Appendix I - Federal Clauses.pdf

Federal Clauses for

Federal Contracts

Prepared by the Wisconsin Department of Transportation Bureau of

Transit, Local Roads, Railroads and Harbors

Effective Date: October 3, 2025

Table of Contents

Overview: All Federal Clauses in this document apply to this solicitation and subsequent award, in addition to the Terms and Conditions specified in this solicitation. By submitting a response to this solicitation, the Bidder is agreeing to all Federal Clauses included in this document.

Instructions: Review all the Federal Clauses and sign the Federal Clauses that require a "Bidder Signature". Bidders must attach this Federal Clauses document to the bid submission, along with the required signatures specified in the table below.

No. TITLE

BIDDER

SIGNATURE

REQUIRED

1 SPECIAL NOTIFICATION REQUIREMENTS FOR STATES -

2 LOBBYING YES

3 GOVERNMENT-WIDE DEBARMENT AND SUSPENSION YES

4 TAX LIABILITY CERTIFICATION YES

5 PROHIBITION ON PROVIDING OR USING CERTAIN

TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT

YES

6 NOTIFICATION TO FEDERAL TRANSIT ADMINISTRATION (FTA) -

7 DISADVANTAGED BUSINESS ENTERPRISE (DBE) -

8 FLY AMERICA REQUIREMENTS -

9 CHARTER BUS REQUIREMENTS -

10 SCHOOL BUS REQUIREMENTS -

11 CARGO PREFERENCE REQUIREMENTS -

12 SEISMIC SAFETY REQUIREMENTS -

13 ENERGY CONSERVATION REQUIREMENTS -

14 CLEAN WATER REQUIREMENTS -

15 ACCESS TO RECORDS AND REPORTS -

16 FEDERAL CHANGES -

17 BONDING REQUIREMENTS -

18 CLEAN AIR -

19 RECYCLED PRODUCTS -

20 DAVIS-BACON AND COPELAND ANTI-KICKBACK ACTS -

21 CONTRACT WORK HOURS AND SAFETY STANDARDS ACT -

22 EQUAL EMPLOYMENT OPPORTUNITY -

23 NO GOVERNMENT OBLIGATION TO THIRD PARTIES -

24 PROGRAM FRAUD AND FALSE OR FRAUDULENT STATEMENTS AND RELATED

ACTS

25 TERMINATION -

26 PRIVACY ACT -

27 CIVIL RIGHTS REQUIREMENTS -

28 BREACHES AND DISPUTE RESOLUTION -

29 PATENT AND RIGHTS IN DATA -

30 TRANSIT EMPLOYEE PROTECTIVE ARRANGEMENTS -

31 INCORPORATION OF FEDERAL TRANSIT ADMINISTRATION (FTA) TERMS -

32 DRUG AND ALCOHOL TESTING -

33 SAFE OPERATION OF MOTOR VEHICLES -

34 ADA ACCESS -

35 VETERANS EMPLOYMENT -

36 FEDERAL GOVERNMENT OBLIGATION TO THIRD PARTIES -

37 TRAFFICKING IN PERSONS -

38 SOLID WASTES (RECOVERED MATERIALS) -

1. SPECIAL NOTIFICATION REQUIREMENTS FOR STATES

FTA Master Agreement

Federal grant monies ($XXXX) fund this contract, in whole or in part (Section 53XX – CFDA 20.XX). As such, agencies receiving such funds and contractors awarded contracts that use such funds must comply with certain Federal certifications and clause requirements. This includes, for purchases of rolling stock over $150,000, compliance with Buy America Act requirements, including pre-award and post-delivery audit requirements and certifications, as well as requirements and certifications applicable under the Federal Motor Vehicle Safety Standard (FMVSS). It is the contractor’s responsibility to be aware of the pertinent certifications and contract clauses, as identified by the Issuing Agency for the instant procurement and ensure compliance with such requirements prior to award and throughout the term of any resultant contract. The full text of these clauses is available at the National Rural Transit Assistance Program (RTAP) website under “ProcurementPro.” The website address is: http://www.nationalrtap.org/ .

2. LOBBYING

31 U.S.C. 1352 49 CFR Part 19 49 CFR Part 20

Applicability to Contracts: The Lobbying requirements apply to Construction/Architectural and Engineering/Acquisition of Rolling Stock/Professional Service Contract/Operational Service Contract/Turnkey contracts over $100,000.

Flow Down Requirement: The Lobbying requirements mandate the maximum flow down, pursuant to Byrd Anti- Lobbying Amendment, 31 U.S.C. § 1352(b)(5) and 49 C.F.R. Part 19, Appendix A, Section 7.

Mandatory Clause/Language: Clause and specific language therein are mandated by 49 CFR Part 19, Appendix A.

Modifications have been made to the Clause pursuant to Section 10 of the Lobbying Disclosure Act of 1995, P.L. 104- 65 [to be codified at 2 U.S.C. § 1601, et seq. ]

Lobbying Certification and Disclosure of Lobbying Activities for Third Party contractors are mandated by 31 U.S.C.

