Atachment 4 - NSN IPD - GUAM.docx.pdf

U.S. General Services Administration

Attachment 4 – National Stock Number (NSN) Item Product Descriptions (IPD)

ITEM PRODUCT DESCRIPTIONS –

INDOPACOM - GUAM

Contents Section 1: Office Supplies/Packaging IPDs 6

7025-01-490-6701 UI: EA MOUSE, DATA ENTRY 6

7510-00-173-4897 UI: EA RULER, TAB, METAL 7

7510-00-240-1526 UI: DZ PENCIL 9

7510-00-550-7814 UI: RO TAPE, PRESSURE SENSITIVE ADHESIVE 10

7510-01-347-9580 UI: BX PROTECTOR, DOCUMENT 12

7510-01-381-5300 UI: BX PROTECTOR, DOCUMENT 13

7510-01-455-0022 UI: PG TAB, SIGNAL 15

7510-01-490-7265 UI: EA TAPE, LABELING 16

7510-01-490-7266 UI: EA TAPE, LABELING 18

7510-01-495-0692 UI: EA BINDER, LOOSE-LEAF 19

7510-01-495-0694 UI: EA BINDER, LOOSE-LEAF 21

7510-01-504-5276 UI: RO TAPE, PRESSURE SENSITIVE ADHESIVE 23

7510-01-572-1161 UI: EA CARTRIDGE, TONER 25

7510-01-653-4881 UI: EA CARTRIDGE, TONER 26

7510-01-653-9294 UI: EA PHOTOCONDUCTOR KIT, PRINTER 29

7520-01-156-1411 UI: SE MARKER ASSORTMENT, TUBE TYPE 31

7520-01-349-8776 UI: DZ CASE, FILING, TRANSFER 33

7520-01-465-9889 UI: SE MARKER ASSORTMENT, TUBE TYPE 34

7520-01-498-2079 UI: EA PEN, ALL WEATHER 37

7520-01-507-6969 UI: SE MARKER ASSORTMENT, TUBE TYPE 39

7520-01-544-9467 UI: EA PEN, ALL WEATHER 41

7530-00-247-0318 UI: HD CARD, INDEX 43

7530-01-335-2623 UI: BX PAPER, COPYING, XEROGRAPHIC PROCESS 45

7530-01-498-1873 UI: EA BOOK, FIELD 46

7530-01-498-2078 UI: EA PAD, ALL WEATHER NOTE 48

7530-01-505-3660 UI: EA PAD, ALL WEATHER NOTE 50

`2

Descriptions (IPD)

