Addendum 1 RFP AP-22-122 FINAL.pdf

Department of Financial Management 411 West Ocean Boulevard, 6th Floor

Long Beach, CA 90802

(562) 570-6425

May 03, 2023

NOTICE TO PROPOSERS

ADDENDUM NO. 1: Q&A

RFP No. AP-22-122

Baggage Handling System

This addendum changes and supersedes the language in the original RFP. Please acknowledge receipt of this addendum by signing and submitting with your proposal. Any proposer who fails to submit this addendum may be disqualified.

The City would like to remind Proposers that pursuant to Section 4.2 of the RFP, the City will not be responsible for or bound by (1) any oral communication or (2) any other information or contact that occurs outside the official communication process specified in the RFP, unless confirmed in writing by the City Contact or Alternate City Contact.

The City would like to provide the following updates:

• Pre-proposal meeting attendance sheet attached.

The questions and answers are as follows:

1. Q: Do you know the cost for software licenses per user? If not, can we reach out to Intellimodus, Inc. for that information?

A: Please contact intellimodus for the cost of software licenses per user.

2. Q: Does 2.1.3.2.1 mean to be on site within 1 hour or to just acknowledge and respond within 1 hour (i.e., take the call and have techs in route). Traffic could play a role in potential delays.

A: Refer to section 2.1.3.2.1, contractor is expected to respond within one hour.

3. Q: What are the busiest times that might require/pertain to maintenance needs?

A: Typically, busiest times are during early morning flights. .

4. Q: Is there a provided office, and if so, what size?

A: The provided office is approximately 10x10 ft.

5. Q: Does the office have system controls?

A: Yes.

Addendum No. 1 RFP AP-22-122

6. Q: What service is currently in place?

A: ELS.

7. Q: How long has incumbent been in place?

A: Approximately four years.

8. Q: What is the parts storage situation?

A: Two containers outside, plus space inside office/building. There is additional outdoor workspace.

9. Q: Can you clarify the emergency response time? Does one hour mean after the call is made?

A: Refer to Answer to Question 2 above.

10. Q: Is the current manpower on site similar to what you are expecting for the

RFP?

A: Yes, the current manpower (two people) is generally sufficient, but having access/support from three people may be necessary/required depending on the situation / proposals.

11. Q: Does the lead need to be available 24/7? Is this part of the current manpower?

A: Yes, the lead or alternate appointed lead does need to have 24/7 availability.

This is part of our current manpower in place.

12. Q: Is parking a reimbursable cost and how much is it per employee?

A: Airport will provide parking for employees.

13. Q: Is badging a reimbursable cost and how much is the current badging cost? (The most current online info shows that there is no cost for a new badge, only for replacement badges. Does this hold true?)

A: Please refer to Section 2.2.2.2.4. Contractor is responsible for the cost associated with the process in obtaining initial badge.

14. Q: Please verify that there is no performance or payment bond required for this contract.

A: No performance nor payment bonds are required for this contract.

15. Q: Is bag tag printer maintenance in scope or out of scope?

A: Out of scope.

16. Q: Prevailing Wage - Please confirm that the applicable prevailing wage category for this contract is Elevator Constructor. If not, please provide the applicable category.

A: The City does not typically assign a craft/classification. Contractors will need to review the scopes of work as published by DIR and establish which applies.

17. Q: The expiration date on the prevailing wage determination is shown to be

12/31/23. Is this stating that if we are able to enter into this 3-5 year contract in

2023 (before December 31, 2023), the rates listed in the determination of prevailing wages are locked in for that 3-5 year term of contract?

A: The wage rate assigned at the time of bid is valid for the duration of the published contract term and any annotated renewals. If there is an expiration date on a craft, that usually means there is a predetermined increase. Though the rate remains the same (i.e. 2023-1 or whichever is assigned) some crafts do have predetermined increases within that rate that contractors must abide by.

18. Q: Please confirm the contract term is a two (2) year base period with three (3) one-year options – as the pricing table only indicates three years. How will the additional years be represented on the pricing sheet?

A: Please refer to Section 1.4. The contract will be for a period of two years with the option to renew for three additional one-year periods. Renewals will be subject to negotiation. The third year on the pricing sheet represent renewal options for negotiation.

19. Q: Tub/Bins – How many tubs are available for the airlines to utilize?

A: Approximately 300.

20. Q: Airport Badging – After allowing for 2 weeks for processing the application and taking the training, how long does it take for the applicant to receive their badge?

A: Typically, the badge is received at the end of training.

21. Q: Payment Terms – please clarify if the City’s invoice payment terms are different than Net 30 days from an approved invoice?

A: City standard terms Net 30 days.

22. Q: Tax Exemption – please confirm that the City will be able to provide the contractor with a Tax Exemption Certificate?

A: The City is not tax-exempt.