1352(b)(5), as amended by Section 10 of the Lobbying Disclosure Act of 1995, and DOT implementing regulation, "New Restrictions on Lobbying," at 49 CFR § 20.110(d)

Language in Lobbying Certification is mandated by 49 CFR Part 19, Appendix A, Section 7, which provides that contractors file the certification required by 49 CFR Part 20, Appendix A.

Use of "Disclosure of Lobbying Activities," Standard Form-LLL set forth in Appendix B of 49 CFR Part 20, as amended by "Government wide Guidance For New Restrictions on Lobbying," 61 Fed. Reg. 1413 (1/19/96) is mandated by 49 CFR Part 20, Appendix A.

Byrd Anti-Lobbying Amendment, 31 U.S.C. 1352, as amended by the Lobbying Disclosure Act of 1995, P.L. 104-65 [to be codified at 2 U.S.C. § 1601, et seq.] - Contractors who apply or bid for an award of $50,000 or more shall file the certification required by 49 CFR part 20, "New Restrictions on Lobbying." Each tier certifies to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31

U.S.C. 1352. Each tier shall also disclose the name of any registrant under the Lobbying Disclosure Act of 1995 who has made lobbying contacts on its behalf with non-Federal funds with respect to that Federal contract, grant or award covered by 31 U.S.C. 1352. Such disclosures are forwarded from tier to tier up to the recipient.

APPENDIX A, 49 CFR PART 20--CERTIFICATION REGARDING LOBBYING

http://www.nationalrtap.org/home.aspx

Certification for Contracts, Grants, Loans, and Cooperative Agreements

(To be submitted with each bid or offer exceeding $100,000)

The undersigned [Contractor] certifies, to the best of his or her knowledge and belief, that:

A. No Federal appropriated funds have been paid or will be paid, by or on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of an agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with the awarding of any Federal contract, the making of any Federal grant, the making of any Federal loan, the entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or modification of any Federal contract, grant, loan, or cooperative agreement.

B. If any funds other than Federal appropriated funds have been paid or will be paid to any person for making lobbying contacts to an officer or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with this Federal contract, grant, loan, or cooperative agreement, the undersigned shall complete and submit Standard Form--LLL, "Disclosure Form to Report Lobbying," in accordance with its instructions [as amended by "Government wide Guidance for New Restrictions on Lobbying," 61 Fed. Reg. 1413 (1/19/96). Note: Language in paragraph (2) herein has been modified in accordance with Section 10 of the Lobbying Disclosure Act of 1995 (P.L. 104-65, to be codified at 2 U.S.C. 1601, et seq .)]

C. The undersigned shall require that the language of this certification be included in the award documents for all subawards at all tiers (including subcontracts, subgrants, and contracts under grants, loans, and cooperative agreements) and that all subrecipients shall certify and disclose accordingly.

This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Submission of this certification is a prerequisite for making or entering into this transaction imposed by 31, U.S.C. § 1352 (as amended by the Lobbying Disclosure Act of 1995). Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure.

[Note: Pursuant to 31 U.S.C. § 1352(c)(1)-(2)(A), any person who makes a prohibited expenditure or fails to file or amend a required certification or disclosure form shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such expenditure or failure.]

The Contractor, certifies or affirms the truthfulness and accuracy of each statement of its certification and disclosure, if any. In addition, the Contractor understands and agrees that the provisions of 31 U.S.C. A 3801, et seq., apply to this certification and disclosure, if any

Date

Name of Contractor’s Authorized Official

Signature of Contractor’s Authorized Official

Title of Contractor’s Authorized Official

Company Name

3. GOVERNMENT-WIDE DEBARMENT AND SUSPENSION

CFR part 180 CFR part 1200

CFR § 200.213

CFR part 200 Appendix II (I) Executive Order 12549 Executive Order 12689

Background and Applicability A contract award (of any tier) in an amount expected to equal or exceed $25,000 or a contract award at any tier for a federally required audit (irrespective of the contract amount) must not be made to parties listed on the government-wide exclusions in the System for Award Management (SAM), in accordance with the OMB guidelines at 2 C.F.R. part

180. The Excluded Parties List System in SAM contains the names of parties debarred, suspended, or otherwise excluded by agencies, as well as parties declared ineligible under statutory or regulatory authority other than Executive Order 12549.

Recipients, contractors, and subcontractors (at any level) that enter into covered transactions are required to verify that the entity (as well as its principals and affiliates) with which they propose to contract or subcontract is not excluded or disqualified. This is done by: (a) checking the SAM exclusions; (b) collecting a certification from that person; or (c) adding a clause or condition to the contract or subcontract.

Flow Down Recipients, contractors, and subcontractors who enter into covered transactions with a participant at the next lower level, must require that participant to: (a) comply with subpart C of 2 C.F.R. part 180, as supplemented by 2 C.F.R. part 1200; and (b) pass the requirement to comply with subpart C of 2 C.F.R. part 180 to each person with whom the participant enters into a covered transaction at the next lower tier.

Debarment, Suspension, Ineligibility and Voluntary Exclusion The Contractor shall comply and facilitate compliance with U.S. DOT regulations, “Nonprocurement Suspension and Debarment,” 2 C.F.R. part 1200, which adopts and supplements the U.S. Office of Management and Budget (U.S.

