RFI_-122815_AG-1484-S-16-0003_WMNF_Backup_Generator.docx

DOCX document 18 KB Posted

Attached to
Backup Generator Installation WMNF
Solicitation number
AG-1484-S-16-0003
Issued by

View the file

Other files

Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

RFI for Solicitation # AG-1484-S-16-003 WMNF Backup Generator

Questions and Answers – 12/28/15

1. Drawing E-721, Electrical Line Diagram. A note on this drawing states : "crosshatched areas are) not in contract." There is equipment (MSB, several panels) that are NOT in the crosshatched areas. Since the drawing is dated 3-05-07, we assume that this equipment was installed, is existing to remain, and is not in the SOW. Is this correct?

Main Switch is to remain in place and drawing E-721 is provided for reference of what generator/transfer switch in the statement of work is to power.

2. Drawing E-713. Same comment applies. Are these ductbanks/excavations existing to remain?

E713 is provided to show existing conduit from NHEC pad-mount transformer to Main Switch Gear, there are two spare existing conduits that could be utilized. Some contractors at the pre-bid viewing wanted to install generator and transfer switch next to the incoming power pad-mount transformer, this alternate location was approved.

3. Drawing E-631. What equipment, components, conduit and wire on this sheet are part of the SOW? In addition to the new generator and ATS switch, what other equipment/hardware are in the SOW?

E-613 is a reference of existing equipment.

File details come from the government source that posted it. Updated .