AD_P_1377_17_SPI.pdf

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson

Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

CARTRIDGE, AIRCRAFT, FIRE EXTINGUISHER # 59678 (AD) P 1377-17

4. NATIONAL STOCK NO. 5.DATE OF DRAWING/SPI

(YYMMDD)

6. REVISION / ERR NO.

# 170905 -

7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.

FT.)(0.000)

11. UNIT PACK SIZE (INCHES)(00.0)

1 EA 2.2 0.037 4” x 4” x 4” 18.

STEPS

19.

REQD

20.

DESCRIPTION

12. MILITARY PRESERVATION 1 1 4” X 6” ANTI-STATIC BAG MIL-DTL-117, TYPE I,

CLASS F, STYLE 1

MIL-STD-2073-1 METHOD 41 2 AR PPP-C-795, CLASS 2 ANTISTATIC BUBBLE WRAP or

A-A-59135, CLASS 1, GRADE B

13. CLEANING 3 1 ASTM- D5118, CLASS WR 4” X 4” X 4”

MIL-STD-2073-1 4 1 ASTM-D5118, CLASS WR 14” X 14” X 14”

14. DRYING 5 AR ASTM -D4727, CLASS WR SPACERS

MIL-STD-2073-1 6 1 ASTM- D1974, CLOSURE METHOD 2B3, SEALING

METHOD A

15. PACKING 7 AR SECURITY TAPE/TAMPER EVIDENT TAPE

a. LEVEL A

MIL-STD-2073-1

b. LEVEL B

MIL-STD-2073-1

16. MARKING

MIL-STD-129, Para 5.14

17. NOTES/DRAWING: # SEE ITEM CHART ON PAGE 2.

A. UNIT PACK REQUIREMENTS: PLACE EACH CARTRIDGE INTO A 4” X 6” ANTI-STATIC BAG (STEP 1). WRAP EACH BAG WITH PPP-C-795, CLASS 2 ANTISTATIC BUBBLE WRAP (STEP 2). PLACE EACH CARTRIDGE INTO A 4” X 4” X 4” FIBERBOARD BOX (STEP 3). PLACE UP TO 27 BOXED CARTRIDGES INTO A 14” X 14” X 14” ASTM 5118 FIBERBOARD BOX (STEP 4). PLACE SPACERS (STEP 5) TO ENSURE TIGHT FIT. SEAL THE 14” X 14” X 14” CONTAINER USING ASTM D1974 (STEP 6). SEAL FIBERBOARD BOX WITH SECURITY TAPE/TAMPER EVIDENT TAPE

(STEP 7)

B. MARKING SHALL BE IN ACCORDANCE WITH THE AMMUNITION MARKING REQUIREMENTS OF MIL-STD-129

AND INCLUDE AS A MINIMUM:

IDENTIFICATION MARKING:

NSN/DODIC

QUANTITY

NOMENCLATURE

LOT NUMBER/SERIAL NUMBER

PACKAGE GROSS WEIGHT

SPI (AD) P1377-17

HAZARD LABEL 1.4S

THE PROPER SHIPPING NAME AND IDENTIFICATION NUMBER (SEE HAZARD CLASS CHART ON PAGE 2)

THE PERFORMANCE ORIENTED PACKAGING MARKING ARE AS FOLLOWS:

4G/Y1/S/** ** INSERT LAST TWO DIGITS OF YEAR PACKED

USA/DOD/AYD

ITEM SIZE: # ITEM WEIGHT: # APPROVED:

DISTRIBUTION STATEMENT A; APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DD Form 2169C, JUN 97 Previous editions are obsolete Page 1 of 2 Pages u n

PENNOCK.AMANDA.C.1380042157

Digitally signed by PENNOCK.AMANDA.C.1380042157 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=PENNOCK.AMANDA.C.1380042157 Date: 2017.10.03 14:42:36 -05'00'

DISTRIBUTION STATEMENT A; APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DD Form 2169C, JUN 97 Previous editions are obsolete Page 2 of 2 Pages

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

CARTRIDGE, AIRCRAFT, FIRE EXTINGUISHER # 59678 (AD) P 1377-17

4. NATIONAL STOCK NO. 5.DATE OF SPI

(YYMMDD)

6. REVISION / ERR NO.

# 170905 -

17. NOTES/DRAWING

C. CONSOLIDATION FOR SHIPMENT:

1.) UNIT PACKAGES MAY SERVE AS THE SHIPPING CONTAINER AND SHALL BE MARKED WITH THE IDENTIFICATION MARKINGS. PROPER SHIPPING NAME, SERIAL NUMBER, HAZARD LABEL, AND POP

MARKINGS. UNIT PACKAGES MUST BE OVERPACKED FOR FIRST DESTINATION SHIPMENT.