OMB) “Guidelines to Agencies on Governmentwide Debarment and Suspension (Nonprocurement),” 2 C.F.R. part 180.

These provisions apply to each contract at any tier of $25,000 or more, and to each contract at any tier for a federally required audit (irrespective of the contract amount), and to each contract at any tier that must be approved by an FTA official irrespective of the contract amount. As such, the Contractor shall verify that its principals, affiliates, and subcontractors are eligible to participate in this federally funded contract and are not presently declared by any Federal department or agency to be:

A. Debarred from participation in any federally assisted Award;

B. Suspended from participation in any federally assisted Award;

C. Proposed for debarment from participation in any federally assisted Award;

D. Declared ineligible to participate in any federally assisted Award;

E. Voluntarily excluded from participation in any federally assisted Award; or

F. Disqualified from participation in ay federally assisted Award.

By signing and submitting its bid or proposal, the bidder or proposer certifies as follows:

The certification in this clause is a material representation of fact relied upon by the Recipient. If it is later determined by the Recipient that the bidder or proposer knowingly rendered an erroneous certification, in addition to remedies available to the Recipient, the Federal Government may pursue available remedies, including but not limited to suspension and/or debarment.

The bidder or proposer agrees to comply with the requirements of 2 C.F.R. part 180, subpart C, as supplemented by 2 C.F.R. part 1200, while this offer is valid and throughout the period of any contract that may arise from this offer. The bidder or proposer further agrees to include a provision requiring such compliance in its lower tier covered transactions.

Official

Signature of Contractor’s Authorized Official

Title of Contractor’s Authorized Official

Company Name

4. TAX LIABILITY CERTIFICATION

This certificate applies to all contracts. Offers that do not include this completed certification will be rejected as nonresponsive.

The Proposer certifies that:

1. It has no unpaid federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability;

2. It has not been convicted of a felony criminal violation under any federal law within the preceding 24 months; and

3. It shall require that the language of this certification be included in the award documents for all subcontractors and material suppliers at all tiers, and that all subcontractors and material suppliers shall certify and disclose accordingly.

The Proposer certifies or affirms the truthfulness and accuracy of the contents of the statements submitted on or with this certification. In addition, the Proposer understands and agrees that the provisions of 31 U.S.C. §§ 3801 et al.

are applicable to this certification.

Official

Signature of Contractor’s Authorized Official

Title of Contractor’s Authorized

5. PROHIBITION ON PROVIDING OR USING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE

SERVICES OR EQUIPMENT

Section 889

Consistent with Section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019, Pub. L.

115-232 (Aug. 13, 2018), CONTRACTOR must not:

(a) provide “covered telecommunications equipment or services” (as that term is defined in Section 889 of the Act) as part of its performance under this Contract, if such equipment or services will be used as a substantial or essential component of any system or as critical technology as part of any system; or

(b) use such covered telecommunication equipment or services as a substantial or essential component of any system or as critical technology as part of any system, regardless of whether that use is in connection with performance of work under this Contract, subject only to the exception that covered telecommunications equipment or services may be provided or used if the equipment or services cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles.

Official

Signature of Contractor’s Authorized Official

Title of Contractor’s Authorized

6. NOTIFICATION TO FEDERAL TRANSIT ADMINISTRATION (FTA)

If a current or prospective legal matter that may affect the Federal Government emerges, the Recipient must promptly notify the FTA Chief Counsel and FTA Regional Counsel for the Region in which the Recipient is located. The Recipient must include a similar notification requirement in its Third-Party Agreements and must require each Third Party Participant to include an equivalent provision in its subagreements at every tier, for any agreement that is a “covered transaction” according to 2 C.F.R. §§180.220 and 1200.220.

4) The types of legal matters that require notification include, but are not limited to, a major dispute, breach, default, litigation, or naming the Federal Government as a party to litigation or a legal disagreement in any forum for any reason.

5) Matters that may affect the Federal Government include, but are not limited to, the Federal Government’s interests in the Award, the accompanying Underlying Agreement, and any Amendments thereto, or the Federal Government’s administration or enforcement of federal laws, regulations, and requirements.

6) The Recipient must promptly notify the U.S. DOT Inspector General in addition to the FTA Chief Counsel or Regional Counsel for the Region in which the Recipient is located, if the Recipient has knowledge of potential fraud, waste, or abuse occurring on a Project receiving assistance from FTA.

The notification provision applies if a person has or may have submitted a false claim under the False Claims Act, 31 U.S.C. § 3729 et seq., or has or may have committed a criminal or civil violation of law pertaining to such matters as fraud, conflict of interest, bribery, gratuity, or similar misconduct. This responsibility occurs whether the Project is subject to this 18

Agreement or another agreement between the Recipient and FTA, or an agreement involving a principal, officer, employee, agent, or Third Party Participant of the Recipient. It also applies to subcontractors at any tier. Knowledge, as used in this paragraph, includes, but is not limited to, knowledge of a criminal or civil investigation by a Federal, state, or local law enforcement or other investigative agency, a criminal indictment or civil complaint, or probable cause that could support a criminal indictment, or any other credible information in the possession of the Recipient.