23. Q: Contract Funding - Is this City contract a Federally-assisted Contract? If so, please provide the wage determination required under the Davis-Bacon Act.

A: This is not a federally assisted contract.

24. Q: CMMS- confirm that the contractor is to provide their own CMMS system or does the city own their own CMMS?

A: The Contractor shall provide their own CMMS.

25. Q: Please provide the current list of spare parts inventory.

A: Spare parts inventory list attached below.

26. Q: Please provide the cost for obtaining vehicle permits for the airside operation.

A: N/A, contractor does not drive on airside.

27. Q: Will access to the city/airport Wi-Fi be provided to the contractor?

A: No.

28. Q: Will a landline phone line be provided to the contractor?

29. Q: How many access seats does the city require for the CMMS?

A: Three.

30. Q: Is there space available for the contractor to park a vehicle?

A: Yes, contractor to park in parking structure.

31. Q: Please confirm that the contractor is not required to use radios on the airport’s frequency.

A: Contractor not required to use radios on the airport’s frequency.

32. Q: Will the airport provide a single point of contact for contractor to get operational approvals and direction?

A: Yes

33. Q: Is there a page limit for the proposal submission?

A: No page limit.

34. Q: Is there a late inbound flight experience from time to time that the airport would request the contractor to stay over on site to cover in case there are any bag jams?

35. Q: If there are occasional late flight requirements, would the contractor’s overtime to stay after their normal scheduled time to accommodate, be covered under the on-call rates for call outs?

A: Regular overtime rates.

36. Q: Prevailing Wage: In 2018, the prevailing wage classification for this project was

“Elevator Constructor Trade”, is this still the requirement?

A: Please see Answer to Question 16.

37. Q: 2.1.3.2.1 - On-Call Services, Emergency Services: For the 1-hour response, does the timer start when the call is placed to the contactor?

A: Please refer to Answer to Question 2 above.

38. Q: 2.1.1.6 On-Call Services: If all PMs are to be done during normal operations hours (4am to 11pm), will PMs that are required to be done overnight incur OT?

39. Q: 2.1.5.1 - 2.1.5.3 Review and Documentation of System and System

Components: What is the City asking for in terms of documentation? Is the vendor be expected to work with installer to obtain system specs and drawing?

A: Please refer to Section 2.1.5. Contractor shall conduct a physical review of the existing BHS, review all available specifications and drawings, and research any information necessary to understand the system or parts of the system currently being used.

40. Q: 2.1.3.4.2 Scope of Work: The City is requesting that stand-by staff be available.

Will this require us to have additional individuals outside of the contracted headcount to cover the standby requirement?

41. Q: Please confirm that tubs will be the responsibility of the vendor.

42. Q: 5.3 Contract Terms & Conditions, 12, Index 2023-1 general prevailing wage journeyman determinations. Please confirm the journeyman craft or classification's prevailing wage to be utilized while performing this work?

A: The City does not assign a craft. Contractors must look at the scopes of work as published by DIR and establish what fits their scope. When a project is awarded and a consultant is hired, then they can verify which craft should be utilized.

43. Q: 2.1.3.4.3 On-Call Services: The City is asking that a staffing agency or subcontractors to be in place within 30 days. Please advise what work these individuals would be expected to handle?

A: Intellimodius for software support.

44. Q: Will the City supply the contractor with internet services at no additional cost?

A: No. Refer to Answer to Question 27.

45. Q: Will the City supply the contractor with radios to communicate with OPS at no additional cost?

46. Q: Will consumables be a pass-through cost?

A: Yes, consumables for the BHS system is considered a pass-through cost.

47. Q: 2.1.3.1 On-Call Services: A designated lead is required to be available to respond to emergencies. Does this require a designated shift lead to be on schedule, or will a designated highly skilled technician fit the requirement?

A: Please refer to Answer to Question 11.

48. Q: 2.1.3.2.1 On Call Services: What is the expected emergency response time between 11:01pm and 3:59am?

A: Refer to 2.1.3.2.1 Normal response time is between the hours of 4:00 AM and 11:00 P.M.

49. Q: Is contractor required to cover one-time rentals for specialty equipment?

A: No, but approval by the Airport is required.

50. Q: Project Due Date: Can the due date of the RFP be extended to allow time for

LGB to answer questions, release the addendum (s), and allow for adjustments of responses, if needed?

51. Q: 2.1.3.4.3 Would the airport support the contractor’s regular employee who is scheduled on their day-off to fulfill this “Stand-by or backup staff” as ON-Call or would the airport prefer that the contractor enter into an agreement with a third-party contractor in the event additional manpower is needed?

A: The contractor staff is sufficient.