7530-01-505-3661 UI: EA BOOK, FIELD 52

7530-01-505-3705 UI: EA PAD, ALL WEATHER NOTE 54

7530-01-536-2649 UI: KT FIELD BOOK AND COVER 56

7530-01-536-2651 UI: KT FIELD BOOK AND COVER 58

7530-01-631-2660 UI: KT FIELD BOOK AND COVER 61

8105-00-025-1263 UI: RO BAG, PLASTIC 63

8105-00-179-0087 UI: BE BAG, TEXTILE 65

8105-00-200-0195 UI: BX BAG, PLASTIC 67

8105-00-285-4744 UI: HD BAG, SAND 69

8105-00-334-4120 UI: HD ENVELOPE, PACKING LIST 72

8105-00-543-7169 UI: BE BAG, PAPER 74

8105-00-857-2247 UI: HD ENVELOPE, PACKING LIST 76

8105-01-183-9764 UI: BX BAG, PLASTIC 79

8115-00-774-6562 UI: EA BOX, SHIPPING 81

8115-01-444-0206 UI: EA PALLET BASE, SHIPPING BOX 84

8115-01-444-0211 UI: EA TOP, NESTING, SHIPPING BOX 90

8115-01-556-2579 UI: KT SHIPPING AND STORAGE SYSTEM 94

8115-01-556-2580 UI: KT SHIPPING AND STORAGE SYSTEM 97

8115-01-556-2581 UI: KT SHIPPING AND STORAGE SYSTEM 99

8135-00-283-0670 UI: CL STRAPPING 102

8135-00-724-0551 UI: RO WRAP, ALUMINUM 104

8135-00-926-8991 UI: BD CUSHIONING MATERIAL, PACKAGING 106

8135-00-956-2151 UI: CL STRAPPING 107

8135-01-234-6649 UI: RO CUSHIONING MATERIAL, PACKAGING 109

8135-01-235-8057 UI: EA CUSHIONING MATERIAL, PACKAGING 111

8135-01-386-2322 UI: RO WRAP, PLASTIC FILM 112

9310-00-160-7858 UI: HD STENCILBOARD 114

Section 2: Hardware/Maintenance Repair Operation Supply IPDs 117

4010-00-171-4427 UI: EA CHAIN ASSEMBLY, SINGLE LEG 117

4140-00-833-5068 UI: EA FAN, CIRCULATING 118

4140-00-961-5480 UI: EA FAN, CIRCULATING 120

4140-01-278-1527 UI: EA FAN, CIRCULATING 122

Descriptions (IPD)

5110-00-224-7053 UI: EA CUTTER, WIRE ROPE, HAND OPERATED 125

5110-00-240-5943 UI: EA KNIFE, POCKET 127

5110-00-255-0420 UI: EA SCISSORS, ELECTRICIANS' 129

5110-00-530-1757 UI: EA KNIFE, POCKET 132

5110-00-892-5071 UI: EA KNIFE, CRAFTSMAN'S 134

5110-01-394-6252 UI: EA MULTI-TOOL, FOLDING, POCKET 136

5110-01-429-7306 UI: EA PLIERS, DIAGONAL CUTTING 138

5110-01-452-2215 UI: EA KNIFE, POCKET 141

5120-00-018-1519 UI: EA WRENCH, SPANNER 143

5120-00-081-2305 UI: SE WRENCH SET, SOCKET 145

5120-00-081-2307 UI: SE WRENCH SET, SOCKET 148

5120-00-148-7917 UI: SE WRENCH SET, COMBINATION BOX AND OPEN END 151

5120-00-223-7397 UI: EA PLIERS, SLIP JOINT 154

5120-00-224-7330 UI: EA JACK, HYDRAULIC, HAND 156

5120-00-227-7356 UI: EA SCREWDRIVER, FLAT TIP 159

5120-00-237-6985 UI: EA SCREWDRIVER, FLAT TIP 161

5120-00-239-8251 UI: EA PLIERS 164

5120-00-240-5328 UI: EA WRENCH, ADJUSTABLE 166

5120-00-243-2395 UI: EA MATTOCK 168

5120-00-247-5177 UI: EA H PLIERS 170

5120-00-251-4489 UI: EA HAMMER, HAND 173

5120-00-264-3795 UI: EA WRENCH, ADJUSTABLE 175

5120-00-264-3796 UI: EA WRENCH, ADJUSTABLE 177

5120-00-305-2306 UI: EA PLIERS, WIRE TWISTER 180

5120-00-474-7227 UI: SE WRENCH SET, RATCHET 182

5120-00-624-8065 UI: EA PLIERS, SLIP JOINT 184

5120-00-935-4641 UI: SE KEY SET, SOCKET HEAD SCREW 187

List of Components of 5120-00-935-4641 189

5120-01-004-2718 UI: SE KEY SET, SOCKET HEAD SCREW 231

5120-01-120-8721 UI: EA CRIMPING TOOL, TERMINAL, HAND 233

5120-01-134-9422 UI: EA HANDLE, SOCKET WRENCH 236

5120-01-289-4310 UI: EA RIVETER, BLIND, HAND 238

Descriptions (IPD)

