Allegion_CON_Wire_Harness_Data_Sheet.pdf

Cross category electrified solution for FAlcon, IVES, Schlage and Von Duprin

Allegion Connect

Overview

Allegion Connect is a cross-category electrified solution utilizing common interconnect components to our electrified options. Allegion Connect is a quick and easy way to connect power sources; all the way from your power supply to electrified door hardware.

There is no wire cutting; reducing installation and maintenance time ultimately cutting cost. After installation, Allegion Connect continues to provide benefits throughout the lifetime of the opening by offering a comprehensive service kit. Our cross category product offering is interchangeable which allows for simple upgrades and replacements.

Features and benefits § Quick: common connections reducing installation time

§ Perfect connections: these factory installed connectors ensure the right wires match up every time

§ Protective: the connectors protect the connection points throughout the installation process and lifetime of the opening

§ Interchangeable: all Allegion Connect products utilize the same connectors

§ Maintenance: you no longer need to cut away wire to disconnect Allegion products, also available are service kits specifically for Allegion Connect

Available products Von Duprin Exits 22, 33A/35A, 98/99 Series

Electric strikes 6100, 6200 Series

EPT 10

Schlage Locks ND Series - 10, 12, 80, 96 functions L Series - 9080, 9082 functions

Falcon Exits 24, 25 Series

Locks T Series - 851, 881 functions MA Series - 851, 881 functions

IVES Architectural hinges

3CB1, 5BB1

Standard and heavyweight

Geared hinges 112, 224

Pin/barrel hinges

600, 700, 715

For more visit www.allegion.com/us or call 877-671-7011.

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a

$2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises more than 25 global brands, including strategic brands

CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com.

About Allegion

© 2014 Allegion

010220, Rev. 10/14 www.allegion.com/us

Allegion Connect - the perfect connection Locks, exits, hinges and accessories

Wire run options

How to order examples

Von Duprin CX-99-EO-CON

EPT-10-CON

Schlage locks ND80PDEL-RHO-626-CON

L9080EUP-03A-626-CON

Falcon exits EL-25-R-L-US26D-RHR-CON

Falcon locks MA-851P-24-DG-626-CON

IVES 5BB-1-HW-4.5x4.5-626-CON-TW8

112HD-CL-83-TW8-CON

700-630-83-TW8-CON

How to order

1. Specify CON for Connect electronic options

Example: EL-99-EO-CON (99 Series Electrified Latching exit only with ConneX connectors)

2. Specify harness length; Consult door manufacturer for harness length

3. Specify Von Duprin EPT10-CON or Ives 7200 power transfer hinge

Note: Must be ordered with exit devices and locks

Note: You will need to purchase a separate wiring harness to go from exit device to EPT/hinge/electric strike. We recommend the use of our 6" power supply harness (connectors on one end, flying lead on the other) to tie into wiring coming out from power supply or access control system.

Harness lengths

Harness length Connectors on both ends

Connectors on one end, crimped pins on other end (recommended for doors with narrow channel)

6 inches CON-6 CON-6P

12 inches CON-12 CON-12P

26 inches CON-26 CON-26P

32 inches CON-32 CON-32P

38 inches CON-38 CON-38P

44 inches CON-44 CON-44P

50 inches CON-50 CON-50P

192 inches CON-192 CON-192P

Optional power supply wire harness: Connectors on one end, stripped leads on the other end, offereing a direct connection to the power supply

6 inches CON-6W - wire extension to power supply

Note: Wiring harnesses are used to connect the door hardware (lock, exit device) to the EPT/hinge, and an additional wiring harness can be used to route from the EPT/hinge to locations outside of the frame. Wiring harnesses are not to be used to connect system to power supply, refer to your power supply installation instructions for more information. We recommend the use of our optional 6” power supply harness (connectors on one end, flying leads on the other) to tie into wiring coming out from power supply or access control system.

Consult door manufacturer for harness length requirements.

Harness part numbers with ordering information can be located in the Schlage, Von Duprin and Falcon pricebooks.

A service kit is available for order in the Schlage, Von Duprin and Falcon pricebooks.

Included in this kit are male end plugs, female end plugs and pins to customize harnesses to your application.

Refer to power supply installation instructions for information on wiring requirements (wire gauge, distance requirements, etc.)for system.

Optional 6” power supply harness with connectors on one end and flying leads on the other end for ease of connection to power supply

Note: For illustration purposes only.

Consult your door manufacturer for harness length requirements.

Wiring harnesses have 8 pin and 4 pin connectors on each end, or can be ordered with the connectors on one end only. Harnesses are available in several configurations and lengths to fit your opening requirements.

Options include: connector to connector, connector to pin end, connector to flying leads

Connect ready door hardware

Von Duprin EPT10/IVES power transfer hinge

- must be ordered when using exit device or locks

Contact your local Allegion Representative today at 877-671-7011 or visit allegion.com/us to learn how our Connect solution can simplify your installation and maintenance processes.