PREPARED BY: Tommy Ryan, Administrative Analyst III

ACKNOWLEDGED BY: ________________________________________________

Company Name

Print Name Title

Signature Date

BHS Spare Parts List 5/2/2023

LGB QTY Part Number Description Manufacturer

4 F2B-SXR-107-ABHS 2 Bolt Bearings

2 F4B-SXR-111-ABHS 4 Bolt Bearings

2 WSTU-SXR-107-ABHS Take-up Bearings

2 FC-SXR-111-ABHS Ticket Counter Bearings

TP06-33.00-44.25-5.63 6" Pulley

SP04-38.00-44.25-3.13 4" Pulley

DP8.75-36.00-57.88-4.25-SK927 8 3/4" Pulley

SP04-38.00-44.50-3.25 4" Take-up Pulley

TPV6-33.00-44.25-5.625 6" Que Tail Pulley

DPV6.75-33.00-46.13-5.63 6 5/8" Que Drive Pulley

DCI-RLO4-36BF 3 1/2" Return Roller

NHM-10ESBV-E3 Ticket Counter Belt LF

APH120COS Transport Belt LF

NSL-11ESBV 13 Incl/Decl Belt LF

NSL-11ESBV 13 Que V-guide Belt LF

1 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 33.71) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 24.88) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW-BRE 20 HL RG (Ratio 24.88) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 20.00) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW-BRE 20 HL RG (Ratio 33.71) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 43.28) 1.5 HP NORD Gear

1 SK572.1VL-90 SP/4 CUS TW (Ratio 42.38) 1.5 HP NORD Gear

1 SK572.1VL-90 SP/4 CUS TW (Ratio 24.58) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 17.46) 1.5 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 10.16) 2.0 HP NORD Gear

1 SK572.1VL-90 LP/4 CUS TW (Ratio 21.85) 2.0 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW-BRE 20 HL RG (Ratio 24.88) 1.5 NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 15.56) 2.0 HP NORD Gear

1 SK572.1VL-90 LP/4 CUS TW (Ratio 12.68) 2.0 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 12.84) 2.0 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 20.00) 2.0 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 17.46) 2.0 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 24.88) 2.0 HP NORD Gear

1 SK 92672.1AMMHD-90 LP/4 CUS TW-BRE 20 HL RG (Ratio 33.71) 2.0 HP NORD Gear

1 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 17.08) 3.0 HP NORD Gear

1 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 21.14) 3.0 HP NORD Gear

1 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 28.38) 3.0 HP NORD Gear

1 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 31.85) 3.0 HP NORD Gear

1 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 39.32) 3.0 HP NORD Gear

1 SK 92772.1AMMHD-100 LP/4 CUS TW-BRE 40 HL RG (Ratio 39.32) 3.0 HP NORD Gear

1 SK 92772.1 AMMHD-LP/4 CUS TW (Ratio 12.50) 3.0HP NORD Gear

1 SK 92772.1 AMMHD-100 LP/4 CUS TW-BRE 40 HL RG (Ratio 15.42) 3.0 HP NORD Gear

1 SK 92772.1 AMMHD-LP/4 CUS TW -BRE 40 HL RG (19:17) 3.0 HP NORD Gear

1 SK 92672.1AMMHD-90 SP/4 CUS TW-BRE 20

HL RG (Ratio 43.28)

1.5 HP NORD Gear

Forbo GSTR Curve conveyor belt C48_39-90 Flow-Turn

Forbo GSTR Curve conveyor belt C48_39-45 Flow-Turn

Forbo GSTR Curve conveyor belt C48_39-52 Flow-Turn

Habasit Roughtop 447 Spiral Curve Belt C 48_39-90-9 Flow-Turn

Habasit Roughtop 447 Spiral Curve Belt C 48_39-90-22 Flow-Turn

Habasit Roughtop 447 Spiral Curve Belt C 48_39-90-18 Flow-Turn

1-7/16 SHAFT 1 7/16" Shaft (Drive) Flow-Turn

1-7/16 SHAFT 1 7/16" Shaft (Tail) Flow-Turn

50B27 Sprocket (Part # 50B27) TSUBAKI

5"DIA -2.7"DIA MIN Drive Roller Flow-Turn

5"DIA -2.7"DIA MIN Tail Roller Flow-Turn set top & bottom 45° Nylon Wear Guides Flow-Turn set top & bottom 52° Nylon Wear Guides Flow-Turn set top & bottom 90° Nylon Wear Guides Flow-Turn

0 RETURN ROLLER ASSEMBLY CLEAR Flow-Turn

1 FBMH23T Bearing - SEALMASTER SEALMASTER

0 Bearing - Cover SEALMASTER

Power Turns

Motors

Belting

Pulleys/Rollers

LGB QTY Part Number Description Manufacturer

0 Rivet and Washer Set Flow-Turn

0 Nylon Bushing Flow-Turn

0 Grommets Flow-Turn

Forbo GSTR Curve conveyor belt O 60_57-22.5 Flow-Turn

1-7/16 SHAFT 1 7/16" Shaft (Drive) Flow-Turn

1-7/16 SHAFT 1 7/16" Shaft (Tail) Flow-Turn

50B27 Sprocket (Part # 50B27) TSUBAKI

5"DIA -2.7"DIA MIN Drive Roller Flow-Turn

5"DIA -2.7"DIA MIN Tail Roller Flow-Turn set top & bottom 22.5° Nylon Wear Guides Flow-Turn