7. DISADVANTAGED BUSINESS ENTERPRISE (DBE)

The current federal DBE program has been suspended by the U.S. Department of Transportation pursuant to interim final rule (FR Document 2025-19426, 90 FR 48116-48117). Accordingly, for federally funded proposals, no federal DBE program requirement will be applied.

8. FLY AMERICA REQUIREMENTS

49 U.S.C. §40118 41 CFR Part 301-10

Applicability to Contracts

The Fly America requirements apply to the transportation of persons or property, by air, between a place in the U.S.

and a place outside the U.S., or between places outside the U.S., when the FTA will participate in the costs of such air transportation. Transportation on a foreign air carrier is permissible when provided by a foreign air carrier under a code share agreement when the ticket identifies the U.S. air carrier's designator code and flight number.

Transportation by a foreign air carrier is also permissible if there is a bilateral or multilateral air transportation agreement to which the U.S. Government and a foreign government are parties and which the Federal DOT has determined meets the requirements of the Fly America Act.

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under 10,000. These requirements do not apply to micro-purchases; except for construction contracts over $2,000.

Flow Down Requirements: The Fly America requirements flow down from FTA recipients and subrecipients to first tier contractors, who are responsible for ensuring that lower tier contractors and subcontractors are in compliance.

Model Clause/Language: The relevant statutes and regulations do not mandate any specified clause or language. FTA proposes the following language.

Fly America Requirements - The Contractor agrees to comply with 49 U.S.C. 40118 (the "Fly America" Act) in accordance with the General Services Administration's regulations at 41 CFR Part 301-10, which provide that recipients and subrecipients of Federal funds and their contractors are required to use U.S. Flag air carriers for U.S Government-financed international air travel and transportation of their personal effects or property, to the extent such service is available, unless travel by foreign air carrier is a matter of necessity, as defined by the Fly America Act.

The Contractor shall submit, if a foreign air carrier was used, an appropriate certification or memorandum adequately explaining why service by a U.S. flag air carrier was not available or why it was necessary to use a foreign air carrier and shall, in any event, provide a certificate of compliance with the Fly America requirements. The Contractor agrees to include the requirements of this section in all subcontracts that may involve international air transportation.

9. CHARTER BUS REQUIREMENTS

49 U.S.C. 5323(d) 49 CFR Part 604

Applicability to Contracts

The Charter Bus requirements apply to the following type of contract: Operational Service Contracts. Applicability to

Micro-Purchases: Micro-purchases are defined as those purchases under $10,000.

These requirements do not apply to micro-purchases.

Flow Down Requirements: The Charter Bus requirements flow down from FTA recipients and subrecipients to first tier service contractors.

Model Clause/Language: The relevant statutes and regulations do not mandate any specific clause or language. The following clause has been developed by FTA.

Charter Service Operations - The contractor agrees to comply with 49 U.S.C. 5323(d) and 49 CFR Part 604, which provides that recipients and subrecipients of FTA assistance are prohibited from providing charter service using federally funded equipment or facilities if there is at least one private charter operator willing and able to provide the service, except under one of the exceptions at 49 CFR 604.9.

Any charter service provided under one of the exceptions must be "incidental," i.e., it must not interfere with or detract from the provision of mass transportation.

10. SCHOOL BUS REQUIREMENTS

49 U.S.C. 5323(F) 49 CFR Part 605

Applicability to Contracts: The School Bus requirements apply to the following type of contract: Operational Service Contracts.

Flow Down Requirements: The School Bus requirements flow down from FTA recipients and subrecipients to first tier service contractors.

Model Clause/Language: The relevant statutes and regulations do not mandate any specific clause or language. The following clause has been developed by FTA.

School Bus Operations - Pursuant to 69 U.S.C. 5323(f) and 49 CFR Part 605, recipients and subrecipients of FTA assistance may not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school bus operators unless qualified under specified exemptions. When operating exclusive school bus service under an allowable exemption, recipients and subrecipients may not use federally funded equipment, vehicles, or facilities.

11. CARGO PREFERENCE REQUIREMENTS

46 U.S.C. 1241 46 CFR Part 381

Applicability to Contracts: The Cargo Preference requirements apply to all contracts involving equipment, materials, or commodities which may be transported by ocean vessels.

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under $10,000. These requirements do not apply to micro-purchases; except for construction contracts over $2,000.

Flow Down Requirements: The Cargo Preference requirements apply to all subcontracts when the subcontract may be involved with the transport of equipment, material, or commodities by ocean vessel.

Model Clause/Language: The MARAD regulations at 46 CFR 381.7 contain suggested contract clauses. The following language is proffered by FTA.

Cargo Preference - Use of United States-Flag Vessels - The contractor agrees:

A. to use privately owned United States-Flag commercial vessels to ship at least 50 percent of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for United States-Flag commercial vessels;

B. to furnish within 20 working days following the date of loading for shipments originating within the United States or within 30 working days following the date of leading for shipments originating outside the United States, a legible copy of a rated, “on-board” commercial ocean bill-of -lading in English for each shipment of cargo described in the preceding paragraph to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to the FTA recipient (through the contractor in the case of a subcontractor’s bill-of-lading.)

C. to include these requirements in all subcontracts issued pursuant to this contract when the subcontract may involve the transport of equipment, material, or commodities by ocean vessel.

