Att 2 Marine Mammal Response Matrix 05Dec2019.xlsx
XLSX spreadsheet 26 KB Posted
- Attached to
- US Navy Marine Mammal Boat
- Solicitation number
- N00024-20-Q-2230
About this file
This document contains a specification response matrix and related federal contract opportunity for marine mammal boats. The specification response matrix requests offerors to provide technical details and indicate compliance with specifications for boats to be used by the Naval Information Warfare Systems Command Marine Mammal Program for anti-swimmer defense operations. It solicits key boat parameters, drawings, equipment lists, engine specifications, and battery details. Offerors must state compliance or note any exceptions with rationale provided. The related federal contract opportunity is solicitation number N00024-20-Q-2230 for four marine mammal boats to be issued as a HUBZone set-aside using simplified acquisition procedures for commercial items. All HUBZone small businesses receiving the request for quote can submit proposals to be evaluated.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N0002420Q2230-0006.pdf | ||
| N0002420Q2230-0005.pdf | ||
| N0002420Q2230-0004.pdf | ||
| N0002420Q2230-0003.pdf | ||
| Updated Att 5 Techncial Data Rights Assertion.pdf | ||
| N0002420Q2230-0002.pdf | ||
| N0002420Q2230-0001.pdf | ||
| Att 7 Warranty Terms.doc | DOC document | |
| Att 5 Techncial Data Rights Assertion.pdf | ||
| N00024-20-Q-2230.pdf | ||
| Att 1Marine Mammal Specification 11Feb2020.pdf | ||
| Att 6 Unique_Item_Identification_(UID).doc | DOC document | |
| Att 3 Vendor Provided Spare Parts List 25Feb 2020.xlsx | XLSX spreadsheet | |
| Att 4 Marine Mammal_Delivery_Schedule.xls | XLS spreadsheet |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
| ATTACHMENT 2 |
| MARINE MAMMAL BOAT |
| SPECIFICATION RESPONSE MATRIX |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA) including collar and appendages: xx.xx feet (ft) |
| 070-1 | Enter Hull Length (Welded Structure Only): xx.xx ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft |
[Maximum of 8.5 ft]
| 070-1 | Enter Chine Beam: xx.x ft |
| 070-1 | Enter Height, Keel to Fixed Structure: xx.x ft |
| 070-1 | Enter Height, Keel to Moveable Structure: xx.x ft |
| 070-1 | Height on Trailer when Rigged for Transport: xx.x ft |
| 070-1 | Width on Trailer whe Rigged for Transport: xx.x ft |
| 070-1 | Enter Height, Waterline to Fixed Structure or Equipment: xx.x ft |
[Maximum of 12 ft]
| 070-1 | Enter Deadrise at Midships: xx degrees |
| 070-1 | Enter Deadrise at Transom: xx degrees |
| 070-1 | Enter Total Installed Fuel Capacity: xxx gallons |
| 070-1 | Enter Full Load Weight (as defined in Section 070-4): xx,xxx lbs incl x% margin |
| 070-1 | Enter Longitudinal Center of Gravity (LCG) in Full Load: xx.x ft forward of transom/keel intersect |
| 070-1 | Enter Static Draft of the Hull: x.x ft at Full Load |
| 070-1 | Enter Static Draft to Outboards: x.x ft at Full Load |
[Objective of 30 inches]
| 070-1 | Enter Cruise Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water |
| 070-2 | Enter list of submitted drawings describing the proposed boat. |
| 084-2 | Specific make/model of trailer |
| 100 | General Requirements for Hull Structure - Provide a description of structural methodology. |
| 166 | Provide a description of collar design and identify foam materials |
| 236 | Outboard Engines - Provide proposed OEM and horsepower rating. |
| 313 | Batteries - Identify make model and quantity |
| 313 | Battery Charger - Provide specific make/model and quantity |
| All | Marine Mammal Boat Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-3. |
| Offeror's Notes: |
&12RFP N00024-20-Q-2230&10
&P of &N
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT LARGE |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 40.5 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 39.5 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 16.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 2,100 rpm |
| 070-3 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 083-1 | Initial Spares List - Verify Attachment 2 submitted in Vol II for each configuration. | Verified |
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat Large Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 313-3: Exception: Offeror has no local distributor for Blue Seas voltmeters. Offeror proposes a BrandX Model xxx123 voltmeter in lieu of a Blue Seas voltmeter specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has used BrandX voltmeters in 300 boats in similar applications. |
File details come from the government source that posted it. Updated .