0 RETURN ROLLER ASSEMBLY CLEAR Flow-Turn

1 FBMH23T Bearing - SEALMASTER SEALMASTER

0 Bearing - Cover SEALMASTER

0 Rivet and Washer Set Flow-Turn

0 Nylon Bushing Flow-Turn

0 Grommets Flow-Turn

1056604 CLV691-0000 Laser Scanner

1040571 MSC800-0000 Controller

6032863 Power Supply (10A)

6033968 Power Supply (20A)

6039654 CAN Cable (3meters) – USA

6039653 CAN Cable (0.7meters) – USA

6039657 Y-Cable to EEPROM (0.4meters) – USA

1 2062454 Cloning Modules w/ Blower Cntr’l & Restrictor

5001070 Blower Fan with Cable

2 4028998 Blower Fan Filters

7023047 Photoeye WL2000-B5300

1068802 DFS21A-KCBAZ000S01 Encoder

6034144 5 Port Din Rail Mount Switch

6036220 Light Tree

1059540 LMS500-20000S60 Dimensioning Head

2078873 VMC800-0002 Industrial PC

AL9940-A-39 SNUB PULLEY ASSY FF X 4 X 1-7/16 X 39 BG

AL9942-A-39 T-U PULLEY ASSY FF X 4 X 1-7/16 X 39 BG

AL9944-A-39 END PULLEY ASSY TF 6 X 1-7/16 X 39 BG

AL9950-A-39 DRV PUL ASSY FF 6-3/4 X 1-7/16 X 39 BG

AL221-041900 BRG SLMSTR SKWZ-LOC 2BFB-1 7/16 MH PLUG

AL221-291900 BRG SLMSTR SKWZ-LOC WSTU-1 7/16 MH PLUG

AL339-311117 BELT MRG E8/2 U0/V15 LG 36W X 257 5/8

AL339-311112 BELT MRG E8/2 U0/V15 LG 36W X 173 1/2

68.0020.001-08 Motorized Pulley, Vertical Belt Drive

68.0020.000-24 Paddle Nose Roller

68.0020.000-51 Transition Plate Roller

68.0020.000-57 Tie rod, RH thread

68.0020.000-58 Tie rod, LH & RH thread

68.0020.001-35 Paddle Belt

AL226-8002 BRG, Hanger, 25mm

620.000623 Servo Gearmotor

AL257-0139 Return Roller

AL221-032001 BRG, Pillow Block, 45mm

68.0020.001-38 NUT, 3/4-14 NPSM RIGHT HAND THREAD

68.0020.000-99 NUT, 3/4-14 NPSM LEFT HAND THREAD

680.000102 Fan Filter

620.000622 Motor Control Cable, Green 5m (Siemens 6FX5002-

2DC10-1AF0)

620.000621 Motor Control Cable, Orange 5m (Siemens 6FX5002-

5CS01-1AF0)

680.00019 MINIATURE RELAY SCREW CONNECTION 6.2MM,

24VDC

Oversize Power Turns

Seimens Short and Long Merges

Seimens HSD II

SICK ALIS400 Scanner Array & ALISDIM Dimensioning System

LGB QTY Part Number Description Manufacturer

620.000617 Servo Smart Line Module, 5kw (Siemens 6SL3130-

6AE15-0AB0)

620.000616 Servo Dual Motor Module, 18A (Siemens 6SL3120-

2TE21-0AA3)

680.000042 Power Supply, 24V, 5A

620.001973 Servo Control Unit, CU320-2 (Siemens 6SL3040-

1MA00-0AA0)