12. SEISMIC SAFETY REQUIREMENTS

42 U.S.C. 7701 et seq. 49 CFR Part 41

Applicability to Contracts: The Seismic Safety requirements apply only to contracts for the construction of new buildings or additions to existing buildings.

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under $10,000. These requirements do not apply to micro-purchases; except for construction contracts over $2,000.

Flow Down Requirements: The Seismic Safety requirements flow down from FTA recipients and subrecipients to first tier contractors to assure compliance, with the applicable building standards for Seismic Safety, including the work performed by all subcontractors.

Model Clauses/Language: The regulations do not provide suggested language for third-party contract clauses. The following language has been developed by FTA.

Seismic Safety - The contractor agrees that any new building or addition to an existing building will be designed and constructed in accordance with the standards for Seismic Safety required in Department of Transportation Seismic Safety Regulations 49 CFR Part 41 and will certify to compliance to the extent required by the regulation.

The contractor also agrees to ensure that all work performed under this contract including work performed by a subcontractor is in compliance with the standards required by the Seismic Safety Regulations and the certification of compliance issued on the project.

13. ENERGY CONSERVATION REQUIREMENTS

42 U.S.C. 6321 et seq.

2 CFR Part 1201

Applicability to Contracts: The Energy Conservation requirements are applicable to all contracts.

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under $10,000. These

Flow Down Requirements: The Energy Conservation requirements extend to all Third-Party contractors and their contracts at every tier and subrecipients and their subagreements at every tier.

Model Clause/Language: No specific clause is recommended in the regulations because the Energy Conservation requirements are so dependent on the state energy conservation plan. The following language has been developed by FTA.

Energy Conservation - The contractor agrees to comply with mandatory standards and policies relating to energy efficiency which are contained in the state energy conservation plan issued in compliance with the Energy Policy and Conservation Act.

14. CLEAN WATER REQUIREMENTS

33 U.S.C. 1251

Applicability to Contracts: The Clean Water requirements apply to each contract and subcontract which exceeds $150,000.

Flow Down Requirements: The Clean Water requirements flow down to FTA recipients and subrecipients at every tier.

Model Clause/Language: While no mandatory clause is contained in the Federal Water Pollution Control Act, as amended, the following language developed by FTA contains all the mandatory requirements.

Clean Water –

A. The Contractor agrees to comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 U.S.C. 1251 et seq . The Contractor agrees to report each violation to the Purchaser and understands and agrees that the Purchaser will, in turn, report each violation as required to assure notification to FTA and the appropriate EPA Regional Office.

B. The Contractor also agrees to include these requirements in each subcontract exceeding $50,000 financed in whole or in part with Federal assistance provided by FTA.

15. ACCESS TO RECORDS AND REPORTS

49 U.S.C. 5325 18 CFR 18.36 (i)

49 CFR 633.17

Applicability to Contracts: Reference Chart "Requirements for Access to Records and Reports by Type of Contracts"

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under $10,000. These requirements do not apply to micro-purchases; except for construction contracts over $2,000.

Flow Down Requirement: FTA does not require the inclusion of these requirements in subcontracts.

Model Clause/Language: The specified language is not mandated by the statutes or regulations referenced, but the language provided paraphrases the statutory or regulatory language.

Access to Records - The following access to records requirements apply to this Contract:

A. Where the Purchaser is not a State but a local government and is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 18 C. F. R. 18.36(i), the Contractor agrees to provide the Purchaser, the FTA Administrator, the Comptroller General of the United States or any of their authorized representatives access to any books, documents, papers and records of the Contractor which are directly pertinent to this contract for the purposes of making audits, examinations, excerpts and transcriptions. Contractor also agrees, pursuant to 49 C. F. R. 633.17 to provide the FTA Administrator or his authorized representatives including any PMO Contractor access to Contractor's records and construction sites pertaining to a major capital project, defined at 49 U.S.C. 5302(a)1, which is receiving federal financial assistance through the programs described at 49 U.S.C. 5307, 5309 or 5311.

B. Where the Purchaser is a State and is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 C.F.R. 633.17, Contractor agrees to provide the Purchaser, the FTA Administrator or his authorized representatives, including any PMO Contractor, access to the Contractor's records and construction sites pertaining to a major capital project, defined at 49 U.S.C. 5302(a)1, which is receiving federal financial assistance through the programs described at 49 U.S.C. 5307, 5309 or 5311. By definition, a major capital project excludes contracts of less than the simplified acquisition threshold currently set at $250,000.

C. Where the Purchaser enters into a negotiated contract for other than a small purchase or under the simplified acquisition threshold and is an institution of higher education, a hospital or other non-profit organization and is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 C.F.R.

19.48, Contractor agrees to provide the Purchaser, FTA Administrator, the Comptroller General of the United States or any of their duly authorized representatives with access to any books, documents, papers and record of the Contractor which are directly pertinent to this contract for the purposes of making audits, examinations, excerpts and transcriptions.

D. Where any Purchaser which is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 U.S.C. 5325(a) enters into a contract for a capital project or improvement (defined at 49 U.S.C.