5120-01-367-3525 UI: EA SCREWDRIVER ATTACHMENT, SOCKET WRENCH 241

5120-01-368-1646 UI: EA WRENCH, BOX 243

5120-01-380-8979 UI: EA HOLDER, SCREWDRIVER BIT 246

5120-01-380-9000 UI: EA PLIERS, SLIP JOINT 248

5120-01-416-8568 UI: SE COMBINATION TOOL, HAND 250

5120-01-543-5919 UI: EA WRENCH, OPEN END 277

5120-01-578-4888 UI: EA CLEANING TOOL, WEAPONS 278

5130-01-444-4662 UI: EA DRILL-DRIVER, ELECTRIC, PORTABLE 281

5140-00-226-9018 UI: EA TOOLBOX, PORTABLE 283

5140-00-226-9019 UI: EA TOOLBOX, PORTABLE 285

5140-00-329-4306 UI: EA POUCH, MECHANIC'S TOOLS 288

5180-01-336-7141 UI: KT TOOL KIT, GENERAL OFFICE REPAIR 290

5180-01-516-3219 UI: KT TOOL KIT, WEAPONS CLEANING 296

5210-00-221-1887 UI: EA TAPE, MEASURING 300

5210-00-221-1999 UI: EA GAGE, THICKNESS 302

5210-00-234-5223 UI: EA RULE, MACHINIST'S 304

5210-00-234-5224 UI: EA RULE, MACHINIST'S 306

5210-00-377-6525 UI: EA INDICATOR, DIAL 308

Section 3: Janitorial/Sanitation/General Supplies IPDs 312

4940-01-490-2455 UI: PG PAN, DRIP 312

5340-00-081-3381 UI: HD SEAL, ANTIPILFERAGE312

5340-00-285-6523 UI: EA PADLOCK 313

5340-01-463-5841 UI: SE PADLOCK SET 314

5920-01-384-8501 UI: EA SURGE PROTECTOR 316

5820-01-518-3622 UI: SE RECEIVER-TRANSMITTER, RADIO 317

5970-00-962-3335 UI: CN INSULATING VARNISH, ELECTRICAL 320

6110-01-450-4385 UI: EA REGULATOR, VOLTAGE 321

6230-00-299-3035 UI: EA FLASHLIGHT 322

6230-01-615-6035 UI: EA HEADLAMP 327

7105-00-782-3166 UI: EA STOOL, STEP 328

7230-00-252-3394 UI: BX HOOK, SHOWER CURTAIN 329

7240-00-138-7984 UI: EA CUP MEASURE, LIQUID 330

Descriptions (IPD)

7240-01-094-4305 UI: EA PAIL, UTILITY 331

7330-00-205-3151 UI: EA OPENER, CAN, MOUNTED 332

7330-01-449-2319 UI: EA JUG, INSULATED 333

7340-00-753-5565 UI: BX STIRRING STICK, BEVERAGE (WOOD) 333

7350-00-082-5741 UI: BX CUP, DISPOSABLE (FOAM POLYSTYRENE) 335

7350-00-641-4520 UI: BX CUP, DISPOSABLE (PAPER) 336

7350-00-926-1661 UI: BX CUP, DISPOSABLE (FOAM POLYSTYRENE) 337

7350-01-080-8842 UI: BX TRAY, MESS, COMPARTMENTED 338

7910-00-550-9111 UI: EA CLEANER, VACUUM, ELECTRIC 339

7910-01-423-9525 UI: EA CLEANER, VACUUM, ELECTRIC 341

7920-00-044-9281 UI: BX CLOTH, CLEANING 342

7920-00-148-9666 UI: BE RAG, WIPING 343

7920-00-165-7195 UI: BX CLOTH, CLEANING 344

7920-00-205-1711 UI: BE RAG, WIPING 345

7920-00-205-3570 UI: BE RAG, WIPING 346

7920-00-233-3737 UI: EA BRUSH, DUSTING, RADIATOR 347

7920-00-291-8305 UI: EA BROOM, UPRIGHT 348

7920-00-292-2363 UI: EA BROOM, PUSH 349

7920-00-292-4375 UI: EA BROOM, UPRIGHT 350

7920-00-401-8034 UI: HD CLOTH, CLEANING 351

7920-00-514-2417 UI: GR BRUSH, ACID SCRUBBING 352

7920-01-604-3307 UI: DZ BRUSH, WIRE, SCRATCH 353

7920-01-604-3309 UI: DZ BRUSH, WIRE, SCRATCH 354

7930-01-236-7280 UI: CO DETERGENT, LAUNDRY 355

7930-01-363-8631 UI: BG ABSORBENT MATERIAL, OIL AND WATER 356

7930-01-383-7926 UI: BX CLEANER, INDUSTRIAL, MULTI-PURPOSE 358

7930-01-393-6747 UI: BX CLEANER, INDUSTRIAL, MULTI-PURPOSE 359

7930-01-494-0068 UI: BX DISHWASHING COMPOUND, MACHINE 361

8315-01-463-5853 UI: RO TAPE, TEXTILE 362

8315-01-504-8856 UI: RO FASTENER TAPE, HOOK 363

8415-00-634-2410 UI: BX CAP, FOOD HANDLER'S 365

8465-01-396-9917 UI: EA DRINKING SYSTEM 366

Descriptions (IPD)