AL2961118 MINIATURE RELAY INSERT SINGLE POLE N.O. 60V

AL2980319 RELAY BASE WITH FILTER 120VAC

AL215E-411001 GEARMTR SEW K47 25.91 2HP 1.25

1 AL215P-116003 GEARMTR SEW KT47T 19.58 1.5HP BRK 1 7/16

1 AL14101RQD03 PHOTOELECTRIC SENSOR-POLARIZED REFLEX

1 680.000236 PROXIMITY SENSOR

620.115309 REFLECTOR, HEXAGONAL

AL889N-R3AFC-6F MINI QD CORDSET. 3 PIN. 6FT. 90 DEG. FEMALE

1 AL206-9904 C/BRK DELTRAN CB-10 X 1-1/2 BORE W/O SPR

1 AL272-070420 BELT TIMING 420H150

1 AL260-0520 BSHG TL 1615 X 1-1/2

AL257-0338 END ROLLER GALV 2-1/2 DIA X 38.88 LG

AL228-90020 COLLAR CLAMPING 2 PC X 1-1/2 BORE

1 AL221-032000 BRG SLMSTR SKWZ-LOC 2BPB-1 1/2 MH PLUG

1 AL221-041900 BRG SLMSTR SKWZ-LOC 2BFB-1 7/16 MH PLUG

AL221-9004 ROD END BRG L/H MALE 3/4 BORE

AL221-9003 ROD END BRG R/H MALE 3/4 BORE

AL339-210001 BELT VSUII E8/2 U0/V15 36"W X 110" LG

MT3LD2154-1TL53 DISCONNECT SWITCH

6603-30-12 PULLEY, DRIVE

AL52PA6G9A PUSH BUTTON SIEMENS #52PA6G9A

AL52PA8A1K PUSH BUTTON SIEMENS #52PA8A1K

AL52PA6G3A PUSH BUTTON SIEMENS #52PA6G3A

AL52PA2G2A PUSH BUTTON SIEMENS #52PA2G2A

680.000226 SELECTOR SWITCH, THREE POSITION, SPRING RTRN

AL00024241 SWITCH, SELECTOR, 3 POS.,MAINT

AL42GRU-9203-QD PHOTOSENSOR, POLARIZED RETROREFLECTIVE 4PIN

QD

AL889N-F4AF6F CABLE, MINI QD CORDSET, 4 PIN, 6FT FEMALE

AL92-90 REFLECTOR, POLARIZED, WITH TABS

000420-17248 K57/DRN100LM4/2.2/38/M6A-0/-/-/35/-/E

001690-80135 Compression spring 8,0x40,0x135 squared ground DIN17223-1.1200 DIN2095

001696-10000 Spring cotter BOW-120-12, RD3x70 zinc plated

002371-56005 Nut hex lock Nyloc M5 ISO10511/DIN985 CL 5

DIN267 ZP

002371-56007 Nut hex lock Nyloc M6 ISO10511/DIN985 CL 5

DIN267 ZP

002371-56010 Nut hex lock Nyloc M10 ISO10511/DIN985 CL 5

DIN267 ZP

002746-00020 Ring retaining shaft A20 DIN471 Ck 75

004785-00018 Rosta tension element SE-18

004888-34923 Poly-V belt, PL ribbed profile, L=3492mm z=12

004903-00036 Free wheel clutch right GFR-35-F1F2/ R

004904-00404 Bearing ball 6003/2RS-C3-17 ISO15-1981

004904-00407 Bearing ball 6006/2RS-C3-30 ISO15-1981

006881-00055 Sheet metal plug ø25,4mm

Vanderlande Make-up Unit

Seimens VSU

LGB QTY Part Number Description Manufacturer

011308-266-00001 Assy slatconnector

012607-151-00001 Assy pressure roll

012607-153-00001 Tension rol Ø50 mm

012607-289-00001 Wheel rnd 55

012607-456-00001 Axle Tension Pulley

012607-472-00002 Rosta Pressure Unit

012607-472-00003 Rosta Pressure Unit

013104-116-00275 Tension bolt M12

013104-644-00001 Tension spring washer

013104-645-00001 SBA tension pulley v-belt stc: 205mm type: TB-

12-PL-198

013104-646-00001 SBA Assy tension pulley v-belt stc: 205mm type:

TB-12-PL-198

013117-104-00001 Assy Tilted Carrier 25°

013117-141-00001 Assy brush Triplanar Tilted CW

013117-328-00004 Assy Chain Link

013117-250-00001 Side slat clockwise

013117-254-00001 Excentre lock bush

013117-255-00001 Excentre distance bush

013117-256-00001 Assy wheel ø90 x 22,5

013117-264-00001 Spring carrier bolt 2-D chain triplaner

0L8322-00001 Assy STL ST slat TT CW

0P8341-00001 ST STEEL SLAT TT CLOCKWISE

1489-M1C400 UL489/CSA CIRCUIT BREAKER, 1-POLE, 40A Allen-Bradley

1492-A1B8 BUS BAR Allen-Bradley

1492-AAT1LP Terminal Power Feed 35mm sq for 1-phase bus bar

Allen-Bradley

1492-A1E End Cover for 1-phase busbar Allen-Bradley

1756-EN2T CONTROLLOGIX ETHERNET COMM.