5302(a)1) through other than competitive bidding, the Contractor shall make available records related to the contract to the Purchaser, the Secretary of Transportation and the Comptroller General or any authorized officer or employee of any of them for the purposes of conducting an audit and inspection.

E. The Contractor agrees to permit any of the foregoing parties to reproduce by any means whatsoever or to copy excerpts and transcriptions as reasonably needed.

F. The Contractor agrees to maintain all books, records, accounts and reports required under this contract for a period of not less than three years after the date of termination or expiration of this contract, except in the event of litigation or settlement of claims arising from the performance of this contract, in which case Contractor agrees to maintain same until the Purchaser, the FTA Administrator, the Comptroller General, or any of their duly authorized representatives, have disposed of all such litigation, appeals, claims or exceptions related thereto. Reference 18 CFR 18.39(i)(11).

G. FTA does not require the inclusion of these requirements in subcontracts.

REQUIREMENTS FOR ACCESS TO RECORDS AND REPORTS BY TYPES OF CONTRACT

Operational Service Contract Turnkey Contract Construction

Contract

Arch. or Engineering Contract

Rolling Stock Contract

Professional Service Contract

State Grantees

Contracts below Simplified Acquisition

Threshold (Small Purchase) ($250,000)

None

Those imposed on state pass thru to Contractor

Contracts above $100,000/Capital

Projects

None unless1 non-competitive award

Those imposed on state pass thru to contractor

Yes, if non-competitive award or if funded thru2

5307, 5309, None unless non-competitive award

None unless non-competitive award

None unless non- competitive award

Non-State Grantees

Contracts below Simplified Acquisition

Threshold (Small Purchase) ($250,000)

Yes

Those imposed on non-state Grantee pass thru to

Contracts above $100,000/Capital

Projects

Those imposed on non-state Grantee pass thru to

Sources of Authority:49 USC 5325 (a), 49 CFR 633.17, 18 CFR 18.36 (i)

16. FEDERAL CHANGES

2 CFR Part 1201

Applicability to Contracts: The Federal Changes requirement applies to all contracts.

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under $10,000. These requirements do not apply to micro-purchases; except for construction contracts over $2,000.

Flow Down Requirement: The Federal Changes requirement flows down appropriately to each applicable changed requirement.

Model Clause/Language: No specific language is mandated. The following language has been developed by FTA.

Federal Changes - Contractor shall at all times comply with all applicable FTA regulations, policies, procedures and directives, including without limitation those listed directly or by reference in the Master Agreement between Purchaser and FTA, as they may be amended or promulgated from time to time during the term of this contract.

Contractor's failure to so comply shall constitute a material breach of this contract.

17. BONDING REQUIREMENTS

Applicability to Contracts: For those construction or facility improvement contracts or subcontracts exceeding $250,000, FTA may accept the bonding policy and requirements of the recipient, provided that they meet the minimum requirements for construction contracts as follows:

A. A bid guarantee from each bidder equivalent to five (5) percent of the bid price. The "bid guarantees" shall consist of a firm commitment such as a bid bond, certifies check, or other negotiable instrument accompanying a bid as assurance that the bidder will, upon acceptance of his bid, execute such contractual documents as may be required within the time specified.

B. A performance bond on the part to the Contractor for 100 percent of the contract price. A "performance bond" is one executed in connection with a contract to secure fulfillment of all the contractor's obligations under such contract.

C. A payment bond on the part of the contractor for 100 percent of the contract price. A "payment bond" is one executed in connection with a contract to assure payment, as required by law, of all persons supplying labor and material in the execution of the work provided for in the contract. Payment bond amounts required from Contractors are as follows:

1) 50% of the contract price if the contract price is not more than $1 million;

2) 40% of the contract price if the contract price is more than $1 million but not more than $5 million;

or

3) $2.5 million if the contract price is more than $5 million.

D. A cash deposit, certified check or other negotiable instrument may be accepted by a grantee in lieu of performance and payment bonds, provided the grantee has established a procedure to assure that the interest of FTA is adequately protected. An irrevocable letter of credit would also satisfy the requirement for a bond.

Flow Down Requirement: Bonding requirements flow down to the first tier contractors.

Model Clauses/Language: FTA does not prescribe specific wording to be included in Third Party contracts. FTA has prepared sample clauses as follows:

Bid Bond Requirements (Construction)

A. Bid Security - A Bid Bond must be issued by a fully qualified surety company acceptable to (Recipient) and http://www.fta.dot.gov/3162.html listed as a company currently authorized under 31 CFR, Part 223 as possessing a Certificate of Authority as described thereunder.

B. Rights Reserved - In submitting this Bid, it is understood and agreed by bidder that the right is reserved by (Recipient) to reject any and all bids, or part of any bid, and it is agreed that the Bid may not be withdrawn for a period of [ninety (90)] days subsequent to the opening of bids, without the written consent of (Recipient).

It is also understood and agreed that if the undersigned bidder should withdraw any part or all of his bid within [ninety (90)] days after the bid opening without the written consent of (Recipient), shall refuse or be unable to enter into this Contract, as provided above, or refuse or be unable to furnish adequate and acceptable Performance Bonds and Labor and Material Payments Bonds, as provided above, or refuse or be unable to furnish adequate and acceptable insurance, as provided above, he shall forfeit his bid security to the extent of (Recipient's) damages occasioned by such withdrawal, or refusal, or inability to enter into an agreement, or provide adequate security therefor.

