS-FOX
B. DREIER
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
| Sheets and Views |
| 1 TITLE |
| 2 PROJECT MAP |
| 3 SUMMARY OF QUANTITIES |
| 4 TRAIL CROSS SECTION TYPICAL |
| 5 TRAIL BRUSHING TYPICAL |
| 6 TRAIL DRAIN DIP TYPICAL |
| 7 SIGN AND POST INSTALLATION |
File details come from the government source that posted it. Updated .