8465-01-444-2531 UI: EA BELT, HIGH VISIBILITY 367

8510-00-817-0295 UI: BX TALCUM POWDER 368

8520-01-371-0047 UI: BX HAND CLEANER 369

9330-00-618-7215 UI: BX PLASTIC SHEET, PRESSURE SENSITIVE ADHESIVE COATED

9905-00-148-9546 UI: SE REFLECTOR SET, HIGHWAY WARNING, TRIANGULAR 371

9905-00-424-9829 UI: BX MARKER, TRAFFIC 372

9905-01-119-2553 UI: EA PLATE, IDENTIFICATION 373

9905-01-458-2058 UI: BX RIBBON, FLAGGING, SURVEYOR’S 374

Descriptions (IPD)

Section 1: Office Supplies/Packaging IPDs

7025-01-490-6701 UI: EA MOUSE, DATA ENTRY

DESCRIPTION

ITEM NAME MOUSE, DATA ENTRY

OVERALL WIDTH 2.600 INCHES (+/- 0.400 INCHES)

OVERALL LENGTH 4.500 INCHES (+/- 0.500 INCHES)

OVERALL HEIGHT 1.600 INCHES (+/- 0.700 INCHES)

MINIMUM CABLE LENGTH 60.00 INCHES

UNIT SHAPE ERGONOMIC SYMMETRICAL SHAPE

UNIT DESIGN AMBIDEXTROUS OPTICAL MOUSE

USAGE APPLICATION FOR WINDOWS XP AND NEWER OPERATING

SYSTEMS; COMPATIBLE WITH MAC OSX v10.4x-10.6x

OVERALL COLOR BLACK / GRAY / SILVER / TAN / OFF-WHITE

INTERFACE TYPE USB WIRED

INTERFACE DESIGN 5 BUTTONS WITH INTEGRAL TILT SCROLL WHEEL

PROGRAMMABILITY MOUSE BUTTONS ARE USER CUSTOMIZABLE

LIGHT TYPE LED OR EQUAL

TRACKING SPEED UP TO 60 INCHES PER SECOND MINIMUM

TRACKING RESOLUTION 900 POINTS PER INCH MINIMUM

SPECIAL FEATURE A POINTING DEVICE DESIGNED TO GENERATE A

SIGNAL TO MOVE A CURSOR AND / OR TRACKING

SYMBOL ON A DISPLAY DEVICE FOR INPUTTING DATA

INTO AN ELECTRONIC SYSTEM AND / OR TO CONTROL

THE OPERATION OF A SYSTEM WITH AN OPTICAL

SENSOR FOR PRECISE CONTROL ON ANY SURFACE;

RUBBERIZED SIDES; NO MOUSE PAD NEEDED

BIDDING ON:

Manufacturer's Name: __________________________ Brand___________________________________ Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151

Descriptions (IPD)

007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-00-173-4897 UI: EA RULER, TAB, METAL

DESCRIPTION

ITEM NAME RULER, TAB, METAL

OVERALL WIDTH 1.250 INCHES (+/- 0.160 INCHES)

OVERALL LENGTH 16.00 INCHES (+/- 0.160 INCHES)

OVERALL THICKNESS 0.032 INCH (+/- 0.005 INCHES)

MAXIMUM ERROR ALLOWANCE + 0.005 INCHES / - 0.010 INCHES CUMULATIVE FOR EACH

SCALE

GRADUATION MARKS SCALE 1/32, 1/16, 1/12, 1/6 AND 1/10 INCH

GRADUATION MARKING LOCATION EDGE OF RULER

GRADUATION MARKS COLOR BLACK

MINIMUM LINE HOLES QUANTITY 22

LINE HOLES DIAMETER 0.187 INCHES (+/- 0.004 INCHES)