It is further understood and agreed that to the extent the defaulting bidder's Bid Bond, Certified Check, Cashier's Check, Treasurer's Check, and/or Official Bank Check (excluding any income generated thereby which has been retained by (Recipient) as provided in [Item x "Bid Security" of the Instructions to Bidders]) shall prove inadequate to fully recompense (Recipient) for the damages occasioned by default, then the undersigned bidder agrees to indemnify (Recipient) and pay over to (Recipient) the difference between the bid security and (Recipient's) total damages, so as to make (Recipient) whole.

The undersigned understands that any material alteration of any of the above or any of the material contained on this form, other than that requested, will render the bid unresponsive.

Performance and Payment Bonding Requirements (Construction)

The Contractor shall be required to obtain performance and payment bonds as follows:

A. Performance bonds

1) The penal amount of performance bonds shall be 100 percent of the original contract price, unless the (Recipient) determines that a lesser amount would be adequate for the protection of the (Recipient).

2) The (Recipient) may require additional performance bond protection when a contract price is increased. The increase in protection shall generally equal 100 percent of the increase in contract price. The (Recipient) may secure additional protection by directing the Contractor to increase the penal amount of the existing bond or to obtain an additional bond.

B. Payment bonds

1) The penal amount of the payment bonds shall equal:

i. Fifty percent of the contract price if the contract price is not more than $1 million.

ii. Forty percent of the contract price if the contract price is more than $1 million but not more than $5 million; or

iii. Two and one half million if the contract price is more than $5 million.

2) If the original contract price is $5 million or less, the (Recipient) may require additional protection as required by subparagraph 1 if the contract price is increased.

Performance and Payment Bonding Requirements (Non-Construction)

The Contractor may be required to obtain performance and payment bonds when necessary to protect the (Recipient's) interest.

A. The following situations may warrant a performance bond:

1) (Recipient) property or funds are to be provided to the contractor for use in performing the contract or as partial compensation (as in retention of salvaged material).

2) A contractor sells assets to or merges with another concern, and the (Recipient), after recognizing the latter concern as the successor in interest, desires assurance that it is financially capable.

3) Substantial progress payments are made before delivery of end items starts.

4) Contracts are for dismantling, demolition, or removal of improvements.

B. When it is determined that a performance bond is required, the Contractor shall be required to obtain performance bonds as follows:

1) The penal amount of performance bonds shall be 100 percent of the original contract price, unless the (Recipient) determines that a lesser amount would be adequate for the protection of the (Recipient).

2) The (Recipient) may require additional performance bond protection when a contract price is increased. The increase in protection shall generally equal 100 percent of the increase in contract price. The (Recipient) may secure additional protection by directing the Contractor to increase the penal amount of the existing bond or to obtain an additional bond.

C. A payment bond is required only when a performance bond is required, and if the use of payment bond is in the (Recipient's) interest.

D. When it is determined that a payment bond is required, the Contractor shall be required to obtain payment bonds as follows:

1) The penal amount of payment bonds shall equal:

i. Fifty percent of the contract price if the contract price is not more than $1 million;

ii. Forty percent of the contract price if the contract price is more than $1 million but not more than $5 million; or

iii. Two and one half million if the contract price is increased.

Advance Payment Bonding Requirements

The Contractor may be required to obtain an advance payment bond if the contract contains an advance payment provision and a performance bond is not furnished. The (Recipient) shall determine the amount of the advance payment bond necessary to protect the (Recipient).

Patent Infringement Bonding Requirements (Patent Indemnity)

The Contractor may be required to obtain a patent indemnity bond if a performance bond is not furnished and the financial responsibility of the Contractor is unknown or doubtful. The (Recipient) shall determine the amount of the patent indemnity to protect the (Recipient).

Warranty of the Work and Maintenance Bonds

A. The Contractor warrants to (Recipient), the Architect and/or Engineer that all materials and equipment furnished under this Contract will be of highest quality and new unless otherwise specified by (Recipient), free from faults and defects and in conformance with the Contract Documents.

All work not so conforming to these standards shall be considered defective. If required by the [Project Manager], the Contractor shall furnish satisfactory evidence as to the kind and quality of materials and equipment.

B. The Work furnished must be of first quality and the workmanship must be the best obtainable in the various trades. The Work must be of safe, substantial and durable construction in all respects. The Contractor hereby guarantees the Work against defective materials or faulty workmanship for a minimum period of one (1) year after Final Payment by (Recipient) and shall replace or repair any defective materials or equipment or faulty workmanship during the period of the guarantee at no cost to (Recipient). As additional security for these guarantees, the Contractor shall, prior to the release of Final Payment [as provided in Item X below], furnish separate Maintenance (or Guarantee) Bonds in form acceptable to (Recipient) written by the same corporate surety that provides the Performance Bond and Labor and Material Payment Bond for this Contract.

These bonds shall secure the Contractor's obligation to replace or repair defective materials and faulty workmanship for a minimum period of one (1) year after Final Payment and shall be written in an amount equal to ONE HUNDRED PERCENT (100%) of the CONTRACT SUM, as adjusted (if at all).