MODULE

Allen-Bradley

1794-AENT FLEX I/O ETHERNET ADAPTOR Allen-Bradley

1794-IB16 INPUT MODULE, 16 PT., 24 VDC Allen-Bradley

1794-OB16 OUTPUT MODULE, 24 VDC Allen-Bradley

1794-TB2 FLEX I/O TERMINAL BASE Allen-Bradley

1794-TB3 FLEX I/O TERMINAL BASE Allen-Bradley

1492-J4-B TERMINAL BLOCK, 600V, 30A (6MM), BLUE Allen-Bradley

1492-EBJ3-B TERMINAL BLOCK, END PLATE, BLUE Allen-Bradley

1489-M3C070 CIRCUIT BREAKER, 3-POLE, 480V, 7 AMP Allen-Bradley

1492-CJJ6-10 JUMPER, SCREW CENTER, 6mm, 10-POLE, YELLOW

Allen-Bradley

1492-M6X12 MARKING CARD, 120/STRIP, 6MM BLANK ,

WHITE

Allen-Bradley

700-HK32Z24 CONTROL RELAY, 8A, DPDT, 24VDC Allen-Bradley

700-HN122 CONTROL RELAY SOCKET, 8-PIN SLIM LINE Allen-Bradley

1492-J3-B TERMINAL BLOCK, 600V, 20A (5mm), BLUE Allen-Bradley

1492-J3 TERMINAL BLOCK, 600V, 30A (5MM), GREY Allen-Bradley

1492-EBJ3 TERMINAL BLOCK, END PLATE, GRAY Allen-Bradley

1492-SPM1C050 CIRCUIT BREAKER, SUPPLEMENTARY

PROTECTOR, 1-POLE, 5A

Allen-Bradley

1492-CJJ5-10 TOP JUMPER, 10 POS. (5mm) Allen-Bradley

1492-M5X12 MARKING STRIP, 144/STRIP, 5MM BLANK,

WHITE

Allen-Bradley

1734-AENTR POINT I/O, ETHERNET ADAPTOR,

REDUNDANT

Allen-Bradley

1734-IB4 POINT I/O, INPUT MODULE, 24VDC, 4PT Allen-Bradley

1734-FPD POINT I/O, FIELD POWER DISTRIBUTION

MODULE

Allen-Bradley

Controls/Electrical

LGB QTY Part Number Description Manufacturer

1734-OW4 POINT I/O, OUTPUT MODULE, RELAY, 4PT Allen-Bradley

1734-TB POINT I/O MOUNTING BASE Allen-Bradley

1585D-K4TBJM-1 RECEPTACLE Allen-Bradley

888N-M3AF1-3F RECEPTACLE, MINI PLUS, MALE, 3-PIN,

16AWG, 3 FT.

Allen-Bradley

1585D-D4TBJM-1 Cable, Ethernet Connectivity, RJ45 to Female Front, 1m, IP20 to IP67

Allen-Bradley

1492-SPM1C100 CIRCUIT BREAKER, SUPPLEMENTARY

PROTECTOR, 1-POLE, 10A

Allen-Bradley

800T-QAH2A ILLUMINATED PUSHBUTTON, w/GUARD, LED, 12-

130V AC/DC, 1NO/1NC, AMBER

Allen-Bradley

800T-QAH2W ILLUMINATED PUSHBUTTON, w/GUARD, LED, 12-

130V AC/DC, 1NO/1NC, WHITE

Allen-Bradley

1606-XLS960E-3 POWER SUPPLY, 24VDC, 960W, 3-PHASE

480V

Allen-Bradley

800T-FXQH2RA1 ILLUM PUSH BUTTONB, PUSH/PULL, 1NO/1NCLB,

RED, UNIVERSAL, 12-130V AC/DC, LED

Allen-Bradley

800T-N314 PUSH/PULL PADLOCK ATTACHMENT Allen-Bradley

800T-A1A PUSH BUTTON, FLUSH HEAD, GREEN Allen-Bradley

800T-A2A PUSH BUTTON, FLUSH HEAD, BLACK Allen-Bradley

800T-H33A SELECTOR SWITCH, 2-POS, KEYED,

MAINTAINED

Allen-Bradley

855E-B24SA3 STACK LIGHT WARNING HORN , 50MM Allen-Bradley

855E-24TL4 CONTROL TOWER STACK LIGHT, 24V AC/DC FULL

VOLTAGE, STEADY LED, RED

Allen-Bradley

194R-PY Red/Yellow Padlockable handle, Standard Allen-Bradley

855E-24TL5 CONTROL TOWER STACK LIGHT, 24V AC/DC FULL

VOLTAGE, STEADY LED, AMBER

Allen-Bradley

855E-BCBC CONTROL STACK LIGHT BASE w/ CAP, 50mm, 1/2" NPT

Allen-Bradley

855E-24TL7 CONTROL TOWER STACK LIGHT, 24V AC/DC FULL

VOLTAGE, STEADY LED, CLEAR

Allen-Bradley

42GRU-9200-QD RETRO PHOTOSENSOR, POLARIZED, 24VDC,

MICRO

Allen-Bradley

60-2513 PHOTOSENSOR MOUNTING ASSEMBLY,

5"