LINE HOLES SPACING 0.500 INCHES (+/- 0.004 INCHES) CENTERS

Descriptions (IPD)

FILE HOLES INCLUDED

FILE HOLES DESIGN GROUPS OF FILE HOLES IN DIAMETERS OF 7/16 (+/- 0.004 INCHES)

AND 5/16 (+/- 0.004 INCHES) ARRANGED SO THAT

THE HOLES IN THE SAME DIAMETERS MAY BE

PAIRED AT 2.750 INCHES (+/- 0.004 INCHES) AND

4.250 INCHES (+/- 0.004 INCHES) CENTERS

SIDE QUANTITY DOUBLE SIDED

EDGE QUANTITY 4

ETCHING TYPE ACID ETCHED

USAGE DESIGN USED IN THE LAYOUT OF FORMS, PARTICULARLY DATA PROCESSING

FORMS

OVERALL MATERIAL STAINLESS STEEL ALLOY

SPECIAL FEATURE THE RULER IS PUNCHED FOR INDICATING STANDARD FILE HOLE

PLACEMENT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and

Descriptions (IPD) thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-00-240-1526 UI: DZ PENCIL

DESCRIPTION

ITEM NAME PENCIL

I.A.W. SS-P-196

TYPE: I - THICK MARKING CORE

OVERALL PENCIL LENGTH 6.250 INCHES

UNIT TYPE CHINA MARKING

LEAD COLOR BLACK

LEAD SIZE EXTRA THICK

LEAD CROSS-SECTIONAL SHAPE ROUND

PAPER CASING PROVIDED

MARKING SURFACE DESIGN GLAZED

OBLONG CROSS-SECTION CASING NOT PROVIDED

ELECTRICAL CONDUCTIVITY NOT PROVIDED

TECHNICAL CHARACTERISTICS:

- The marking core shall be a mixture of wax, extender, and pigments.

- The paper wrap shall be scored at intervals such as to provide for the easy removal of a strip of paper to further expose the marking core.

- A suitable starting method shall be provided for each strip to facilitate removal.

- The outer layer of the paper wrap shall be finished to approximate the color of the marking core.

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

Descriptions (IPD)

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-00-550-7814 UI: RO TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

IN ACCORDANCE WITH CID A-A-180C DATED JULY 24,1997: DOUBLE COATED PRESSURE

SENSITIVE TAPE: USED FOR IDENTIFICATION, DECORATION, DRAWINGS, MOUNTING

PLATES, HOLDING HEAVY ITEMS, SUCH AS NAMEPLATES ON DOORS OR WALLS.

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

Descriptions (IPD)

I.A.W. TYPE: I - TRANSPARENT FILM BASE

CLASS: 2 - WITHOUT LINER

OVERALL WIDTH 1.000 INCHES

OVERALL LENGTH 36.00 YARDS

OVERALL CORE DIAMETER 3.000 INCHES

OVERALL THICKNESS 0.003 INCHES

USAGE DESIGN ROLL

OVERALL COLOR NATURAL

OVERALL MATERIAL POLYESTER

MATERIAL TRANSPARENCY CLEAR

ADHESIVE LOCATION BOTH SIDES

LINER NOT PROVIDED

ENVIRONMENTAL PROTECTION AGING, MOISTURE AND UV RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

SHELF LIFE

ITEM: Tapes, Pressure Sensitive, Adhesive Type II: Extendable Age on Delivery: 4 Months Shelf Life Code: 6 (24 Months Extendable Shelf Life) Tapes shall be delivered within four (4) months after the manufacture date, and have a shelf life of twenty-four (24) months after the manufacture date. After twenty-four (24) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for

Descriptions (IPD)

Export, shall apply

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its

7510-01-347-9580 UI: BX PROTECTOR, DOCUMENT

ITEM NAME PROTECTOR, DOCUMENT

ACCOMODATED SHEET WIDTH 8.500 INCHES

ACCOMODATED SHEET LENGTH 11.00 INCHES

OVERALL WIDTH 9.000 INCHES (+/- 0.093 INCHES)

OVERALL LENGTH 11.00 INCHES (+/- 0.031 INCHES)