18. CLEAN AIR

42 U.S.C. 7401 et seq

40 CFR 15.61

2 CFR Part 1201

Applicability to Contracts: The Clean Air requirements apply to all contracts exceeding $150,000, including indefinite quantities where the amount is expected to exceed $150,000 in any year.

Flow Down Requirement: The Clean Air requirements flow down to all subcontracts which exceed $150,000.

Model Clauses/Language: No specific language is required. FTA has proposed the following language.

A. The Contractor agrees to comply with all applicable standards, orders or regulations issued pursuant to the Clean Air Act, as amended, 42 U.S.C. §§ 7401 et seq . The Contractor agrees to report each violation to the Purchaser and understands and agrees that the Purchaser will, in turn, report each violation as required to assure notification to FTA and the appropriate EPA Regional Office.

B. The Contractor also agrees to include these requirements in each subcontract exceeding $150,000 financed in whole or in part with Federal assistance provided by FTA.

19. RECYCLED PRODUCTS

42 U.S.C. 6962 40 CFR Part 247

Executive Order 12873

Applicability to Contracts: The Recycled Products requirements apply to all contracts for items designated by the EPA, when the purchaser or contractor procures $10,000 or more of one of these items during the fiscal year, or has procured $10,000 or more of such items in the previous fiscal year, using Federal funds. New requirements for "recovered materials" will become effective May 1, 1996. These new regulations apply to all procurement actions involving items designated by the EPA, where the procuring agency purchases $10,000 or more of one of these items in a fiscal year, or when the cost of such items purchased during the previous fiscal year was $10,000.

Applicability to Micro-Purchases: Micro-purchases are defined as those purchases under $10,000. These requirements do not apply to micro-purchases.

Flow Down Requirement: These requirements flow down to all to all contractor and subcontractor tiers.

Model Clause/Language: No specific clause is mandated, but FTA has developed the following language.

Recovered Materials - The contractor agrees to comply with all the requirements of Section 6002 of the Resource Conservation and Recovery Act (RCRA), as amended (42 U.S.C. 6962), including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order 12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part 247.

20. DAVIS-BACON AND COPELAND ANTI-KICKBACK ACTS

Background and Application The Davis-Bacon and Copeland Acts are codified at 40 USC 3141, et seq. and 18 USC 874. The Acts apply to grantee construction contracts and subcontracts that “at least partly are financed by a loan or grant from the Federal Government.” 40 USC 3145(a), 29 CFR 5.2(h), 18 CFR 18.36(i)(5). The Acts apply to any construction contract over $2,000. 40 USC 3142(a), 29 CFR 5.5(a). ‘Construction,’ for purposes of the Acts, includes “actual construction, alteration and/or repair, including painting and decorating.” 29 CFR 5.5(a). The requirements of both Acts are incorporated into a single clause (see 29 CFR 3.11) enumerated at 29 CFR 5.5(a) and reproduced below.

The clause language is drawn directly from 29 CFR 5.5(a) and any deviation from the model clause below should be coordinated with counsel to ensure the Acts’ requirements are satisfied.

Clause Language - Davis-Bacon and Copeland Anti-Kickback Acts

(1) Minimum wages

(i) All laborers and mechanics employed or working upon the site of the work (or under the United States Housing

Act of 1937 or under the Housing Act of 1949 in the construction or development of the project), will be paid unconditionally and not less often than once a week, and without subsequent deduction or rebate on any account (except such payroll deductions as are permitted by regulations issued by the Secretary of Labor under the Copeland Act (29 CFR part 3)), the full amount of wages and bona fide fringe benefits (or cash equivalents thereof) due at time of payment computed at rates not less than those contained in the wage determination of the Secretary of Labor which is attached hereto and made a part hereof, regardless of any contractual relationship which may be alleged to exist between the contractor and such laborers and mechanics.

Contributions made or costs reasonably anticipated for bona fide fringe benefits under section 1(b)(2) of the Davis-Bacon Act on behalf of laborers or mechanics are considered wages paid to such laborers or mechanics, subject to the provisions of paragraph (1)(iv) of this section; also, regular contributions made or costs incurred for more than a weekly period (but not less often than quarterly) under plans, funds, or programs which cover the particular weekly period, are deemed to be constructively made or incurred during such weekly period. Such laborers and mechanics shall be paid the appropriate wage rate and fringe benefits on the wage determination for the classification of work actually performed, without regard to skill, except as provided in 29 CFR Part 5.5(a)(4). Laborers or mechanics performing work in more than one classification may be compensated at the rate specified for each classification for the time actually worked therein: Provided, That the employer's payroll records accurately set forth the time spent in each classification in which work is performed. The wage determination (including any additional classifications and wage rates conformed under paragraph (1)(ii) of this section) and the Davis-Bacon poster (WH-1321) shall be posted at all times by the contractor and its subcontractors at the site of the work in a prominent and accessible place where it can be easily seen by the workers.

(ii)

(A) The contracting officer shall require that any class of laborers or mechanics, including helpers, which is not listed in the wage determination, and which is to be employed under the contract shall be classified in conformance with the wage determination.