NOTE: MIXING OF DODIC’S IN SAME OVERPACK CONTAINER IS NOT AUTHORIZED.

2.) EXTERIOR CONTAINERS (LEVEL A OR B) SHALL BE SELECTED FROM THE TABLE C-II IN MIL-STD-2073-1 OR SELECT THE 14” X 14” X 14” FIBERBOARD BOX (ITEM 4). THE OVER PACK CONTAINER MUST BE MARKED WITH THE IDENTIFICATION MARKINGS, PROPER SHIPPING NAME, SERIAL NUMBER, HAZARD LABEL, AND MARKED WITH “OVERPACK” IN ONE INCH HIGH LETTERS (MINIMUM) ON THE PACKAGE AND ALL SHIPPING PAPERS". THE

POP MARKING IS NOT REQUIRED ON THE OVERPACK CONTAINER.

3.) SHIPMENT OF IDENTICAL ITEMS GOING TO THE SAME DESTINATION SHALL BE PALLETIZED IF THE TOTAL DISPLACEMENT IS 50 CUBIC FEET OR MORE. PALLET LOADS MUST BE STABLE AND TO THE MOST PART PROVIDE A LEVEL TOPSIDE FOR EASE IN STACKING. A PALLET LOAD SHALL NOT EXCEED 4,000 LBS. AND SHOULD NOT EXCEED 52 INCHES IN LENGTH OR WIDTH. THE HEIGHT SHOULD BE NO TALLER THAN 54 INCHES AND AT LEAST ONE OF THE HORIZONTAL DIMENSIONS MUST BE LESS THAN 47 INCHES (MAX.) A FOUR-WAY ENTRY PALLET OR PALLET BOX SHALL BE USED TO CONTAIN THE LOAD IN A MANNER THAT WILL PERMIT SAFE MULTIPLE REHANDLING DURING SHIPMENT AND STORAGE. PALLETIZED LOADS MUST BE MARKED PER MIL-STD-129.

D. PERFORMANCE ORIENTED PACKAGING (POP) PERIODIC RETESTING REQUIREMENTS:

1) PRIOR TO SHIPMENT, THE CONTRACTOR SHALL ENSURE THAT THE COMBINATION PACKAGING HAS BEEN TESTED FOR COMPLIANCE WITH POP PERIODIC RETESTING REQUIREMENTS IN ACCORDANCE WITH TITLE 49 CODE OF FEDERAL REGULATIONS PARAGRAPH 178.600. POP MARKINGS PROVIDED IN THIS SPI SHALL NOT

BE APPLIED TO THE CONTAINER UNTIL TEST RESULTS ARE VERIFIED BY THE GOVERNMENT.

2) A POP TEST REPORT SHALL BE GENERATED IN ACCORDANCE WITH DATA ITEM DESCRIPTION DI-PACK-81059 FOLLOWING THE TESTS AND PROVIDED TO ARDEC, ATTN: RDAR-EIL-TP, ROCK ISLAND, IL 61299-7300.

3) ONLY ONE TEST IS REQUIRED FOR THE MULTIPLE NSN’S COVERED THE SAME SPECIAL PACKAGING

INSTRUCTION.

HAZARD CLASS INFORMATION CHART

DODIC QUP UN PROPER SHIPPING NAME UN SERIAL NO. LABEL N.E.W.

MT20 1 CARTRIDGES POWER DEVICE 0323 1.4S 0.000860

TY60 1 CARTRIDGES POWER DEVICE 0323 l.4S 0.000677 TY61 1 CARTRIDGES POWER DEVICE 0323 l.4S 0.000677

ITEM CHART

NSN DODIC ITEM SIZE ITEM

WT

NOMENCLATURE AND

PART NUMBER

1377-01-660-5593 MT20 2.8 x 1 x 1.3 0.145 CARTRIDGE, CT01600-1 1377-01-660-5588 TY60 2.8 x 1 x 1.3 0.130 CARTRIDGE, CT01700-1 1377-01-660-5592 TY61 2.8 x 1 x 1.3 0.130 CARTRIDGE, CT02400-1