OVERALL THICKNESS 0.002 INCHES

OVERALL COLOR CLEAR

OVERALL MATERIAL PLASTIC, POLYPROPYLENE

MATERIAL TRANSPARENCY TRANSPARENT

SURFACE CONDITION POLISHED

LOAD LOCATION TOP

WEIGHT TYPE STANDARD

HOLE WIDTH 0.250 INCHES (+/- 0.031 INCH) FOR OBLONG HOLE

HOLE LENGTH AND LOCATION 0.375 INCHES (+/- 0.062 INCH) FOR OBLONG HOLE;

PERPENDICULAR TO BINDING EDGE

HOLE DIAMETER 0.250 INCHES (+/- 0.031 INCHES) FOR ROUND HOLE

Descriptions (IPD)

HOLE CENTER LINING 0.375 INCHES (+/- 0.031 INCHES) FROM BINDING EDGE

HOLE SHAPE OBLONG OR ROUND

HOLE QUANTITY 7 ON THE 11.00 INCH SIDE

PAPER INSERT NOT INCLUDED

SPECIAL FEATURE EDGE SHALL BE CLEAR OR WRITEABLE EDGE

UNIT PACKAGE FORM BOX

UNIT PACKAGE QUANTITY 50 DOCUMENT PROTECTOR SHEETS PER BOX

PACKAGE/PACKING: Fifty (50) document protector sheets shall be packed in a box to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The

Descriptions (IPD) government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-381-5300 UI: BX PROTECTOR, DOCUMENT

DESCRIPTION

ITEM NAME PROTECTOR, DOCUMENT

OVERALL WIDTH 9.250 INCHES

OVERALL LENGTH 11.00 INCHES

ACCOMMODATED SHEET WIDTH 8.500 INCHES

ACCOMMODATED SHEET LENGTH 11.00 INCHES

MINIMUM THICKNESS 0.002 INCHES

OVERALL COLOR CLEAR

OVERALL MATERIAL PLASTIC, POLYPROPYLENE

MATERIAL TRANSPARENCY TRANSLUCENT

SURFACE LUSTER NON-GLARE

SURFACE CONDITION MATTE

OPENING LOCATION TOP POCKET

HOLE WIDTH 0.250 INCHES (+/- 0.031 INCH)

HOLE LENGTH 0.375 INCHES (+/- 0.062 INCH)

HOLE DIAMETER 0.250 INCHES (+/- 0.031 INCH)

HOLE DISTANCE 4.250 INCHES CENTER TO CENTER BETWEEN RINGS

HOLE SHAPE ROUND OR OBLONG

HOLE QUANTITY 7

HOLE LOCATION ON THE 11.00 INCH SIDE

PAPER INSERT NOT INCLUDED

WEIGHT GAUGE STANDARD WEIGHT

UNIT PACKAGE FORM BOX

UNIT PACKAGE QUANTITY 50 DOCUMENT PROTECTORS PER BOX

PACKAGE/PACKING: Fifty (50) document protectors shall be packaged in a box to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

Descriptions (IPD)

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-455-0022 UI: PG TAB, SIGNAL

DESCRIPTION

ITEM NAME TAB, SIGNAL

TAB WIDTH 0.50 INCHES

TAB LENGTH 1.75 INCHES

UNIT TYPE PRINTED FLAGS

UNIT SHAPE ARROW

UNIT DESIGN PAGE MARKER

OVERALL COLOR ASSORTED - RED, GREEN, BLUE AND YELLOW

OVERALL MATERIAL PLASTIC

LEGEND INSCRIPTION SIGN & DATE

LEGEND INSCRIPTION COLOR BLACK

DISPENSER INCLUDED

UNIT PACKAGE QUANTITY 20 FLAGS PER DISPENSER,

4 SIGNAL TAB DISPENSERS (80 FLAGS TOTAL) PER

PACKAGE

Descriptions (IPD)

PACKAGING/PACKING: Four (4) signal tab dispensers (totaling 80 flags) shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

PACKAGING/PACKING

SHELF LIFE

ITEM: Repositionable Tape Flag Type II: Extendable Shelf Life Code: 6 (24 Months Extendable Shelf Life) Repositionable Tape Flag shall be delivered within three (3) months after the manufacture date, and have a shelf life of twenty four (24) months after the manufacture date. After twenty four (24) months, the government entity purchasing the item from GSA reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each item and/or intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition

Descriptions (IPD)

Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7510-01-490-7265 UI: EA TAPE, LABELING

DESCRIPTION

ITEM NAME TAPE, LABELING

OVERALL WIDTH 0.50 INCHES

OVERALL LENGTH 26.0 FEET

USAGE APPLICATION MOST BROTHER P-TOUCH LABELS

OVERALL COLOR BLACK CHARACTERS ON WHITE TAPE

SURFACE FINISH GLOSSY

ADHESIVE TYPE PRESSURE SENSITIVE

ADHESIVE LOCATION ONE SIDE

LINER PROVIDED

SPECIAL FEATURE SIX LAYER LAMINATED MARKING TAPE FOR HEAVY DUTY USE

ADHERES TO PRACTICALLY ANY SURFACE

ENVIRONMENTAL PROTECTION WITHSTANDS TEMPERATURE CHANGES; WATER-

RESISTANT, GREASE RESISTANT, LIGHT AND UV

RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

SHELF LIFE

ITEM: Tapes, Pressure Sensitive, Adhesive Type II: Extendable Age on Delivery: 2 Months Shelf Life Code: 4 (12 Months Extendable Shelf Life) Tapes shall be delivered within two (2) months after the date of manufacture and have a shelf life of twelve (12) months after the date of manufacture. After twelve (12) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll

Descriptions (IPD) and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its

7510-01-490-7266 UI: EA TAPE, LABELING

Descriptions (IPD)

DESCRIPTION

ITEM NAME TAPE, LABELING

OVERALL WIDTH 0.750 INCHES

OVERALL LENGTH 26.00 FEET

OVERALL COLOR BLACK ON WHITE

ADHESIVE TYPE PRESSURE SENSITIVE

ADHESIVE LOCATION ONE SIDE

LINER PROVIDED

USAGE DESIGN PT-1300, PT-1400, PT-1500, PT-1500PC, PT-1600, PT-1650, PT-170, PT-1700, PT-170K, PT-1750, PT-1800, PT-1810, PT-1830, PT-

1830C, PT-1830SC, PT-1830VP, PT-1880, PT-1880C, PT-

1880SC, PT-1880W, PT-18R, PT-18RKT, PT-1900, PT-1910,PT-

1950, PT-1960, PT-2030, PT-2030AD, PT-2030VP, PT-2100, PT-

2110, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410,

PT-2430PC, PT-2500PC, PT-2600, PT-2610, PT-2700, PT-2710,

PT-2730, PT-2730VP, PT-300, PT-300B, PT-310, PT-310B, PT-

320, PT-330, PT-350, PT-3600, PT-520, PT-530, PT-540, PT-

550, PT-580C, PT-7500, PT-7600, PT-9200DX, PT-9200PC, PT-

9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN, PT-

D400, PT-D400AD, PT-D400VP, PT-E300, PT-E500, PT-E550W,

PT-H300, PT-H300LI, PT-H500LI, PT-P700,

PT-P750W

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

Descriptions (IPD)

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its

7510-01-495-0692 UI: EA BINDER, LOOSE-LEAF

ITEM NAME BINDER, LOOSE-LEAF

ACCOMMODATED SHEET WIDTH 8.500 INCHES

ACCOMMODATED SHEET LENGTH 11.00 INCHES

OVERALL CAPACITY RATING 2.000 INCHES

MINIMUM SHEET CAPACITY 400 SHEETS (USING 20 LB BASIS WEIGHT BOND PAPER)

UNIT TYPE NONSEPARABLE

UNIT DESIGN OVERLAY ON FRONT COVER, BACK COVER, AND SPINE

COVER DESIGN RIGID

COVER COLOR WHITE

COVER MATERIAL PLASTIC, VINYL OVER FIBERBOARD

COVER OPENING LOCATION SIDE

ITEM SECURING DEVICE TYPE SLANT D-RING

RING QUANTITY 3

LOCKING DEVICE TYPE END LEVER

SHEET HOLDING BAR INCLUDED

INSIDE POCKETS INCLUDED

INSIDE POCKETS LOCATION FRONT AND BACK

TITLE SLOT INCLUDED

TECHNICAL CHARACTERISTICS:

Descriptions (IPD)

- Rings shall be made of steel with a minimum thickness of 0.090 inch and minimum hardness of R30T63 in accordance with ASTM E 18.