Allen-Bradley

1492-J4 TERMINAL BLOCK, 600V, 30A (6MM) Allen-Bradley

1492-JG4 TERMINAL BLOCK, GROUND, M 4/6.P Allen-Bradley

194E-A16-1753 Disconnect Switch, Non-Fused, 3P, 2-Position, 16A Allen-Bradley

1734-IA4 POINT I/O, INPUT MODULE, 120VAC, 4PT Allen-Bradley

1734-AENT POINT I/O CONTROLNET ADAPTER Allen-Bradley

1734-232ASC POINT I/O ASCII MODULE Allen-Bradley

1492-SPM1C020 CIRCUIT BREAKER, SUPPLEMENTARY PROTECTOR, 1-

POLE, 2A

Allen-Bradley

194L-G3394 Metal Shaft Extension with Padlock Provision (230-

350mm)

Allen-Bradley

700S-CF620EJC SAFETY CONTROL RELAY 6NO-2NC 24VDC COIL Allen-Bradley

LPCG757 STRAIN RELIEF CORD CONNECTOR, 3/4", 0.385-0.750 Arlington Industries

LPCG50 STRAIN RELIEF, 1/2 STR CORD CONNECTOR Arlington Industries

6200A-S6501 3" REFLECTOR Cutler-Hammer

BSB40 TERMINAL STAND-OFF BRACKET, 2" (40mm) E-Rail

TA-6-S GROUNDING LUG, 1-COND, 4-14AWG Ilsco

LS3408-ER20005R SCANNER, EXTENDED RANGE, SCANNER ONLY,

YELLOW/TWILIGHT BLACK

Motorola

HS20.5-P64AJ/8-30-S3 ENCODER, Photocraft

PK15GTA GROUNDING STRIP, 15 TERMS Schneider

PK9GTA LOAD CENTER EQUIPMENT GROUND BAR ASSY Schneider

LGB QTY Part Number Description Manufacturer

RKM126-2M CONNECTOR, FEMALE STRAIGHT, YEL PVC, 12-PIN,

12#16AWG, 6'

Turck

RKM86-2M CONNECTOR, FEMALE STRAIGHT, YELLOW TPU, 8-PIN,

8#16AWG, 6'

Turck

RSF44-0.5M/NPT RECEPTACLE, MALE, 4-POLE, 4#12AWG, 12" Turck

RSF126-0.3M/14.5/NPT RECEPT, MALE, FRONT MOUNT 12-PIN, 12#16AWG,

600VAC/DC

Turck

RSF86-0.3M/14.5/NPT RECEPTACLE, MALE, 8-POLE, 8#16AWG, 12" Turck

Spare Parts storage shelfing

LGB QTY Part Number Description Manufacturer

4 F2B-SXR-107-ABHS 2 Bolt Bearings

2 F4B-SXR-111-ABHS 4 Bolt Bearings

2 WSTU-SXR-107-ABHS Take-up Bearings

2 FC-SXR-111-ABHS Ticket Counter Bearings

2 FBMH23T Bearing - SEALMASTER SEALMASTER

1 2062454 Cloning Modules w/ Blower Cntr’l & Restrictor

2 4028998 Blower Fan Filters

1 AL215P-116003 GEARMTR SEW KT47T 19.58 1.5HP BRK 1 7/16

1 AL14101RQD03 PHOTOELECTRIC SENSOR-POLARIZED REFLEX

1 680.000236 PROXIMITY SENSOR

1 AL206-9904 C/BRK DELTRAN CB-10 X 1-1/2 BORE W/O SPR

1 AL272-070420 BELT TIMING 420H150

1 AL260-0520 BSHG TL 1615 X 1-1/2

1 AL221-032000 BRG SLMSTR SKWZ-LOC 2BPB-1 1/2 MH PLUG

1 AL221-041900 BRG SLMSTR SKWZ-LOC 2BFB-1 7/16 MH PLUG

1 001690-80135 Compression spring 8,0x40,0x135 squared ground

DIN17223-1.1200 DIN2095

1 004903-00036 Free wheel clutch right GFR-35-F1F2/ R

1 004904-00404 Bearing ball 6003/2RS-C3-17 ISO15-1981

1 004904-00407 Bearing ball 6006/2RS-C3-30

ISO15-1981

5 011308-266-00001 Assy slatconnector

1 012607-151-00001 Assy pressure roll

1 012607-153-00001 Tension rol Ø50 mm

1 012607-289-00001 Wheel rnd 55

1 012607-456-00001 Axle Tension Pulley

1 012607-472-00002 Rosta Pressure Unit

1 012607-472-00003 Rosta Pressure Unit

1 013104-645-00001 SBA tension pulley v-belt stc:

205mm type: TB-12-PL-198

1 013104-646-00001 SBA Assy tension pulley v-belt stc: 205mm type: TB-12-PL-198

1 013117-104-00001 Assy Tilted Carrier 25°

1 013117-141-00001 Assy brush Triplanar Tilted CW

1 013117-328-00004 Assy Chain Link

1 013117-250-00001 Side slat clockwise

1 013117-254-00001 Excentre lock bush

1 013117-255-00001 Excentre distance bush

5 013117-256-00001 Assy wheel ø90 x 22,5

1 013117-264-00001 Spring carrier bolt 2-D chain triplaner

1 0L8322-00001 Assy STL ST slat TT CW

1 0P8341-00001 ST STEEL SLAT TT CLOCKWISE

1 42GRU-9200-QD RETRO PHOTOSENSOR,

POLARIZED, 24VDC, MICRO

Allen-Bradley

1 HS20.5-P64AJ/8-30-S3 ENCODER, Photocraft

2 68.0020.001-35 Paddle Belt

4 004888-34923 Poly-V belt, PL ribbed profile, L=3492mm z=12

LGB QTY Part Number Description Manufacturer

0 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 33.71) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 24.88) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW-BRE 20 HL RG (Ratio 24.88) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 20.00) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW-BRE 20 HL RG (Ratio 33.71) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 43.28) 1.5 HP NORD Gear

0 SK572.1VL-90 SP/4 CUS TW (Ratio 42.38) 1.5 HP NORD Gear

0 SK572.1VL-90 SP/4 CUS TW (Ratio 24.58) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW (Ratio 17.46) 1.5 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 10.16) 2.0 HP NORD Gear

0 SK572.1VL-90 LP/4 CUS TW (Ratio 21.85) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW-BRE 20 HL RG (Ratio 24.88) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 15.56) 2.0 HP NORD Gear

0 SK572.1VL-90 LP/4 CUS TW (Ratio 12.68) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 12.84) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 20.00) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 17.46) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW (Ratio 24.88) 2.0 HP NORD Gear

0 SK 92672.1AMMHD-90 LP/4 CUS TW-BRE 20 HL RG (Ratio 33.71) 2.0 HP NORD Gear

0 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 17.08) 3.0 HP NORD Gear

0 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 21.14) 3.0 HP NORD Gear

0 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 28.38) 3.0 HP NORD Gear

0 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 31.85) 3.0 HP NORD Gear

0 SK 92772.1AMMHD-100 LP/4 CUS TW (Ratio 39.32) 3.0 HP NORD Gear

0 SK 92772.1AMMHD-100 LP/4 CUS TW-BRE 40 HL RG (Ratio 39.32) 3.0 HP NORD Gear

0 SK 92772.1 AMMHD-LP/4 CUS TW (Ratio 12.50) 3.0HP NORD Gear

0 SK 92772.1 AMMHD-100 LP/4 CUS TW-BRE 40 HL RG (Ratio 15.42) 3.0 HP NORD Gear

0 SK 92772.1 AMMHD-LP/4 CUS TW -BRE 40 HL RG (19:17) 3.0 HP NORD Gear

0 SK 92672.1AMMHD-90 SP/4 CUS TW-BRE 20

HL RG (Ratio 43.28)

1.5 HP

NORD Gear

LGB QTY Part Number Description Manufacturer

1 Forbo GSTR Curve conveyor belt C48_39-90 Flow-Turn

1 Forbo GSTR Curve conveyor belt C48_39-45 Flow-Turn

1 Forbo GSTR Curve conveyor belt C48_39-52 Flow-Turn

1 Habasit Roughtop 447 Spiral Curve Belt C 48_39-90-9 Flow-Turn

1 Habasit Roughtop 447 Spiral Curve Belt C 48_39-90-22 Flow-Turn

1 Habasit Roughtop 447 Spiral Curve Belt C 48_39-90-18 Flow-Turn

1 1-7/16 SHAFT 1 7/16" Shaft (Drive) Flow-Turn

1 1-7/16 SHAFT 1 7/16" Shaft (Tail) Flow-Turn

2 50B27 Sprocket (Part # 50B27) TSUBAKI

1 set top & bottom 45° Nylon Wear Guides Flow-Turn

1 set top & bottom 52° Nylon Wear Guides Flow-Turn

1 set top & bottom 90° Nylon Wear Guides Flow-Turn

4 0 Bearing - Cover SEALMASTER

10 0 Rivet and Washer Set Flow-Turn

10 0 Nylon Bushing Flow-Turn

10 0 Grommets Flow-Turn

Oversize Power Turns

1 Forbo GSTR Curve conveyor belt O 60_57-22.5 Flow-Turn

1 1-7/16 SHAFT 1 7/16" Shaft (Drive) Flow-Turn

1 1-7/16 SHAFT 1 7/16" Shaft (Tail) Flow-Turn

1 set top & bottom 22.5° Nylon Wear Guides Flow-Turn