Appendix B - H-Frame Chair Specifications.pdf
PDF 3 MB Posted
- Attached to
- ATC Dorm Specific Furniture Federal contract opportunity
- Solicitation number
- FA301624Q0005
About this file
This document contains technical specifications for an H-frame chair required for a federal contract opportunity. The opportunity is for 737 TRG ATC Dorm Specific Furniture and includes a requirement for 100 H-frame chairs. Each chair must be 18.5 inches wide, 23.5 inches deep, and 32 inches tall, constructed of 16 gauge square steel tubing for the frame and mounting brackets. The seat and back cushions are made of 1/2 inch plywood and foam, and upholstered in black fabric. The steel components will be powder coated black. Delivery of the chairs will fulfill the furniture needs for Air Force dormitories under Solicitation FA301624Q0005, a 100% small business set aside with a NAICS code of 337127 and size standard of 500 employees issued by the Department of the Air Force Air Education and Training Command.
View the file
Other files for this federal contract opportunity
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
H-FRAME CHAIR TECHNICAL REQUIREMENTS
A. H-Chair
1. Size
18.S"W x 23.S"D x 32"H
2. Materials
All materials shall be new and free of defects that may negatively affect appearance, durability, or function.
16 gauge x l .00 x 1.00" Square Tube Frame
16 gauge Back Mounting Brackets
16 gauge Seat Mounting Brackets
3. Construction
General assembly consists of two welded tubular steel frames, four mounting brackets, two steel seat supports, and an upholstered seat and back.
a. Frame
Each frame consists of a "H" shaped and "L" shaped piece of 16 gauge x 1 .00" x
1.00" square tubing welded together to create the four legs. The seat and back is mechanically fastened with no less than eight (8) bolts for rigidity and strength.
Plastic floor glides are attached to each leg to protect the chair and flooring. Plastic closure caps are inserted into the open ends of each tube.
b. Seat and Back Cushions
The seat consists of a 1/2" plywood seat support with 3" thick foam cushion. The back consists of a 1/2" plywood back support with 2.5" thick foam cushion. The seat and back are upholstered with fabric of sufficient quality to withstand high-use and hard-use environments.
c. Color
All steel powder coated: Total Eclipse (black)
All vinyl: Black
502 CONS/JBKAE
JBSA Lackland, TX
FA301624Q0005
ATC 5 Dorm Furniture
Appendix B 1 of 3
22.55
.7
23.45
.1
16.47
502 CONS/JBKAE
JBSA Lackland, TX
FA301624Q0005
Appendix B 2 of 3
Default/
QTY.
l
2 75001556 CH-4L-H CHAIR BACK CUSHION l
3 70000882 CH-4L-H CHAIR SUB 1
4 12008 405 LEVELER, 1" SQ APPOLO SWIVEL 4
5 11008383 MS5/16-l8x 1-1/2 SOC HEXBUTIONHD 9
18.47
16.47 ,__ ____ 23.45 -----ft
I I l
-17.70
I I I
I LL/? I 'I ?up/ I I
<Xi -
- l
----- 22.55 -----< I
' ,, Wi.,t/lllt UV " O,.lt
CfSCili'II011 ttOJtS.
4L-HCH
tr<IIU
F-iACIIOIJt 1/l'.l
.» f()3 .X'O: l Oh
10-02-2009
502 CONS/JBKAE
JBSA Lackland, TX
FA301624Q0005
Appendix B 3 of 3
File details come from the government source that posted it. Updated .