- The back plate shall have a minimum thickness of 0.018 inch.

- The operating mechanism cover plate shall have a minimum thickness of 0.012 inch.

- The lever that opens rings shall have a minimum thickness of 0.030 inch.

- The metal hinge shall have a minimum thickness of 0.020 inch.

- Exposed metal parts shall be corrosion resistant in accordance with normal commercial practice.

- The binder shall be bound with plastic 0.012 inch thick minimum, and having a Tear Resistance of 300 pound force per inch minimum in accordance with ASTM-D-1004, or equivalent commercial method.

- The cover board shall have a minimum thickness of 0.10 inch, and a minimum Basis Weight of 325 pound mass per 1000 square feet in accordance with TAPPI-T-410, or equivalent commercial method.

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

(paperboard). If paperboard is used in the manufacture of the item, the contractor shall certify that the paperboard used in the manufacture of the item contains a range of 75 - 100% post consumer material, including a range of 90 - 100 % recovered material in accordance with the EPA

Descriptions (IPD)

Comprehensive Procurement Guidelines, which may be found at:

https://www.epa.gov/smm/comprehensive-procurement-guidelines-paper-and-paper-products Post consumer fiber is defined in accordance with EPA Comprehensive Procurement Guidelines, which may be found at:

https://www.ecfr.gov/current/title-40/chapter-I/subchapter-I/part-247 The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE

GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory requirement (Plastic Covered Binders): The contractor shall certify that the product offered shall include a minimum range of 25 - 50 % recovered plastic material in accordance with the EPA Comprehensive Procurement Guidelines, which may be found at:

www.epa.gov/epawaste/conserve/tools/cpg/index.htm The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its

7510-01-495-0694 UI: EA BINDER, LOOSE-LEAF

ITEM NAME BINDER, LOOSE-LEAF

ACCOMMODATED SHEET WIDTH 8.500 INCHES

ACCOMMODATED SHEET LENGTH 11.00 INCHES

OVERALL SHEET CAPACITY 3.000 INCHES

MINIMUM SHEET CAPACITY 550 SHEETS (USING 20 LB BASIS WEIGHT BOND PAPER)

UNIT TYPE NONSEPARABLE

UNIT DESIGN OVERLAY ON FRONT COVER, BACK COVER, AND SPINE

COVER DESIGN RIGID

COVER COLOR WHITE

COVER MATERIAL PLASTIC, VINYL OVER FIBERBOARD

COVER OPENING LOCATION SIDE

RING TYPE SLANT D-RING

RING QUANTITY 3

Descriptions (IPD)

LOCKING DEVICE TYPE END LEVER

INSIDE POCKETS FRONT AND BACK

TITLE SLOT INCLUDED

SHEET HOLDING BAR INCLUDED

TECHNICAL CHARACTERISTICS:

- Rings shall be made of steel with a minimum thickness of 0.090 inch and minimum hardness of R30T63 in accordance with ASTM E 18.

- The back plate shall have a minimum thickness of 0.018 inch.

- The operating mechanism cover plate shall have a minimum thickness of 0.012 inch.

- The lever that opens rings shall have a minimum thickness of 0.030 inch.

- The metal hinge shall have a minimum thickness of 0.020 inch.

- Exposed metal parts shall be corrosion resistant in accordance with normal commercial practice.

- The binder shall be bound with plastic 0.012 inch thick minimum, and having a Tear Resistance of 300 pound force per inch minimum in accordance with ASTM-D-1004, or equivalent commercial method.

- The cover board shall have a minimum thickness of 0.10 inch, and a minimum Basis Weight of 325 pound mass per 1000 square feet in accordance with TAPPI-T-410, or equivalent commercial method.

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision of ASTM D3951 Standard Practice for Commercial Packaging.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151 007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY

The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wood pallet or skid is used for shipping, the requirements of GSAM 552.211-89, Non-Manufactured Wood Packaging Material for Export, shall apply

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.